From: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
To: "Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org"
<Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Cc: "ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org"
<ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org>,
"khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org"
<khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org>,
"linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Tang Yuantian <B29983-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Subject: Re: [PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA
Date: Mon, 12 Dec 2011 01:28:06 -0800 [thread overview]
Message-ID: <20111212092806.GA6889@ericsson.com> (raw)
In-Reply-To: <1323663010-32223-1-git-send-email-Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
On Sun, Dec 11, 2011 at 11:10:10PM -0500, Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:
> From: Tang Yuantian <B29983-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
>
> Add support for SMBUS_READ_BLOCK_DATA to the i2c-mpc bus driver.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Signed-off-by: Guenter Roeck <guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
You can not do this. While I may have written this patch originally,
I abandoned it, and you can not use my signature.
Guenter
> ---
> tested on p1022ds
>
> drivers/i2c/busses/i2c-mpc.c | 63 ++++++++++++++++++++++++++++++++---------
> 1 files changed, 49 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 107397a..bba9a07 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -454,7 +454,7 @@ static int mpc_write(struct mpc_i2c *i2c, int target,
> }
>
> static int mpc_read(struct mpc_i2c *i2c, int target,
> - u8 *data, int length, int restart)
> + u8 *data, int length, int restart, bool recv_len)
> {
> unsigned timeout = i2c->adap.timeout;
> int i, result;
> @@ -470,7 +470,7 @@ static int mpc_read(struct mpc_i2c *i2c, int target,
> return result;
>
> if (length) {
> - if (length == 1)
> + if (length == 1 && !recv_len)
> writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
> else
> writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
> @@ -479,17 +479,46 @@ static int mpc_read(struct mpc_i2c *i2c, int target,
> }
>
> for (i = 0; i < length; i++) {
> + u8 byte;
> +
> result = i2c_wait(i2c, timeout, 0);
> if (result < 0)
> return result;
>
> - /* Generate txack on next to last byte */
> - if (i == length - 2)
> - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
> - /* Do not generate stop on last byte */
> - if (i == length - 1)
> - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX);
> - data[i] = readb(i2c->base + MPC_I2C_DR);
> + /*
> + * For block reads, we have to know the total length (1st byte)
> + * before we can determine if we are done.
> + */
> + if (i || !recv_len) {
> + /* Generate txack on next to last byte */
> + if (i == length - 2)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_TXAK);
> + /* Do not generate stop on last byte */
> + if (i == length - 1)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_MTX);
> + }
> +
> + byte = readb(i2c->base + MPC_I2C_DR);
> +
> + /*
> + * Adjust length if first received byte is length.
> + * The length is 1 length byte plus actually data length
> + */
> + if (i == 0 && recv_len) {
> + if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
> + return -EPROTO;
> + length += byte;
> + /*
> + * For block reads, generate txack here if data length
> + * is 1 byte (total length is 2 bytes).
> + */
> + if (length == 2)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_TXAK);
> + }
> + data[i] = byte;
> }
>
> return length;
> @@ -532,12 +561,17 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
> "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
> pmsg->flags & I2C_M_RD ? "read" : "write",
> pmsg->len, pmsg->addr, i + 1, num);
> - if (pmsg->flags & I2C_M_RD)
> - ret =
> - mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
> - else
> + if (pmsg->flags & I2C_M_RD) {
> + bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
> +
> + ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
> + recv_len);
> + if (recv_len && ret > 0)
> + pmsg->len = ret;
> + } else {
> ret =
> mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
> + }
> }
> mpc_i2c_stop(i2c);
> return (ret < 0) ? ret : num;
> @@ -545,7 +579,8 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
>
> static u32 mpc_functionality(struct i2c_adapter *adap)
> {
> - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> + | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
> }
>
> static const struct i2c_algorithm mpc_algo = {
> --
> 1.6.4
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Guenter Roeck <guenter.roeck@ericsson.com>
To: "Yuantian.tang@freescale.com" <Yuantian.tang@freescale.com>
Cc: "ben-linux@fluff.org" <ben-linux@fluff.org>,
"khali@linux-fr.org" <khali@linux-fr.org>,
"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Tang Yuantian <B29983@freescale.com>
Subject: Re: [PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA
Date: Mon, 12 Dec 2011 01:28:06 -0800 [thread overview]
Message-ID: <20111212092806.GA6889@ericsson.com> (raw)
In-Reply-To: <1323663010-32223-1-git-send-email-Yuantian.tang@freescale.com>
On Sun, Dec 11, 2011 at 11:10:10PM -0500, Yuantian.tang@freescale.com wrote:
> From: Tang Yuantian <B29983@freescale.com>
>
> Add support for SMBUS_READ_BLOCK_DATA to the i2c-mpc bus driver.
>
> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
You can not do this. While I may have written this patch originally,
I abandoned it, and you can not use my signature.
Guenter
> ---
> tested on p1022ds
>
> drivers/i2c/busses/i2c-mpc.c | 63 ++++++++++++++++++++++++++++++++---------
> 1 files changed, 49 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index 107397a..bba9a07 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -454,7 +454,7 @@ static int mpc_write(struct mpc_i2c *i2c, int target,
> }
>
> static int mpc_read(struct mpc_i2c *i2c, int target,
> - u8 *data, int length, int restart)
> + u8 *data, int length, int restart, bool recv_len)
> {
> unsigned timeout = i2c->adap.timeout;
> int i, result;
> @@ -470,7 +470,7 @@ static int mpc_read(struct mpc_i2c *i2c, int target,
> return result;
>
> if (length) {
> - if (length == 1)
> + if (length == 1 && !recv_len)
> writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
> else
> writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA);
> @@ -479,17 +479,46 @@ static int mpc_read(struct mpc_i2c *i2c, int target,
> }
>
> for (i = 0; i < length; i++) {
> + u8 byte;
> +
> result = i2c_wait(i2c, timeout, 0);
> if (result < 0)
> return result;
>
> - /* Generate txack on next to last byte */
> - if (i == length - 2)
> - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
> - /* Do not generate stop on last byte */
> - if (i == length - 1)
> - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX);
> - data[i] = readb(i2c->base + MPC_I2C_DR);
> + /*
> + * For block reads, we have to know the total length (1st byte)
> + * before we can determine if we are done.
> + */
> + if (i || !recv_len) {
> + /* Generate txack on next to last byte */
> + if (i == length - 2)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_TXAK);
> + /* Do not generate stop on last byte */
> + if (i == length - 1)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_MTX);
> + }
> +
> + byte = readb(i2c->base + MPC_I2C_DR);
> +
> + /*
> + * Adjust length if first received byte is length.
> + * The length is 1 length byte plus actually data length
> + */
> + if (i == 0 && recv_len) {
> + if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX)
> + return -EPROTO;
> + length += byte;
> + /*
> + * For block reads, generate txack here if data length
> + * is 1 byte (total length is 2 bytes).
> + */
> + if (length == 2)
> + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA
> + | CCR_TXAK);
> + }
> + data[i] = byte;
> }
>
> return length;
> @@ -532,12 +561,17 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
> "Doing %s %d bytes to 0x%02x - %d of %d messages\n",
> pmsg->flags & I2C_M_RD ? "read" : "write",
> pmsg->len, pmsg->addr, i + 1, num);
> - if (pmsg->flags & I2C_M_RD)
> - ret =
> - mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
> - else
> + if (pmsg->flags & I2C_M_RD) {
> + bool recv_len = pmsg->flags & I2C_M_RECV_LEN;
> +
> + ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i,
> + recv_len);
> + if (recv_len && ret > 0)
> + pmsg->len = ret;
> + } else {
> ret =
> mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i);
> + }
> }
> mpc_i2c_stop(i2c);
> return (ret < 0) ? ret : num;
> @@ -545,7 +579,8 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
>
> static u32 mpc_functionality(struct i2c_adapter *adap)
> {
> - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> + | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL;
> }
>
> static const struct i2c_algorithm mpc_algo = {
> --
> 1.6.4
>
>
next prev parent reply other threads:[~2011-12-12 9:28 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 4:10 [PATCH] i2c/busses: (mpc) Add support for SMBUS_READ_BLOCK_DATA Yuantian.tang-KZfg59tc24xl57MIdRCFDg
2011-12-12 4:10 ` Yuantian.tang
[not found] ` <1323663010-32223-1-git-send-email-Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-12-12 9:28 ` Guenter Roeck [this message]
2011-12-12 9:28 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2011-11-15 6:27 Guenter Roeck
2011-11-15 6:27 ` Guenter Roeck
[not found] ` <1321338462-6138-1-git-send-email-guenter.roeck-IzeFyvvaP7pWk0Htik3J/w@public.gmane.org>
2011-11-15 8:54 ` Jean Delvare
2011-11-15 8:54 ` Jean Delvare
[not found] ` <20111115095445.3d34e99e-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-15 16:29 ` Guenter Roeck
2011-11-15 16:29 ` Guenter Roeck
2011-11-15 19:02 ` Tabi Timur-B04825
2011-11-15 19:02 ` Tabi Timur-B04825
[not found] ` <CAOZdJXVq=0pbrPM_-+Kjf3NhON8oN3Me64R6c9qBiAEFuRsDOw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-11-15 19:14 ` Guenter Roeck
2011-11-15 19:14 ` Guenter Roeck
2011-11-15 20:05 ` Jean Delvare
2011-11-15 20:05 ` Jean Delvare
[not found] ` <20111115210528.0f9a0948-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-15 21:14 ` Guenter Roeck
2011-11-15 21:14 ` Guenter Roeck
[not found] ` <CAOZdJXUPO5PyMkAw-2EPvy_qSUuqsgUA7Gr8mKUX7HyShoXk3g@mail.gmail.com>
[not found] ` <E6AF40B3BFC8A9428EACB47497F0F4B62DC687@039-SN1MPN1-002.039d.mgd.msft.net>
[not found] ` <ECEE0D23-8F53-402C-A97F-4DB0F0E9C79B@freescale.com>
[not found] ` <ECEE0D23-8F53-402C-A97F-4DB0F0E9C79B-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2011-11-16 17:28 ` York Sun
2011-11-16 17:28 ` York Sun
2011-11-16 17:36 ` Guenter Roeck
2011-11-16 17:36 ` Guenter Roeck
2011-11-16 17:55 ` York Sun
2011-11-16 17:55 ` York Sun
2011-11-16 18:09 ` Guenter Roeck
2011-11-16 18:09 ` Guenter Roeck
2011-11-16 18:09 ` Jean Delvare
2011-11-16 18:09 ` Jean Delvare
2011-11-16 18:20 ` York Sun
2011-11-16 18:20 ` York Sun
2011-11-16 18:51 ` Guenter Roeck
2011-11-16 18:51 ` Guenter Roeck
2011-11-16 18:56 ` Timur Tabi
2011-11-16 18:56 ` Timur Tabi
2011-11-16 18:58 ` sun york-R58495
2011-11-16 18:58 ` sun york-R58495
2011-11-16 19:10 ` Jean Delvare
2011-11-16 19:10 ` Jean Delvare
[not found] ` <20111116201048.4b7877dd-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-11-16 19:15 ` York Sun
2011-11-16 19:15 ` York Sun
2011-11-16 19:18 ` Jean Delvare
2011-11-16 19:18 ` Jean Delvare
2011-11-16 19:24 ` York Sun
2011-11-16 19:24 ` York Sun
2011-11-17 18:18 ` Guenter Roeck
2011-11-17 18:18 ` Guenter Roeck
2011-11-17 19:23 ` York Sun
2011-11-17 19:23 ` York Sun
2011-11-18 3:15 ` Tang Yuantian-B29983
2011-11-18 3:15 ` Tang Yuantian-B29983
[not found] ` <20111116201847.6b11dc7f-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2011-12-01 7:06 ` Tang Yuantian-B29983
2011-12-01 7:06 ` Tang Yuantian-B29983
2011-12-07 2:52 ` Tang Yuantian-B29983
2011-12-07 2:52 ` Tang Yuantian-B29983
[not found] ` <3C06C26914DACA4BB3A368F78CA0B3A7134583-TcFNo7jSaXM0vywKSws3iq4g8xLGJsHaLnY5E4hWTkheoWH0uzbU5w@public.gmane.org>
2011-12-07 3:20 ` Guenter Roeck
2011-12-07 3:20 ` Guenter Roeck
2011-12-07 5:25 ` Tang Yuantian-B29983
2011-12-07 5:25 ` Tang Yuantian-B29983
[not found] ` <3C06C26914DACA4BB3A368F78CA0B3A71345F2-TcFNo7jSaXM0vywKSws3iq4g8xLGJsHaLnY5E4hWTkheoWH0uzbU5w@public.gmane.org>
2011-12-07 7:29 ` Jean Delvare
2011-12-07 7:29 ` Jean Delvare
[not found] ` <20111207082924.2f88bd5d-R0o5gVi9kd7kN2dkZ6Wm7A@public.gmane.org>
2012-02-23 6:57 ` Huang Changming-R66093
2012-02-23 6:57 ` Huang Changming-R66093
2011-11-16 17:38 ` Jean Delvare
2011-11-16 17:38 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111212092806.GA6889@ericsson.com \
--to=guenter.roeck-izefyvvap7pwk0htik3j/w@public.gmane.org \
--cc=B29983-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=Yuantian.tang-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=ben-linux-elnMNo+KYs3YtjvyW6yDsg@public.gmane.org \
--cc=khali-PUYAD+kWke1g9hUCZPvPmw@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.