From: Dave Jones <davej@redhat.com>
To: "Grumbach, Emmanuel" <emmanuel.grumbach@intel.com>
Cc: Dan Williams <dcbw@redhat.com>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"Guy, Wey-Yi W" <wey-yi.w.guy@intel.com>,
Linux Wireless <linux-wireless@vger.kernel.org>
Subject: Re: iwlwifi worse than ever in current git.
Date: Wed, 11 Jan 2012 14:50:55 -0500 [thread overview]
Message-ID: <20120111195055.GA5140@redhat.com> (raw)
In-Reply-To: <0BA3FCBA62E2DC44AF3030971E174FB306429E@HASMSX103.ger.corp.intel.com>
On Wed, Jan 11, 2012 at 12:38:43PM +0000, Grumbach, Emmanuel wrote:
> I am missing logs here... You seem to reauthenticate but I can't see disconnection... weird
Ok, here's a fresh log.
wireless was working, (with 11n_disable=1)
unload, and reload without the 11n_disable=1 ..
[16421.730025] wlan0: deauthenticating from b8:c7:5d:0c:39:87 by local choice (reason=3)
[16421.735002] ieee80211 phy0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-16)
[16421.736095] ieee80211 phy0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-16)
[16421.737548] ieee80211 phy0: failed to remove key (0, b8:c7:5d:0c:39:87) from hardware (-16)
[16421.738400] wlan0: moving STA b8:c7:5d:0c:39:87 to state 2
[16421.738646] wlan0: moving STA b8:c7:5d:0c:39:87 to state 1
[16421.738878] wlan0: moving STA b8:c7:5d:0c:39:87 to state 0
[16421.741175] cfg80211: Calling CRDA to update world regulatory domain
[16421.777981] iwlwifi 0000:04:00.0: PCI INT A disabled
[16421.803665] cfg80211: World regulatory domain updated:
[16421.803924] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16421.808846] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16421.811357] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16421.811739] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16421.812193] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16421.812566] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16421.820504] cfg80211: Calling CRDA for country: US
[16421.918341] cfg80211: Calling CRDA to update world regulatory domain
[16421.949295] cfg80211: World regulatory domain updated:
[16421.949559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16421.949966] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16421.950851] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16421.951528] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[16421.951911] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16421.952651] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16422.035828] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[16422.036165] Copyright(c) 2003-2011 Intel Corporation
[16422.036582] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[16422.036957] iwlwifi 0000:04:00.0: setting latency timer to 64
[16422.037338] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000
[16422.037620] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90011560000
[16422.037930] iwlwifi 0000:04:00.0: HW Revision ID = 0x0
[16422.038381] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X
[16422.038915] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG enabled
[16422.041287] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[16422.041569] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[16422.041881] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[16422.042213] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_P2P disabled
[16422.042517] iwlwifi 0000:04:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[16422.043276] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[16422.075500] iwlwifi 0000:04:00.0: device EEPROM VER=0x120, CALIB=0x4
[16422.075809] iwlwifi 0000:04:00.0: Device SKU: 0xF0
[16422.076390] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[16422.121284] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692
[16422.122291] Registered led device: phy0-led
[16422.124681] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[16422.155786] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[16422.159119] iwlwifi 0000:04:00.0: Radio type=0x0-0x2-0x0
[16422.201065] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 4 WrPtr: 0
[16422.201065] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 0 on FIFO 3
[16422.201065] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 1 on FIFO 2
[16422.201065] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 2 on FIFO 1
[16422.201065] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 3 on FIFO 0
[16422.201065] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 4 on FIFO 7
[16422.263369] cfg80211: Calling CRDA for country: US
[16422.287176] cfg80211: Regulatory domain changed to country: US
[16422.287457] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16422.287849] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[16422.288337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[16422.288703] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16422.289090] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16422.289455] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16422.289824] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[16422.318523] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
[16422.321880] iwlwifi 0000:04:00.0: Radio type=0x0-0x2-0x0
[16422.360115] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 4 WrPtr: 0
[16422.360115] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 0 on FIFO 3
[16422.360115] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 1 on FIFO 2
[16422.360115] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 2 on FIFO 1
[16422.360115] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 3 on FIFO 0
[16422.360115] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate AC/CMD Queue 4 on FIFO 7
[16422.376787] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[16427.671916] wlan0: authenticate with b8:c7:5d:0c:39:87 (try 1)
[16427.674716] wlan0: authenticated
[16427.678205] wlan0: associate with b8:c7:5d:0c:39:87 (try 1)
[16427.681953] wlan0: RX AssocResp from b8:c7:5d:0c:39:87 (capab=0x431 status=0 aid=3)
[16427.682325] wlan0: associated
[16427.682473] wlan0: moving STA b8:c7:5d:0c:39:87 to state 1
[16427.682731] wlan0: moving STA b8:c7:5d:0c:39:87 to state 2
[16427.700757] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[16427.701667] cfg80211: Calling CRDA for country: US
[16427.721184] cfg80211: Regulatory domain changed to country: US
[16427.721455] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[16427.721829] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[16427.722199] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[16427.722566] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16427.722924] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16427.723289] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[16427.723651] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[16428.706438] wlan0: moving STA b8:c7:5d:0c:39:87 to state 3
[16438.802048] wlan0: no IPv6 routers present
wifi is back up.
Shortly afterwards ..
[16520.224964] iwlwifi 0000:04:00.0: U iwlagn_tx_agg_start Can proceed: ssn = next_recl = 124
[16520.228038] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 11 WrPtr: 124
[16520.228358] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate BA Queue 11 on FIFO 1
[16520.229059] iwlwifi 0000:04:00.0: Tx aggregation enabled on ra = b8:c7:5d:0c:39:87 tid = 0
[16531.888296] iwlwifi 0000:04:00.0: U iwlagn_tx_agg_stop Can proceed: ssn = next_recl = 631
[16531.888793] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 11 WrPtr: 0
[16531.889247] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Deactivate AC/CMD Queue 11 on FIFO 0
[16552.504609] iwlwifi 0000:04:00.0: U iwlagn_tx_agg_start Can proceed: ssn = next_recl = 697
[16552.508182] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 11 WrPtr: 185
[16552.508609] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate BA Queue 11 on FIFO 1
[16552.509077] iwlwifi 0000:04:00.0: Tx aggregation enabled on ra = b8:c7:5d:0c:39:87 tid = 0
[16564.084058] iwlwifi 0000:04:00.0: U iwlagn_tx_agg_stop Can proceed: ssn = next_recl = 1241
[16564.084506] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 11 WrPtr: 0
[16564.084903] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Deactivate AC/CMD Queue 11 on FIFO 0
[16568.975872] iwlwifi 0000:04:00.0: U iwlagn_tx_agg_start Can proceed: ssn = next_recl = 1298
[16568.978796] iwlwifi 0000:04:00.0: U iwl_trans_set_wr_ptrs Q 11 WrPtr: 18
[16568.979007] iwlwifi 0000:04:00.0: U iwl_trans_tx_queue_set_status Activate BA Queue 11 on FIFO 1
[16568.979734] iwlwifi 0000:04:00.0: Tx aggregation enabled on ra = b8:c7:5d:0c:39:87 tid = 0
[16580.004052] iwlwifi 0000:04:00.0: U iwlagn_tx_agg_stop Can't proceed: ssn 1491, next_recl = 150
A possibly interesting datapoint, is that it seems I can make this happen faster
if there's disk IO going on (I ran a make clean on a kernel tree in this case).
Might be entirely coincidental, but thought I'd mention it..
Dave
next prev parent reply other threads:[~2012-01-11 19:50 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-10 18:49 iwlwifi worse than ever in current git Dave Jones
2012-01-10 17:54 ` Guy, Wey-Yi
2012-01-10 18:53 ` Dan Williams
2012-01-10 18:53 ` Dan Williams
2012-01-10 20:40 ` Grumbach, Emmanuel
2012-01-10 20:40 ` Grumbach, Emmanuel
2012-01-11 1:42 ` Dave Jones
2012-01-11 1:42 ` Dave Jones
2012-01-11 5:31 ` Grumbach, Emmanuel
2012-01-11 12:38 ` Grumbach, Emmanuel
2012-01-11 12:38 ` Grumbach, Emmanuel
2012-01-11 19:28 ` Dave Jones
2012-01-11 19:50 ` Dave Jones [this message]
2012-01-11 20:38 ` Grumbach, Emmanuel
2012-01-19 6:47 ` Emmanuel Grumbach
2012-01-19 6:47 ` Emmanuel Grumbach
2012-01-19 18:04 ` Dave Jones
2012-01-19 18:29 ` Dave Jones
2012-01-19 18:29 ` Dave Jones
2012-01-19 19:12 ` Grumbach, Emmanuel
2012-01-19 19:12 ` Grumbach, Emmanuel
2012-01-19 20:38 ` Grumbach, Emmanuel
2012-01-19 20:38 ` Grumbach, Emmanuel
2012-01-19 22:04 ` Dave Jones
2012-01-19 22:04 ` Dave Jones
2012-01-20 6:50 ` Grumbach, Emmanuel
2012-01-20 6:50 ` Grumbach, Emmanuel
2012-01-10 22:05 ` Venkataraman, Meenakshi
2012-01-10 22:05 ` Venkataraman, Meenakshi
2012-01-11 1:42 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120111195055.GA5140@redhat.com \
--to=davej@redhat.com \
--cc=dcbw@redhat.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=wey-yi.w.guy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.