From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-staging (updated)
Date: Mon, 28 Nov 2011 00:00:31 +0100 [thread overview]
Message-ID: <20111128000031.10432bf4@wker> (raw)
In-Reply-To: <20111127202857.316d1dcb@wker>
Hello Wolfgang,
Added a patch from Stefano.
The following changes since commit 99258c34103efad3395c679256a221731d010c4b:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2011-11-27 16:03:21 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-staging agust at denx.de
Alexander Holler (1):
OMAP3: Use sdelay from arch/arm/cpu/armv7/syslib.c instead of cloning that.
Christian Riesch (3):
davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board
davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board
hawkboard: Replace HAWKBOARD_KICK{0, 1}_UNLOCK defines
Igor Grinberg (1):
dataflash: fix parameters order in write_dataflash()
Stefano Babic (1):
MAKEALL: drop obsolete mx31pdk_nand target
Stelian Pop (1):
Fix Stelian's email address
Yan-Pai Chen (1):
arm: a320evb: define mach-type in board config file
CREDITS | 2 +-
MAINTAINERS | 2 +-
MAKEALL | 1 -
arch/arm/cpu/arm920t/at91/at91rm9200_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 2 +-
.../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 2 +-
arch/arm/cpu/arm926ejs/at91/led.c | 2 +-
arch/arm/cpu/arm926ejs/at91/reset.c | 2 +-
arch/arm/cpu/arm926ejs/at91/timer.c | 2 +-
arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 2 +-
arch/arm/cpu/armv7/omap3/board.c | 12 +-----------
arch/arm/include/asm/arch-at91/at91_common.h | 2 +-
arch/arm/include/asm/arch-at91/at91cap9.h | 2 +-
arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 2 +-
arch/arm/include/asm/arch-at91/clk.h | 2 +-
arch/arm/include/asm/arch-at91/hardware.h | 2 +-
arch/arm/include/asm/arch-davinci/davinci_misc.h | 3 ---
arch/arm/include/asm/dma-mapping.h | 2 +-
board/afeb9260/Makefile | 2 +-
board/afeb9260/afeb9260.c | 2 +-
board/atmel/at91sam9260ek/Makefile | 2 +-
board/atmel/at91sam9260ek/at91sam9260ek.c | 2 +-
board/atmel/at91sam9260ek/led.c | 2 +-
board/atmel/at91sam9261ek/Makefile | 2 +-
board/atmel/at91sam9261ek/at91sam9261ek.c | 2 +-
board/atmel/at91sam9261ek/led.c | 2 +-
board/atmel/at91sam9263ek/Makefile | 2 +-
board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +-
board/atmel/at91sam9263ek/led.c | 2 +-
board/atmel/at91sam9m10g45ek/Makefile | 2 +-
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +-
board/atmel/at91sam9m10g45ek/led.c | 2 +-
board/atmel/at91sam9rlek/Makefile | 2 +-
board/atmel/at91sam9rlek/at91sam9rlek.c | 2 +-
board/atmel/at91sam9rlek/led.c | 2 +-
board/calao/sbc35_a9g20/Makefile | 2 +-
board/calao/sbc35_a9g20/sbc35_a9g20.c | 2 +-
board/calao/tny_a9260/Makefile | 2 +-
board/calao/tny_a9260/tny_a9260.c | 2 +-
board/davinci/da8xxevm/hawkboard.c | 4 ++--
board/davinci/da8xxevm/hawkboard_nand_spl.c | 4 ++--
board/davinci/schmoogie/schmoogie.c | 3 ---
board/davinci/sonata/sonata.c | 3 ---
board/emk/top9000/top9000.c | 2 +-
board/esd/meesc/Makefile | 2 +-
board/esd/meesc/meesc.c | 2 +-
board/esd/otc570/Makefile | 2 +-
board/esd/otc570/otc570.c | 2 +-
board/eukrea/cpu9260/Makefile | 2 +-
board/eukrea/cpu9260/cpu9260.c | 2 +-
board/faraday/a320evb/a320evb.c | 1 -
board/ronetix/pm9261/Makefile | 2 +-
board/ronetix/pm9261/led.c | 2 +-
board/ronetix/pm9261/pm9261.c | 2 +-
board/ronetix/pm9263/Makefile | 2 +-
board/ronetix/pm9263/led.c | 2 +-
board/ronetix/pm9263/pm9263.c | 2 +-
board/ronetix/pm9g45/Makefile | 2 +-
board/ronetix/pm9g45/pm9g45.c | 2 +-
board/syteco/jadecpu/Makefile | 2 +-
doc/README.scrapyard | 2 +-
drivers/mtd/nand/atmel_nand.c | 2 +-
include/configs/a320evb.h | 6 ++++++
include/configs/at91sam9260ek.h | 2 +-
include/configs/at91sam9261ek.h | 2 +-
include/configs/at91sam9263ek.h | 2 +-
include/configs/at91sam9m10g45ek.h | 2 +-
include/configs/at91sam9rlek.h | 2 +-
include/configs/cpu9260.h | 2 +-
include/configs/davinci_schmoogie.h | 3 +++
include/configs/davinci_sonata.h | 2 ++
include/configs/meesc.h | 2 +-
include/configs/otc570.h | 2 +-
include/configs/pm9261.h | 2 +-
include/configs/pm9263.h | 2 +-
include/configs/pm9g45.h | 2 +-
include/configs/tny_a9260.h | 2 +-
include/dataflash.h | 3 ++-
82 files changed, 88 insertions(+), 97 deletions(-)
Please pull. Thanks!
Anatolij
next prev parent reply other threads:[~2011-11-27 23:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-27 19:28 [U-Boot] Pull request: u-boot-staging Anatolij Gustschin
2011-11-27 23:00 ` Anatolij Gustschin [this message]
2011-11-28 18:57 ` [U-Boot] Pull request: u-boot-staging (updated) Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111128000031.10432bf4@wker \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.