From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Axel Lin <axel.lin@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Corentin Labbe <corentin.labbe@geomatys.fr>,
Dirk Eibach <eibach@gdsys.de>,
"Mark M. Hoffman" <mhoffman@lightlink.com>,
Steve Glendinning <steve.glendinning@smsc.com>,
Riku Voipio <riku.voipio@iki.fi>,
Guillaume Ligneul <guillaume.ligneul@gmail.com>,
David George <david.george@ska.ac.za>,
"Hans J. Koch" <hjk@hansjkoch.de>,
Marc Hulsman <m.hulsman@tudelft.nl>,
Rudolf Marek <r.marek@assembler.cz>,
Jean Delvare <khali@linux-fr.org>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>
Subject: Re: [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use
Date: Fri, 25 Nov 2011 16:57:08 +0000 [thread overview]
Message-ID: <20111125165708.GA11317@ericsson.com> (raw)
In-Reply-To: <1322204787.11718.1.camel@phoenix>
On Fri, Nov 25, 2011 at 02:06:27AM -0500, Axel Lin wrote:
> This patch converts the drivers in drivers/hwmon/* to use the
> module_i2c_driver() macro which makes the code smaller and a bit
> simpler.
>
> Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
> Cc: Dirk Eibach <eibach@gdsys.de>
> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
> Cc: Steve Glendinning <steve.glendinning@smsc.com>
> Cc: Riku Voipio <riku.voipio@iki.fi>
> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
> Cc: David George <david.george@ska.ac.za>
> Cc: "Hans J. Koch" <hjk@hansjkoch.de>
> Cc: Marc Hulsman <m.hulsman@tudelft.nl>
> Cc: Rudolf Marek <r.marek@assembler.cz>
> Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
What is the plan for those patches ? Are they expected to all go through the same tree,
or through individual trees after the necessary defines are introduced into mainline ?
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: Axel Lin <axel.lin@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Corentin Labbe <corentin.labbe@geomatys.fr>,
Dirk Eibach <eibach@gdsys.de>,
"Mark M. Hoffman" <mhoffman@lightlink.com>,
Steve Glendinning <steve.glendinning@smsc.com>,
Riku Voipio <riku.voipio@iki.fi>,
Guillaume Ligneul <guillaume.ligneul@gmail.com>,
David George <david.george@ska.ac.za>,
"Hans J. Koch" <hjk@hansjkoch.de>,
Marc Hulsman <m.hulsman@tudelft.nl>,
Rudolf Marek <r.marek@assembler.cz>,
Jean Delvare <khali@linux-fr.org>,
"lm-sensors@lm-sensors.org" <lm-sensors@lm-sensors.org>
Subject: Re: [PATCH] hwmon: convert drivers/hwmon/* to use module_i2c_driver()
Date: Fri, 25 Nov 2011 08:57:08 -0800 [thread overview]
Message-ID: <20111125165708.GA11317@ericsson.com> (raw)
In-Reply-To: <1322204787.11718.1.camel@phoenix>
On Fri, Nov 25, 2011 at 02:06:27AM -0500, Axel Lin wrote:
> This patch converts the drivers in drivers/hwmon/* to use the
> module_i2c_driver() macro which makes the code smaller and a bit
> simpler.
>
> Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
> Cc: Dirk Eibach <eibach@gdsys.de>
> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
> Cc: Steve Glendinning <steve.glendinning@smsc.com>
> Cc: Riku Voipio <riku.voipio@iki.fi>
> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
> Cc: David George <david.george@ska.ac.za>
> Cc: "Hans J. Koch" <hjk@hansjkoch.de>
> Cc: Marc Hulsman <m.hulsman@tudelft.nl>
> Cc: Rudolf Marek <r.marek@assembler.cz>
> Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
What is the plan for those patches ? Are they expected to all go through the same tree,
or through individual trees after the necessary defines are introduced into mainline ?
Guenter
next prev parent reply other threads:[~2011-11-25 16:57 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-25 7:06 [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Axel Lin
2011-11-25 7:06 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_i2c_driver() Axel Lin
2011-11-25 7:12 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Axel Lin
2011-11-25 7:12 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_spi_driver() Axel Lin
2011-11-25 9:01 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Zhang, Sonic
2011-11-25 9:01 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_spi_driver() Zhang, Sonic
2011-11-27 17:48 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Guenter Roeck
2011-11-27 17:48 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_spi_driver() Guenter Roeck
2011-11-25 7:31 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Axel Lin
2011-11-25 7:31 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_platform_driver() Axel Lin
2011-11-25 11:03 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Mark Brown
2011-11-25 11:03 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_platform_driver() Mark Brown
2011-11-27 1:37 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Guenter Roeck
2011-11-27 1:37 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_platform_driver() Guenter Roeck
2011-11-25 16:57 ` Guenter Roeck [this message]
2011-11-25 16:57 ` [PATCH] hwmon: convert drivers/hwmon/* to use module_i2c_driver() Guenter Roeck
2011-11-27 17:32 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Guenter Roeck
2011-11-27 17:32 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use module_i2c_driver() Guenter Roeck
2011-11-27 23:58 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use Axel Lin
2011-11-27 23:58 ` [lm-sensors] [PATCH] hwmon: convert drivers/hwmon/* to use module_i2c_driver() Axel Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111125165708.GA11317@ericsson.com \
--to=guenter.roeck@ericsson.com \
--cc=axel.lin@gmail.com \
--cc=corentin.labbe@geomatys.fr \
--cc=david.george@ska.ac.za \
--cc=eibach@gdsys.de \
--cc=guillaume.ligneul@gmail.com \
--cc=hjk@hansjkoch.de \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=m.hulsman@tudelft.nl \
--cc=mhoffman@lightlink.com \
--cc=r.marek@assembler.cz \
--cc=riku.voipio@iki.fi \
--cc=steve.glendinning@smsc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.