Re: [PATCH] ARM: OMAP3LOGIC: Adding DSS support

[Tony Lindgren <tony@atomide.com>]

Tomi,

* Alex <alexg@meprolight.com> [111208 03:46]:
> This patch adds DSS2 support to the LogicPD OMAP 35x Torpedo boardfile. LCD and
> TV-out are supported.

Want to take this one? Looks OK to me:

Acked-by: Tony Lindgren <tony@atomide.com>
 
> Signed-off-by: Alex Gershgorin <alexg@meprolight.com>
> ---
>  arch/arm/mach-omap2/board-omap3logic.c |  151 ++++++++++++++++++++++++++++++++
>  1 files changed, 151 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
> index 7c0f193..86175fa 100644
> --- a/arch/arm/mach-omap2/board-omap3logic.c
> +++ b/arch/arm/mach-omap2/board-omap3logic.c
> @@ -7,6 +7,9 @@
>   * Copyright (C) 2010 Logic Product Development, Inc.
>   * Peter Barada <peter.barada@logicpd.com>
>   *
> + * Copyright (C) 2011 Meprolight, Ltd.
> + * Alex Gershgorin <alexg@meprolight.com>
> + *
>   * Modified from Beagle, EVM, and RX51
>   *
>   * This program is free software; you can redistribute it and/or modify
> @@ -44,6 +47,10 @@
>  #include <plat/gpmc-smsc911x.h>
>  #include <plat/gpmc.h>
>  #include <plat/sdrc.h>
> +#include <plat/vram.h>
> +
> +#include <video/omapdss.h>
> +#include <video/omap-panel-generic-dpi.h>
>  
>  #define OMAP3LOGIC_SMSC911X_CS			1
>  
> @@ -58,6 +65,14 @@ static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
>  	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
>  };
>  
> +static struct regulator_consumer_supply omap3logic_vdds_supplies[] = {
> +	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
> +	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
> +};
> +
> +static struct regulator_consumer_supply omap3logic_vdac_supply =
> +	REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
> +
>  /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
>  static struct regulator_init_data omap3logic_vmmc1 = {
>  	.constraints = {
> @@ -74,6 +89,34 @@ static struct regulator_init_data omap3logic_vmmc1 = {
>  	.consumer_supplies      = omap3logic_vmmc1_supply,
>  };
>  
> +static struct regulator_init_data omap3logic_vpll2 = {
> +	.constraints = {
> +		.name			= "VDDS_DSI",
> +		.min_uV			= 1800000,
> +		.max_uV			= 1800000,
> +		.apply_uV		= true,
> +		.always_on		= true,
> +		.valid_modes_mask	= REGULATOR_MODE_NORMAL
> +					| REGULATOR_MODE_STANDBY,
> +		.valid_ops_mask		= REGULATOR_CHANGE_MODE,
> +	},
> +	.num_consumer_supplies  = ARRAY_SIZE(omap3logic_vdds_supplies),
> +	.consumer_supplies      = omap3logic_vdds_supplies,
> +};
> +
> +static struct regulator_init_data omap3logic_vdac = {
> +	.constraints = {
> +		.min_uV			= 1800000,
> +		.max_uV			= 1800000,
> +		.valid_modes_mask	= REGULATOR_MODE_NORMAL
> +					| REGULATOR_MODE_STANDBY,
> +		.valid_ops_mask		= REGULATOR_CHANGE_MODE
> +					| REGULATOR_CHANGE_STATUS,
> +	},
> +	.num_consumer_supplies	= 1,
> +	.consumer_supplies	= &omap3logic_vdac_supply,
> +};
> +
>  static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
>  	.gpio_base	= OMAP_MAX_GPIO_LINES,
>  	.irq_base	= TWL4030_GPIO_IRQ_BASE,
> @@ -91,6 +134,8 @@ static struct twl4030_platform_data omap3logic_twldata = {
>  	/* platform_data for children goes here */
>  	.gpio		= &omap3logic_gpio_data,
>  	.vmmc1		= &omap3logic_vmmc1,
> +	.vpll2		= &omap3logic_vpll2,
> +	.vdac		= &omap3logic_vdac,
>  };
>  
>  static int __init omap3logic_i2c_init(void)
> @@ -182,6 +227,110 @@ static inline void __init board_smsc911x_init(void)
>  	gpmc_smsc911x_init(&board_smsc911x_data);
>  }
>  
> +#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
> +
> +#define OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO	154
> +#define OMAP3_TORPEDO_LCD_ENABLE_GPIO		155
> +#define OMAP3_TORPEDO_LCD_PWM_GPIO		56
> +
> +static struct gpio omap3logic_dss_gpios[] __initdata = {
> +	{OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "lcd_bl_pwr"},
> +	{OMAP3_TORPEDO_LCD_PWM_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable"},
> +	{OMAP3_TORPEDO_LCD_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"},
> +};
> +
> +static int omap3logic_enable_lcd(struct omap_dss_device *dssdev)
> +{
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_ENABLE_GPIO, 1);
> +	msleep(20);
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, 1);
> +
> +	return 0;
> +}
> +
> +static void omap3logic_disable_lcd(struct omap_dss_device *dssdev)
> +{
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_ENABLE_GPIO, 0);
> +	msleep(20);
> +	gpio_set_value_cansleep(OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, 0);
> +}
> +
> +static struct panel_generic_dpi_data lcd_panel = {
> +	.name			= "sharp_lq",
> +	.platform_enable	= omap3logic_enable_lcd,
> +	.platform_disable	= omap3logic_disable_lcd,
> +};
> +
> +static struct omap_dss_device omap3logic_lcd_device = {
> +	.name			= "lcd",
> +	.driver_name		= "generic_dpi_panel",
> +	.type			= OMAP_DISPLAY_TYPE_DPI,
> +	.data			= &lcd_panel,
> +	.phy.dpi.data_lines	= 16,
> +};
> +
> +static struct omap_dss_device omap3logic_tv_device = {
> +	.name			= "tv",
> +	.driver_name		= "venc",
> +	.type			= OMAP_DISPLAY_TYPE_VENC,
> +	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
> +};
> +
> +static struct omap_dss_device *omap3logic_dss_devices[] = {
> +	&omap3logic_lcd_device,
> +	&omap3logic_tv_device,
> +};
> +
> +static struct omap_dss_board_info omap3logic_dss_data = {
> +	.num_devices		= ARRAY_SIZE(omap3logic_dss_devices),
> +	.devices		= omap3logic_dss_devices,
> +	.default_device		= &omap3logic_lcd_device,
> +};
> +
> +static void __init omap3logic_display_init(void)
> +{
> +	int r;
> +
> +	r = gpio_request_array(omap3logic_dss_gpios,
> +			       ARRAY_SIZE(omap3logic_dss_gpios));
> +	if (r) {
> +		printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
> +		return;
> +	}
> +
> +	gpio_export(OMAP3_TORPEDO_LCD_BACKLIGHT_GPIO, 0);
> +	gpio_export(OMAP3_TORPEDO_LCD_ENABLE_GPIO, 0);
> +	gpio_export(OMAP3_TORPEDO_LCD_PWM_GPIO, 0);
> +
> +	r = omap_display_init(&omap3logic_dss_data);
> +	if (r) {
> +		pr_err("OMAP3LOGIC: failed to register DSS device\n");
> +		gpio_free_array(omap3logic_dss_gpios,
> +				ARRAY_SIZE(omap3logic_dss_gpios));
> +	}
> +}
> +
> +static void __init omap3logic_video_mem_init(void)
> +{
> +	/*
> +	 * GFX 480x272x32bpp
> +	 * VID1/2 480x272x32bpp double buffered
> +	 */
> +	omap_vram_set_sdram_vram(PAGE_ALIGN(480 * 272 * 4) +
> +			2 * PAGE_ALIGN(480 * 272 * 4 * 2), 0);
> +}
> +
> +#else
> +static void __init omap3logic_display_init(void) { }
> +static void __init omap3logic_video_mem_init(void){ }
> +#endif /* defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) */
> +
> +static void __init omap3logic_reserve(void)
> +{
> +	omap3logic_video_mem_init();
> +	omap_reserve();
> +}
> +
>  #ifdef CONFIG_OMAP_MUX
>  static struct omap_board_mux board_mux[] __initdata = {
>  	{ .reg_offset = OMAP_MUX_TERMINATOR },
> @@ -197,6 +346,7 @@ static void __init omap3logic_init(void)
>  	omap_sdrc_init(NULL, NULL);
>  	board_mmc_init();
>  	board_smsc911x_init();
> +	omap3logic_display_init();
>  
>  	/* Ensure SDRC pins are mux'd for self-refresh */
>  	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
> @@ -205,6 +355,7 @@ static void __init omap3logic_init(void)
>  
>  MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
>  	.atag_offset	= 0x100,
> +	.reserve	= omap3logic_reserve,
>  	.map_io		= omap3_map_io,
>  	.init_early	= omap35xx_init_early,
>  	.init_irq	= omap3_init_irq,
> -- 
> 1.7.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html