From: Kurt Van Dijck <kurt.van.dijck@eia.be>
To: Wolfgang <wutz@unterderbruecke.de>
Cc: linux-can@vger.kernel.org
Subject: backporting can & can-j1939
Date: Tue, 13 Dec 2011 10:53:12 +0100 [thread overview]
Message-ID: <20111213095312.GC430@e-circ.dyndns.org> (raw)
In-Reply-To: <loom.20111212T160733-221@post.gmane.org>
Wolfgang,
I tried myself a little backport of net/can/ into 2.6.31.
It appears quite complex. It may be better to start over
with a fresh kernel, and copy those files from my
can-j1939-modules, since this repository contains
#if KERNEL_VERSION macros that will make it work on 2.6.31.
I'm even using this on 2.6.25, so don't worry, it _will_ work
sooner or later.
I'm not sure exactly how the include/socketcan from can-j1939-modules
should be merged into the kernel source.
I think this is a bit of a manual job to do for the header files.
Anyone better ideas?
Kind regards,
Kurt
next prev parent reply other threads:[~2011-12-13 9:53 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 10:44 using j1939 wutz
2011-12-06 12:14 ` Kurt Van Dijck
2011-12-06 12:28 ` Kurt Van Dijck
2011-12-06 12:37 ` Wolfgang
2011-12-06 13:18 ` Kurt Van Dijck
2011-12-07 8:55 ` Wolfgang
2011-12-07 14:33 ` using j1939: j1939.h Kurt Van Dijck
2011-12-07 14:50 ` Kurt Van Dijck
2011-12-08 12:23 ` Wolfgang
2011-12-08 12:30 ` using j1939: userspace binaries Kurt Van Dijck
2011-12-08 12:48 ` Wolfgang
2011-12-08 13:32 ` Kurt Van Dijck
2011-12-08 14:27 ` Wolfgang
2011-12-08 15:17 ` using j1939: AF_CAN missing Kurt Van Dijck
2011-12-08 15:34 ` Oliver Hartkopp
2011-12-08 15:19 ` iproute2-j1939 Kurt Van Dijck
2011-12-08 15:56 ` iproute2-j1939 Wolfgang
2011-12-08 16:44 ` iproute2-j1939 Wolfgang
2011-12-09 6:55 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 7:28 ` iproute2-j1939 Wolfgang
2011-12-09 7:58 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 8:07 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 8:12 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 9:02 ` iproute2-j1939 Wolfgang
2011-12-09 9:48 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 10:56 ` iproute2-j1939 Wolfgang
2011-12-09 11:03 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 11:12 ` iproute2-j1939 Wolfgang
2011-12-09 11:47 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 12:14 ` iproute2-j1939 Wolfgang
2011-12-06 13:24 ` using j1939 Oliver Hartkopp
2011-12-09 13:47 ` Kurt Van Dijck
2011-12-09 13:58 ` Wolfgang
[not found] ` <20111209143224.GB309@e-circ.dyndns.org>
[not found] ` <20111209144911.144460@gmx.net>
2011-12-09 15:01 ` Kurt Van Dijck
2011-12-09 17:23 ` Wolfgang Wagner
2011-12-12 8:12 ` Kurt Van Dijck
2011-12-12 11:27 ` Wolfgang
2011-12-12 12:40 ` Kurt Van Dijck
2011-12-12 15:10 ` Wolfgang
2011-12-13 9:53 ` Kurt Van Dijck [this message]
2011-12-13 15:20 ` backporting can & can-j1939 Wolfgang
2011-12-13 15:51 ` Kurt Van Dijck
2011-12-13 18:49 ` Wolfgang
2011-12-14 13:29 ` Wolfgang
2011-12-14 15:43 ` Kurt Van Dijck
2011-12-14 18:19 ` Wolfgang
2011-12-14 20:42 ` Using " Kurt Van Dijck
2011-12-15 8:35 ` Wolfgang
2011-12-15 9:20 ` Cross-compiling iproute2-j1939 Kurt Van Dijck
2011-12-15 11:24 ` Wolfgang
2011-12-15 12:04 ` replacing iproute2 & can-utils with j1939 variants Kurt Van Dijck
2011-12-15 13:43 ` Wolfgang
2011-12-15 14:00 ` using can-j1939 Kurt Van Dijck
2011-12-15 14:49 ` Wolfgang
2011-12-15 15:06 ` Kurt Van Dijck
2011-12-15 15:16 ` Wolfgang
2011-12-15 15:50 ` Kurt Van Dijck
2011-12-15 16:17 ` Wolfgang
2011-12-16 8:37 ` Kurt Van Dijck
2011-12-16 9:00 ` Wolfgang
2011-12-16 9:33 ` Kurt Van Dijck
2011-12-16 14:29 ` Wolfgang
2011-12-17 19:20 ` Kurt Van Dijck
2011-12-20 10:35 ` API calls Wolfgang
2011-12-20 11:00 ` Kurt Van Dijck
2011-12-20 14:49 ` Wolfgang
2011-12-20 15:05 ` Kurt Van Dijck
2011-12-20 15:43 ` Wolfgang
2011-12-20 16:32 ` Kurt Van Dijck
2011-12-21 10:46 ` Wolfgang
2011-12-21 13:43 ` using can-j1939 Kurt Van Dijck
2011-12-21 15:11 ` Wolfgang
2011-12-21 15:53 ` Kurt Van Dijck
2011-12-22 13:06 ` Wolfgang
2011-12-23 11:04 ` Kurt Van Dijck
2011-12-28 10:49 ` Wolfgang
2012-01-04 9:47 ` Kurt Van Dijck
2012-01-04 16:28 ` recv list Wolfgang
2012-01-04 20:41 ` Kurt Van Dijck
2012-01-05 10:55 ` Wolfgang
2012-01-05 12:09 ` Kurt Van Dijck
2012-01-05 21:24 ` Wolfgang
2012-01-06 12:25 ` Kurt Van Dijck
2012-01-06 18:25 ` Wolfgang
2012-01-09 9:33 ` Kurt Van Dijck
2012-01-09 10:02 ` Changing addr with bind() Kurt Van Dijck
2012-01-09 10:23 ` Kurt Van Dijck
2012-01-09 10:46 ` recv list Wolfgang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111213095312.GC430@e-circ.dyndns.org \
--to=kurt.van.dijck@eia.be \
--cc=linux-can@vger.kernel.org \
--cc=wutz@unterderbruecke.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.