From: plagnioj@jcrosoft.com (Jean-Christophe PLAGNIOL-VILLARD)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Support for Cadence GEM in the MACB driver
Date: Tue, 22 Nov 2011 11:00:32 +0100 [thread overview]
Message-ID: <20111122100032.GL21480@game.jcrosoft.org> (raw)
In-Reply-To: <20111121100020.GB7314@totoro>
On 10:00 Mon 21 Nov , Jamie Iles wrote:
> Hi Arnd,
>
> Please consider pulling the patches to add support for Cadence GEM to
> the MACB driver. These have been ready to go for a little while but got
> held up with the rename of Ethernet drivers in the last merge window.
> It would be great if we can get some exposure in -next for a little
> while before the next merge window.
>
> Thanks,
>
> Jamie
>
> The following changes since commit cfcfc9eca2bcbd26a8e206baeb005b055dbf8e37:
>
> Linux 3.2-rc2 (2011-11-15 15:02:59 -0200)
>
> are available in the git repository at:
> git://github.com/jamieiles/linux-2.6-ji.git macb-gem
Arnd please wait
please update his patch
"at91: provide macb clks with "pclk" and "hclk" name"
with the version I send to the ML
Best Regards,
J.
>
> Jamie Iles (9):
> at91: provide macb clks with "pclk" and "hclk" name
> macb: remove conditional clk handling
> macb: unify at91 and avr32 platform data
> macb: convert printk to netdev_ and friends
> macb: initial support for Cadence GEM
> macb: support higher rate GEM MDIO clock divisors
> macb: support statistics for GEM devices
> macb: support DMA bus widths > 32 bits
> macb: allow GEM to have configurable receive buffer size
>
> arch/arm/mach-at91/at91cap9.c | 8 +-
> arch/arm/mach-at91/at91cap9_devices.c | 6 +-
> arch/arm/mach-at91/at91rm9200_devices.c | 6 +-
> arch/arm/mach-at91/at91sam9260.c | 8 +-
> arch/arm/mach-at91/at91sam9260_devices.c | 6 +-
> arch/arm/mach-at91/at91sam9263.c | 8 +-
> arch/arm/mach-at91/at91sam9263_devices.c | 6 +-
> arch/arm/mach-at91/at91sam9g45.c | 8 +-
> arch/arm/mach-at91/at91sam9g45_devices.c | 6 +-
> arch/arm/mach-at91/board-1arm.c | 2 +-
> arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
> arch/arm/mach-at91/board-cam60.c | 2 +-
> arch/arm/mach-at91/board-cap9adk.c | 2 +-
> arch/arm/mach-at91/board-carmeva.c | 2 +-
> arch/arm/mach-at91/board-cpu9krea.c | 2 +-
> arch/arm/mach-at91/board-cpuat91.c | 2 +-
> arch/arm/mach-at91/board-csb337.c | 2 +-
> arch/arm/mach-at91/board-csb637.c | 2 +-
> arch/arm/mach-at91/board-eb9200.c | 2 +-
> arch/arm/mach-at91/board-ecbat91.c | 2 +-
> arch/arm/mach-at91/board-eco920.c | 2 +-
> arch/arm/mach-at91/board-foxg20.c | 2 +-
> arch/arm/mach-at91/board-gsia18s.c | 2 +-
> arch/arm/mach-at91/board-kafa.c | 2 +-
> arch/arm/mach-at91/board-kb9202.c | 2 +-
> arch/arm/mach-at91/board-neocore926.c | 2 +-
> arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
> arch/arm/mach-at91/board-picotux200.c | 2 +-
> arch/arm/mach-at91/board-qil-a9260.c | 2 +-
> arch/arm/mach-at91/board-rm9200dk.c | 2 +-
> arch/arm/mach-at91/board-rm9200ek.c | 2 +-
> arch/arm/mach-at91/board-rsi-ews.c | 2 +-
> arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
> arch/arm/mach-at91/board-sam9260ek.c | 2 +-
> arch/arm/mach-at91/board-sam9263ek.c | 2 +-
> arch/arm/mach-at91/board-sam9g20ek.c | 2 +-
> arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
> arch/arm/mach-at91/board-snapper9260.c | 2 +-
> arch/arm/mach-at91/board-stamp9g20.c | 2 +-
> arch/arm/mach-at91/board-usb-a926x.c | 2 +-
> arch/arm/mach-at91/board-yl-9200.c | 2 +-
> arch/arm/mach-at91/include/mach/board.h | 14 +-
> arch/avr32/boards/atngw100/setup.c | 2 +-
> arch/avr32/boards/atstk1000/atstk1002.c | 2 +-
> arch/avr32/boards/favr-32/setup.c | 2 +-
> arch/avr32/boards/hammerhead/setup.c | 2 +-
> arch/avr32/boards/merisc/setup.c | 2 +-
> arch/avr32/boards/mimc200/setup.c | 2 +-
> arch/avr32/mach-at32ap/at32ap700x.c | 8 +-
> arch/avr32/mach-at32ap/include/mach/board.h | 7 +-
> drivers/net/ethernet/Makefile | 2 +-
> drivers/net/ethernet/cadence/Kconfig | 16 +-
> drivers/net/ethernet/cadence/at91_ether.c | 3 +-
> drivers/net/ethernet/cadence/at91_ether.h | 4 +-
> drivers/net/ethernet/cadence/macb.c | 344 +++++++++++++++++----------
> drivers/net/ethernet/cadence/macb.h | 150 ++++++++++++-
> include/linux/platform_data/macb.h | 17 ++
> 57 files changed, 492 insertions(+), 211 deletions(-)
> create mode 100644 include/linux/platform_data/macb.h
WARNING: multiple messages have this Message-ID (diff)
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Jamie Iles <jamie@jamieiles.com>
Cc: netdev@vger.kernel.org, Nicolas Ferre <nicolas.ferre@atmel.com>,
linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>,
davem@davemloft.net
Subject: Re: [GIT PULL] Support for Cadence GEM in the MACB driver
Date: Tue, 22 Nov 2011 11:00:32 +0100 [thread overview]
Message-ID: <20111122100032.GL21480@game.jcrosoft.org> (raw)
In-Reply-To: <20111121100020.GB7314@totoro>
On 10:00 Mon 21 Nov , Jamie Iles wrote:
> Hi Arnd,
>
> Please consider pulling the patches to add support for Cadence GEM to
> the MACB driver. These have been ready to go for a little while but got
> held up with the rename of Ethernet drivers in the last merge window.
> It would be great if we can get some exposure in -next for a little
> while before the next merge window.
>
> Thanks,
>
> Jamie
>
> The following changes since commit cfcfc9eca2bcbd26a8e206baeb005b055dbf8e37:
>
> Linux 3.2-rc2 (2011-11-15 15:02:59 -0200)
>
> are available in the git repository at:
> git://github.com/jamieiles/linux-2.6-ji.git macb-gem
Arnd please wait
please update his patch
"at91: provide macb clks with "pclk" and "hclk" name"
with the version I send to the ML
Best Regards,
J.
>
> Jamie Iles (9):
> at91: provide macb clks with "pclk" and "hclk" name
> macb: remove conditional clk handling
> macb: unify at91 and avr32 platform data
> macb: convert printk to netdev_ and friends
> macb: initial support for Cadence GEM
> macb: support higher rate GEM MDIO clock divisors
> macb: support statistics for GEM devices
> macb: support DMA bus widths > 32 bits
> macb: allow GEM to have configurable receive buffer size
>
> arch/arm/mach-at91/at91cap9.c | 8 +-
> arch/arm/mach-at91/at91cap9_devices.c | 6 +-
> arch/arm/mach-at91/at91rm9200_devices.c | 6 +-
> arch/arm/mach-at91/at91sam9260.c | 8 +-
> arch/arm/mach-at91/at91sam9260_devices.c | 6 +-
> arch/arm/mach-at91/at91sam9263.c | 8 +-
> arch/arm/mach-at91/at91sam9263_devices.c | 6 +-
> arch/arm/mach-at91/at91sam9g45.c | 8 +-
> arch/arm/mach-at91/at91sam9g45_devices.c | 6 +-
> arch/arm/mach-at91/board-1arm.c | 2 +-
> arch/arm/mach-at91/board-afeb-9260v1.c | 2 +-
> arch/arm/mach-at91/board-cam60.c | 2 +-
> arch/arm/mach-at91/board-cap9adk.c | 2 +-
> arch/arm/mach-at91/board-carmeva.c | 2 +-
> arch/arm/mach-at91/board-cpu9krea.c | 2 +-
> arch/arm/mach-at91/board-cpuat91.c | 2 +-
> arch/arm/mach-at91/board-csb337.c | 2 +-
> arch/arm/mach-at91/board-csb637.c | 2 +-
> arch/arm/mach-at91/board-eb9200.c | 2 +-
> arch/arm/mach-at91/board-ecbat91.c | 2 +-
> arch/arm/mach-at91/board-eco920.c | 2 +-
> arch/arm/mach-at91/board-foxg20.c | 2 +-
> arch/arm/mach-at91/board-gsia18s.c | 2 +-
> arch/arm/mach-at91/board-kafa.c | 2 +-
> arch/arm/mach-at91/board-kb9202.c | 2 +-
> arch/arm/mach-at91/board-neocore926.c | 2 +-
> arch/arm/mach-at91/board-pcontrol-g20.c | 2 +-
> arch/arm/mach-at91/board-picotux200.c | 2 +-
> arch/arm/mach-at91/board-qil-a9260.c | 2 +-
> arch/arm/mach-at91/board-rm9200dk.c | 2 +-
> arch/arm/mach-at91/board-rm9200ek.c | 2 +-
> arch/arm/mach-at91/board-rsi-ews.c | 2 +-
> arch/arm/mach-at91/board-sam9-l9260.c | 2 +-
> arch/arm/mach-at91/board-sam9260ek.c | 2 +-
> arch/arm/mach-at91/board-sam9263ek.c | 2 +-
> arch/arm/mach-at91/board-sam9g20ek.c | 2 +-
> arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +-
> arch/arm/mach-at91/board-snapper9260.c | 2 +-
> arch/arm/mach-at91/board-stamp9g20.c | 2 +-
> arch/arm/mach-at91/board-usb-a926x.c | 2 +-
> arch/arm/mach-at91/board-yl-9200.c | 2 +-
> arch/arm/mach-at91/include/mach/board.h | 14 +-
> arch/avr32/boards/atngw100/setup.c | 2 +-
> arch/avr32/boards/atstk1000/atstk1002.c | 2 +-
> arch/avr32/boards/favr-32/setup.c | 2 +-
> arch/avr32/boards/hammerhead/setup.c | 2 +-
> arch/avr32/boards/merisc/setup.c | 2 +-
> arch/avr32/boards/mimc200/setup.c | 2 +-
> arch/avr32/mach-at32ap/at32ap700x.c | 8 +-
> arch/avr32/mach-at32ap/include/mach/board.h | 7 +-
> drivers/net/ethernet/Makefile | 2 +-
> drivers/net/ethernet/cadence/Kconfig | 16 +-
> drivers/net/ethernet/cadence/at91_ether.c | 3 +-
> drivers/net/ethernet/cadence/at91_ether.h | 4 +-
> drivers/net/ethernet/cadence/macb.c | 344 +++++++++++++++++----------
> drivers/net/ethernet/cadence/macb.h | 150 ++++++++++++-
> include/linux/platform_data/macb.h | 17 ++
> 57 files changed, 492 insertions(+), 211 deletions(-)
> create mode 100644 include/linux/platform_data/macb.h
next prev parent reply other threads:[~2011-11-22 10:00 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-21 10:00 [GIT PULL] Support for Cadence GEM in the MACB driver Jamie Iles
2011-11-21 10:00 ` Jamie Iles
2011-11-22 10:00 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2011-11-22 10:00 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-22 10:20 ` Jamie Iles
2011-11-22 10:20 ` Jamie Iles
2011-11-22 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-22 14:59 ` Jean-Christophe PLAGNIOL-VILLARD
2011-11-22 15:25 ` [GIT PULL] Support for Cadence GEM in the MACB driver (Take 2) Jamie Iles
2011-11-23 21:14 ` [GIT PULL] Support for Cadence GEM in the MACB driver Arnd Bergmann
2011-11-23 21:14 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111122100032.GL21480@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.