From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-staging
Date: Sun, 27 Nov 2011 20:28:57 +0100 [thread overview]
Message-ID: <20111127202857.316d1dcb@wker> (raw)
Hello Wolfgang,
The following changes since commit 99258c34103efad3395c679256a221731d010c4b:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-11-27 16:03:21 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-staging agust at denx.de
Alexander Holler (1):
OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that.
Christian Riesch (3):
davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board
davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board
hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines
Igor Grinberg (1):
dataflash: fix parameters order in write_dataflash()
Stelian Pop (1):
Fix Stelian's email address
Yan-Pai Chen (1):
arm: a320evb: define mach-type in board config file
CREDITS | 2 +-
MAINTAINERS | 2 +-
arch/arm/cpu/arm920t/at91/at91rm9200_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 2 +-
.../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/led.c | 2 +-
arch/arm/cpu/arm926ejs/at91/reset.c | 2 +-
arch/arm/cpu/arm926ejs/at91/timer.c | 2 +-
arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 2 +-
arch/arm/cpu/armv7/omap3/board.c | 12 +-----------
arch/arm/include/asm/arch-at91/at91_common.h | 2 +-
arch/arm/include/asm/arch-at91/at91cap9.h | 2 +-
arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 2 +-
arch/arm/include/asm/arch-at91/clk.h | 2 +-
arch/arm/include/asm/arch-at91/hardware.h | 2 +-
arch/arm/include/asm/arch-davinci/davinci_misc.h | 3 ---
arch/arm/include/asm/dma-mapping.h | 2 +-
board/afeb9260/Makefile | 2 +-
board/afeb9260/afeb9260.c | 2 +-
board/atmel/at91sam9260ek/Makefile | 2 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 2 +-
board/atmel/at91sam9260ek/led.c | 2 +-
board/atmel/at91sam9261ek/Makefile | 2 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 2 +-
board/atmel/at91sam9261ek/led.c | 2 +-
board/atmel/at91sam9263ek/Makefile | 2 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +-
board/atmel/at91sam9263ek/led.c | 2 +-
board/atmel/at91sam9m10g45ek/Makefile | 2 +-
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +-
board/atmel/at91sam9m10g45ek/led.c | 2 +-
board/atmel/at91sam9rlek/Makefile | 2 +-
board/atmel/at91sam9rlek/at91sam9rlek.c | 2 +-
board/atmel/at91sam9rlek/led.c | 2 +-
board/calao/sbc35_a9g20/Makefile | 2 +-
board/calao/sbc35_a9g20/sbc35_a9g20.c | 2 +-
board/calao/tny_a9260/Makefile | 2 +-
board/calao/tny_a9260/tny_a9260.c | 2 +-
board/davinci/da8xxevm/hawkboard.c | 4 ++--
board/davinci/da8xxevm/hawkboard_nand_spl.c | 4 ++--
board/davinci/schmoogie/schmoogie.c | 3 ---
board/davinci/sonata/sonata.c | 3 ---
board/emk/top9000/top9000.c | 2 +-
board/esd/meesc/Makefile | 2 +-
board/esd/meesc/meesc.c | 2 +-
board/esd/otc570/Makefile | 2 +-
board/esd/otc570/otc570.c | 2 +-
board/eukrea/cpu9260/Makefile | 2 +-
board/eukrea/cpu9260/cpu9260.c | 2 +-
board/faraday/a320evb/a320evb.c | 1 -
board/ronetix/pm9261/Makefile | 2 +-
board/ronetix/pm9261/led.c | 2 +-
board/ronetix/pm9261/pm9261.c | 2 +-
board/ronetix/pm9263/Makefile | 2 +-
board/ronetix/pm9263/led.c | 2 +-
board/ronetix/pm9263/pm9263.c | 2 +-
board/ronetix/pm9g45/Makefile | 2 +-
board/ronetix/pm9g45/pm9g45.c | 2 +-
board/syteco/jadecpu/Makefile | 2 +-
doc/README.scrapyard | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
include/configs/a320evb.h | 6 ++++++
include/configs/at91sam9260ek.h | 2 +-
include/configs/at91sam9261ek.h | 2 +-
include/configs/at91sam9263ek.h | 2 +-
include/configs/at91sam9m10g45ek.h | 2 +-
include/configs/at91sam9rlek.h | 2 +-
include/configs/cpu9260.h | 2 +-
include/configs/davinci_schmoogie.h | 3 +++
include/configs/davinci_sonata.h | 2 ++
include/configs/meesc.h | 2 +-
include/configs/otc570.h | 2 +-
include/configs/pm9261.h | 2 +-
include/configs/pm9263.h | 2 +-
include/configs/pm9g45.h | 2 +-
include/configs/tny_a9260.h | 2 +-
include/dataflash.h | 3 ++-
81 files changed, 88 insertions(+), 96 deletions(-)
Please pull. Thanks!
Anatolij
next reply other threads:[~2011-11-27 19:28 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-27 19:28 Anatolij Gustschin [this message]
2011-11-27 23:00 ` [U-Boot] Pull request: u-boot-staging (updated) Anatolij Gustschin
2011-11-28 18:57 ` Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2011-12-05 22:30 [U-Boot] Pull request: u-boot-staging Anatolij Gustschin
2011-12-05 22:34 ` Wolfgang Denk
2011-12-09 16:36 Anatolij Gustschin
2011-12-10 21:46 ` Wolfgang Denk
2011-12-12 13:41 Anatolij Gustschin
2011-12-12 13:51 ` Wolfgang Denk
2011-12-20 21:35 Anatolij Gustschin
2011-12-20 22:15 ` Wolfgang Denk
2012-03-30 17:24 Anatolij Gustschin
2012-03-30 19:06 ` Wolfgang Denk
2012-04-16 16:42 Anatolij Gustschin
2012-04-16 21:00 ` Wolfgang Denk
2012-04-30 15:03 Anatolij Gustschin
2012-04-30 16:21 ` Wolfgang Denk
2012-09-01 12:44 Anatolij Gustschin
2012-09-01 22:46 ` Wolfgang Denk
2012-09-21 23:10 Anatolij Gustschin
2012-09-22 0:21 ` Tom Rini
2012-09-22 0:22 ` Tom Rini
2012-10-05 23:06 Anatolij Gustschin
2012-10-08 16:09 ` Tom Rini
2012-11-08 12:39 Anatolij Gustschin
2012-11-08 15:07 ` Tom Rini
2012-11-14 13:52 Anatolij Gustschin
2012-11-19 19:59 ` Tom Rini
2013-01-14 22:28 Anatolij Gustschin
2013-01-14 22:40 ` Tom Rini
2013-03-29 13:26 Anatolij Gustschin
2013-04-01 16:30 ` Tom Rini
2014-08-21 17:17 Anatolij Gustschin
2014-08-25 12:35 ` Tom Rini
2014-10-31 0:02 Anatolij Gustschin
2014-11-04 20:00 ` Tom Rini
2016-02-06 18:18 Anatolij Gustschin
2016-02-08 20:45 ` Tom Rini
2018-08-07 6:56 Anatolij Gustschin
2018-08-07 15:32 ` Tom Rini
2018-08-11 17:15 Anatolij Gustschin
2018-08-13 0:21 ` Tom Rini
2018-10-20 19:35 Anatolij Gustschin
2018-10-20 19:43 ` Tom Rini
2018-10-20 20:20 ` Anatolij Gustschin
2018-10-22 18:26 ` Jagan Teki
2018-10-22 18:39 ` Anatolij Gustschin
2019-06-10 11:26 Anatolij Gustschin
2019-06-10 13:42 ` Tom Rini
2019-06-10 13:50 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111127202857.316d1dcb@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.