All of lore.kernel.org
 help / color / mirror / Atom feed
From: Russell King <rmk@arm.linux.org.uk>
To: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com>
Cc: gregkh@suse.de, linux-serial@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] amba-pl011: do not disable RTS during shutdown
Date: Tue, 17 Jan 2012 18:40:48 +0000	[thread overview]
Message-ID: <20120117184047.GE22472@flint.arm.linux.org.uk> (raw)
In-Reply-To: <1326796189-21722-1-git-send-email-shreshthakumar.sahu@stericsson.com>

On Tue, Jan 17, 2012 at 03:59:49PM +0530, Shreshtha Kumar SAHU wrote:
> From: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
> 
> In present driver, shutdown clears RTS in CR register. But the
> documentation "Documentation/serial/driver" suggests not to
> disable RTS in shutdown(). Also RTS is preserved between shutdown
> and startup calls, i.e. it is restored in startup if it was enabled
> during shutdown. So that if autorts is set and RTS is set using
> pl011_set_mctrl then it should continue even after shutdown->startup
> sequence. And hence during set_termios it will enable RTS only if RTS
> bit is set in UARTx_CR register. For throttling/unthrottling user
> should call pl011_set_mctrl.
> 
> Change-Id: I743f33fb10e7e655657cd5dae1ec585e914a65bc

Please get rid of this line.

> Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  drivers/tty/serial/amba-pl011.c |   17 ++++++++++++++++-
>  1 files changed, 16 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index 6958594..46a4690 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -160,6 +160,7 @@ struct uart_amba_port {
>  	unsigned int		lcrh_tx;	/* vendor-specific */
>  	unsigned int		lcrh_rx;	/* vendor-specific */
>  	bool			autorts;
> +	bool			rts_state;	/* state during shutdown */

Do we really need a variable to track this?

>  	char			type[12];
>  	bool			interrupt_may_hang; /* vendor-specific */
>  #ifdef CONFIG_DMA_ENGINE
> @@ -1412,6 +1413,8 @@ static int pl011_startup(struct uart_port *port)
>  		barrier();
>  
>  	cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
> +	if (uap->rts_state)
> +		cr |= UART011_CR_RTS;
>  	writew(cr, uap->port.membase + UART011_CR);

Note that this should preserve DTR as well.

-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:

  parent reply	other threads:[~2012-01-17 18:40 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-17 10:29 [PATCH] amba-pl011: do not disable RTS during shutdown Shreshtha Kumar SAHU
2012-01-17 10:29 ` Shreshtha Kumar SAHU
2012-01-17 15:41 ` Greg KH
2012-01-17 18:40 ` Russell King [this message]
2012-01-18  9:36   ` Shreshtha Kumar SAHU
2012-01-18  9:45   ` Shreshtha Kumar SAHU
2012-01-18 10:10     ` Russell King
2012-01-18 10:23       ` Shreshtha Kumar SAHU

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120117184047.GE22472@flint.arm.linux.org.uk \
    --to=rmk@arm.linux.org.uk \
    --cc=gregkh@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=shreshthakumar.sahu@stericsson.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.