From: Yong Zhang <yong.zhang0@gmail.com>
To: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>, LKML <linux-kernel@vger.kernel.org>,
David Daney <ddaney.cavm@gmail.com>,
Thomas Gleixner <tglx@linutronix.de>
Subject: Re: [PATCH] clocksource: Avoid selecting mult values that might overflow when adjusted
Date: Tue, 8 Nov 2011 13:02:59 +0800 [thread overview]
Message-ID: <20111108050259.GA13225@zhy> (raw)
In-Reply-To: <1320721740.10668.23.camel@work-vm>
[-- Attachment #1: Type: text/plain, Size: 9533 bytes --]
On Mon, Nov 07, 2011 at 07:09:00PM -0800, John Stultz wrote:
> Yong: Can you also give this a test run to make sure you don't see any
> problems?
Still get warning (3.2-rc1 + your patch):
[ 0.017009] ------------[ cut here ]------------
[ 0.022156] WARNING: at /build/linux/kernel/time/timekeeping.c:828 do_timer+0x402/0x4e0()
[ 0.035917] Adjusting jiffies more then 11% (1024068096 vs 1024064000)
[ 0.043189] Modules linked in:
[ 0.046600] Pid: 0, comm: swapper Not tainted 3.2.0-rc1-10884-g63c2ac8-dirty #17
[ 0.054841] Call Trace:
[ 0.057563] <IRQ> [<ffffffff81050edf>] warn_slowpath_common+0x7f/0xc0
[ 0.064949] [<ffffffff81050fd6>] warn_slowpath_fmt+0x46/0x50
[ 0.071352] [<ffffffff810829e2>] do_timer+0x402/0x4e0
[ 0.077078] [<ffffffff81088a8a>] tick_periodic+0x5a/0x70
[ 0.083094] [<ffffffff81088ac4>] tick_handle_periodic+0x24/0x80
[ 0.089789] [<ffffffff8100482d>] timer_interrupt+0x1d/0x30
[ 0.096000] [<ffffffff810cb9bd>] handle_irq_event_percpu+0x8d/0x360
[ 0.103080] [<ffffffff810cbcd8>] handle_irq_event+0x48/0x70
[ 0.109386] [<ffffffff810cf0be>] ? handle_level_irq+0x1e/0xe0
[ 0.115886] [<ffffffff810cf112>] handle_level_irq+0x72/0xe0
[ 0.122191] [<ffffffff81004002>] handle_irq+0x22/0x30
[ 0.127917] [<ffffffff815f256d>] do_IRQ+0x5d/0xe0
[ 0.133256] [<ffffffff815ef6b0>] common_interrupt+0x70/0x70
[ 0.139561] <EOI> [<ffffffff810425de>] ? sub_preempt_count+0xe/0xe0
[ 0.146751] [<ffffffff815ef4a8>] ? _raw_spin_unlock_irqrestore+0x38/0x80
[ 0.154315] [<ffffffff81052136>] ? vprintk+0x316/0x4d0
[ 0.160139] [<ffffffff815e146d>] ? calibrate_delay+0x4e4/0x504
[ 0.166727] [<ffffffff815ea3d0>] printk+0x68/0x70
[ 0.172067] [<ffffffff81acc9ce>] pidmap_init+0x6e/0xbd
[ 0.177891] [<ffffffff81ab7be7>] start_kernel+0x312/0x38a
[ 0.184004] [<ffffffff81ab7321>] x86_64_start_reservations+0x131/0x135
[ 0.191375] [<ffffffff81ab7412>] x86_64_start_kernel+0xed/0xf4
[ 0.198109] ---[ end trace 4eaa2a86a8e2da22 ]---
Full dmesg is attached.
Thanks,
Yong
>
> thanks
> -john
>
> >From 82c5b70fc5074b6bb6e05514afb6e9c73c740422 Mon Sep 17 00:00:00 2001
> From: John Stultz <john.stultz@linaro.org>
> Date: Mon, 31 Oct 2011 17:06:35 -0400
> Subject: [PATCH] clocksource: Avoid selecting mult values that might overflow when adjusted
>
> For some frequqencies, the clocks_calc_mult_shift() function will
> unfortunately select mult values very close to 0xffffffff. This
> has the potential to overflow when NTP adjusts the clock, adding
> to the mult value.
>
> This patch adds a clocksource.maxadj value, which provides
> an approximation of an 11% adjustment(NTP limits adjustments to
> 500ppm and the tick adjustment is limited to 10%), which could
> be made to the clocksource.mult value. This is then used to both
> check that the current mult value won't overflow/underflow, as
> well as warning us if the timekeeping_adjust() code pushes over
> that 11% boundary.
>
> v2: Fix max_adjustment calculation, and improve WARN_ONCE
> messages.
>
> CC: Yong Zhang <yong.zhang0@gmail.com>
> CC: David Daney <ddaney.cavm@gmail.com>
> CC: Thomas Gleixner <tglx@linutronix.de>
> Reported-by: Chen Jie <chenj@lemote.com>
> Reported-by: zhangfx <zhangfx@lemote.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> include/linux/clocksource.h | 3 +-
> kernel/time/clocksource.c | 58 +++++++++++++++++++++++++++++++++++-------
> kernel/time/timekeeping.c | 6 ++++
> 3 files changed, 56 insertions(+), 11 deletions(-)
>
> diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
> index 139c4db..c86c940 100644
> --- a/include/linux/clocksource.h
> +++ b/include/linux/clocksource.h
> @@ -156,6 +156,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc,
> * @mult: cycle to nanosecond multiplier
> * @shift: cycle to nanosecond divisor (power of two)
> * @max_idle_ns: max idle time permitted by the clocksource (nsecs)
> + * @maxadj maximum adjustment value to mult (~11%)
> * @flags: flags describing special properties
> * @archdata: arch-specific data
> * @suspend: suspend function for the clocksource, if necessary
> @@ -172,7 +173,7 @@ struct clocksource {
> u32 mult;
> u32 shift;
> u64 max_idle_ns;
> -
> + u32 maxadj;
> #ifdef CONFIG_ARCH_CLOCKSOURCE_DATA
> struct arch_clocksource_data archdata;
> #endif
> diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
> index cf52fda..cfc65e1 100644
> --- a/kernel/time/clocksource.c
> +++ b/kernel/time/clocksource.c
> @@ -492,6 +492,22 @@ void clocksource_touch_watchdog(void)
> }
>
> /**
> + * clocksource_max_adjustment- Returns max adjustment amount
> + * @cs: Pointer to clocksource
> + *
> + */
> +static u32 clocksource_max_adjustment(struct clocksource *cs)
> +{
> + u64 ret;
> + /*
> + * We won't try to correct for more then 11% adjustments (110,000 ppm),
> + */
> + ret = (u64)cs->mult * 11;
> + do_div(ret,100);
> + return (u32)ret;
> +}
> +
> +/**
> * clocksource_max_deferment - Returns max time the clocksource can be deferred
> * @cs: Pointer to clocksource
> *
> @@ -503,25 +519,28 @@ static u64 clocksource_max_deferment(struct clocksource *cs)
> /*
> * Calculate the maximum number of cycles that we can pass to the
> * cyc2ns function without overflowing a 64-bit signed result. The
> - * maximum number of cycles is equal to ULLONG_MAX/cs->mult which
> - * is equivalent to the below.
> - * max_cycles < (2^63)/cs->mult
> - * max_cycles < 2^(log2((2^63)/cs->mult))
> - * max_cycles < 2^(log2(2^63) - log2(cs->mult))
> - * max_cycles < 2^(63 - log2(cs->mult))
> - * max_cycles < 1 << (63 - log2(cs->mult))
> + * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
> + * which is equivalent to the below.
> + * max_cycles < (2^63)/(cs->mult + cs->maxadj)
> + * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
> + * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
> + * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
> + * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
> * Please note that we add 1 to the result of the log2 to account for
> * any rounding errors, ensure the above inequality is satisfied and
> * no overflow will occur.
> */
> - max_cycles = 1ULL << (63 - (ilog2(cs->mult) + 1));
> + max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
>
> /*
> * The actual maximum number of cycles we can defer the clocksource is
> * determined by the minimum of max_cycles and cs->mask.
> + * Note: Here we subtract the maxadj to make sure we don't sleep for
> + * too long if there's a large negative adjustment.
> */
> max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
> - max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult, cs->shift);
> + max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
> + cs->shift);
>
> /*
> * To ensure that the clocksource does not wrap whilst we are idle,
> @@ -640,7 +659,6 @@ static void clocksource_enqueue(struct clocksource *cs)
> void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
> {
> u64 sec;
> -
> /*
> * Calc the maximum number of seconds which we can run before
> * wrapping around. For clocksources which have a mask > 32bit
> @@ -661,6 +679,20 @@ void __clocksource_updatefreq_scale(struct clocksource *cs, u32 scale, u32 freq)
>
> clocks_calc_mult_shift(&cs->mult, &cs->shift, freq,
> NSEC_PER_SEC / scale, sec * scale);
> +
> + /*
> + * for clocksources that have large mults, to avoid overflow.
> + * Since mult may be adjusted by ntp, add an safety extra margin
> + *
> + */
> + cs->maxadj = clocksource_max_adjustment(cs);
> + while ((cs->mult + cs->maxadj < cs->mult)
> + || (cs->mult - cs->maxadj > cs->mult)) {
> + cs->mult >>= 1;
> + cs->shift--;
> + cs->maxadj = clocksource_max_adjustment(cs);
> + }
> +
> cs->max_idle_ns = clocksource_max_deferment(cs);
> }
> EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale);
> @@ -701,6 +733,12 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale);
> */
> int clocksource_register(struct clocksource *cs)
> {
> + /* calculate max adjustment for given mult/shift */
> + cs->maxadj = clocksource_max_adjustment(cs);
> + WARN_ONCE(cs->mult + cs->maxadj < cs->mult,
> + "Clocksource %s might overflow on 11%% adjustment\n",
> + cs->name);
> +
> /* calculate max idle time permitted for this clocksource */
> cs->max_idle_ns = clocksource_max_deferment(cs);
>
> diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
> index 2b021b0e..2c04610 100644
> --- a/kernel/time/timekeeping.c
> +++ b/kernel/time/timekeeping.c
> @@ -820,6 +820,12 @@ static void timekeeping_adjust(s64 offset)
> } else
> return;
>
> + WARN_ONCE(timekeeper.mult+adj >
> + timekeeper.clock->mult + timekeeper.clock->maxadj,
> + "Adjusting %s more then 11%% (%ld vs %ld)\n",
> + timekeeper.clock->name, (long)timekeeper.mult+adj,
> + (long)timekeeper.clock->mult +
> + timekeeper.clock->maxadj);
> timekeeper.mult += adj;
> timekeeper.xtime_interval += interval;
> timekeeper.xtime_nsec -= offset;
> --
> 1.7.3.2.146.gca209
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
Only stand for myself
[-- Attachment #2: 3.2-rc1.log --]
[-- Type: text/plain, Size: 60428 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc1-10884-g63c2ac8-dirty #17 SMP PREEMPT Tue Nov 8 12:48:41 CST 2011
[ 0.000000] Command line: root=/dev/sda1 console=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f4cf000 (usable)
[ 0.000000] BIOS-e820: 000000007f4cf000 - 000000007f62f000 (reserved)
[ 0.000000] BIOS-e820: 000000007f62f000 - 000000007f77f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f77f000 - 000000007f800000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f800000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000a0000000 - 00000000b0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fc000000 - 00000000fd000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: , BIOS Txx080_CRB
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f4cf max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000fd5a0] fd5a0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f4cf000
[ 0.000000] 0000000000 - 0040000000 page 1G
[ 0.000000] 0040000000 - 007f400000 page 2M
[ 0.000000] 007f400000 - 007f4cf000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f4cf000 @ 1fffd000-20000000
[ 0.000000] ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 000000007f7fd120 0006C (v01 INTEL THRLY 00000000 01000013)
[ 0.000000] ACPI: FACP 000000007f7fc000 000F4 (v04 INTEL THRLY 00000000 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 000000007f7f4000 075C1 (v02 INTEL THRLY 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACS 000000007f697000 00040
[ 0.000000] ACPI: APIC 000000007f7f3000 001CC (v02 INTEL THRLY 00000000 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 000000007f7f2000 0003C (v01 INTEL THRLY 00000001 MSFT 0100000D)
[ 0.000000] ACPI: HPET 000000007f7f1000 00038 (v01 INTEL THRLY 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SLIT 000000007f7f0000 00030 (v01 INTEL THRLY 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SRAT 000000007f7ef000 00430 (v02 INTEL THRLY 00000001 MSFT 0100000D)
[ 0.000000] ACPI: WDDT 000000007f7ee000 00040 (v01 INTEL THRLY 00000000 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 000000007f7ce000 1FDDC (v01 INTEL SSDT PM 00004000 INTL 20061109)
[ 0.000000] ACPI: DMAR 000000007f7cd000 001D0 (v01 INTEL THRLY 00000001 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007f4cf
[ 0.000000] On node 0 totalpages: 521308
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 9 pages reserved
[ 0.000000] DMA zone: 3916 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7073 pages used for memmap
[ 0.000000] DMA32 zone: 510254 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000
[ 0.000000] SMP: Allowing 24 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000)
[ 0.000000] setup_percpu: NR_CPUS:24 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 474 pages/cpu @ffff880079c00000 s1912064 r8192 d21248 u2097152
[ 0.000000] pcpu-alloc: s1912064 r8192 d21248 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
[ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514170
[ 0.000000] Kernel command line: root=/dev/nfs nfsroot=128.224.165.20:/export/pxeboot/vlm-boards/18775/rootfs rw ip=128.224.178.131::128.224.178.1:255.255.255.0:18775:eth0:off console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 1984824k/2085692k available (6098k kernel code, 460k absent, 100408k reserved, 2998k data, 2548k init)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:1280 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] kmemleak: Early log buffer exceeded, please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 6367 kB
[ 0.000000] per task-struct memory footprint: 2688 bytes
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] ODEBUG: 31 of 31 active objects replaced
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2400.283 MHz processor.
[ 0.000010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.56 BogoMIPS (lpj=9601132)
[ 0.011869] pid_max: default: 32768 minimum: 301
[ 0.017009] ------------[ cut here ]------------
[ 0.022156] WARNING: at /build/linux/kernel/time/timekeeping.c:828 do_timer+0x402/0x4e0()
[ 0.035917] Adjusting jiffies more then 11% (1024068096 vs 1024064000)
[ 0.043189] Modules linked in:
[ 0.046600] Pid: 0, comm: swapper Not tainted 3.2.0-rc1-10884-g63c2ac8-dirty #17
[ 0.054841] Call Trace:
[ 0.057563] <IRQ> [<ffffffff81050edf>] warn_slowpath_common+0x7f/0xc0
[ 0.064949] [<ffffffff81050fd6>] warn_slowpath_fmt+0x46/0x50
[ 0.071352] [<ffffffff810829e2>] do_timer+0x402/0x4e0
[ 0.077078] [<ffffffff81088a8a>] tick_periodic+0x5a/0x70
[ 0.083094] [<ffffffff81088ac4>] tick_handle_periodic+0x24/0x80
[ 0.089789] [<ffffffff8100482d>] timer_interrupt+0x1d/0x30
[ 0.096000] [<ffffffff810cb9bd>] handle_irq_event_percpu+0x8d/0x360
[ 0.103080] [<ffffffff810cbcd8>] handle_irq_event+0x48/0x70
[ 0.109386] [<ffffffff810cf0be>] ? handle_level_irq+0x1e/0xe0
[ 0.115886] [<ffffffff810cf112>] handle_level_irq+0x72/0xe0
[ 0.122191] [<ffffffff81004002>] handle_irq+0x22/0x30
[ 0.127917] [<ffffffff815f256d>] do_IRQ+0x5d/0xe0
[ 0.133256] [<ffffffff815ef6b0>] common_interrupt+0x70/0x70
[ 0.139561] <EOI> [<ffffffff810425de>] ? sub_preempt_count+0xe/0xe0
[ 0.146751] [<ffffffff815ef4a8>] ? _raw_spin_unlock_irqrestore+0x38/0x80
[ 0.154315] [<ffffffff81052136>] ? vprintk+0x316/0x4d0
[ 0.160139] [<ffffffff815e146d>] ? calibrate_delay+0x4e4/0x504
[ 0.166727] [<ffffffff815ea3d0>] printk+0x68/0x70
[ 0.172067] [<ffffffff81acc9ce>] pidmap_init+0x6e/0xbd
[ 0.177891] [<ffffffff81ab7be7>] start_kernel+0x312/0x38a
[ 0.184004] [<ffffffff81ab7321>] x86_64_start_reservations+0x131/0x135
[ 0.191375] [<ffffffff81ab7412>] x86_64_start_kernel+0xed/0xf4
[ 0.198109] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.203536] Security Framework initialized
[ 0.208112] SELinux: Disabled at boot.
[ 0.212530] Mount-cache hash table entries: 256
[ 0.219102] Initializing cgroup subsys debug
[ 0.223867] Initializing cgroup subsys cpuacct
[ 0.228840] Initializing cgroup subsys memory
[ 0.233801] Initializing cgroup subsys devices
[ 0.238767] Initializing cgroup subsys freezer
[ 0.243729] Initializing cgroup subsys net_cls
[ 0.248772] CPU: Physical Processor ID: 0
[ 0.253249] CPU: Processor Core ID: 0
[ 0.257343] mce: CPU supports 9 MCE banks
[ 0.261827] CPU0: Thermal monitoring enabled (TM1)
[ 0.267205] using mwait in idle threads.
[ 0.271663] ACPI: Core revision 20110623
[ 0.328706] ftrace: allocating 20698 entries in 82 pages
[ 0.341877] Switched APIC routing to physical flat.
[ 0.348026] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.394350] CPU0: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz stepping 02
[ 0.506819] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.514918] ... version: 3
[ 0.519387] ... bit width: 48
[ 0.523944] ... generic registers: 4
[ 0.528412] ... value mask: 0000ffffffffffff
[ 0.534334] ... max period: 000000007fffffff
[ 0.540255] ... fixed-purpose events: 3
[ 0.544723] ... event mask: 000000070000000f
[ 0.567757] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.582781] lockdep: fixing up alternatives.
[ 0.590924] Booting Node 0, Processors #1
[ 0.595511] smpboot cpu 1: start_ip = 94000
[ 0.706823] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.722529] lockdep: fixing up alternatives.
[ 0.727343] #2
[ 0.729088] smpboot cpu 2: start_ip = 94000
[ 0.838494] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.854326] lockdep: fixing up alternatives.
[ 0.859150] #3
[ 0.860905] smpboot cpu 3: start_ip = 94000
[ 0.970292] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.986144] lockdep: fixing up alternatives.
[ 0.990960] #4
[ 0.992715] smpboot cpu 4: start_ip = 94000
[ 1.102128] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.117919] lockdep: fixing up alternatives.
[ 1.122743] #5
[ 1.124499] smpboot cpu 5: start_ip = 94000
[ 1.233885] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.249714] lockdep: fixing up alternatives.
[ 1.254527] #6
[ 1.256273] smpboot cpu 6: start_ip = 94000
[ 1.365693] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.381513] lockdep: fixing up alternatives.
[ 1.386350] #7
[ 1.388106] smpboot cpu 7: start_ip = 94000
[ 1.497495] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.513312] lockdep: fixing up alternatives.
[ 1.518127] #8
[ 1.519883] smpboot cpu 8: start_ip = 94000
[ 1.629294] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.645115] lockdep: fixing up alternatives.
[ 1.649944] #9
[ 1.651699] smpboot cpu 9: start_ip = 94000
[ 1.761071] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.776901] lockdep: fixing up alternatives.
[ 1.781717] #10
[ 1.783568] smpboot cpu 10: start_ip = 94000
[ 1.892878] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.908699] lockdep: fixing up alternatives.
[ 1.913524] #11
[ 1.915375] smpboot cpu 11: start_ip = 94000
[ 2.024653] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.040494] lockdep: fixing up alternatives.
[ 2.045315] #12
[ 2.047168] smpboot cpu 12: start_ip = 94000
[ 2.156530] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.172292] lockdep: fixing up alternatives.
[ 2.177123] #13
[ 2.178967] smpboot cpu 13: start_ip = 94000
[ 2.288303] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.304091] lockdep: fixing up alternatives.
[ 2.308909] #14
[ 2.310760] smpboot cpu 14: start_ip = 94000
[ 2.420096] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.435890] lockdep: fixing up alternatives.
[ 2.440722] #15
[ 2.442573] smpboot cpu 15: start_ip = 94000
[ 2.551866] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.567679] lockdep: fixing up alternatives.
[ 2.572501] #16
[ 2.574353] smpboot cpu 16: start_ip = 94000
[ 2.683674] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.699477] lockdep: fixing up alternatives.
[ 2.704308] #17
[ 2.706151] smpboot cpu 17: start_ip = 94000
[ 2.815457] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.831272] lockdep: fixing up alternatives.
[ 2.836092] #18
[ 2.837945] smpboot cpu 18: start_ip = 94000
[ 2.947271] NMI watchdog enabled, takes one hw-pmu counter.
[ 2.963081] lockdep: fixing up alternatives.
[ 2.967914] #19
[ 2.969767] smpboot cpu 19: start_ip = 94000
[ 3.079076] NMI watchdog enabled, takes one hw-pmu counter.
[ 3.094870] lockdep: fixing up alternatives.
[ 3.099690] #20
[ 3.101542] smpboot cpu 20: start_ip = 94000
[ 3.210863] NMI watchdog enabled, takes one hw-pmu counter.
[ 3.226668] lockdep: fixing up alternatives.
[ 3.231501] #21
[ 3.233353] smpboot cpu 21: start_ip = 94000
[ 3.342593] NMI watchdog enabled, takes one hw-pmu counter.
[ 3.358463] lockdep: fixing up alternatives.
[ 3.363284] #22
[ 3.365136] smpboot cpu 22: start_ip = 94000
[ 3.474484] NMI watchdog enabled, takes one hw-pmu counter.
[ 3.490256] lockdep: fixing up alternatives.
[ 3.495080] #23 Ok.
[ 3.497513] smpboot cpu 23: start_ip = 94000
[ 3.606198] NMI watchdog enabled, takes one hw-pmu counter.
[ 3.614049] Brought up 24 CPUs
[ 3.617452] Total of 24 processors activated (115205.20 BogoMIPS).
[ 3.644588] devtmpfs: initialized
[ 3.650431] NET: Registered protocol family 16
[ 3.656100] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 3.664561] ACPI: bus type pci registered
[ 3.669161] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
[ 3.679544] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
[ 3.765496] PCI: Using configuration type 1 for base access
[ 3.776432] bio: create slab <bio-0> at 0
[ 3.781429] ACPI: Added _OSI(Module Device)
[ 3.786092] ACPI: Added _OSI(Processor Device)
[ 3.791051] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 3.796301] ACPI: Added _OSI(Processor Aggregator Device)
[ 3.818672] ACPI: EC: Look up EC in DSDT
[ 3.819537] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110623/dsopcode-236)
[ 3.830061] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88007e878d80), AE_AML_BUFFER_LIMIT (20110623/psparse-536)
[ 3.997261] ACPI: Interpreter enabled
[ 4.001350] ACPI: (supports S0 S1 S3 S5)
[ 4.005906] ACPI: Using IOAPIC for interrupt routing
[ 4.037382] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 4.049869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd])
[ 4.059288] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 4.059291] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 4.059294] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 4.059297] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000cbfff] (ignored)
[ 4.059300] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfedfffff] (ignored)
[ 4.059302] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfdffffff] (ignored)
[ 4.059351] pci 0000:00:00.0: [8086:3406] type 0 class 0x000600
[ 4.059502] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[ 4.059600] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 4.059641] pci 0000:00:01.0: PME# disabled
[ 4.059689] pci 0000:00:02.0: [8086:3409] type 1 class 0x000604
[ 4.059787] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 4.059794] pci 0000:00:02.0: PME# disabled
[ 4.059840] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604
[ 4.059939] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 4.059946] pci 0000:00:03.0: PME# disabled
[ 4.059993] pci 0000:00:04.0: [8086:340b] type 1 class 0x000604
[ 4.060091] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 4.060097] pci 0000:00:04.0: PME# disabled
[ 4.060144] pci 0000:00:05.0: [8086:340c] type 1 class 0x000604
[ 4.060243] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 4.060250] pci 0000:00:05.0: PME# disabled
[ 4.060297] pci 0000:00:06.0: [8086:340d] type 1 class 0x000604
[ 4.060394] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 4.060401] pci 0000:00:06.0: PME# disabled
[ 4.060447] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[ 4.060546] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 4.060553] pci 0000:00:07.0: PME# disabled
[ 4.060601] pci 0000:00:08.0: [8086:340f] type 1 class 0x000604
[ 4.060698] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
[ 4.060705] pci 0000:00:08.0: PME# disabled
[ 4.060751] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
[ 4.060850] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 4.060857] pci 0000:00:09.0: PME# disabled
[ 4.060903] pci 0000:00:0a.0: [8086:3411] type 1 class 0x000604
[ 4.061001] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 4.061007] pci 0000:00:0a.0: PME# disabled
[ 4.061053] pci 0000:00:0d.0: [8086:343a] type 0 class 0x000600
[ 4.061166] pci 0000:00:0d.1: [8086:343b] type 0 class 0x000600
[ 4.061278] pci 0000:00:0d.2: [8086:343c] type 0 class 0x000600
[ 4.061402] pci 0000:00:0d.3: [8086:343d] type 0 class 0x000600
[ 4.061519] pci 0000:00:0d.4: [8086:3418] type 0 class 0x000600
[ 4.061632] pci 0000:00:0d.5: [8086:3419] type 0 class 0x000600
[ 4.061743] pci 0000:00:0d.6: [8086:341a] type 0 class 0x000600
[ 4.061855] pci 0000:00:0d.7: [8086:341b] type 0 class 0x000600
[ 4.061958] pci 0000:00:0e.0: [8086:341c] type 0 class 0x000600
[ 4.062070] pci 0000:00:0e.1: [8086:341d] type 0 class 0x000600
[ 4.062182] pci 0000:00:0e.2: [8086:341e] type 0 class 0x000600
[ 4.062306] pci 0000:00:0e.3: [8086:341f] type 0 class 0x000600
[ 4.062418] pci 0000:00:0e.4: [8086:3439] type 0 class 0x000600
[ 4.062528] pci 0000:00:0f.0: [8086:3424] type 0 class 0x001101
[ 4.062678] pci 0000:00:10.0: [8086:3425] type 0 class 0x000800
[ 4.062813] pci 0000:00:10.1: [8086:3426] type 0 class 0x000800
[ 4.062945] pci 0000:00:11.0: [8086:3427] type 0 class 0x000800
[ 4.063080] pci 0000:00:11.1: [8086:3428] type 0 class 0x000800
[ 4.063215] pci 0000:00:13.0: [8086:342d] type 0 class 0x000800
[ 4.063237] pci 0000:00:13.0: reg 10: [mem 0xb1a03000-0xb1a03fff]
[ 4.063333] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 4.063340] pci 0000:00:13.0: PME# disabled
[ 4.063397] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[ 4.063534] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[ 4.063670] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[ 4.063800] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800
[ 4.063922] pci 0000:00:15.0: [8086:342f] type 0 class 0x000800
[ 4.064058] pci 0000:00:16.0: [8086:3430] type 0 class 0x000880
[ 4.064083] pci 0000:00:16.0: reg 10: [mem 0xfdf1c000-0xfdf1ffff 64bit]
[ 4.064220] pci 0000:00:16.1: [8086:3431] type 0 class 0x000880
[ 4.064245] pci 0000:00:16.1: reg 10: [mem 0xfdf18000-0xfdf1bfff 64bit]
[ 4.064381] pci 0000:00:16.2: [8086:3432] type 0 class 0x000880
[ 4.064406] pci 0000:00:16.2: reg 10: [mem 0xfdf14000-0xfdf17fff 64bit]
[ 4.064543] pci 0000:00:16.3: [8086:3433] type 0 class 0x000880
[ 4.064568] pci 0000:00:16.3: reg 10: [mem 0xfdf10000-0xfdf13fff 64bit]
[ 4.064705] pci 0000:00:16.4: [8086:3429] type 0 class 0x000880
[ 4.064730] pci 0000:00:16.4: reg 10: [mem 0xfdf0c000-0xfdf0ffff 64bit]
[ 4.064867] pci 0000:00:16.5: [8086:342a] type 0 class 0x000880
[ 4.064892] pci 0000:00:16.5: reg 10: [mem 0xfdf08000-0xfdf0bfff 64bit]
[ 4.065028] pci 0000:00:16.6: [8086:342b] type 0 class 0x000880
[ 4.065054] pci 0000:00:16.6: reg 10: [mem 0xfdf04000-0xfdf07fff 64bit]
[ 4.065190] pci 0000:00:16.7: [8086:342c] type 0 class 0x000880
[ 4.065215] pci 0000:00:16.7: reg 10: [mem 0xfdf00000-0xfdf03fff 64bit]
[ 4.065368] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 4.065449] pci 0000:00:1a.0: reg 20: [io 0x20e0-0x20ff]
[ 4.065541] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 4.065621] pci 0000:00:1a.1: reg 20: [io 0x20c0-0x20df]
[ 4.065708] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 4.065788] pci 0000:00:1a.2: reg 20: [io 0x20a0-0x20bf]
[ 4.065891] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 4.065924] pci 0000:00:1a.7: reg 10: [mem 0xb1a02000-0xb1a023ff]
[ 4.066048] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 4.066056] pci 0000:00:1a.7: PME# disabled
[ 4.066097] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 4.066204] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 4.066212] pci 0000:00:1c.0: PME# disabled
[ 4.066265] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 4.066372] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 4.066379] pci 0000:00:1c.4: PME# disabled
[ 4.066424] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 4.066530] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 4.066537] pci 0000:00:1c.5: PME# disabled
[ 4.066586] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 4.066667] pci 0000:00:1d.0: reg 20: [io 0x2080-0x209f]
[ 4.066754] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 4.066834] pci 0000:00:1d.1: reg 20: [io 0x2060-0x207f]
[ 4.066921] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 4.067001] pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f]
[ 4.067105] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 4.067138] pci 0000:00:1d.7: reg 10: [mem 0xb1a01000-0xb1a013ff]
[ 4.067262] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 4.067270] pci 0000:00:1d.7: PME# disabled
[ 4.067306] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 4.067420] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 4.067558] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 4.075998] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 4.084446] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f)
[ 4.092961] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 4.092994] pci 0000:00:1f.2: reg 10: [io 0x2108-0x210f]
[ 4.093009] pci 0000:00:1f.2: reg 14: [io 0x2114-0x2117]
[ 4.093024] pci 0000:00:1f.2: reg 18: [io 0x2100-0x2107]
[ 4.093039] pci 0000:00:1f.2: reg 1c: [io 0x2110-0x2113]
[ 4.093054] pci 0000:00:1f.2: reg 20: [io 0x2020-0x203f]
[ 4.093069] pci 0000:00:1f.2: reg 24: [mem 0xb1a00000-0xb1a007ff]
[ 4.093130] pci 0000:00:1f.2: PME# supported from D3hot
[ 4.093137] pci 0000:00:1f.2: PME# disabled
[ 4.093169] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 4.093198] pci 0000:00:1f.3: reg 10: [mem 0xfdf20000-0xfdf200ff 64bit]
[ 4.093238] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
[ 4.093412] pci 0000:01:00.0: [8086:10a7] type 0 class 0x000200
[ 4.093435] pci 0000:01:00.0: reg 10: [mem 0xb1920000-0xb193ffff]
[ 4.093470] pci 0000:01:00.0: reg 18: [io 0x1020-0x103f]
[ 4.093487] pci 0000:01:00.0: reg 1c: [mem 0xb1944000-0xb1947fff]
[ 4.093582] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 4.093590] pci 0000:01:00.0: PME# disabled
[ 4.093651] pci 0000:01:00.1: [8086:10a7] type 0 class 0x000200
[ 4.093673] pci 0000:01:00.1: reg 10: [mem 0xb1900000-0xb191ffff]
[ 4.093702] pci 0000:01:00.1: reg 18: [io 0x1000-0x101f]
[ 4.093718] pci 0000:01:00.1: reg 1c: [mem 0xb1940000-0xb1943fff]
[ 4.093813] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 4.093821] pci 0000:01:00.1: PME# disabled
[ 4.093861] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 4.099695] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 4.099701] pci 0000:00:01.0: bridge window [mem 0xb1900000-0xb19fffff]
[ 4.099787] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 4.105705] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 4.111628] pci 0000:00:04.0: PCI bridge to [bus 04-04]
[ 4.117549] pci 0000:00:05.0: PCI bridge to [bus 05-05]
[ 4.123469] pci 0000:00:06.0: PCI bridge to [bus 06-06]
[ 4.129387] pci 0000:00:07.0: PCI bridge to [bus 07-07]
[ 4.135317] pci 0000:00:08.0: PCI bridge to [bus 08-08]
[ 4.141242] pci 0000:00:09.0: PCI bridge to [bus 09-09]
[ 4.147161] pci 0000:00:0a.0: PCI bridge to [bus 0a-0a]
[ 4.153082] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 4.159045] pci 0000:0c:00.0: [102b:0522] type 0 class 0x000300
[ 4.159083] pci 0000:0c:00.0: reg 10: [mem 0xb0000000-0xb0ffffff pref]
[ 4.159111] pci 0000:0c:00.0: reg 14: [mem 0xb1800000-0xb1803fff]
[ 4.159139] pci 0000:0c:00.0: reg 18: [mem 0xb1000000-0xb17fffff]
[ 4.159243] pci 0000:0c:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 4.159353] pci 0000:00:1c.4: PCI bridge to [bus 0c-0c]
[ 4.165192] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff]
[ 4.165202] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 4.165283] pci 0000:00:1c.5: PCI bridge to [bus 0d-0d]
[ 4.171260] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
[ 4.179138] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 4.179141] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffffff] (subtractive decode)
[ 4.179240] pci_bus 0000:00: on NUMA node 0
[ 4.179247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 4.203034] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP1._PRT]
[ 4.203289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP3._PRT]
[ 4.203477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP5._PRT]
[ 4.203664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP7._PRT]
[ 4.203852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MRP9._PRT]
[ 4.204498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 4.204743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 4.205392] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19)
[ 4.350352] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus fe])
[ 4.357078] pci 0000:fe:00.0: [8086:2c70] type 0 class 0x000600
[ 4.357149] pci 0000:fe:00.1: [8086:2d81] type 0 class 0x000600
[ 4.357227] pci 0000:fe:02.0: [8086:2d90] type 0 class 0x000600
[ 4.357292] pci 0000:fe:02.1: [8086:2d91] type 0 class 0x000600
[ 4.357357] pci 0000:fe:02.2: [8086:2d92] type 0 class 0x000600
[ 4.357422] pci 0000:fe:02.3: [8086:2d93] type 0 class 0x000600
[ 4.357486] pci 0000:fe:02.4: [8086:2d94] type 0 class 0x000600
[ 4.357551] pci 0000:fe:02.5: [8086:2d95] type 0 class 0x000600
[ 4.357622] pci 0000:fe:03.0: [8086:2d98] type 0 class 0x000600
[ 4.357687] pci 0000:fe:03.1: [8086:2d99] type 0 class 0x000600
[ 4.357751] pci 0000:fe:03.2: [8086:2d9a] type 0 class 0x000600
[ 4.357817] pci 0000:fe:03.4: [8086:2d9c] type 0 class 0x000600
[ 4.357888] pci 0000:fe:04.0: [8086:2da0] type 0 class 0x000600
[ 4.357952] pci 0000:fe:04.1: [8086:2da1] type 0 class 0x000600
[ 4.358016] pci 0000:fe:04.2: [8086:2da2] type 0 class 0x000600
[ 4.358084] pci 0000:fe:04.3: [8086:2da3] type 0 class 0x000600
[ 4.358157] pci 0000:fe:05.0: [8086:2da8] type 0 class 0x000600
[ 4.358221] pci 0000:fe:05.1: [8086:2da9] type 0 class 0x000600
[ 4.358286] pci 0000:fe:05.2: [8086:2daa] type 0 class 0x000600
[ 4.358350] pci 0000:fe:05.3: [8086:2dab] type 0 class 0x000600
[ 4.358423] pci 0000:fe:06.0: [8086:2db0] type 0 class 0x000600
[ 4.358487] pci 0000:fe:06.1: [8086:2db1] type 0 class 0x000600
[ 4.358552] pci 0000:fe:06.2: [8086:2db2] type 0 class 0x000600
[ 4.358616] pci 0000:fe:06.3: [8086:2db3] type 0 class 0x000600
[ 4.358729] pci_bus 0000:fe: on NUMA node 0
[ 4.358735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 4.359278] pci0000:fe: Unable to request _OSC control (_OSC support mask: 0x19)
[ 4.369484] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus ff])
[ 4.376188] pci 0000:ff:00.0: [8086:2c70] type 0 class 0x000600
[ 4.376252] pci 0000:ff:00.1: [8086:2d81] type 0 class 0x000600
[ 4.376331] pci 0000:ff:02.0: [8086:2d90] type 0 class 0x000600
[ 4.376393] pci 0000:ff:02.1: [8086:2d91] type 0 class 0x000600
[ 4.376455] pci 0000:ff:02.2: [8086:2d92] type 0 class 0x000600
[ 4.376518] pci 0000:ff:02.3: [8086:2d93] type 0 class 0x000600
[ 4.376580] pci 0000:ff:02.4: [8086:2d94] type 0 class 0x000600
[ 4.376642] pci 0000:ff:02.5: [8086:2d95] type 0 class 0x000600
[ 4.376708] pci 0000:ff:03.0: [8086:2d98] type 0 class 0x000600
[ 4.376770] pci 0000:ff:03.1: [8086:2d99] type 0 class 0x000600
[ 4.376832] pci 0000:ff:03.2: [8086:2d9a] type 0 class 0x000600
[ 4.376906] pci 0000:ff:03.4: [8086:2d9c] type 0 class 0x000600
[ 4.376974] pci 0000:ff:04.0: [8086:2da0] type 0 class 0x000600
[ 4.377062] pci 0000:ff:04.1: [8086:2da1] type 0 class 0x000600
[ 4.377138] pci 0000:ff:04.2: [8086:2da2] type 0 class 0x000600
[ 4.377203] pci 0000:ff:04.3: [8086:2da3] type 0 class 0x000600
[ 4.377273] pci 0000:ff:05.0: [8086:2da8] type 0 class 0x000600
[ 4.377335] pci 0000:ff:05.1: [8086:2da9] type 0 class 0x000600
[ 4.377397] pci 0000:ff:05.2: [8086:2daa] type 0 class 0x000600
[ 4.377459] pci 0000:ff:05.3: [8086:2dab] type 0 class 0x000600
[ 4.377529] pci 0000:ff:06.0: [8086:2db0] type 0 class 0x000600
[ 4.377591] pci 0000:ff:06.1: [8086:2db1] type 0 class 0x000600
[ 4.377653] pci 0000:ff:06.2: [8086:2db2] type 0 class 0x000600
[ 4.377715] pci 0000:ff:06.3: [8086:2db3] type 0 class 0x000600
[ 4.377824] pci_bus 0000:ff: on NUMA node 0
[ 4.377830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
[ 4.378377] pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x19)
[ 4.388869] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 4.397276] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 4.405681] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 4.414082] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 4.422482] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 4.432165] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 4.440561] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 4.450240] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 4.459223] vgaarb: device added: PCI:0000:0c:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 4.468390] vgaarb: loaded
[ 4.471412] vgaarb: bridge control possible 0000:0c:00.0
[ 4.477850] SCSI subsystem initialized
[ 4.482197] libata version 3.00 loaded.
[ 4.482319] usbcore: registered new interface driver usbfs
[ 4.488499] usbcore: registered new interface driver hub
[ 4.494535] usbcore: registered new device driver usb
[ 4.500440] PCI: Using ACPI for IRQ routing
[ 4.514685] PCI: pci_cache_line_size set to 64 bytes
[ 4.515728] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 4.515740] reserve RAM buffer: 000000007f4cf000 - 000000007fffffff
[ 4.516703] Switching to clocksource hpet
[ 4.574887] pnp: PnP ACPI init
[ 4.578341] ACPI: bus type pnp registered
[ 4.583935] pnp 00:00: [bus 00-fd]
[ 4.583939] pnp 00:00: [io 0x0cf8-0x0cff]
[ 4.583945] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 4.583947] pnp 00:00: [io 0x0d00-0xffff window]
[ 4.583950] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 4.583953] pnp 00:00: [mem 0x000c4000-0x000cbfff window]
[ 4.583955] pnp 00:00: [mem 0xfed40000-0xfedfffff window]
[ 4.583958] pnp 00:00: [mem 0xb0000000-0xfdffffff window]
[ 4.583960] pnp 00:00: [mem 0x00000000 window]
[ 4.584203] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 4.584233] pnp 00:01: [mem 0xfec00000-0xfecfffff]
[ 4.584327] pnp 00:01: Plug and Play ACPI device, IDs PNP0003 (active)
[ 4.585187] pnp 00:02: [io 0x0000-0x000f]
[ 4.585190] pnp 00:02: [io 0x0081-0x0083]
[ 4.585192] pnp 00:02: [io 0x0087]
[ 4.585195] pnp 00:02: [io 0x0089-0x008b]
[ 4.585197] pnp 00:02: [io 0x008f]
[ 4.585199] pnp 00:02: [io 0x00c0-0x00df]
[ 4.585202] pnp 00:02: [dma 4]
[ 4.585387] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 4.585414] pnp 00:03: [io 0x0070-0x0071]
[ 4.585417] pnp 00:03: [io 0x0074-0x0077]
[ 4.585434] pnp 00:03: [irq 8]
[ 4.585613] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 4.585650] pnp 00:04: [io 0x00f0]
[ 4.585662] pnp 00:04: [irq 13]
[ 4.585847] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 4.585882] pnp 00:05: [io 0x0061]
[ 4.586067] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 4.586196] pnp 00:06: [mem 0xfed00000-0xfed003ff]
[ 4.586391] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 4.586420] pnp 00:07: [io 0x0500-0x053f]
[ 4.586423] pnp 00:07: [io 0x0400-0x047f]
[ 4.586425] pnp 00:07: [io 0x0092]
[ 4.586427] pnp 00:07: [io 0x0010-0x001f]
[ 4.586429] pnp 00:07: [io 0x0072-0x0073]
[ 4.586432] pnp 00:07: [io 0x0080]
[ 4.586434] pnp 00:07: [io 0x0084-0x0086]
[ 4.586436] pnp 00:07: [io 0x0088]
[ 4.586441] pnp 00:07: [io 0x008c-0x008e]
[ 4.586444] pnp 00:07: [io 0x0090-0x009f]
[ 4.586446] pnp 00:07: [io 0x0800-0x081f]
[ 4.586448] pnp 00:07: [io 0x02f8-0x02ff]
[ 4.586450] pnp 00:07: [mem 0xfed1c000-0xfed8bffe]
[ 4.586453] pnp 00:07: [mem 0xff000000-0xffffffff]
[ 4.586455] pnp 00:07: [mem 0xfee00000-0xfeefffff]
[ 4.586457] pnp 00:07: [mem 0xfe900000-0xfe90001f]
[ 4.586459] pnp 00:07: [mem 0xfea00000-0xfea0001f]
[ 4.586462] pnp 00:07: [mem 0xfed1b000-0xfed1bfff]
[ 4.587034] system 00:07: [io 0x0500-0x053f] has been reserved
[ 4.593648] system 00:07: [io 0x0400-0x047f] has been reserved
[ 4.600256] system 00:07: [io 0x0800-0x081f] has been reserved
[ 4.606865] system 00:07: [io 0x02f8-0x02ff] has been reserved
[ 4.613480] system 00:07: [mem 0xfed1c000-0xfed8bffe] could not be reserved
[ 4.621252] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[ 4.629022] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
[ 4.636396] system 00:07: [mem 0xfe900000-0xfe90001f] has been reserved
[ 4.643780] system 00:07: [mem 0xfea00000-0xfea0001f] has been reserved
[ 4.651162] system 00:07: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 4.658547] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 4.658986] pnp 00:08: [io 0xffff-0x10004 disabled]
[ 4.658989] pnp 00:08: [io 0xffff]
[ 4.658992] pnp 00:08: [irq 0 disabled]
[ 4.658994] pnp 00:08: [dma 0 disabled]
[ 4.659240] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 4.659574] pnp 00:09: [io 0xffff-0x10006 disabled]
[ 4.659576] pnp 00:09: [irq 0 disabled]
[ 4.659826] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 4.660287] pnp 00:0a: [io 0xffff-0x10006 disabled]
[ 4.660289] pnp 00:0a: [irq 0 disabled]
[ 4.660550] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 4.660800] pnp 00:0b: [bus fe]
[ 4.661038] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 4.661066] pnp 00:0c: [bus ff]
[ 4.661285] pnp 00:0c: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 4.661367] pnp: PnP ACPI: found 13 devices
[ 4.666044] ACPI: ACPI bus type pnp unregistered
[ 4.684798] pci 0000:0c:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 4.694555] PCI: max bus depth: 1 pci_try_num: 2
[ 4.694723] pci 0000:00:09.0: BAR 14: assigned [mem 0xb1b00000-0xb1cfffff]
[ 4.702399] pci 0000:00:09.0: BAR 15: assigned [mem 0xb1d00000-0xb1efffff 64bit pref]
[ 4.711140] pci 0000:00:09.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 4.718040] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 4.723873] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 4.730670] pci 0000:00:01.0: bridge window [mem 0xb1900000-0xb19fffff]
[ 4.738255] pci 0000:00:02.0: PCI bridge to [bus 02-02]
[ 4.744101] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 4.749947] pci 0000:00:04.0: PCI bridge to [bus 04-04]
[ 4.755793] pci 0000:00:05.0: PCI bridge to [bus 05-05]
[ 4.761639] pci 0000:00:06.0: PCI bridge to [bus 06-06]
[ 4.767483] pci 0000:00:07.0: PCI bridge to [bus 07-07]
[ 4.773329] pci 0000:00:08.0: PCI bridge to [bus 08-08]
[ 4.779174] pci 0000:00:09.0: PCI bridge to [bus 09-09]
[ 4.785008] pci 0000:00:09.0: bridge window [io 0x3000-0x3fff]
[ 4.791813] pci 0000:00:09.0: bridge window [mem 0xb1b00000-0xb1cfffff]
[ 4.799389] pci 0000:00:09.0: bridge window [mem 0xb1d00000-0xb1efffff 64bit pref]
[ 4.808036] pci 0000:00:0a.0: PCI bridge to [bus 0a-0a]
[ 4.813886] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 4.819738] pci 0000:0c:00.0: BAR 6: assigned [mem 0xb1810000-0xb181ffff pref]
[ 4.827798] pci 0000:00:1c.4: PCI bridge to [bus 0c-0c]
[ 4.833636] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff]
[ 4.841214] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 4.849860] pci 0000:00:1c.5: PCI bridge to [bus 0d-0d]
[ 4.855708] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
[ 4.861584] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 4.869059] pci 0000:00:01.0: setting latency timer to 64
[ 4.869083] pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 4.876565] pci 0000:00:02.0: setting latency timer to 64
[ 4.876589] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 4.884071] pci 0000:00:03.0: setting latency timer to 64
[ 4.884098] pci 0000:00:04.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[ 4.891578] pci 0000:00:04.0: setting latency timer to 64
[ 4.891602] pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
[ 4.899084] pci 0000:00:05.0: setting latency timer to 64
[ 4.899112] pci 0000:00:06.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 4.906593] pci 0000:00:06.0: setting latency timer to 64
[ 4.906618] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 4.914100] pci 0000:00:07.0: setting latency timer to 64
[ 4.914125] pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 4.921607] pci 0000:00:08.0: setting latency timer to 64
[ 4.921631] pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 4.929113] pci 0000:00:09.0: setting latency timer to 64
[ 4.929137] pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33
[ 4.936620] pci 0000:00:0a.0: setting latency timer to 64
[ 4.936645] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.944131] pci 0000:00:1c.0: setting latency timer to 64
[ 4.944143] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.951624] pci 0000:00:1c.4: setting latency timer to 64
[ 4.951648] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.959131] pci 0000:00:1c.5: setting latency timer to 64
[ 4.959144] pci 0000:00:1e.0: setting latency timer to 64
[ 4.959150] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 4.959152] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
[ 4.959155] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 4.959157] pci_bus 0000:01: resource 1 [mem 0xb1900000-0xb19fffff]
[ 4.959160] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
[ 4.959162] pci_bus 0000:09: resource 1 [mem 0xb1b00000-0xb1cfffff]
[ 4.959165] pci_bus 0000:09: resource 2 [mem 0xb1d00000-0xb1efffff 64bit pref]
[ 4.959168] pci_bus 0000:0c: resource 1 [mem 0xb1000000-0xb18fffff]
[ 4.959171] pci_bus 0000:0c: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 4.959174] pci_bus 0000:0e: resource 4 [io 0x0000-0xffff]
[ 4.959176] pci_bus 0000:0e: resource 5 [mem 0x00000000-0xffffffffff]
[ 4.959178] pci_bus 0000:fe: resource 0 [io 0x0000-0xffff]
[ 4.959181] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff]
[ 4.959184] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 4.959186] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff]
[ 4.959595] NET: Registered protocol family 2
[ 4.964732] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.973690] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 4.983794] TCP bind hash table entries: 32768 (order: 9, 2621440 bytes)
[ 4.994904] TCP: Hash tables configured (established 262144 bind 32768)
[ 5.002312] TCP reno registered
[ 5.005840] UDP hash table entries: 1024 (order: 5, 196608 bytes)
[ 5.012922] UDP-Lite hash table entries: 1024 (order: 5, 196608 bytes)
[ 5.021142] NET: Registered protocol family 1
[ 5.026620] RPC: Registered named UNIX socket transport module.
[ 5.033235] RPC: Registered udp transport module.
[ 5.038488] RPC: Registered tcp transport module.
[ 5.043738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.051644] pci 0000:01:00.0: Disabling L0s
[ 5.056325] pci 0000:01:00.1: Disabling L0s
[ 5.060999] pci 0000:0c:00.0: Boot video device
[ 5.061235] PCI: CLS 64 bytes, default 64
[ 5.073225] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0x5
[ 5.079653] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0x5
[ 5.086074] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0x5
[ 5.092497] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0x5
[ 5.098931] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0x5
[ 5.105353] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0x5
[ 5.111764] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0x5
[ 5.118214] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0x5
[ 5.124635] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0x5
[ 5.131058] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0x5
[ 5.137480] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0x5
[ 5.143997] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0x5
[ 5.150508] microcode: CPU12 sig=0x206c2, pf=0x1, revision=0x5
[ 5.157041] microcode: CPU13 sig=0x206c2, pf=0x1, revision=0x5
[ 5.163561] microcode: CPU14 sig=0x206c2, pf=0x1, revision=0x5
[ 5.170081] microcode: CPU15 sig=0x206c2, pf=0x1, revision=0x5
[ 5.176597] microcode: CPU16 sig=0x206c2, pf=0x1, revision=0x5
[ 5.183115] microcode: CPU17 sig=0x206c2, pf=0x1, revision=0x5
[ 5.189622] microcode: CPU18 sig=0x206c2, pf=0x1, revision=0x5
[ 5.196141] microcode: CPU19 sig=0x206c2, pf=0x1, revision=0x5
[ 5.202658] microcode: CPU20 sig=0x206c2, pf=0x1, revision=0x5
[ 5.209175] microcode: CPU21 sig=0x206c2, pf=0x1, revision=0x5
[ 5.215691] microcode: CPU22 sig=0x206c2, pf=0x1, revision=0x5
[ 5.222209] microcode: CPU23 sig=0x206c2, pf=0x1, revision=0x5
[ 5.228839] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.239198] audit: initializing netlink socket (disabled)
[ 5.245283] type=2000 audit(1320693245.492:1): initialized
[ 5.259253] VFS: Disk quotas dquot_6.5.2
[ 5.263773] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.274222] Btrfs loaded
[ 5.277070] msgmni has been set to 3876
[ 5.282584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 5.290863] io scheduler noop registered
[ 5.295246] io scheduler deadline registered
[ 5.300181] io scheduler cfq registered (default)
[ 5.305437] start plist test
[ 5.309514] end plist test
[ 5.314451] pcieport 0000:00:1c.0: setting latency timer to 64
[ 5.314595] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
[ 5.314732] pcieport 0000:00:1c.4: setting latency timer to 64
[ 5.314814] pcieport 0000:00:1c.4: irq 65 for MSI/MSI-X
[ 5.314939] pcieport 0000:00:1c.5: setting latency timer to 64
[ 5.315017] pcieport 0000:00:1c.5: irq 66 for MSI/MSI-X
[ 5.315358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.321776] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 5.329163] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 5.337799] acpiphp: Slot [2] registered
[ 5.403343] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.431040] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.500115] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 5.547951] serial 00:0a: disabled
[ 5.557806] brd: module loaded
[ 5.561564] ahci 0000:00:1f.2: version 3.0
[ 5.561612] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.569285] ahci 0000:00:1f.2: irq 67 for MSI/MSI-X
[ 5.569479] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 5.578609] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems
[ 5.587465] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.629366] scsi0 : ahci
[ 5.632770] scsi1 : ahci
[ 5.635846] scsi2 : ahci
[ 5.638886] scsi3 : ahci
[ 5.641959] scsi4 : ahci
[ 5.645032] scsi5 : ahci
[ 5.648680] ata1: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00100 irq 67
[ 5.656939] ata2: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00180 irq 67
[ 5.665194] ata3: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00200 irq 67
[ 5.673445] ata4: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00280 irq 67
[ 5.681699] ata5: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00300 irq 67
[ 5.689952] ata6: SATA max UDMA/133 abar m2048@0xb1a00000 port 0xb1a00380 irq 67
[ 5.698719] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 5.705232] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 5.711996] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k
[ 5.719381] Copyright (c) 2007-2011 Intel Corporation.
[ 5.725205] igb 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 5.732696] igb 0000:01:00.0: setting latency timer to 64
[ 5.733058] igb 0000:01:00.0: irq 68 for MSI/MSI-X
[ 5.733074] igb 0000:01:00.0: irq 69 for MSI/MSI-X
[ 5.733090] igb 0000:01:00.0: irq 70 for MSI/MSI-X
[ 5.733110] igb 0000:01:00.0: irq 71 for MSI/MSI-X
[ 5.733126] igb 0000:01:00.0: irq 72 for MSI/MSI-X
[ 5.733142] igb 0000:01:00.0: irq 73 for MSI/MSI-X
[ 5.733158] igb 0000:01:00.0: irq 74 for MSI/MSI-X
[ 5.733174] igb 0000:01:00.0: irq 75 for MSI/MSI-X
[ 5.733190] igb 0000:01:00.0: irq 76 for MSI/MSI-X
[ 5.939644] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.947324] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:13:20:f7:89:b4
[ 5.955362] igb 0000:01:00.0: eth0: PBA No: 1010FF-0FF
[ 5.961097] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.969590] igb 0000:01:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
[ 5.977081] igb 0000:01:00.1: setting latency timer to 64
[ 5.977453] igb 0000:01:00.1: irq 77 for MSI/MSI-X
[ 5.977469] igb 0000:01:00.1: irq 78 for MSI/MSI-X
[ 5.977485] igb 0000:01:00.1: irq 79 for MSI/MSI-X
[ 5.977501] igb 0000:01:00.1: irq 80 for MSI/MSI-X
[ 5.977517] igb 0000:01:00.1: irq 81 for MSI/MSI-X
[ 5.977534] igb 0000:01:00.1: irq 82 for MSI/MSI-X
[ 5.977550] igb 0000:01:00.1: irq 83 for MSI/MSI-X
[ 5.977569] igb 0000:01:00.1: irq 84 for MSI/MSI-X
[ 5.977585] igb 0000:01:00.1: irq 85 for MSI/MSI-X
[ 6.014842] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.020914] ata3: SATA link down (SStatus 0 SControl 300)
[ 6.026978] ata4: SATA link down (SStatus 0 SControl 300)
[ 6.033044] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.039983] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.046050] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.052314] ata1.00: ATA-6: WDC WD800JD-75HKA1, 14.03G14, max UDMA/133
[ 6.058834] Refined TSC clocksource calibration: 2400.085 MHz.
[ 6.058903] Switching to clocksource tsc
[ 6.070525] ata1.00: 156250000 sectors, multi 0: LBA
[ 6.077179] ata1.00: configured for UDMA/133
[ 6.082888] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-75HK 14.0 PQ: 0 ANSI: 5
[ 6.093100] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 6.093263] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.107745] sd 0:0:0:0: [sda] Write Protect is off
[ 6.113096] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.113170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.150080] sda: sda1 sda2 sda3
[ 6.155336] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.179141] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 6.186818] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:13:20:f7:89:b5
[ 6.194859] igb 0000:01:00.1: eth1: PBA No: 1010FF-0FF
[ 6.200599] igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.209148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.216539] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.224523] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6.224528] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.230940] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 6.239259] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.248209] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 6.248262] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xb1a02000
[ 6.270446] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.277849] hub 1-0:1.0: USB hub found
[ 6.282112] hub 1-0:1.0: 6 ports detected
[ 6.287805] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.295792] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.295797] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.301655] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 6.309965] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.318896] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 6.318945] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb1a01000
[ 6.338327] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.345217] hub 2-0:1.0: USB hub found
[ 6.349428] hub 2-0:1.0: 6 ports detected
[ 6.354698] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.361943] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.369919] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.369924] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.375794] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.384118] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020e0
[ 6.391285] hub 3-0:1.0: USB hub found
[ 6.395500] hub 3-0:1.0: 2 ports detected
[ 6.400685] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 6.408659] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 6.408664] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.414523] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 6.422848] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0
[ 6.429778] hub 4-0:1.0: USB hub found
[ 6.433987] hub 4-0:1.0: 2 ports detected
[ 6.439151] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.447128] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 6.447133] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 6.453136] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 6.461458] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000020a0
[ 6.468344] hub 5-0:1.0: USB hub found
[ 6.472552] hub 5-0:1.0: 2 ports detected
[ 6.477711] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.485689] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.485694] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.491558] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 6.499899] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080
[ 6.506815] hub 6-0:1.0: USB hub found
[ 6.511028] hub 6-0:1.0: 2 ports detected
[ 6.516174] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.524215] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.524220] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.530078] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 6.538417] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
[ 6.545310] hub 7-0:1.0: USB hub found
[ 6.549517] hub 7-0:1.0: 2 ports detected
[ 6.554818] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.562899] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.562905] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.568837] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 6.577128] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
[ 6.584041] hub 8-0:1.0: USB hub found
[ 6.588249] hub 8-0:1.0: 2 ports detected
[ 6.593582] Initializing USB Mass Storage driver...
[ 6.599100] usbcore: registered new interface driver usb-storage
[ 6.605805] USB Mass Storage support registered.
[ 6.611118] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 6.619560] i8042: No controller found
[ 6.624075] mousedev: PS/2 mouse device common for all mice
[ 6.630560] rtc_cmos 00:03: RTC can wake from S4
[ 6.636131] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.642981] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.650603] md: linear personality registered for level -1
[ 6.656726] md: raid0 personality registered for level 0
[ 6.662658] md: raid1 personality registered for level 1
[ 6.668587] md: raid10 personality registered for level 10
[ 6.674711] md: multipath personality registered for level -4
[ 6.681122] md: faulty personality registered for level -5
[ 6.687830] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 6.697712] cpuidle: using governor ladder
[ 6.702302] cpuidle: using governor menu
[ 6.706824] usbcore: registered new interface driver usbhid
[ 6.713047] usbhid: USB HID core driver
[ 6.717654] TCP cubic registered
[ 6.721265] NET: Registered protocol family 17
next prev parent reply other threads:[~2011-11-08 5:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 20:01 [PATCH] clocksource: Avoid selecting mult values that might overflow when adjusted John Stultz
2011-11-03 3:10 ` Yong Zhang
2011-11-03 9:36 ` Américo Wang
2011-11-04 2:16 ` Yong Zhang
2011-11-03 12:05 ` Thomas Gleixner
2011-11-03 13:10 ` John Stultz
2011-11-03 13:26 ` Thomas Gleixner
2011-11-03 14:01 ` John Stultz
2011-11-03 14:09 ` John Stultz
2011-11-03 14:49 ` Thomas Gleixner
2011-11-03 14:52 ` Thomas Gleixner
2011-11-03 15:14 ` John Stultz
2011-11-03 21:10 ` Ingo Molnar
2011-11-04 13:11 ` John Stultz
2011-11-04 15:20 ` Ingo Molnar
2011-11-08 3:09 ` John Stultz
2011-11-08 3:11 ` Yong Zhang
2011-11-08 5:02 ` Yong Zhang [this message]
2011-11-08 21:39 ` John Stultz
2011-11-09 1:46 ` Yong Zhang
2011-11-10 15:05 ` Ingo Molnar
-- strict thread matches above, loose matches on Subject: below --
2011-11-09 2:08 John Stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111108050259.GA13225@zhy \
--to=yong.zhang0@gmail.com \
--cc=ddaney.cavm@gmail.com \
--cc=john.stultz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.