[U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board

[Marek Vasut <marek.vasut@gmail.com>]

> Add initial support for Freescale MX28EVK board.
> 
> Tested boot via SD card and by loading a kernel via TFTP through
> the FEC interface.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> - For correct operation of saving environment variables into the SD card,
> the following patch is needed:
> http://lists.denx.de/pipermail/u-boot/2011-November/111448.html
> Changes since v5:
> - Fix tab vs spaces on mx28evk.h
> - Change return value on dram_init()
> Changes since v4:
> - No changes
> Changes since v3:
> - Fix Copyright in mx28evk.h
> - Call mx28_dram_init from dram_init
> Changes since v2:
> - Generate the patch again due to error in applying unrelated changes
> Changes since v1:
> - Read the MAC from fuses
> - Use tabs instead of space in u-boot.bd
> - Use puts instead of print
> - Factor out mac reading function
> - Factor out ddr size calculation function
> - Use GENERATED_GBL_DATA_SIZE
> - Protect CONFIG_ENV_IS_IN_MMC
>  MAINTAINERS                       |    1 +
>  board/freescale/mx28evk/Makefile  |   49 ++++++++++
>  board/freescale/mx28evk/iomux.c   |  138 +++++++++++++++++++++++++++++
>  board/freescale/mx28evk/mx28evk.c |  169
> +++++++++++++++++++++++++++++++++++ board/freescale/mx28evk/u-boot.bd |  
> 14 +++
>  boards.cfg                        |    1 +
>  include/configs/mx28evk.h         |  176
> +++++++++++++++++++++++++++++++++++++ 7 files changed, 548 insertions(+),
> 0 deletions(-)
>  create mode 100644 board/freescale/mx28evk/Makefile
>  create mode 100644 board/freescale/mx28evk/iomux.c
>  create mode 100644 board/freescale/mx28evk/mx28evk.c
>  create mode 100644 board/freescale/mx28evk/u-boot.bd
>  create mode 100644 include/configs/mx28evk.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a56ca10..72e1089 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -639,6 +639,7 @@ Kristoffer Ericson <kristoffer.ericson@gmail.com>
>  Fabio Estevam <fabio.estevam@freescale.com>
> 
>  	mx25pdk		i.MX25
> +	mx28evk		i.MX28
>  	mx31pdk		i.MX31
>  	mx53ard		i.MX53
>  	mx53smd		i.MX53
> diff --git a/board/freescale/mx28evk/Makefile
> b/board/freescale/mx28evk/Makefile new file mode 100644
> index 0000000..7459107
> --- /dev/null
> +++ b/board/freescale/mx28evk/Makefile
> @@ -0,0 +1,49 @@
> +#
> +# (C) Copyright 2000-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).o
> +
> +ifndef	CONFIG_SPL_BUILD
> +COBJS	:= mx28evk.o
> +else
> +COBJS	:= iomux.o
> +endif
> +
> +SRCS	:= $(COBJS:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS)
> +	$(call cmd_link_o_target, $(OBJS))
> +
> +all:	$(ALL)
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/freescale/mx28evk/iomux.c
> b/board/freescale/mx28evk/iomux.c new file mode 100644
> index 0000000..904e3f3
> --- /dev/null
> +++ b/board/freescale/mx28evk/iomux.c
> @@ -0,0 +1,138 @@
> +/*
> + * Freescale MX28EVK IOMUX setup
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +
> +#define	MUX_CONFIG_SSP0	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> +#define	MUX_CONFIG_ENET	(MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> +#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> +
> +const iomux_cfg_t iomux_setup[] = {
> +	/* DUART */
> +	MX28_PAD_PWM0__DUART_RX,
> +	MX28_PAD_PWM1__DUART_TX,
> +
> +	/* MMC0 */
> +	MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
> +	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
> +		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
> +	MX28_PAD_SSP0_SCK__SSP0_SCK |
> +		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
> +	/* write protect */
> +	MX28_PAD_SSP1_SCK__GPIO_2_12,
> +	/* MMC0 slot power enable */
> +	MX28_PAD_PWM3__GPIO_3_28 |
> +		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
> +
> +	/* FEC0 */
> +	MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
> +	/* FEC0 Enable */
> +	MX28_PAD_SSP1_DATA3__GPIO_2_15 |
> +		(MXS_PAD_12MA | MXS_PAD_3V3),
> +	/* FEC0 Reset */
> +	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
> +		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
> +
> +	/* FEC1 */
> +	MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
> +	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
> +
> +	/* EMI */
> +	MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
> +
> +	MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
> +	MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
> +};
> +
> +void board_init_ll(void)
> +{
> +	mx28_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup));
> +}
> diff --git a/board/freescale/mx28evk/mx28evk.c
> b/board/freescale/mx28evk/mx28evk.c new file mode 100644
> index 0000000..0d04d44
> --- /dev/null
> +++ b/board/freescale/mx28evk/mx28evk.c
> @@ -0,0 +1,169 @@
> +/*
> + * Freescale MX28EVK board
> + *
> + * (C) Copyright 2011 Freescale Semiconductor, Inc.
> + *
> + * Author: Fabio Estevam <fabio.estevam@freescale.com>
> + *
> + * Based on m28evk.c:
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <linux/mii.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <errno.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Functions
> + */
> +int board_early_init_f(void)
> +{
> +	/* IO0 clock at 480MHz */
> +	mx28_set_ioclk(MXC_IOCLK0, 480000);
> +	/* IO1 clock at 480MHz */
> +	mx28_set_ioclk(MXC_IOCLK1, 480000);
> +
> +	/* SSP0 clock at 96MHz */
> +	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
> +	/* SSP2 clock at 96MHz */
> +	mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
> +
> +	return 0;
> +}
> +
> +int dram_init(void)
> +{
> +	return mx28_dram_init();
> +}
> +
> +int board_init(void)
> +{
> +	/* Adress of boot parameters */
> +	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> +	return 0;
> +}
> +
> +#ifdef	CONFIG_CMD_MMC
> +static int mx28evk_mmc_wp(int id)
> +{
> +	if (id != 0) {
> +		printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
> +		return 1;
> +	}
> +
> +	return gpio_get_value(MX28_PAD_SSP1_SCK__GPIO_2_12);
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> +	/* Configure WP as input */
> +	gpio_direction_input(MX28_PAD_SSP1_SCK__GPIO_2_12);
> +
> +	/* Configure MMC0 Power Enable */
> +	gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
> +
> +	return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp);
> +}
> +#endif
> +
> +#ifdef	CONFIG_CMD_NET
> +
> +#define	MII_OPMODE_STRAP_OVERRIDE	0x16
> +#define	MII_PHY_CTRL1			0x1e
> +#define	MII_PHY_CTRL2			0x1f
> +
> +int fecmxc_mii_postcall(int phy)
> +{
> +	miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
> +	miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
> +	if (phy == 3)
> +		miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
> +	return 0;
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> +	struct mx28_clkctrl_regs *clkctrl_regs =
> +		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> +	struct eth_device *dev;
> +	int ret;
> +
> +	ret = cpu_eth_init(bis);
> +
> +	/* MX28EVK uses ENET_CLK PAD to drive FEC clock */
> +	writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN,
> +					&clkctrl_regs->hw_clkctrl_enet);
> +
> +	/* Power-on FECs */
> +	gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0);
> +
> +	/* Reset FEC PHYs */
> +	gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0);
> +	udelay(200);
> +	gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1);
> +
> +	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
> +	if (ret) {
> +		puts("FEC MXS: Unable to init FEC0\n");
> +		return ret;
> +	}
> +
> +	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
> +	if (ret) {
> +		puts("FEC MXS: Unable to init FEC1\n");
> +		return ret;
> +	}
> +
> +	dev = eth_get_dev_by_name("FEC0");
> +	if (!dev) {
> +		puts("FEC MXS: Unable to get FEC0 device entry\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> +	if (ret) {
> +		puts("FEC MXS: Unable to register FEC0 mii postcall\n");
> +		return ret;
> +	}
> +
> +	dev = eth_get_dev_by_name("FEC1");
> +	if (!dev) {
> +		puts("FEC MXS: Unable to get FEC1 device entry\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> +	if (ret) {
> +		puts("FEC MXS: Unable to register FEC1 mii postcall\n");
> +		return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +#endif
> diff --git a/board/freescale/mx28evk/u-boot.bd
> b/board/freescale/mx28evk/u-boot.bd new file mode 100644
> index 0000000..c60615a
> --- /dev/null
> +++ b/board/freescale/mx28evk/u-boot.bd
> @@ -0,0 +1,14 @@
> +sources {
> +	u_boot_spl="spl/u-boot-spl.bin";
> +	u_boot="u-boot.bin";
> +}
> +
> +section (0) {
> +	load u_boot_spl > 0x0000;
> +	load ivt (entry = 0x0014) > 0x8000;
> +	hab call 0x8000;
> +
> +	load u_boot > 0x40000100;
> +	load ivt (entry = 0x40000100) > 0x8000;
> +	hab call 0x8000;
> +}
> diff --git a/boards.cfg b/boards.cfg
> index 1e5b3e0..e859024 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -160,6 +160,7 @@ zmx25                        arm         arm926ejs  
> zmx25               syteco imx27lite                    arm        
> arm926ejs   imx27lite           logicpd        mx27 magnesium             
>       arm         arm926ejs   imx27lite           logicpd        mx27
> m28evk                       arm         arm926ejs   -                  
> denx           mx28 +mx28evk                      arm         arm926ejs  
> -                   freescale      mx28 nhk8815                      arm  
>       arm926ejs   nhk8815             st             nomadik
> nhk8815_onenand              arm         arm926ejs   nhk8815            
> st             nomadik       nhk8815:BOOT_ONENAND omap1610h2		     arm	
> arm926ejs   omap1610inn	 ti		omap	    omap1610inn:CS3_BOOT 
diff --git
> a/include/configs/mx28evk.h b/include/configs/mx28evk.h new file mode
> 100644
> index 0000000..5b8a1bf
> --- /dev/null
> +++ b/include/configs/mx28evk.h
> @@ -0,0 +1,176 @@
> +/*
> + * (C) Copyright 2011 Freescale Semiconductor, Inc.
> + * Author: Fabio Estevam <fabio.estevam@freescale.com>
> + *
> + * Based on m28evk.h:
> + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
> + * GNU General Public License for more details.
> + */
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <asm/arch/regs-base.h>
> +
> +/*
> + * SoC configurations
> + */
> +#define CONFIG_MX28				/* i.MX28 SoC */
> +#define CONFIG_MXS_GPIO			/* GPIO control */
> +#define CONFIG_SYS_HZ		1000		/* Ticks per second */
> +
> +#define CONFIG_MACH_TYPE	MACH_TYPE_MX28EVK
> +
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_SYS_ICACHE_OFF
> +#define CONFIG_SYS_DCACHE_OFF
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_ARCH_CPU_INIT
> +#define CONFIG_ARCH_MISC_INIT
> +
> +/*
> + * SPL
> + */
> +#define CONFIG_SPL
> +#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
> +#define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mx28"
> +#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds"
> +#define CONFIG_SPL_LIBCOMMON_SUPPORT
> +#define CONFIG_SPL_LIBGENERIC_SUPPORT
> +
> +/*
> + * U-Boot Commands
> + */
> +#include <config_cmd_default.h>
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_CMD_FAT
> +
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_GPIO
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_NFS
> +#define CONFIG_CMD_PING
> +
> +/*
> + * Memory configurations
> + */
> +#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
> +#define PHYS_SDRAM_1			0x40000000	/* Base address */
> +#define PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM */
> +#define CONFIG_STACKSIZE		(128 * 1024)	/* 128 KB stack */
> +#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for 
malloc */
> +#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
> +#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test 
*/
> +#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
> +/* Point initial SP in SRAM so SPL can use it too. */
> +
> +#define CONFIG_SYS_INIT_RAM_ADDR	0x00002000
> +#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET \
> +	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_ADDR \
> +	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
> +/*
> + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
> + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
> + * binary. In case there was more of this mess, 0x100 bytes are skipped.
> + */
> +#define CONFIG_SYS_TEXT_BASE	0x40000100
> +
> +#define CONFIG_ENV_OVERWRITE
> +/*
> + * U-Boot general configurations
> + */
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_PROMPT	"MX28EVK U-Boot > "
> +#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
> +#define CONFIG_SYS_PBSIZE	\
> +	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> +						/* Print buffer size */
> +#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
> +#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
> +						/* Boot argument buffer size */
> +#define CONFIG_VERSION_VARIABLE	/* U-BOOT version */
> +#define CONFIG_AUTO_COMPLETE		/* Command auto complete */
> +#define CONFIG_CMDLINE_EDITING		/* Command history etc */
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
> +
> +/*
> + * Serial Driver
> + */
> +#define CONFIG_PL011_SERIAL
> +#define CONFIG_PL011_CLOCK		24000000
> +#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
> +#define CONFIG_CONS_INDEX		0
> +#define CONFIG_BAUDRATE			115200	/* Default baud rate */
> +#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
> +
> +/*
> + * MMC Driver
> + */
> +#define CONFIG_ENV_IS_IN_MMC
> +#define CONFIG_ENV_OFFSET	(256 * 1024)
> +#define CONFIG_ENV_SIZE	(16 * 1024)
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_CMD_SAVEENV
> +#ifdef	CONFIG_CMD_MMC
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_MXS_MMC
> +#endif
> +
> +/*
> + * Ethernet on SOC (FEC)
> + */
> +#ifdef	CONFIG_CMD_NET
> +#define CONFIG_NET_MULTI
> +#define CONFIG_ETHPRIME	"FEC0"
> +#define CONFIG_FEC_MXC
> +#define CONFIG_FEC_MXC_MULTI
> +#define CONFIG_MII
> +#define CONFIG_DISCOVER_PHY
> +#define CONFIG_FEC_XCV_TYPE	RMII
> +#define CONFIG_MX28_FEC_MAC_IN_OCOTP
> +#endif
> +
> +/*
> + * Boot Linux
> + */
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_BOOTDELAY	3
> +#define CONFIG_BOOTFILE	"uImage"
> +#define CONFIG_BOOTCOMMAND	"run bootcmd_net"
> +#define CONFIG_LOADADDR	0x42000000
> +#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
> +
> +/*
> + * Extra Environments
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +	"console_fsl=console=ttyAM0" \
> +	"console_mainline=console=ttyAMA0" \
> +	"netargs=setenv bootargs console=${console_mainline}" \
> +		"root=/dev/nfs " \
> +		"ip=dhcp nfsroot=${serverip}:${nfsroot}\0" \
> +	"bootcmd_net=echo Booting from net ...; " \
> +		"run netargs; " \
> +		"dhcp ${uimage}; bootm\0" \
> +
> +#endif /* __CONFIG_H */

Acked-by: Marek Vasut <marek.vasut@gmail.com>