From: Wolfgang <wutz@unterderbruecke.de>
To: linux-can@vger.kernel.org
Subject: Re: recv list
Date: Fri, 6 Jan 2012 18:25:59 +0000 (UTC) [thread overview]
Message-ID: <loom.20120106T190304-160@post.gmane.org> (raw)
In-Reply-To: 20120106122550.GA17043@e-circ.dyndns.org
> tried 'jspy' yet?
It is not possible because at the moment I am working with a simulation tool,
to get out how things are working, is this a problem?
Now I have a different question, is it possible to bind different sockets with
different src.addr to one interface. Because it is saying 'bind failed: Device
or resource busy' if I want to do this ('$ip addr add j1939 0x01 dev can0' is
working, of course) Or do I have to do this with recvmsg()?
Because as you know I want keep the various src address'.
Kind regards,
Wolfgang
next prev parent reply other threads:[~2012-01-06 18:26 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 10:44 using j1939 wutz
2011-12-06 12:14 ` Kurt Van Dijck
2011-12-06 12:28 ` Kurt Van Dijck
2011-12-06 12:37 ` Wolfgang
2011-12-06 13:18 ` Kurt Van Dijck
2011-12-07 8:55 ` Wolfgang
2011-12-07 14:33 ` using j1939: j1939.h Kurt Van Dijck
2011-12-07 14:50 ` Kurt Van Dijck
2011-12-08 12:23 ` Wolfgang
2011-12-08 12:30 ` using j1939: userspace binaries Kurt Van Dijck
2011-12-08 12:48 ` Wolfgang
2011-12-08 13:32 ` Kurt Van Dijck
2011-12-08 14:27 ` Wolfgang
2011-12-08 15:17 ` using j1939: AF_CAN missing Kurt Van Dijck
2011-12-08 15:34 ` Oliver Hartkopp
2011-12-08 15:19 ` iproute2-j1939 Kurt Van Dijck
2011-12-08 15:56 ` iproute2-j1939 Wolfgang
2011-12-08 16:44 ` iproute2-j1939 Wolfgang
2011-12-09 6:55 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 7:28 ` iproute2-j1939 Wolfgang
2011-12-09 7:58 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 8:07 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 8:12 ` iproute2-j1939 Oliver Hartkopp
2011-12-09 9:02 ` iproute2-j1939 Wolfgang
2011-12-09 9:48 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 10:56 ` iproute2-j1939 Wolfgang
2011-12-09 11:03 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 11:12 ` iproute2-j1939 Wolfgang
2011-12-09 11:47 ` iproute2-j1939 Kurt Van Dijck
2011-12-09 12:14 ` iproute2-j1939 Wolfgang
2011-12-06 13:24 ` using j1939 Oliver Hartkopp
2011-12-09 13:47 ` Kurt Van Dijck
2011-12-09 13:58 ` Wolfgang
[not found] ` <20111209143224.GB309@e-circ.dyndns.org>
[not found] ` <20111209144911.144460@gmx.net>
2011-12-09 15:01 ` Kurt Van Dijck
2011-12-09 17:23 ` Wolfgang Wagner
2011-12-12 8:12 ` Kurt Van Dijck
2011-12-12 11:27 ` Wolfgang
2011-12-12 12:40 ` Kurt Van Dijck
2011-12-12 15:10 ` Wolfgang
2011-12-13 9:53 ` backporting can & can-j1939 Kurt Van Dijck
2011-12-13 15:20 ` Wolfgang
2011-12-13 15:51 ` Kurt Van Dijck
2011-12-13 18:49 ` Wolfgang
2011-12-14 13:29 ` Wolfgang
2011-12-14 15:43 ` Kurt Van Dijck
2011-12-14 18:19 ` Wolfgang
2011-12-14 20:42 ` Using " Kurt Van Dijck
2011-12-15 8:35 ` Wolfgang
2011-12-15 9:20 ` Cross-compiling iproute2-j1939 Kurt Van Dijck
2011-12-15 11:24 ` Wolfgang
2011-12-15 12:04 ` replacing iproute2 & can-utils with j1939 variants Kurt Van Dijck
2011-12-15 13:43 ` Wolfgang
2011-12-15 14:00 ` using can-j1939 Kurt Van Dijck
2011-12-15 14:49 ` Wolfgang
2011-12-15 15:06 ` Kurt Van Dijck
2011-12-15 15:16 ` Wolfgang
2011-12-15 15:50 ` Kurt Van Dijck
2011-12-15 16:17 ` Wolfgang
2011-12-16 8:37 ` Kurt Van Dijck
2011-12-16 9:00 ` Wolfgang
2011-12-16 9:33 ` Kurt Van Dijck
2011-12-16 14:29 ` Wolfgang
2011-12-17 19:20 ` Kurt Van Dijck
2011-12-20 10:35 ` API calls Wolfgang
2011-12-20 11:00 ` Kurt Van Dijck
2011-12-20 14:49 ` Wolfgang
2011-12-20 15:05 ` Kurt Van Dijck
2011-12-20 15:43 ` Wolfgang
2011-12-20 16:32 ` Kurt Van Dijck
2011-12-21 10:46 ` Wolfgang
2011-12-21 13:43 ` using can-j1939 Kurt Van Dijck
2011-12-21 15:11 ` Wolfgang
2011-12-21 15:53 ` Kurt Van Dijck
2011-12-22 13:06 ` Wolfgang
2011-12-23 11:04 ` Kurt Van Dijck
2011-12-28 10:49 ` Wolfgang
2012-01-04 9:47 ` Kurt Van Dijck
2012-01-04 16:28 ` recv list Wolfgang
2012-01-04 20:41 ` Kurt Van Dijck
2012-01-05 10:55 ` Wolfgang
2012-01-05 12:09 ` Kurt Van Dijck
2012-01-05 21:24 ` Wolfgang
2012-01-06 12:25 ` Kurt Van Dijck
2012-01-06 18:25 ` Wolfgang [this message]
2012-01-09 9:33 ` Kurt Van Dijck
2012-01-09 10:02 ` Changing addr with bind() Kurt Van Dijck
2012-01-09 10:23 ` Kurt Van Dijck
2012-01-09 10:46 ` recv list Wolfgang
-- strict thread matches above, loose matches on Subject: below --
2012-01-09 13:26 Kurt Van Dijck
2012-01-09 16:35 ` Wolfgang
2012-01-10 8:51 ` Kurt Van Dijck
2012-01-10 10:45 ` Wolfgang
2012-01-10 15:23 ` Kurt Van Dijck
2012-01-12 15:23 ` Wolfgang
2012-01-12 15:43 ` Kurt Van Dijck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=loom.20120106T190304-160@post.gmane.org \
--to=wutz@unterderbruecke.de \
--cc=linux-can@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.