* [PATCH 3/4] arm: Remove mach-tcc8k directory
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
2011-12-22 21:22 ` [PATCH 1/4] Remove Telechips ARM subarch from MAINTAINERS Hans J. Koch
2011-12-22 21:24 ` [PATCH 2/4] arm: Remove TCC subarch from Kconfig/Makefile Hans J. Koch
@ 2011-12-22 21:26 ` Hans J. Koch
2011-12-22 21:28 ` [PATCH 4/4] arm: Remove plat-tcc directory Hans J. Koch
3 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:26 UTC (permalink / raw)
To: linux-arm-kernel
The Telechips ARM architecture is being removed. This patch
deletes the arch/arm/mach-tcc8k/ folder.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
---
arch/arm/mach-tcc8k/Kconfig | 11 -
arch/arm/mach-tcc8k/Makefile | 9 -
arch/arm/mach-tcc8k/Makefile.boot | 3 -
arch/arm/mach-tcc8k/board-tcc8000-sdk.c | 81 -----
arch/arm/mach-tcc8k/clock.c | 580 -------------------------------
arch/arm/mach-tcc8k/common.h | 15 -
arch/arm/mach-tcc8k/devices.c | 239 -------------
arch/arm/mach-tcc8k/io.c | 62 ----
arch/arm/mach-tcc8k/irq.c | 111 ------
arch/arm/mach-tcc8k/time.c | 134 -------
10 files changed, 0 insertions(+), 1245 deletions(-)
delete mode 100644 arch/arm/mach-tcc8k/Kconfig
delete mode 100644 arch/arm/mach-tcc8k/Makefile
delete mode 100644 arch/arm/mach-tcc8k/Makefile.boot
delete mode 100644 arch/arm/mach-tcc8k/board-tcc8000-sdk.c
delete mode 100644 arch/arm/mach-tcc8k/clock.c
delete mode 100644 arch/arm/mach-tcc8k/common.h
delete mode 100644 arch/arm/mach-tcc8k/devices.c
delete mode 100644 arch/arm/mach-tcc8k/io.c
delete mode 100644 arch/arm/mach-tcc8k/irq.c
delete mode 100644 arch/arm/mach-tcc8k/time.c
diff --git a/arch/arm/mach-tcc8k/Kconfig b/arch/arm/mach-tcc8k/Kconfig
deleted file mode 100644
index ad86415..0000000
--- a/arch/arm/mach-tcc8k/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-if ARCH_TCC8K
-
-comment "TCC8000 systems:"
-
-config MACH_TCC8000_SDK
- bool "Telechips TCC8000-SDK development kit"
- default y
- help
- Support for the Telechips TCC8000-SDK board.
-
-endif
diff --git a/arch/arm/mach-tcc8k/Makefile b/arch/arm/mach-tcc8k/Makefile
deleted file mode 100644
index 9bacf31..0000000
--- a/arch/arm/mach-tcc8k/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for TCC8K boards and common files.
-#
-
-# Common support
-obj-y += clock.o irq.o time.o io.o devices.o
-
-# Board specific support
-obj-$(CONFIG_MACH_TCC8000_SDK) += board-tcc8000-sdk.o
diff --git a/arch/arm/mach-tcc8k/Makefile.boot b/arch/arm/mach-tcc8k/Makefile.boot
deleted file mode 100644
index 5e02d41..0000000
--- a/arch/arm/mach-tcc8k/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
- zreladdr-y += 0x20008000
-params_phys-y := 0x20000100
-initrd_phys-y := 0x20800000
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
deleted file mode 100644
index 777a5bb..0000000
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include <mach/clock.h>
-#include <mach/tcc-nand.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define XI_FREQUENCY 12000000
-#define XTI_FREQUENCY 32768
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND */
-static struct tcc_nand_platform_data tcc8k_sdk_nand_data = {
- .width = 1,
- .hw_ecc = 0,
-};
-#endif
-
-static void __init tcc8k_init(void)
-{
-#ifdef CONFIG_MTD_NAND_TCC
- tcc_nand_device.dev.platform_data = &tcc8k_sdk_nand_data;
- platform_device_register(&tcc_nand_device);
-#endif
-}
-
-static void __init tcc8k_init_timer(void)
-{
- tcc_clocks_init(XI_FREQUENCY, XTI_FREQUENCY);
-}
-
-static struct sys_timer tcc8k_timer = {
- .init = tcc8k_init_timer,
-};
-
-static void __init tcc8k_map_io(void)
-{
- tcc8k_map_common_io();
-
- /* set PLL0 clock to 96MHz, adapt UART0 divisor */
- __raw_writel(0x00026003, CKC_BASE + PLL0CFG_OFFS);
- __raw_writel(0x10000001, CKC_BASE + ACLKUART0_OFFS);
-
- /* set PLL1 clock to 192MHz */
- __raw_writel(0x00016003, CKC_BASE + PLL1CFG_OFFS);
-
- /* set PLL2 clock to 48MHz */
- __raw_writel(0x00036003, CKC_BASE + PLL2CFG_OFFS);
-
- /* with CPU freq higher than 150 MHz, need extra DTCM wait */
- __raw_writel(0x00000001, SCFG_BASE + DTCMWAIT_OFFS);
-
- /* PLL locking time as specified */
- udelay(300);
-}
-
-MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .atag_offset = 0x100,
- .map_io = tcc8k_map_io,
- .init_irq = tcc8k_init_irq,
- .init_machine = tcc8k_init,
- .timer = &tcc8k_timer,
-MACHINE_END
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
deleted file mode 100644
index e7cdae5..0000000
--- a/arch/arm/mach-tcc8k/clock.c
+++ /dev/null
@@ -1,580 +0,0 @@
-/*
- * Lowlevel clock handling for Telechips TCC8xxx SoCs
- *
- * Copyright (C) 2010 by Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/irqs.h>
-#include <mach/tcc8k-regs.h>
-
-#include "common.h"
-
-#define BCLKCTR0 (CKC_BASE + BCLKCTR0_OFFS)
-#define BCLKCTR1 (CKC_BASE + BCLKCTR1_OFFS)
-
-#define ACLKREF (CKC_BASE + ACLKREF_OFFS)
-#define ACLKUART0 (CKC_BASE + ACLKUART0_OFFS)
-#define ACLKUART1 (CKC_BASE + ACLKUART1_OFFS)
-#define ACLKUART2 (CKC_BASE + ACLKUART2_OFFS)
-#define ACLKUART3 (CKC_BASE + ACLKUART3_OFFS)
-#define ACLKUART4 (CKC_BASE + ACLKUART4_OFFS)
-#define ACLKI2C (CKC_BASE + ACLKI2C_OFFS)
-#define ACLKADC (CKC_BASE + ACLKADC_OFFS)
-#define ACLKUSBH (CKC_BASE + ACLKUSBH_OFFS)
-#define ACLKLCD (CKC_BASE + ACLKLCD_OFFS)
-#define ACLKSDH0 (CKC_BASE + ACLKSDH0_OFFS)
-#define ACLKSDH1 (CKC_BASE + ACLKSDH1_OFFS)
-#define ACLKSPI0 (CKC_BASE + ACLKSPI0_OFFS)
-#define ACLKSPI1 (CKC_BASE + ACLKSPI1_OFFS)
-#define ACLKSPDIF (CKC_BASE + ACLKSPDIF_OFFS)
-#define ACLKC3DEC (CKC_BASE + ACLKC3DEC_OFFS)
-#define ACLKCAN0 (CKC_BASE + ACLKCAN0_OFFS)
-#define ACLKCAN1 (CKC_BASE + ACLKCAN1_OFFS)
-#define ACLKGSB0 (CKC_BASE + ACLKGSB0_OFFS)
-#define ACLKGSB1 (CKC_BASE + ACLKGSB1_OFFS)
-#define ACLKGSB2 (CKC_BASE + ACLKGSB2_OFFS)
-#define ACLKGSB3 (CKC_BASE + ACLKGSB3_OFFS)
-#define ACLKTCT (CKC_BASE + ACLKTCT_OFFS)
-#define ACLKTCX (CKC_BASE + ACLKTCX_OFFS)
-#define ACLKTCZ (CKC_BASE + ACLKTCZ_OFFS)
-
-#define ACLK_MAX_DIV (0xfff + 1)
-
-/* Crystal frequencies */
-static unsigned long xi_rate, xti_rate;
-
-static void __iomem *pll_cfg_addr(int pll)
-{
- switch (pll) {
- case 0: return (CKC_BASE + PLL0CFG_OFFS);
- case 1: return (CKC_BASE + PLL1CFG_OFFS);
- case 2: return (CKC_BASE + PLL2CFG_OFFS);
- default:
- BUG();
- }
-}
-
-static int pll_enable(int pll, int enable)
-{
- u32 reg;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- if (enable)
- reg &= ~PLLxCFG_PD;
- else
- reg |= PLLxCFG_PD;
-
- __raw_writel(reg, addr);
- return 0;
-}
-
-static int xi_enable(int enable)
-{
- u32 reg;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (enable)
- reg |= CLKCTRL_XE;
- else
- reg &= ~CLKCTRL_XE;
-
- __raw_writel(reg, CKC_BASE + CLKCTRL_OFFS);
- return 0;
-}
-
-static int root_clk_enable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 1);
- case CLK_SRC_PLL1: return pll_enable(1, 1);
- case CLK_SRC_PLL2: return pll_enable(2, 1);
- case CLK_SRC_XI: return xi_enable(1);
- default:
- BUG();
- }
- return 0;
-}
-
-static int root_clk_disable(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return pll_enable(0, 0);
- case CLK_SRC_PLL1: return pll_enable(1, 0);
- case CLK_SRC_PLL2: return pll_enable(2, 0);
- case CLK_SRC_XI: return xi_enable(0);
- default:
- BUG();
- }
- return 0;
-}
-
-static int enable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT)
- return root_clk_enable(clk->root_id);
-
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg |= ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg |= 1 << clk->bclk_shift;
- __raw_writel(reg, clk->bclkctr);
- }
- return 0;
-}
-
-static void disable_clk(struct clk *clk)
-{
- u32 reg;
-
- if (clk->root_id != CLK_SRC_NOROOT) {
- root_clk_disable(clk->root_id);
- return;
- }
-
- if (clk->bclkctr) {
- reg = __raw_readl(clk->bclkctr);
- reg &= ~(1 << clk->bclk_shift);
- __raw_writel(reg, clk->bclkctr);
- }
- if (clk->aclkreg) {
- reg = __raw_readl(clk->aclkreg);
- reg &= ~ACLK_EN;
- __raw_writel(reg, clk->aclkreg);
- }
-}
-
-static unsigned long get_rate_pll(int pll)
-{
- u32 reg;
- unsigned long s, m, p;
- void __iomem *addr = pll_cfg_addr(pll);
-
- reg = __raw_readl(addr);
- s = (reg >> 16) & 0x07;
- m = (reg >> 8) & 0xff;
- p = reg & 0x3f;
-
- return (m * xi_rate) / (p * (1 << s));
-}
-
-static unsigned long get_rate_pll_div(int pll)
-{
- u32 reg;
- unsigned long div = 0;
- void __iomem *addr;
-
- switch (pll) {
- case 0:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P0E)
- div = (reg >> 24) & 0x3f;
- break;
- case 1:
- addr = CKC_BASE + CLKDIVC0_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC0_P1E)
- div = (reg >> 16) & 0x3f;
- break;
- case 2:
- addr = CKC_BASE + CLKDIVC1_OFFS;
- reg = __raw_readl(addr);
- if (reg & CLKDIVC1_P2E)
- div = reg & 0x3f;
- break;
- }
- return get_rate_pll(pll) / (div + 1);
-}
-
-static unsigned long get_rate_xi_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XE)
- div = (reg >> 8) & 0x3f;
-
- return xi_rate / (div + 1);
-}
-
-static unsigned long get_rate_xti_div(void)
-{
- unsigned long div = 0;
- u32 reg = __raw_readl(CKC_BASE + CLKDIVC0_OFFS);
-
- if (reg & CLKDIVC0_XTE)
- div = reg & 0x3f;
-
- return xti_rate / (div + 1);
-}
-
-static unsigned long root_clk_get_rate(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return get_rate_pll(0);
- case CLK_SRC_PLL1: return get_rate_pll(1);
- case CLK_SRC_PLL2: return get_rate_pll(2);
- case CLK_SRC_PLL0DIV: return get_rate_pll_div(0);
- case CLK_SRC_PLL1DIV: return get_rate_pll_div(1);
- case CLK_SRC_PLL2DIV: return get_rate_pll_div(2);
- case CLK_SRC_XI: return xi_rate;
- case CLK_SRC_XTI: return xti_rate;
- case CLK_SRC_XIDIV: return get_rate_xi_div();
- case CLK_SRC_XTIDIV: return get_rate_xti_div();
- default: return 0;
- }
-}
-
-static unsigned long aclk_get_rate(struct clk *clk)
-{
- u32 reg;
- unsigned long div;
- unsigned int src;
-
- reg = __raw_readl(clk->aclkreg);
- div = reg & 0x0fff;
- src = (reg >> ACLK_SEL_SHIFT) & CLK_SRC_MASK;
- return root_clk_get_rate(src) / (div + 1);
-}
-
-static unsigned long aclk_best_div(struct clk *clk, unsigned long rate)
-{
- unsigned long div, src, freq, r1, r2;
-
- if (!rate)
- return ACLK_MAX_DIV;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
- freq = root_clk_get_rate(src);
- div = freq / rate;
- if (!div)
- return 1;
- if (div >= ACLK_MAX_DIV)
- return ACLK_MAX_DIV;
- r1 = freq / div;
- r2 = freq / (div + 1);
- if ((rate - r2) < (r1 - rate))
- return div + 1;
-
- return div;
-}
-
-static unsigned long aclk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int src;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- return root_clk_get_rate(src) / aclk_best_div(clk, rate);
-}
-
-static int aclk_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
-
- reg = __raw_readl(clk->aclkreg) & ~ACLK_DIV_MASK;
- reg |= aclk_best_div(clk, rate) - 1;
- __raw_writel(reg, clk->aclkreg);
- return 0;
-}
-
-static unsigned long get_rate_sys(struct clk *clk)
-{
- unsigned int src;
-
- src = __raw_readl(CKC_BASE + CLKCTRL_OFFS) & CLK_SRC_MASK;
- return root_clk_get_rate(src);
-}
-
-static unsigned long get_rate_bus(struct clk *clk)
-{
- unsigned int reg, sdiv, bdiv, rate;
-
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- rate = get_rate_sys(clk);
- sdiv = (reg >> 20) & 3;
- if (sdiv)
- rate /= sdiv + 1;
- bdiv = (reg >> 4) & 0xff;
- if (bdiv)
- rate /= bdiv + 1;
- return rate;
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
- unsigned int reg, div, fsys, fbus;
-
- fbus = get_rate_bus(clk);
- reg = __raw_readl(CKC_BASE + CLKCTRL_OFFS);
- if (reg & (1 << 29))
- return fbus;
- fsys = get_rate_sys(clk);
- div = (reg >> 16) & 0x0f;
- return fbus + ((fsys - fbus) * (div + 1)) / 16;
-}
-
-static unsigned long get_rate_root(struct clk *clk)
-{
- return root_clk_get_rate(clk->root_id);
-}
-
-static int aclk_set_parent(struct clk *clock, struct clk *parent)
-{
- u32 reg;
-
- if (clock->parent == parent)
- return 0;
-
- clock->parent = parent;
-
- if (!parent)
- return 0;
-
- if (parent->root_id == CLK_SRC_NOROOT)
- return 0;
- reg = __raw_readl(clock->aclkreg);
- reg &= ~ACLK_SEL_MASK;
- reg |= (parent->root_id << ACLK_SEL_SHIFT) & ACLK_SEL_MASK;
- __raw_writel(reg, clock->aclkreg);
-
- return 0;
-}
-
-#define DEFINE_ROOT_CLOCK(name, ri, p) \
- static struct clk name = { \
- .root_id = ri, \
- .get_rate = get_rate_root, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-#define DEFINE_SPECIAL_CLOCK(name, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .get_rate = gr, \
- .parent = p, \
- };
-
-#define DEFINE_ACLOCK(name, bc, bs, ar) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .aclkreg = ar, \
- .get_rate = aclk_get_rate, \
- .set_rate = aclk_set_rate, \
- .round_rate = aclk_round_rate, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .set_parent = aclk_set_parent, \
- };
-
-#define DEFINE_BCLOCK(name, bc, bs, gr, p) \
- static struct clk name = { \
- .root_id = CLK_SRC_NOROOT, \
- .bclkctr = bc, \
- .bclk_shift = bs, \
- .get_rate = gr, \
- .enable = enable_clk, \
- .disable = disable_clk, \
- .parent = p, \
- };
-
-DEFINE_ROOT_CLOCK(xi, CLK_SRC_XI, NULL)
-DEFINE_ROOT_CLOCK(xti, CLK_SRC_XTI, NULL)
-DEFINE_ROOT_CLOCK(xidiv, CLK_SRC_XIDIV, &xi)
-DEFINE_ROOT_CLOCK(xtidiv, CLK_SRC_XTIDIV, &xti)
-DEFINE_ROOT_CLOCK(pll0, CLK_SRC_PLL0, &xi)
-DEFINE_ROOT_CLOCK(pll1, CLK_SRC_PLL1, &xi)
-DEFINE_ROOT_CLOCK(pll2, CLK_SRC_PLL2, &xi)
-DEFINE_ROOT_CLOCK(pll0div, CLK_SRC_PLL0DIV, &pll0)
-DEFINE_ROOT_CLOCK(pll1div, CLK_SRC_PLL1DIV, &pll1)
-DEFINE_ROOT_CLOCK(pll2div, CLK_SRC_PLL2DIV, &pll2)
-
-/* The following 3 clocks are special and are initialized explicitly later */
-DEFINE_SPECIAL_CLOCK(sys, get_rate_sys, NULL)
-DEFINE_SPECIAL_CLOCK(bus, get_rate_bus, &sys)
-DEFINE_SPECIAL_CLOCK(cpu, get_rate_cpu, &sys)
-
-DEFINE_ACLOCK(tct, NULL, 0, ACLKTCT)
-DEFINE_ACLOCK(tcx, NULL, 0, ACLKTCX)
-DEFINE_ACLOCK(tcz, NULL, 0, ACLKTCZ)
-DEFINE_ACLOCK(ref, NULL, 0, ACLKREF)
-DEFINE_ACLOCK(uart0, BCLKCTR0, 5, ACLKUART0)
-DEFINE_ACLOCK(uart1, BCLKCTR0, 23, ACLKUART1)
-DEFINE_ACLOCK(uart2, BCLKCTR0, 6, ACLKUART2)
-DEFINE_ACLOCK(uart3, BCLKCTR0, 8, ACLKUART3)
-DEFINE_ACLOCK(uart4, BCLKCTR1, 6, ACLKUART4)
-DEFINE_ACLOCK(i2c, BCLKCTR0, 7, ACLKI2C)
-DEFINE_ACLOCK(adc, BCLKCTR0, 10, ACLKADC)
-DEFINE_ACLOCK(usbh0, BCLKCTR0, 11, ACLKUSBH)
-DEFINE_ACLOCK(lcd, BCLKCTR0, 13, ACLKLCD)
-DEFINE_ACLOCK(sd0, BCLKCTR0, 17, ACLKSDH0)
-DEFINE_ACLOCK(sd1, BCLKCTR1, 5, ACLKSDH1)
-DEFINE_ACLOCK(spi0, BCLKCTR0, 24, ACLKSPI0)
-DEFINE_ACLOCK(spi1, BCLKCTR0, 30, ACLKSPI1)
-DEFINE_ACLOCK(spdif, BCLKCTR1, 2, ACLKSPDIF)
-DEFINE_ACLOCK(c3dec, BCLKCTR1, 9, ACLKC3DEC)
-DEFINE_ACLOCK(can0, BCLKCTR1, 10, ACLKCAN0)
-DEFINE_ACLOCK(can1, BCLKCTR1, 11, ACLKCAN1)
-DEFINE_ACLOCK(gsb0, BCLKCTR1, 13, ACLKGSB0)
-DEFINE_ACLOCK(gsb1, BCLKCTR1, 14, ACLKGSB1)
-DEFINE_ACLOCK(gsb2, BCLKCTR1, 15, ACLKGSB2)
-DEFINE_ACLOCK(gsb3, BCLKCTR1, 16, ACLKGSB3)
-DEFINE_ACLOCK(usbh1, BCLKCTR1, 20, ACLKUSBH)
-
-DEFINE_BCLOCK(dai0, BCLKCTR0, 0, NULL, NULL)
-DEFINE_BCLOCK(pic, BCLKCTR0, 1, NULL, NULL)
-DEFINE_BCLOCK(tc, BCLKCTR0, 2, NULL, NULL)
-DEFINE_BCLOCK(gpio, BCLKCTR0, 3, NULL, NULL)
-DEFINE_BCLOCK(usbd, BCLKCTR0, 4, NULL, NULL)
-DEFINE_BCLOCK(ecc, BCLKCTR0, 9, NULL, NULL)
-DEFINE_BCLOCK(gdma0, BCLKCTR0, 12, NULL, NULL)
-DEFINE_BCLOCK(rtc, BCLKCTR0, 15, NULL, NULL)
-DEFINE_BCLOCK(nfc, BCLKCTR0, 16, NULL, NULL)
-DEFINE_BCLOCK(g2d, BCLKCTR0, 18, NULL, NULL)
-DEFINE_BCLOCK(gdma1, BCLKCTR0, 22, NULL, NULL)
-DEFINE_BCLOCK(mscl, BCLKCTR0, 25, NULL, NULL)
-DEFINE_BCLOCK(bdma, BCLKCTR1, 0, NULL, NULL)
-DEFINE_BCLOCK(adma0, BCLKCTR1, 1, NULL, NULL)
-DEFINE_BCLOCK(scfg, BCLKCTR1, 3, NULL, NULL)
-DEFINE_BCLOCK(cid, BCLKCTR1, 4, NULL, NULL)
-DEFINE_BCLOCK(dai1, BCLKCTR1, 7, NULL, NULL)
-DEFINE_BCLOCK(adma1, BCLKCTR1, 8, NULL, NULL)
-DEFINE_BCLOCK(gps, BCLKCTR1, 12, NULL, NULL)
-DEFINE_BCLOCK(gdma2, BCLKCTR1, 17, NULL, NULL)
-DEFINE_BCLOCK(gdma3, BCLKCTR1, 18, NULL, NULL)
-DEFINE_BCLOCK(ddrc, BCLKCTR1, 19, NULL, NULL)
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "bus", bus)
- _REGISTER_CLOCK(NULL, "cpu", cpu)
- _REGISTER_CLOCK(NULL, "tct", tct)
- _REGISTER_CLOCK(NULL, "tcx", tcx)
- _REGISTER_CLOCK(NULL, "tcz", tcz)
- _REGISTER_CLOCK(NULL, "ref", ref)
- _REGISTER_CLOCK(NULL, "dai0", dai0)
- _REGISTER_CLOCK(NULL, "pic", pic)
- _REGISTER_CLOCK(NULL, "tc", tc)
- _REGISTER_CLOCK(NULL, "gpio", gpio)
- _REGISTER_CLOCK(NULL, "usbd", usbd)
- _REGISTER_CLOCK("tcc-uart.0", NULL, uart0)
- _REGISTER_CLOCK("tcc-uart.2", NULL, uart2)
- _REGISTER_CLOCK("tcc-i2c", NULL, i2c)
- _REGISTER_CLOCK("tcc-uart.3", NULL, uart3)
- _REGISTER_CLOCK(NULL, "ecc", ecc)
- _REGISTER_CLOCK(NULL, "adc", adc)
- _REGISTER_CLOCK("tcc-usbh.0", "usb", usbh0)
- _REGISTER_CLOCK(NULL, "gdma0", gdma0)
- _REGISTER_CLOCK(NULL, "lcd", lcd)
- _REGISTER_CLOCK(NULL, "rtc", rtc)
- _REGISTER_CLOCK(NULL, "nfc", nfc)
- _REGISTER_CLOCK("tcc-mmc.0", NULL, sd0)
- _REGISTER_CLOCK(NULL, "g2d", g2d)
- _REGISTER_CLOCK(NULL, "gdma1", gdma1)
- _REGISTER_CLOCK("tcc-uart.1", NULL, uart1)
- _REGISTER_CLOCK("tcc-spi.0", NULL, spi0)
- _REGISTER_CLOCK(NULL, "mscl", mscl)
- _REGISTER_CLOCK("tcc-spi.1", NULL, spi1)
- _REGISTER_CLOCK(NULL, "bdma", bdma)
- _REGISTER_CLOCK(NULL, "adma0", adma0)
- _REGISTER_CLOCK(NULL, "spdif", spdif)
- _REGISTER_CLOCK(NULL, "scfg", scfg)
- _REGISTER_CLOCK(NULL, "cid", cid)
- _REGISTER_CLOCK("tcc-mmc.1", NULL, sd1)
- _REGISTER_CLOCK("tcc-uart.4", NULL, uart4)
- _REGISTER_CLOCK(NULL, "dai1", dai1)
- _REGISTER_CLOCK(NULL, "adma1", adma1)
- _REGISTER_CLOCK(NULL, "c3dec", c3dec)
- _REGISTER_CLOCK("tcc-can.0", NULL, can0)
- _REGISTER_CLOCK("tcc-can.1", NULL, can1)
- _REGISTER_CLOCK(NULL, "gps", gps)
- _REGISTER_CLOCK("tcc-gsb.0", NULL, gsb0)
- _REGISTER_CLOCK("tcc-gsb.1", NULL, gsb1)
- _REGISTER_CLOCK("tcc-gsb.2", NULL, gsb2)
- _REGISTER_CLOCK("tcc-gsb.3", NULL, gsb3)
- _REGISTER_CLOCK(NULL, "gdma2", gdma2)
- _REGISTER_CLOCK(NULL, "gdma3", gdma3)
- _REGISTER_CLOCK(NULL, "ddrc", ddrc)
- _REGISTER_CLOCK("tcc-usbh.1", "usb", usbh1)
-};
-
-static struct clk *root_clk_by_index(enum root_clks src)
-{
- switch (src) {
- case CLK_SRC_PLL0: return &pll0;
- case CLK_SRC_PLL1: return &pll1;
- case CLK_SRC_PLL2: return &pll2;
- case CLK_SRC_PLL0DIV: return &pll0div;
- case CLK_SRC_PLL1DIV: return &pll1div;
- case CLK_SRC_PLL2DIV: return &pll2div;
- case CLK_SRC_XI: return ξ
- case CLK_SRC_XTI: return &xti;
- case CLK_SRC_XIDIV: return &xidiv;
- case CLK_SRC_XTIDIV: return &xtidiv;
- default: return NULL;
- }
-}
-
-static void find_aclk_parent(struct clk *clk)
-{
- unsigned int src;
- struct clk *clock;
-
- if (!clk->aclkreg)
- return;
-
- src = __raw_readl(clk->aclkreg) >> ACLK_SEL_SHIFT;
- src &= CLK_SRC_MASK;
-
- clock = root_clk_by_index(src);
- if (!clock)
- return;
-
- clk->parent = clock;
- clk->set_parent = aclk_set_parent;
-}
-
-void __init tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq)
-{
- int i;
-
- xi_rate = xi_freq;
- xti_rate = xti_freq;
-
- /* fixup parents and add the clock */
- for (i = 0; i < ARRAY_SIZE(lookups); i++) {
- find_aclk_parent(lookups[i].clk);
- clkdev_add(&lookups[i]);
- }
- tcc8k_timer_init(&tcz, (void __iomem *)TIMER_BASE, INT_TC32);
-}
diff --git a/arch/arm/mach-tcc8k/common.h b/arch/arm/mach-tcc8k/common.h
deleted file mode 100644
index 705690a..0000000
--- a/arch/arm/mach-tcc8k/common.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef MACH_TCC8K_COMMON_H
-#define MACH_TCC8K_COMMON_H
-
-#include <linux/platform_device.h>
-
-extern struct platform_device tcc_nand_device;
-
-struct clk;
-
-extern void tcc_clocks_init(unsigned long xi_freq, unsigned long xti_freq);
-extern void tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq);
-extern void tcc8k_init_irq(void);
-extern void tcc8k_map_common_io(void);
-
-#endif
diff --git a/arch/arm/mach-tcc8k/devices.c b/arch/arm/mach-tcc8k/devices.c
deleted file mode 100644
index 6722ad7..0000000
--- a/arch/arm/mach-tcc8k/devices.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/devices.c
- *
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of GPL v2.
- *
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static u64 tcc8k_dmamask = DMA_BIT_MASK(32);
-
-#ifdef CONFIG_MTD_NAND_TCC
-/* NAND controller */
-static struct resource tcc_nand_resources[] = {
- {
- .start = (resource_size_t)NFC_BASE,
- .end = (resource_size_t)NFC_BASE + 0x7f,
- .flags = IORESOURCE_MEM,
- }, {
- .start = INT_NFC,
- .end = INT_NFC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc_nand_device = {
- .name = "tcc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc_nand_resources),
- .resource = tcc_nand_resources,
-};
-#endif
-
-#ifdef CONFIG_MMC_TCC8K
-/* MMC controller */
-static struct resource tcc8k_mmc0_resource[] = {
- {
- .start = INT_SD0,
- .end = INT_SD0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource tcc8k_mmc1_resource[] = {
- {
- .start = INT_SD1,
- .end = INT_SD1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device tcc8k_mmc0_device = {
- .name = "tcc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(tcc8k_mmc0_resource),
- .resource = tcc8k_mmc0_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-struct platform_device tcc8k_mmc1_device = {
- .name = "tcc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(tcc8k_mmc1_resource),
- .resource = tcc8k_mmc1_resource,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-static inline void tcc8k_init_mmc(void)
-{
- u32 reg = __raw_readl(GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- reg |= GPIOPS_FS1_SDH0_BITS | GPIOPS_FS1_SDH1_BITS;
- __raw_writel(reg, GPIOPS_BASE + GPIOPS_FS1_OFFS);
-
- platform_device_register(&tcc8k_mmc0_device);
- platform_device_register(&tcc8k_mmc1_device);
-}
-#else
-static inline void tcc8k_init_mmc(void) { }
-#endif
-
-#ifdef CONFIG_USB_OHCI_HCD
-static int tcc8k_ohci_init(struct device *dev)
-{
- u32 reg;
-
- /* Use GPIO PK19 as VBUS control output */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS0_OFFS);
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_FS1_OFFS);
- reg &= ~(1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_FS1_OFFS);
-
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DOE_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DOE_OFFS);
- /* Turn on VBUS */
- reg = __raw_readl(GPIOPK_BASE + GPIOPK_DAT_OFFS);
- reg |= (1 << 19);
- __raw_writel(reg, GPIOPK_BASE + GPIOPK_DAT_OFFS);
-
- return 0;
-}
-
-static struct resource tcc8k_ohci0_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH0_BASE,
- .end = (resource_size_t)USBH0_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH0,
- .end = INT_USBH0,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct resource tcc8k_ohci1_resources[] = {
- [0] = {
- .start = (resource_size_t)USBH1_BASE,
- .end = (resource_size_t)USBH1_BASE + 0x5c,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_USBH1,
- .end = INT_USBH1,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct tccohci_platform_data tcc8k_ohci0_platform_data = {
- .controller = 0,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct tccohci_platform_data tcc8k_ohci1_platform_data = {
- .controller = 1,
- .port_mode = PMM_PERPORT_MODE,
- .init = tcc8k_ohci_init,
-};
-
-static struct platform_device ohci0_device = {
- .name = "tcc-ohci",
- .id = 0,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci0_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci0_resources),
- .resource = tcc8k_ohci0_resources,
-};
-
-static struct platform_device ohci1_device = {
- .name = "tcc-ohci",
- .id = 1,
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &tcc8k_ohci1_platform_data,
- },
- .num_resources = ARRAY_SIZE(tcc8k_ohci1_resources),
- .resource = tcc8k_ohci1_resources,
-};
-
-static void __init tcc8k_init_usbhost(void)
-{
- platform_device_register(&ohci0_device);
- platform_device_register(&ohci1_device);
-}
-#else
-static void __init tcc8k_init_usbhost(void) { }
-#endif
-
-/* USB device controller*/
-#ifdef CONFIG_USB_GADGET_TCC8K
-static struct resource udc_resources[] = {
- [0] = {
- .start = INT_USBD,
- .end = INT_USBD,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = INT_UDMA,
- .end = INT_UDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device tcc8k_udc_device = {
- .name = "tcc-udc",
- .id = 0,
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
- .dev = {
- .dma_mask = &tcc8k_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static void __init tcc8k_init_usb_gadget(void)
-{
- platform_device_register(&tcc8k_udc_device);
-}
-#else
-static void __init tcc8k_init_usb_gadget(void) { }
-#endif /* CONFIG_USB_GADGET_TCC83X */
-
-static int __init tcc8k_init_devices(void)
-{
- tcc8k_init_mmc();
- tcc8k_init_usbhost();
- tcc8k_init_usb_gadget();
- return 0;
-}
-
-arch_initcall(tcc8k_init_devices);
diff --git a/arch/arm/mach-tcc8k/io.c b/arch/arm/mach-tcc8k/io.c
deleted file mode 100644
index 9b39d7f..0000000
--- a/arch/arm/mach-tcc8k/io.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * linux/arch/arm/mach-tcc8k/io.c
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * derived from TCC83xx io.c
- * Copyright (C) Telechips, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/tcc8k-regs.h>
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc tcc8k_io_desc[] __initdata = {
- {
- .virtual = (unsigned long)CS1_BASE_VIRT,
- .pfn = __phys_to_pfn(CS1_BASE),
- .length = CS1_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)AHB_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(AHB_PERI_BASE),
- .length = AHB_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB0_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB0_PERI_BASE),
- .length = APB0_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)APB1_PERI_BASE_VIRT,
- .pfn = __phys_to_pfn(APB1_PERI_BASE),
- .length = APB1_PERI_SIZE,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)EXT_MEM_CTRL_BASE_VIRT,
- .pfn = __phys_to_pfn(EXT_MEM_CTRL_BASE),
- .length = EXT_MEM_CTRL_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/*
- * Maps common IO regions for tcc8k.
- *
- */
-void __init tcc8k_map_common_io(void)
-{
- iotable_init(tcc8k_io_desc, ARRAY_SIZE(tcc8k_io_desc));
-}
diff --git a/arch/arm/mach-tcc8k/irq.c b/arch/arm/mach-tcc8k/irq.c
deleted file mode 100644
index 209fa5c..0000000
--- a/arch/arm/mach-tcc8k/irq.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * Copyright (C) Telechips, Inc.
- * Copyright (C) 2009-2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU GPL version 2.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-/* Disable IRQ */
-static void tcc8000_mask_ack_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_mask_ack_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-static void tcc8000_mask_irq0(struct irq_data *d)
-{
- PIC0_IEN &= ~(1 << d->irq);
-}
-
-static void tcc8000_mask_irq1(struct irq_data *d)
-{
- PIC1_IEN &= ~(1 << (d->irq - 32));
-}
-
-static void tcc8000_ack_irq0(struct irq_data *d)
-{
- PIC0_CREQ |= (1 << d->irq);
-}
-
-static void tcc8000_ack_irq1(struct irq_data *d)
-{
- PIC1_CREQ |= (1 << (d->irq - 32));
-}
-
-/* Enable IRQ */
-static void tcc8000_unmask_irq0(struct irq_data *d)
-{
- PIC0_IEN |= (1 << d->irq);
- PIC0_INTOEN |= (1 << d->irq);
-}
-
-static void tcc8000_unmask_irq1(struct irq_data *d)
-{
- PIC1_IEN |= (1 << (d->irq - 32));
- PIC1_INTOEN |= (1 << (d->irq - 32));
-}
-
-static struct irq_chip tcc8000_irq_chip0 = {
- .name = "tcc_irq0",
- .irq_mask = tcc8000_mask_irq0,
- .irq_ack = tcc8000_ack_irq0,
- .irq_mask_ack = tcc8000_mask_ack_irq0,
- .irq_unmask = tcc8000_unmask_irq0,
-};
-
-static struct irq_chip tcc8000_irq_chip1 = {
- .name = "tcc_irq1",
- .irq_mask = tcc8000_mask_irq1,
- .irq_ack = tcc8000_ack_irq1,
- .irq_mask_ack = tcc8000_mask_ack_irq1,
- .irq_unmask = tcc8000_unmask_irq1,
-};
-
-void __init tcc8k_init_irq(void)
-{
- int irqno;
-
- /* Mask and clear all interrupts */
- PIC0_IEN = 0x00000000;
- PIC0_CREQ = 0xffffffff;
- PIC1_IEN = 0x00000000;
- PIC1_CREQ = 0xffffffff;
-
- PIC0_MEN0 = 0x00000003;
- PIC1_MEN1 = 0x00000003;
- PIC1_MEN = 0x00000003;
-
- /* let all IRQs be level triggered */
- PIC0_TMODE = 0xffffffff;
- PIC1_TMODE = 0xffffffff;
- /* all IRQs are IRQs (not FIQs) */
- PIC0_IRQSEL = 0xffffffff;
- PIC1_IRQSEL = 0xffffffff;
-
- for (irqno = 0; irqno < NR_IRQS; irqno++) {
- if (irqno < 32)
- irq_set_chip(irqno, &tcc8000_irq_chip0);
- else
- irq_set_chip(irqno, &tcc8000_irq_chip1);
- irq_set_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-}
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
deleted file mode 100644
index a96babe..0000000
--- a/arch/arm/mach-tcc8k/time.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * TCC8000 system timer setup
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL version 2.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/clockchips.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-
-#include <asm/mach/time.h>
-
-#include <mach/tcc8k-regs.h>
-#include <mach/irqs.h>
-
-#include "common.h"
-
-static void __iomem *timer_base;
-
-static int tcc_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long reg = __raw_readl(timer_base + TC32MCNT_OFFS);
-
- __raw_writel(reg + evt, timer_base + TC32CMP0_OFFS);
- return 0;
-}
-
-static void tcc_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- unsigned long tc32irq;
-
- switch (mode) {
- case CLOCK_EVT_MODE_ONESHOT:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq |= TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- tc32irq = __raw_readl(timer_base + TC32IRQ_OFFS);
- tc32irq &= ~TC32IRQ_IRQEN0;
- __raw_writel(tc32irq, timer_base + TC32IRQ_OFFS);
- break;
- case CLOCK_EVT_MODE_PERIODIC:
- case CLOCK_EVT_MODE_RESUME:
- break;
- }
-}
-
-static irqreturn_t tcc8k_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* Acknowledge TC32 interrupt by reading TC32IRQ */
- __raw_readl(timer_base + TC32IRQ_OFFS);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static struct clock_event_device clockevent_tcc = {
- .name = "tcc_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = tcc_set_mode,
- .set_next_event = tcc_set_next_event,
- .rating = 200,
-};
-
-static struct irqaction tcc8k_timer_irq = {
- .name = "TC32_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER,
- .handler = tcc8k_timer_interrupt,
- .dev_id = &clockevent_tcc,
-};
-
-static int __init tcc_clockevent_init(struct clk *clock)
-{
- unsigned int c = clk_get_rate(clock);
-
- clocksource_mmio_init(timer_base + TC32MCNT_OFFS, "tcc_tc32", c,
- 200, 32, clocksource_mmio_readl_up);
-
- clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
- clockevent_tcc.shift);
- clockevent_tcc.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_tcc);
- clockevent_tcc.min_delta_ns =
- clockevent_delta2ns(0xff, &clockevent_tcc);
-
- clockevent_tcc.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_tcc);
-
- return 0;
-}
-
-void __init tcc8k_timer_init(struct clk *clock, void __iomem *base, int irq)
-{
- u32 reg;
-
- timer_base = base;
- tcc8k_timer_irq.irq = irq;
-
- /* Enable clocks */
- clk_enable(clock);
-
- /* Initialize 32-bit timer */
- reg = __raw_readl(timer_base + TC32EN_OFFS);
- reg &= ~TC32EN_ENABLE; /* Disable timer */
- __raw_writel(reg, timer_base + TC32EN_OFFS);
- /* Free running timer, counting from 0 to 0xffffffff */
- __raw_writel(0, timer_base + TC32EN_OFFS);
- __raw_writel(0, timer_base + TC32LDV_OFFS);
- reg = __raw_readl(timer_base + TC32IRQ_OFFS);
- reg |= TC32IRQ_IRQEN0; /* irq at match with CMP0 */
- __raw_writel(reg, timer_base + TC32IRQ_OFFS);
-
- __raw_writel(TC32EN_ENABLE, timer_base + TC32EN_OFFS);
-
- tcc_clockevent_init(clock);
- setup_irq(irq, &tcc8k_timer_irq);
-}
--
1.7.6.3
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 4/4] arm: Remove plat-tcc directory
2011-12-22 21:19 [PATCH 0/4] arm: Remove Telechips subarchitecture Hans J. Koch
` (2 preceding siblings ...)
2011-12-22 21:26 ` [PATCH 3/4] arm: Remove mach-tcc8k directory Hans J. Koch
@ 2011-12-22 21:28 ` Hans J. Koch
3 siblings, 0 replies; 13+ messages in thread
From: Hans J. Koch @ 2011-12-22 21:28 UTC (permalink / raw)
To: linux-arm-kernel
The Telechips ARM architecture is being removed. This patch
deletes the arch/arm/plat-tcc/ folder.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Harry Sievers <hsievers@csselectronic.com>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
---
arch/arm/plat-tcc/Kconfig | 20 -
arch/arm/plat-tcc/Makefile | 3 -
arch/arm/plat-tcc/clock.c | 179 ------
arch/arm/plat-tcc/include/mach/clock.h | 48 --
arch/arm/plat-tcc/include/mach/debug-macro.S | 32 -
arch/arm/plat-tcc/include/mach/entry-macro.S | 68 ---
arch/arm/plat-tcc/include/mach/hardware.h | 43 --
arch/arm/plat-tcc/include/mach/io.h | 23 -
arch/arm/plat-tcc/include/mach/irqs.h | 83 ---
arch/arm/plat-tcc/include/mach/system.h | 31 -
arch/arm/plat-tcc/include/mach/tcc8k-regs.h | 807 --------------------------
arch/arm/plat-tcc/include/mach/timex.h | 5 -
arch/arm/plat-tcc/include/mach/uncompress.h | 34 --
arch/arm/plat-tcc/include/mach/vmalloc.h | 10 -
arch/arm/plat-tcc/system.c | 25 -
15 files changed, 0 insertions(+), 1411 deletions(-)
delete mode 100644 arch/arm/plat-tcc/Kconfig
delete mode 100644 arch/arm/plat-tcc/Makefile
delete mode 100644 arch/arm/plat-tcc/clock.c
delete mode 100644 arch/arm/plat-tcc/include/mach/clock.h
delete mode 100644 arch/arm/plat-tcc/include/mach/debug-macro.S
delete mode 100644 arch/arm/plat-tcc/include/mach/entry-macro.S
delete mode 100644 arch/arm/plat-tcc/include/mach/hardware.h
delete mode 100644 arch/arm/plat-tcc/include/mach/io.h
delete mode 100644 arch/arm/plat-tcc/include/mach/irqs.h
delete mode 100644 arch/arm/plat-tcc/include/mach/system.h
delete mode 100644 arch/arm/plat-tcc/include/mach/tcc8k-regs.h
delete mode 100644 arch/arm/plat-tcc/include/mach/timex.h
delete mode 100644 arch/arm/plat-tcc/include/mach/uncompress.h
delete mode 100644 arch/arm/plat-tcc/include/mach/vmalloc.h
delete mode 100644 arch/arm/plat-tcc/system.c
diff --git a/arch/arm/plat-tcc/Kconfig b/arch/arm/plat-tcc/Kconfig
deleted file mode 100644
index 1bf4995..0000000
--- a/arch/arm/plat-tcc/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-if ARCH_TCC_926
-
-menu "Telechips ARM926-based CPUs"
-
-choice
- prompt "Telechips CPU type:"
- default ARCH_TCC8K
-
-config ARCH_TCC8K
- bool TCC8000
- select USB_ARCH_HAS_OHCI
- help
- Support for Telechips TCC8000 systems
-
-endchoice
-
-source "arch/arm/mach-tcc8k/Kconfig"
-
-endmenu
-endif
diff --git a/arch/arm/plat-tcc/Makefile b/arch/arm/plat-tcc/Makefile
deleted file mode 100644
index eceabc8..0000000
--- a/arch/arm/plat-tcc/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# "Telechips Platform Common Modules"
-
-obj-y := clock.o system.o
diff --git a/arch/arm/plat-tcc/clock.c b/arch/arm/plat-tcc/clock.c
deleted file mode 100644
index f3ced10..0000000
--- a/arch/arm/plat-tcc/clock.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Clock framework for Telechips SoCs
- * Based on arch/arm/plat-mxc/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel at pengutronix.de
- * Copyright 2010 Hans J. Koch, hjk at linutronix.de
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
- BUG_ON(clk->refcount == 0);
-
- if (!(--clk->refcount) && clk->disable) {
- /* Unconditionally disable the clock in hardware */
- clk->disable(clk);
- /* recursively disable parents */
- if (clk->parent)
- __clk_disable(clk->parent);
- }
-}
-
-static int __clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (clk->refcount++ == 0 && clk->enable) {
- if (clk->parent)
- ret = __clk_enable(clk->parent);
- if (ret)
- return ret;
- else
- return clk->enable(clk);
- }
-
- return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
- int ret = 0;
-
- if (!clk)
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = __clk_enable(clk);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
- if (!clk)
- return;
-
- mutex_lock(&clocks_mutex);
- __clk_disable(clk);
- mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL_GPL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (!clk)
- return 0UL;
-
- if (clk->get_rate)
- return clk->get_rate(clk);
-
- return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL_GPL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!clk)
- return 0;
- if (!clk->round_rate)
- return 0;
-
- return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL_GPL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_rate || !rate)
- return ret;
-
- mutex_lock(&clocks_mutex);
- ret = clk->set_rate(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk *old;
- int ret = -EINVAL;
-
- if (!clk)
- return ret;
- if (!clk->set_parent || !parent)
- return ret;
-
- mutex_lock(&clocks_mutex);
- old = clk->parent;
- if (clk->refcount)
- __clk_enable(parent);
- ret = clk->set_parent(clk, parent);
- if (ret)
- old = parent;
- if (clk->refcount)
- __clk_disable(old);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
- if (!clk)
- return NULL;
-
- return clk->parent;
-}
-EXPORT_SYMBOL_GPL(clk_get_parent);
diff --git a/arch/arm/plat-tcc/include/mach/clock.h b/arch/arm/plat-tcc/include/mach/clock.h
deleted file mode 100644
index a12f58a..0000000
--- a/arch/arm/plat-tcc/include/mach/clock.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Low level clock header file for Telechips TCC architecture
- * (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the GPL v2.
- */
-
-#ifndef __ASM_ARCH_TCC_CLOCK_H__
-#define __ASM_ARCH_TCC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-
-struct clk {
- struct clk *parent;
- /* id number of a root clock, 0 for normal clocks */
- int root_id;
- /* Reference count of clock enable/disable */
- int refcount;
- /* Address of associated BCLKCTRx register. Must be set. */
- void __iomem *bclkctr;
- /* Bit position for BCLKCTRx. Must be set. */
- int bclk_shift;
- /* Address of ACLKxxx register, if any. */
- void __iomem *aclkreg;
- /* get the current clock rate (always a fresh value) */
- unsigned long (*get_rate) (struct clk *);
- /* Function ptr to set the clock to a new rate. The rate must match a
- supported rate returned from round_rate. Leave blank if clock is not
- programmable */
- int (*set_rate) (struct clk *, unsigned long);
- /* Function ptr to round the requested clock rate to the nearest
- supported rate that is less than or equal to the requested rate. */
- unsigned long (*round_rate) (struct clk *, unsigned long);
- /* Function ptr to enable the clock. Leave blank if clock can not
- be gated. */
- int (*enable) (struct clk *);
- /* Function ptr to disable the clock. Leave blank if clock can not
- be gated. */
- void (*disable) (struct clk *);
- /* Function ptr to set the parent clock of the clock. */
- int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
deleted file mode 100644
index cf17d04..0000000
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
- .macro addruart, rp, rv, tmp
- moveq \rp, #0x90000000 @ physical base address
- movne \rv, #0xF1000000 @ virtual base
- orr \rp, \rp, #0x00007000 @ UART0
- orr \rv, \rv, #0x00007000 @ UART0
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #0x44]
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1001:
- ldr \rd, [\rx, #0x14]
- tst \rd, #0x20
-
- beq 1001b
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/entry-macro.S b/arch/arm/plat-tcc/include/mach/entry-macro.S
deleted file mode 100644
index 748f401..0000000
--- a/arch/arm/plat-tcc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * include/asm-arm/arch-tcc83x/entry-macro.S
- *
- * Author : <linux@telechips.com>
- * Created: June 10, 2008
- * Description: Low-level IRQ helper macros for Telechips-based platforms
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \base, =0xF2003000 @ base address of PIC registers
-
- @@ read MREQ register of PIC0
-
- mov \irqnr, #0
- ldr \irqstat, [\base, #0x00000014 ] @ lower 32 interrupts
- cmp \irqstat, #0
- bne 1001f
-
- @@ read MREQ register of PIC1
-
- ldr \irqstat, [\base, #0x00000094] @ upper 32 interrupts
- cmp \irqstat, #0
- beq 1002f
- mov \irqnr, #0x20
-
-1001:
- movs \tmp, \irqstat, lsl #16
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
-
- movs \tmp, \irqstat, lsl #8
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #8
-
- movs \tmp, \irqstat, lsl #4
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #4
-
- movs \tmp, \irqstat, lsl #2
- movne \irqstat, \tmp
- addeq \irqnr, \irqnr, #2
-
- movs \tmp, \irqstat, lsl #1
- addeq \irqnr, \irqnr, #1
- orrs \base, \base, #1
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
diff --git a/arch/arm/plat-tcc/include/mach/hardware.h b/arch/arm/plat-tcc/include/mach/hardware.h
deleted file mode 100644
index e70d126..0000000
--- a/arch/arm/plat-tcc/include/mach/hardware.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
- * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
- * and Dirk Behme <dirk.behme@de.bosch.com>
- * Rewritten by: <linux@telechips.com>
- * Description: Hardware definitions for TCC8300 processors and boards
- *
- * Copyright (C) 2001 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- *
- * Modifications for mainline (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Pulic License version 2.
- */
-
-#ifndef __ASM_ARCH_TCC_HARDWARE_H
-#define __ASM_ARCH_TCC_HARDWARE_H
-
-#include <asm/sizes.h>
-#ifndef __ASSEMBLER__
-#include <asm/types.h>
-#endif
-#include <mach/io.h>
-
-/*
- * ----------------------------------------------------------------------------
- * Clocks
- * ----------------------------------------------------------------------------
- */
-#define CLKGEN_REG_BASE 0xfffece00
-#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
-#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
-#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
-#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
-#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
-#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
-#define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
-#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
-
-/* DPLL control registers */
-#define DPLL_CTL 0xfffecf00
-
-#endif /* __ASM_ARCH_TCC_HARDWARE_H */
diff --git a/arch/arm/plat-tcc/include/mach/io.h b/arch/arm/plat-tcc/include/mach/io.h
deleted file mode 100644
index 3e911d3..0000000
--- a/arch/arm/plat-tcc/include/mach/io.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * IO definitions for TCC8000 processors and boards
- *
- * Copyright (C) 1997-1999 Russell King
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GNU Public License version 2.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/irqs.h b/arch/arm/plat-tcc/include/mach/irqs.h
deleted file mode 100644
index da86389..0000000
--- a/arch/arm/plat-tcc/include/mach/irqs.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * IRQ definitions for TCC8xxx
- *
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_TCC_IRQS_H
-#define __ASM_ARCH_TCC_IRQS_H
-
-#define NR_IRQS 64
-
-/* PIC0 interrupts */
-#define INT_ADMA1 0
-#define INT_BDMA 1
-#define INT_ADMA0 2
-#define INT_GDMA1 3
-#define INT_I2S0RX 4
-#define INT_I2S0TX 5
-#define INT_TC 6
-#define INT_UART0 7
-#define INT_USBD 8
-#define INT_SPI0TX 9
-#define INT_UDMA 10
-#define INT_LIRQ 11
-#define INT_GDMA2 12
-#define INT_GDMA0 13
-#define INT_TC32 14
-#define INT_LCD 15
-#define INT_ADC 16
-#define INT_I2C 17
-#define INT_RTCP 18
-#define INT_RTCA 19
-#define INT_NFC 20
-#define INT_SD0 21
-#define INT_GSB0 22
-#define INT_PK 23
-#define INT_USBH0 24
-#define INT_USBH1 25
-#define INT_G2D 26
-#define INT_ECC 27
-#define INT_SPI0RX 28
-#define INT_UART1 29
-#define INT_MSCL 30
-#define INT_GSB1 31
-/* PIC1 interrupts */
-#define INT_E0 32
-#define INT_E1 33
-#define INT_E2 34
-#define INT_E3 35
-#define INT_E4 36
-#define INT_E5 37
-#define INT_E6 38
-#define INT_E7 39
-#define INT_UART2 40
-#define INT_UART3 41
-#define INT_SPI1TX 42
-#define INT_SPI1RX 43
-#define INT_GSB2 44
-#define INT_SPDIF 45
-#define INT_CDIF 46
-#define INT_VBON 47
-#define INT_VBOFF 48
-#define INT_SD1 49
-#define INT_UART4 50
-#define INT_GDMA3 51
-#define INT_I2S1RX 52
-#define INT_I2S1TX 53
-#define INT_CAN0 54
-#define INT_CAN1 55
-#define INT_GSB3 56
-#define INT_KRST 57
-#define INT_UNUSED 58
-#define INT_SD0D3 59
-#define INT_SD1D3 60
-#define INT_GPS0 61
-#define INT_GPS1 62
-#define INT_GPS2 63
-
-#endif /* ASM_ARCH_TCC_IRQS_H */
diff --git a/arch/arm/plat-tcc/include/mach/system.h b/arch/arm/plat-tcc/include/mach/system.h
deleted file mode 100644
index 909e603..0000000
--- a/arch/arm/plat-tcc/include/mach/system.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- * Description: LINUX SYSTEM FUNCTIONS for TCC83x
- *
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <linux/clk.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-extern void plat_tcc_reboot(void);
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- plat_tcc_reboot();
-}
-
-#endif
diff --git a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h b/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
deleted file mode 100644
index 1d94282..0000000
--- a/arch/arm/plat-tcc/include/mach/tcc8k-regs.h
+++ /dev/null
@@ -1,807 +0,0 @@
-/*
- * Telechips TCC8000 register definitions
- *
- * (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPLv2.
- */
-
-#ifndef TCC8K_REGS_H
-#define TCC8K_REGS_H
-
-#include <linux/types.h>
-
-#define EXT_SDRAM_BASE 0x20000000
-#define INT_SRAM_BASE 0x30000000
-#define INT_SRAM_SIZE SZ_32K
-#define CS0_BASE 0x40000000
-#define CS1_BASE 0x50000000
-#define CS1_SIZE SZ_64K
-#define CS2_BASE 0x60000000
-#define CS3_BASE 0x70000000
-#define AHB_PERI_BASE 0x80000000
-#define AHB_PERI_SIZE SZ_64K
-#define APB0_PERI_BASE 0x90000000
-#define APB0_PERI_SIZE SZ_128K
-#define APB1_PERI_BASE 0x98000000
-#define APB1_PERI_SIZE SZ_128K
-#define DATA_TCM_BASE 0xa0000000
-#define DATA_TCM_SIZE SZ_8K
-#define EXT_MEM_CTRL_BASE 0xf0000000
-#define EXT_MEM_CTRL_SIZE SZ_4K
-
-#define CS1_BASE_VIRT (void __iomem *)0xf7000000
-#define AHB_PERI_BASE_VIRT (void __iomem *)0xf4000000
-#define APB0_PERI_BASE_VIRT (void __iomem *)0xf1000000
-#define APB1_PERI_BASE_VIRT (void __iomem *)0xf2000000
-#define EXT_MEM_CTRL_BASE_VIRT (void __iomem *)0xf3000000
-#define INT_SRAM_BASE_VIRT (void __iomem *)0xf5000000
-#define DATA_TCM_BASE_VIRT (void __iomem *)0xf6000000
-
-#define __REG(x) (*((volatile u32 *)(x)))
-
-/* USB Device Controller Registers */
-#define UDC_BASE (AHB_PERI_BASE_VIRT + 0x8000)
-#define UDC_BASE_PHYS (AHB_PERI_BASE + 0x8000)
-
-#define UDC_IR_OFFS 0x00
-#define UDC_EIR_OFFS 0x04
-#define UDC_EIER_OFFS 0x08
-#define UDC_FAR_OFFS 0x0c
-#define UDC_FNR_OFFS 0x10
-#define UDC_EDR_OFFS 0x14
-#define UDC_RT_OFFS 0x18
-#define UDC_SSR_OFFS 0x1c
-#define UDC_SCR_OFFS 0x20
-#define UDC_EP0SR_OFFS 0x24
-#define UDC_EP0CR_OFFS 0x28
-
-#define UDC_ESR_OFFS 0x2c
-#define UDC_ECR_OFFS 0x30
-#define UDC_BRCR_OFFS 0x34
-#define UDC_BWCR_OFFS 0x38
-#define UDC_MPR_OFFS 0x3c
-#define UDC_DCR_OFFS 0x40
-#define UDC_DTCR_OFFS 0x44
-#define UDC_DFCR_OFFS 0x48
-#define UDC_DTTCR1_OFFS 0x4c
-#define UDC_DTTCR2_OFFS 0x50
-#define UDC_ESR2_OFFS 0x54
-
-#define UDC_SCR2_OFFS 0x58
-#define UDC_EP0BUF_OFFS 0x60
-#define UDC_EP1BUF_OFFS 0x64
-#define UDC_EP2BUF_OFFS 0x68
-#define UDC_EP3BUF_OFFS 0x6c
-#define UDC_PLICR_OFFS 0xa0
-#define UDC_PCR_OFFS 0xa4
-
-#define UDC_UPCR0_OFFS 0xc8
-#define UDC_UPCR1_OFFS 0xcc
-#define UDC_UPCR2_OFFS 0xd0
-#define UDC_UPCR3_OFFS 0xd4
-
-/* Bits in UDC_EIR */
-#define UDC_EIR_EP0I (1 << 0)
-#define UDC_EIR_EP1I (1 << 1)
-#define UDC_EIR_EP2I (1 << 2)
-#define UDC_EIR_EP3I (1 << 3)
-#define UDC_EIR_EPI_MASK 0x0f
-
-/* Bits in UDC_EIER */
-#define UDC_EIER_EP0IE (1 << 0)
-#define UDC_EIER_EP1IE (1 << 1)
-#define UDC_EIER_EP2IE (1 << 2)
-#define UDC_EIER_EP3IE (1 << 3)
-
-/* Bits in UDC_FNR */
-#define UDC_FNR_FN_MASK 0x7ff
-#define UDC_FNR_SM (1 << 13)
-#define UDC_FNR_FTL (1 << 14)
-
-/* Bits in UDC_SSR */
-#define UDC_SSR_HFRES (1 << 0)
-#define UDC_SSR_HFSUSP (1 << 1)
-#define UDC_SSR_HFRM (1 << 2)
-#define UDC_SSR_SDE (1 << 3)
-#define UDC_SSR_HSP (1 << 4)
-#define UDC_SSR_DM (1 << 5)
-#define UDC_SSR_DP (1 << 6)
-#define UDC_SSR_TBM (1 << 7)
-#define UDC_SSR_VBON (1 << 8)
-#define UDC_SSR_VBOFF (1 << 9)
-#define UDC_SSR_EOERR (1 << 10)
-#define UDC_SSR_DCERR (1 << 11)
-#define UDC_SSR_TCERR (1 << 12)
-#define UDC_SSR_BSERR (1 << 13)
-#define UDC_SSR_TMERR (1 << 14)
-#define UDC_SSR_BAERR (1 << 15)
-
-/* Bits in UDC_SCR */
-#define UDC_SCR_HRESE (1 << 0)
-#define UDC_SCR_HSSPE (1 << 1)
-#define UDC_SCR_RRDE (1 << 5)
-#define UDC_SCR_SPDEN (1 << 6)
-#define UDC_SCR_DIEN (1 << 12)
-
-/* Bits in UDC_EP0SR */
-#define UDC_EP0SR_RSR (1 << 0)
-#define UDC_EP0SR_TST (1 << 1)
-#define UDC_EP0SR_SHT (1 << 4)
-#define UDC_EP0SR_LWO (1 << 6)
-
-/* Bits in UDC_EP0CR */
-#define UDC_EP0CR_ESS (1 << 1)
-
-/* Bits in UDC_ESR */
-#define UDC_ESR_RPS (1 << 0)
-#define UDC_ESR_TPS (1 << 1)
-#define UDC_ESR_LWO (1 << 4)
-#define UDC_ESR_FFS (1 << 6)
-
-/* Bits in UDC_ECR */
-#define UDC_ECR_ESS (1 << 1)
-#define UDC_ECR_CDP (1 << 2)
-
-#define UDC_ECR_FLUSH (1 << 6)
-#define UDC_ECR_DUEN (1 << 7)
-
-/* Bits in UDC_UPCR0 */
-#define UDC_UPCR0_VBD (1 << 1)
-#define UDC_UPCR0_VBDS (1 << 6)
-#define UDC_UPCR0_RCD_12 (0x0 << 9)
-#define UDC_UPCR0_RCD_24 (0x1 << 9)
-#define UDC_UPCR0_RCD_48 (0x2 << 9)
-#define UDC_UPCR0_RCS_EXT (0x1 << 11)
-#define UDC_UPCR0_RCS_XTAL (0x0 << 11)
-
-/* Bits in UDC_UPCR1 */
-#define UDC_UPCR1_CDT(x) ((x) << 0)
-#define UDC_UPCR1_OTGT(x) ((x) << 3)
-#define UDC_UPCR1_SQRXT(x) ((x) << 8)
-#define UDC_UPCR1_TXFSLST(x) ((x) << 12)
-
-/* Bits in UDC_UPCR2 */
-#define UDC_UPCR2_TP (1 << 0)
-#define UDC_UPCR2_TXRT(x) ((x) << 2)
-#define UDC_UPCR2_TXVRT(x) ((x) << 5)
-#define UDC_UPCR2_OPMODE(x) ((x) << 9)
-#define UDC_UPCR2_XCVRSEL(x) ((x) << 12)
-#define UDC_UPCR2_TM (1 << 14)
-
-/* USB Host Controller registers */
-#define USBH0_BASE (AHB_PERI_BASE_VIRT + 0xb000)
-#define USBH1_BASE (AHB_PERI_BASE_VIRT + 0xb800)
-
-#define OHCI_INT_ENABLE_OFFS 0x10
-
-#define RH_DESCRIPTOR_A_OFFS 0x48
-#define RH_DESCRIPTOR_B_OFFS 0x4c
-
-#define USBHTCFG0_OFFS 0x100
-#define USBHHCFG0_OFFS 0x104
-#define USBHHCFG1_OFFS 0x104
-
-/* DMA controller registers */
-#define DMAC0_BASE (AHB_PERI_BASE + 0x4000)
-#define DMAC1_BASE (AHB_PERI_BASE + 0xa000)
-#define DMAC2_BASE (AHB_PERI_BASE + 0x4800)
-#define DMAC3_BASE (AHB_PERI_BASE + 0xa800)
-
-#define DMAC_CH_OFFSET(ch) (ch * 0x30)
-
-#define ST_SADR_OFFS 0x00
-#define SPARAM_OFFS 0x04
-#define C_SADR_OFFS 0x0c
-#define ST_DADR_OFFS 0x10
-#define DPARAM_OFFS 0x14
-#define C_DADR_OFFS 0x1c
-#define HCOUNT_OFFS 0x20
-#define CHCTRL_OFFS 0x24
-#define RPTCTRL_OFFS 0x28
-#define EXTREQ_A_OFFS 0x2c
-
-/* Bits in CHCTRL register */
-#define CHCTRL_EN (1 << 0)
-
-#define CHCTRL_IEN (1 << 2)
-#define CHCTRL_FLAG (1 << 3)
-#define CHCTRL_WSIZE8 (0 << 4)
-#define CHCTRL_WSIZE16 (1 << 4)
-#define CHCTRL_WSIZE32 (2 << 4)
-
-#define CHCTRL_BSIZE1 (0 << 6)
-#define CHCTRL_BSIZE2 (1 << 6)
-#define CHCTRL_BSIZE4 (2 << 6)
-#define CHCTRL_BSIZE8 (3 << 6)
-
-#define CHCTRL_TYPE_SINGLE_E (0 << 8)
-#define CHCTRL_TYPE_HW (1 << 8)
-#define CHCTRL_TYPE_SW (2 << 8)
-#define CHCTRL_TYPE_SINGLE_L (3 << 8)
-
-#define CHCTRL_BST (1 << 10)
-
-/* Use DMA controller 0, channel 2 for USB */
-#define USB_DMA_BASE (DMAC0_BASE + DMAC_CH_OFFSET(2))
-
-/* NAND flash controller registers */
-#define NFC_BASE (AHB_PERI_BASE_VIRT + 0xd000)
-#define NFC_BASE_PHYS (AHB_PERI_BASE + 0xd000)
-
-#define NFC_CMD_OFFS 0x00
-#define NFC_LADDR_OFFS 0x04
-#define NFC_BADDR_OFFS 0x08
-#define NFC_SADDR_OFFS 0x0c
-#define NFC_WDATA_OFFS 0x10
-#define NFC_LDATA_OFFS 0x20
-#define NFC_SDATA_OFFS 0x40
-#define NFC_CTRL_OFFS 0x50
-#define NFC_PSTART_OFFS 0x54
-#define NFC_RSTART_OFFS 0x58
-#define NFC_DSIZE_OFFS 0x5c
-#define NFC_IREQ_OFFS 0x60
-#define NFC_RST_OFFS 0x64
-#define NFC_CTRL1_OFFS 0x68
-#define NFC_MDATA_OFFS 0x70
-
-#define NFC_WDATA_PHYS_ADDR (NFC_BASE_PHYS + NFC_WDATA_OFFS)
-
-/* Bits in NFC_CTRL */
-#define NFC_CTRL_BHLD_MASK (0xf << 0)
-#define NFC_CTRL_BPW_MASK (0xf << 4)
-#define NFC_CTRL_BSTP_MASK (0xf << 8)
-#define NFC_CTRL_CADDR_MASK (0x7 << 12)
-#define NFC_CTRL_CADDR_1 (0x0 << 12)
-#define NFC_CTRL_CADDR_2 (0x1 << 12)
-#define NFC_CTRL_CADDR_3 (0x2 << 12)
-#define NFC_CTRL_CADDR_4 (0x3 << 12)
-#define NFC_CTRL_CADDR_5 (0x4 << 12)
-#define NFC_CTRL_MSK (1 << 15)
-#define NFC_CTRL_PSIZE256 (0 << 16)
-#define NFC_CTRL_PSIZE512 (1 << 16)
-#define NFC_CTRL_PSIZE1024 (2 << 16)
-#define NFC_CTRL_PSIZE2048 (3 << 16)
-#define NFC_CTRL_PSIZE4096 (4 << 16)
-#define NFC_CTRL_PSIZE_MASK (7 << 16)
-#define NFC_CTRL_BSIZE1 (0 << 19)
-#define NFC_CTRL_BSIZE2 (1 << 19)
-#define NFC_CTRL_BSIZE4 (2 << 19)
-#define NFC_CTRL_BSIZE8 (3 << 19)
-#define NFC_CTRL_BSIZE_MASK (3 << 19)
-#define NFC_CTRL_RDY (1 << 21)
-#define NFC_CTRL_CS0SEL (1 << 22)
-#define NFC_CTRL_CS1SEL (1 << 23)
-#define NFC_CTRL_CS2SEL (1 << 24)
-#define NFC_CTRL_CS3SEL (1 << 25)
-#define NFC_CTRL_CSMASK (0xf << 22)
-#define NFC_CTRL_BW (1 << 26)
-#define NFC_CTRL_FS (1 << 27)
-#define NFC_CTRL_DEN (1 << 28)
-#define NFC_CTRL_READ_IEN (1 << 29)
-#define NFC_CTRL_PROG_IEN (1 << 30)
-#define NFC_CTRL_RDY_IEN (1 << 31)
-
-/* Bits in NFC_IREQ */
-#define NFC_IREQ_IRQ0 (1 << 0)
-#define NFC_IREQ_IRQ1 (1 << 1)
-#define NFC_IREQ_IRQ2 (1 << 2)
-
-#define NFC_IREQ_FLAG0 (1 << 4)
-#define NFC_IREQ_FLAG1 (1 << 5)
-#define NFC_IREQ_FLAG2 (1 << 6)
-
-/* MMC controller registers */
-#define MMC0_BASE (AHB_PERI_BASE_VIRT + 0xe000)
-#define MMC1_BASE (AHB_PERI_BASE_VIRT + 0xe800)
-
-/* UART base addresses */
-
-#define UART0_BASE (APB0_PERI_BASE_VIRT + 0x07000)
-#define UART0_BASE_PHYS (APB0_PERI_BASE + 0x07000)
-#define UART1_BASE (APB0_PERI_BASE_VIRT + 0x08000)
-#define UART1_BASE_PHYS (APB0_PERI_BASE + 0x08000)
-#define UART2_BASE (APB0_PERI_BASE_VIRT + 0x09000)
-#define UART2_BASE_PHYS (APB0_PERI_BASE + 0x09000)
-#define UART3_BASE (APB0_PERI_BASE_VIRT + 0x0a000)
-#define UART3_BASE_PHYS (APB0_PERI_BASE + 0x0a000)
-#define UART4_BASE (APB0_PERI_BASE_VIRT + 0x15000)
-#define UART4_BASE_PHYS (APB0_PERI_BASE + 0x15000)
-
-#define UART_BASE UART0_BASE
-#define UART_BASE_PHYS UART0_BASE_PHYS
-
-/* ECC controller */
-#define ECC_CTR_BASE (APB0_PERI_BASE_VIRT + 0xd000)
-
-#define ECC_CTRL_OFFS 0x00
-#define ECC_BASE_OFFS 0x04
-#define ECC_MASK_OFFS 0x08
-#define ECC_CLEAR_OFFS 0x0c
-#define ECC4_0_OFFS 0x10
-#define ECC4_1_OFFS 0x14
-
-#define ECC_EADDR0_OFFS 0x50
-
-#define ECC_ERRNUM_OFFS 0x90
-#define ECC_IREQ_OFFS 0x94
-
-/* Bits in ECC_CTRL */
-#define ECC_CTRL_ECC4_DIEN (1 << 28)
-#define ECC_CTRL_ECC8_DIEN (1 << 29)
-#define ECC_CTRL_ECC12_DIEN (1 << 30)
-#define ECC_CTRL_ECC_DISABLE 0x0
-#define ECC_CTRL_ECC_SLC_ENC 0x8
-#define ECC_CTRL_ECC_SLC_DEC 0x9
-#define ECC_CTRL_ECC4_ENC 0xa
-#define ECC_CTRL_ECC4_DEC 0xb
-#define ECC_CTRL_ECC8_ENC 0xc
-#define ECC_CTRL_ECC8_DEC 0xd
-#define ECC_CTRL_ECC12_ENC 0xe
-#define ECC_CTRL_ECC12_DEC 0xf
-
-/* Bits in ECC_IREQ */
-#define ECC_IREQ_E4DI (1 << 4)
-
-#define ECC_IREQ_E4DF (1 << 20)
-#define ECC_IREQ_E4EF (1 << 21)
-
-/* Interrupt controller */
-
-#define PIC0_BASE (APB1_PERI_BASE_VIRT + 0x3000)
-#define PIC0_BASE_PHYS (APB1_PERI_BASE + 0x3000)
-
-#define PIC0_IEN_OFFS 0x00
-#define PIC0_CREQ_OFFS 0x04
-#define PIC0_IREQ_OFFS 0x08
-#define PIC0_IRQSEL_OFFS 0x0c
-#define PIC0_SRC_OFFS 0x10
-#define PIC0_MREQ_OFFS 0x14
-#define PIC0_TSTREQ_OFFS 0x18
-#define PIC0_POL_OFFS 0x1c
-#define PIC0_IRQ_OFFS 0x20
-#define PIC0_FIQ_OFFS 0x24
-#define PIC0_MIRQ_OFFS 0x28
-#define PIC0_MFIQ_OFFS 0x2c
-#define PIC0_TMODE_OFFS 0x30
-#define PIC0_SYNC_OFFS 0x34
-#define PIC0_WKUP_OFFS 0x38
-#define PIC0_TMODEA_OFFS 0x3c
-#define PIC0_INTOEN_OFFS 0x40
-#define PIC0_MEN0_OFFS 0x44
-#define PIC0_MEN_OFFS 0x48
-
-#define PIC0_IEN __REG(PIC0_BASE + PIC0_IEN_OFFS)
-#define PIC0_IEN_PHYS __REG(PIC0_BASE_PHYS + PIC0_IEN_OFFS)
-#define PIC0_CREQ __REG(PIC0_BASE + PIC0_CREQ_OFFS)
-#define PIC0_CREQ_PHYS __REG(PIC0_BASE_PHYS + PIC0_CREQ_OFFS)
-#define PIC0_IREQ __REG(PIC0_BASE + PIC0_IREQ_OFFS)
-#define PIC0_IRQSEL __REG(PIC0_BASE + PIC0_IRQSEL_OFFS)
-#define PIC0_IRQSEL_PHYS __REG(PIC0_BASE_PHYS + PIC0_IRQSEL_OFFS)
-#define PIC0_SRC __REG(PIC0_BASE + PIC0_SRC_OFFS)
-#define PIC0_MREQ __REG(PIC0_BASE + PIC0_MREQ_OFFS)
-#define PIC0_TSTREQ __REG(PIC0_BASE + PIC0_TSTREQ_OFFS)
-#define PIC0_POL __REG(PIC0_BASE + PIC0_POL_OFFS)
-#define PIC0_IRQ __REG(PIC0_BASE + PIC0_IRQ_OFFS)
-#define PIC0_FIQ __REG(PIC0_BASE + PIC0_FIQ_OFFS)
-#define PIC0_MIRQ __REG(PIC0_BASE + PIC0_MIRQ_OFFS)
-#define PIC0_MFIQ __REG(PIC0_BASE + PIC0_MFIQ_OFFS)
-#define PIC0_TMODE __REG(PIC0_BASE + PIC0_TMODE_OFFS)
-#define PIC0_TMODE_PHYS __REG(PIC0_BASE_PHYS + PIC0_TMODE_OFFS)
-#define PIC0_SYNC __REG(PIC0_BASE + PIC0_SYNC_OFFS)
-#define PIC0_WKUP __REG(PIC0_BASE + PIC0_WKUP_OFFS)
-#define PIC0_TMODEA __REG(PIC0_BASE + PIC0_TMODEA_OFFS)
-#define PIC0_INTOEN __REG(PIC0_BASE + PIC0_INTOEN_OFFS)
-#define PIC0_MEN0 __REG(PIC0_BASE + PIC0_MEN0_OFFS)
-#define PIC0_MEN __REG(PIC0_BASE + PIC0_MEN_OFFS)
-
-#define PIC1_BASE (APB1_PERI_BASE_VIRT + 0x3080)
-
-#define PIC1_IEN_OFFS 0x00
-#define PIC1_CREQ_OFFS 0x04
-#define PIC1_IREQ_OFFS 0x08
-#define PIC1_IRQSEL_OFFS 0x0c
-#define PIC1_SRC_OFFS 0x10
-#define PIC1_MREQ_OFFS 0x14
-#define PIC1_TSTREQ_OFFS 0x18
-#define PIC1_POL_OFFS 0x1c
-#define PIC1_IRQ_OFFS 0x20
-#define PIC1_FIQ_OFFS 0x24
-#define PIC1_MIRQ_OFFS 0x28
-#define PIC1_MFIQ_OFFS 0x2c
-#define PIC1_TMODE_OFFS 0x30
-#define PIC1_SYNC_OFFS 0x34
-#define PIC1_WKUP_OFFS 0x38
-#define PIC1_TMODEA_OFFS 0x3c
-#define PIC1_INTOEN_OFFS 0x40
-#define PIC1_MEN1_OFFS 0x44
-#define PIC1_MEN_OFFS 0x48
-
-#define PIC1_IEN __REG(PIC1_BASE + PIC1_IEN_OFFS)
-#define PIC1_CREQ __REG(PIC1_BASE + PIC1_CREQ_OFFS)
-#define PIC1_IREQ __REG(PIC1_BASE + PIC1_IREQ_OFFS)
-#define PIC1_IRQSEL __REG(PIC1_BASE + PIC1_IRQSEL_OFFS)
-#define PIC1_SRC __REG(PIC1_BASE + PIC1_SRC_OFFS)
-#define PIC1_MREQ __REG(PIC1_BASE + PIC1_MREQ_OFFS)
-#define PIC1_TSTREQ __REG(PIC1_BASE + PIC1_TSTREQ_OFFS)
-#define PIC1_POL __REG(PIC1_BASE + PIC1_POL_OFFS)
-#define PIC1_IRQ __REG(PIC1_BASE + PIC1_IRQ_OFFS)
-#define PIC1_FIQ __REG(PIC1_BASE + PIC1_FIQ_OFFS)
-#define PIC1_MIRQ __REG(PIC1_BASE + PIC1_MIRQ_OFFS)
-#define PIC1_MFIQ __REG(PIC1_BASE + PIC1_MFIQ_OFFS)
-#define PIC1_TMODE __REG(PIC1_BASE + PIC1_TMODE_OFFS)
-#define PIC1_SYNC __REG(PIC1_BASE + PIC1_SYNC_OFFS)
-#define PIC1_WKUP __REG(PIC1_BASE + PIC1_WKUP_OFFS)
-#define PIC1_TMODEA __REG(PIC1_BASE + PIC1_TMODEA_OFFS)
-#define PIC1_INTOEN __REG(PIC1_BASE + PIC1_INTOEN_OFFS)
-#define PIC1_MEN1 __REG(PIC1_BASE + PIC1_MEN1_OFFS)
-#define PIC1_MEN __REG(PIC1_BASE + PIC1_MEN_OFFS)
-
-/* Timer registers */
-#define TIMER_BASE (APB1_PERI_BASE_VIRT + 0x4000)
-#define TIMER_BASE_PHYS (APB1_PERI_BASE + 0x4000)
-
-#define TWDCFG_OFFS 0x70
-
-#define TC32EN_OFFS 0x80
-#define TC32LDV_OFFS 0x84
-#define TC32CMP0_OFFS 0x88
-#define TC32CMP1_OFFS 0x8c
-#define TC32PCNT_OFFS 0x90
-#define TC32MCNT_OFFS 0x94
-#define TC32IRQ_OFFS 0x98
-
-/* Bits in TC32EN */
-#define TC32EN_PRESCALE_MASK 0x00ffffff
-#define TC32EN_ENABLE (1 << 24)
-#define TC32EN_LOADZERO (1 << 25)
-#define TC32EN_STOPMODE (1 << 26)
-#define TC32EN_LDM0 (1 << 28)
-#define TC32EN_LDM1 (1 << 29)
-
-/* Bits in TC32IRQ */
-#define TC32IRQ_MSTAT_MASK 0x0000001f
-#define TC32IRQ_RSTAT_MASK (0x1f << 8)
-#define TC32IRQ_IRQEN0 (1 << 16)
-#define TC32IRQ_IRQEN1 (1 << 17)
-#define TC32IRQ_IRQEN2 (1 << 18)
-#define TC32IRQ_IRQEN3 (1 << 19)
-#define TC32IRQ_IRQEN4 (1 << 20)
-#define TC32IRQ_RSYNC (1 << 30)
-#define TC32IRQ_IRQCLR (1 << 31)
-
-/* GPIO registers */
-#define GPIOPD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPD_DAT_OFFS 0x00
-#define GPIOPD_DOE_OFFS 0x04
-#define GPIOPD_FS0_OFFS 0x08
-#define GPIOPD_FS1_OFFS 0x0c
-#define GPIOPD_FS2_OFFS 0x10
-#define GPIOPD_RPU_OFFS 0x30
-#define GPIOPD_RPD_OFFS 0x34
-#define GPIOPD_DV0_OFFS 0x38
-#define GPIOPD_DV1_OFFS 0x3c
-
-#define GPIOPS_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPS_DAT_OFFS 0x40
-#define GPIOPS_DOE_OFFS 0x44
-#define GPIOPS_FS0_OFFS 0x48
-#define GPIOPS_FS1_OFFS 0x4c
-#define GPIOPS_FS2_OFFS 0x50
-#define GPIOPS_FS3_OFFS 0x54
-#define GPIOPS_RPU_OFFS 0x70
-#define GPIOPS_RPD_OFFS 0x74
-#define GPIOPS_DV0_OFFS 0x78
-#define GPIOPS_DV1_OFFS 0x7c
-
-#define GPIOPS_FS1_SDH0_BITS 0x000000ff
-#define GPIOPS_FS1_SDH1_BITS 0x0000ff00
-
-#define GPIOPU_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOPU_DAT_OFFS 0x80
-#define GPIOPU_DOE_OFFS 0x84
-#define GPIOPU_FS0_OFFS 0x88
-#define GPIOPU_FS1_OFFS 0x8c
-#define GPIOPU_FS2_OFFS 0x90
-#define GPIOPU_RPU_OFFS 0xb0
-#define GPIOPU_RPD_OFFS 0xb4
-#define GPIOPU_DV0_OFFS 0xb8
-#define GPIOPU_DV1_OFFS 0xbc
-
-#define GPIOPU_FS0_TXD0 (1 << 0)
-#define GPIOPU_FS0_RXD0 (1 << 1)
-#define GPIOPU_FS0_CTS0 (1 << 2)
-#define GPIOPU_FS0_RTS0 (1 << 3)
-#define GPIOPU_FS0_TXD1 (1 << 4)
-#define GPIOPU_FS0_RXD1 (1 << 5)
-#define GPIOPU_FS0_CTS1 (1 << 6)
-#define GPIOPU_FS0_RTS1 (1 << 7)
-#define GPIOPU_FS0_TXD2 (1 << 8)
-#define GPIOPU_FS0_RXD2 (1 << 9)
-#define GPIOPU_FS0_CTS2 (1 << 10)
-#define GPIOPU_FS0_RTS2 (1 << 11)
-#define GPIOPU_FS0_TXD3 (1 << 12)
-#define GPIOPU_FS0_RXD3 (1 << 13)
-#define GPIOPU_FS0_CTS3 (1 << 14)
-#define GPIOPU_FS0_RTS3 (1 << 15)
-#define GPIOPU_FS0_TXD4 (1 << 16)
-#define GPIOPU_FS0_RXD4 (1 << 17)
-#define GPIOPU_FS0_CTS4 (1 << 18)
-#define GPIOPU_FS0_RTS4 (1 << 19)
-
-#define GPIOFC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFC_DAT_OFFS 0xc0
-#define GPIOFC_DOE_OFFS 0xc4
-#define GPIOFC_FS0_OFFS 0xc8
-#define GPIOFC_FS1_OFFS 0xcc
-#define GPIOFC_FS2_OFFS 0xd0
-#define GPIOFC_FS3_OFFS 0xd4
-#define GPIOFC_RPU_OFFS 0xf0
-#define GPIOFC_RPD_OFFS 0xf4
-#define GPIOFC_DV0_OFFS 0xf8
-#define GPIOFC_DV1_OFFS 0xfc
-
-#define GPIOFD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOFD_DAT_OFFS 0x100
-#define GPIOFD_DOE_OFFS 0x104
-#define GPIOFD_FS0_OFFS 0x108
-#define GPIOFD_FS1_OFFS 0x10c
-#define GPIOFD_FS2_OFFS 0x110
-#define GPIOFD_RPU_OFFS 0x130
-#define GPIOFD_RPD_OFFS 0x134
-#define GPIOFD_DV0_OFFS 0x138
-#define GPIOFD_DV1_OFFS 0x13c
-
-#define GPIOLC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLC_DAT_OFFS 0x140
-#define GPIOLC_DOE_OFFS 0x144
-#define GPIOLC_FS0_OFFS 0x148
-#define GPIOLC_FS1_OFFS 0x14c
-#define GPIOLC_RPU_OFFS 0x170
-#define GPIOLC_RPD_OFFS 0x174
-#define GPIOLC_DV0_OFFS 0x178
-#define GPIOLC_DV1_OFFS 0x17c
-
-#define GPIOLD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOLD_DAT_OFFS 0x180
-#define GPIOLD_DOE_OFFS 0x184
-#define GPIOLD_FS0_OFFS 0x188
-#define GPIOLD_FS1_OFFS 0x18c
-#define GPIOLD_FS2_OFFS 0x190
-#define GPIOLD_RPU_OFFS 0x1b0
-#define GPIOLD_RPD_OFFS 0x1b4
-#define GPIOLD_DV0_OFFS 0x1b8
-#define GPIOLD_DV1_OFFS 0x1bc
-
-#define GPIOAD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOAD_DAT_OFFS 0x1c0
-#define GPIOAD_DOE_OFFS 0x1c4
-#define GPIOAD_FS0_OFFS 0x1c8
-#define GPIOAD_RPU_OFFS 0x1f0
-#define GPIOAD_RPD_OFFS 0x1f4
-#define GPIOAD_DV0_OFFS 0x1f8
-#define GPIOAD_DV1_OFFS 0x1fc
-
-#define GPIOXC_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXC_DAT_OFFS 0x200
-#define GPIOXC_DOE_OFFS 0x204
-#define GPIOXC_FS0_OFFS 0x208
-#define GPIOXC_RPU_OFFS 0x230
-#define GPIOXC_RPD_OFFS 0x234
-#define GPIOXC_DV0_OFFS 0x238
-#define GPIOXC_DV1_OFFS 0x23c
-
-#define GPIOXC_FS0 __REG(GPIOXC_BASE + GPIOXC_FS0_OFFS)
-
-#define GPIOXC_FS0_CS0 (1 << 26)
-#define GPIOXC_FS0_CS1 (1 << 27)
-
-#define GPIOXD_BASE (APB1_PERI_BASE_VIRT + 0x5000)
-
-#define GPIOXD_DAT_OFFS 0x240
-#define GPIOXD_FS0_OFFS 0x248
-#define GPIOXD_RPU_OFFS 0x270
-#define GPIOXD_RPD_OFFS 0x274
-#define GPIOXD_DV0_OFFS 0x278
-#define GPIOXD_DV1_OFFS 0x27c
-
-#define GPIOPK_BASE (APB1_PERI_BASE_VIRT + 0x1c000)
-
-#define GPIOPK_RST_OFFS 0x008
-#define GPIOPK_DAT_OFFS 0x100
-#define GPIOPK_DOE_OFFS 0x104
-#define GPIOPK_FS0_OFFS 0x108
-#define GPIOPK_FS1_OFFS 0x10c
-#define GPIOPK_FS2_OFFS 0x110
-#define GPIOPK_IRQST_OFFS 0x210
-#define GPIOPK_IRQEN_OFFS 0x214
-#define GPIOPK_IRQPOL_OFFS 0x218
-#define GPIOPK_IRQTM0_OFFS 0x21c
-#define GPIOPK_IRQTM1_OFFS 0x220
-#define GPIOPK_CTL_OFFS 0x22c
-
-#define PMGPIO_BASE (APB1_PERI_BASE_VIRT + 0x10000)
-#define BACKUP_RAM_BASE PMGPIO_BASE
-
-#define PMGPIO_DAT_OFFS 0x800
-#define PMGPIO_DOE_OFFS 0x804
-#define PMGPIO_FS0_OFFS 0x808
-#define PMGPIO_RPU_OFFS 0x810
-#define PMGPIO_RPD_OFFS 0x814
-#define PMGPIO_DV0_OFFS 0x818
-#define PMGPIO_DV1_OFFS 0x81c
-#define PMGPIO_EE0_OFFS 0x820
-#define PMGPIO_EE1_OFFS 0x824
-#define PMGPIO_CTL_OFFS 0x828
-#define PMGPIO_DI_OFFS 0x82c
-#define PMGPIO_STR_OFFS 0x830
-#define PMGPIO_STF_OFFS 0x834
-#define PMGPIO_POL_OFFS 0x838
-#define PMGPIO_APB_OFFS 0x800
-
-/* Clock controller registers */
-#define CKC_BASE ((void __iomem *)(APB1_PERI_BASE_VIRT + 0x6000))
-
-#define CLKCTRL_OFFS 0x00
-#define PLL0CFG_OFFS 0x04
-#define PLL1CFG_OFFS 0x08
-#define CLKDIVC0_OFFS 0x0c
-
-#define BCLKCTR0_OFFS 0x14
-#define SWRESET0_OFFS 0x18
-
-#define BCLKCTR1_OFFS 0x60
-#define SWRESET1_OFFS 0x64
-#define PWDCTL_OFFS 0x68
-#define PLL2CFG_OFFS 0x6c
-#define CLKDIVC1_OFFS 0x70
-
-#define ACLKREF_OFFS 0x80
-#define ACLKI2C_OFFS 0x84
-#define ACLKSPI0_OFFS 0x88
-#define ACLKSPI1_OFFS 0x8c
-#define ACLKUART0_OFFS 0x90
-#define ACLKUART1_OFFS 0x94
-#define ACLKUART2_OFFS 0x98
-#define ACLKUART3_OFFS 0x9c
-#define ACLKUART4_OFFS 0xa0
-#define ACLKTCT_OFFS 0xa4
-#define ACLKTCX_OFFS 0xa8
-#define ACLKTCZ_OFFS 0xac
-#define ACLKADC_OFFS 0xb0
-#define ACLKDAI0_OFFS 0xb4
-#define ACLKDAI1_OFFS 0xb8
-#define ACLKLCD_OFFS 0xbc
-#define ACLKSPDIF_OFFS 0xc0
-#define ACLKUSBH_OFFS 0xc4
-#define ACLKSDH0_OFFS 0xc8
-#define ACLKSDH1_OFFS 0xcc
-#define ACLKC3DEC_OFFS 0xd0
-#define ACLKEXT_OFFS 0xd4
-#define ACLKCAN0_OFFS 0xd8
-#define ACLKCAN1_OFFS 0xdc
-#define ACLKGSB0_OFFS 0xe0
-#define ACLKGSB1_OFFS 0xe4
-#define ACLKGSB2_OFFS 0xe8
-#define ACLKGSB3_OFFS 0xec
-
-#define PLLxCFG_PD (1 << 31)
-
-/* CLKCTRL bits */
-#define CLKCTRL_XE (1 << 31)
-
-/* CLKDIVCx bits */
-#define CLKDIVC0_XTE (1 << 7)
-#define CLKDIVC0_XE (1 << 15)
-#define CLKDIVC0_P1E (1 << 23)
-#define CLKDIVC0_P0E (1 << 31)
-
-#define CLKDIVC1_P2E (1 << 7)
-
-/* BCLKCTR0 clock bits */
-#define BCLKCTR0_USBD (1 << 4)
-#define BCLKCTR0_ECC (1 << 9)
-#define BCLKCTR0_USBH0 (1 << 11)
-#define BCLKCTR0_NFC (1 << 16)
-
-/* BCLKCTR1 clock bits */
-#define BCLKCTR1_USBH1 (1 << 20)
-
-/* SWRESET0 bits */
-#define SWRESET0_USBD (1 << 4)
-#define SWRESET0_USBH0 (1 << 11)
-
-/* SWRESET1 bits */
-#define SWRESET1_USBH1 (1 << 20)
-
-/* System clock sources.
- * Note: These are the clock sources that serve as parents for
- * all other clocks. They have no parents themselves.
- *
- * These values are used for struct clk->root_id. All clocks
- * that are not system clock sources have this value set to
- * CLK_SRC_NOROOT.
- * The values for system clocks start with CLK_SRC_PLL0 == 0
- * because this gives us exactly the values needed for the lower
- * 4 bits of ACLK_* registers. Therefore, CLK_SRC_NOROOT is
- * defined as -1 to not disturb the order.
- */
-enum root_clks {
- CLK_SRC_NOROOT = -1,
- CLK_SRC_PLL0 = 0,
- CLK_SRC_PLL1,
- CLK_SRC_PLL0DIV,
- CLK_SRC_PLL1DIV,
- CLK_SRC_XI,
- CLK_SRC_XIDIV,
- CLK_SRC_XTI,
- CLK_SRC_XTIDIV,
- CLK_SRC_PLL2,
- CLK_SRC_PLL2DIV,
- CLK_SRC_PK0,
- CLK_SRC_PK1,
- CLK_SRC_PK2,
- CLK_SRC_PK3,
- CLK_SRC_PK4,
- CLK_SRC_48MHZ
-};
-
-#define CLK_SRC_MASK 0xf
-
-/* Bits in ACLK* registers */
-#define ACLK_EN (1 << 28)
-#define ACLK_SEL_SHIFT 24
-#define ACLK_SEL_MASK 0x0f000000
-#define ACLK_DIV_MASK 0x00000fff
-
-/* System configuration registers */
-
-#define SCFG_BASE (APB1_PERI_BASE_VIRT + 0x13000)
-
-#define BMI_OFFS 0x00
-#define AHBCON0_OFFS 0x04
-#define APBPWE_OFFS 0x08
-#define DTCMWAIT_OFFS 0x0c
-#define ECCSEL_OFFS 0x10
-#define AHBCON1_OFFS 0x14
-#define SDHCFG_OFFS 0x18
-#define REMAP_OFFS 0x20
-#define LCDSIAE_OFFS 0x24
-#define XMCCFG_OFFS 0xe0
-#define IMCCFG_OFFS 0xe4
-
-/* Values for ECCSEL */
-#define ECCSEL_EXTMEM 0x0
-#define ECCSEL_DTCM 0x1
-#define ECCSEL_INT_SRAM 0x2
-#define ECCSEL_AHB 0x3
-
-/* Bits in XMCCFG */
-#define XMCCFG_NFCE (1 << 1)
-#define XMCCFG_FDXD (1 << 2)
-
-/* External memory controller registers */
-
-#define EMC_BASE EXT_MEM_CTRL_BASE
-
-#define SDCFG_OFFS 0x00
-#define SDFSM_OFFS 0x04
-#define MCFG_OFFS 0x08
-
-#define CSCFG0_OFFS 0x10
-#define CSCFG1_OFFS 0x14
-#define CSCFG2_OFFS 0x18
-#define CSCFG3_OFFS 0x1c
-
-#define MCFG_SDEN (1 << 4)
-
-#endif /* TCC8K_REGS_H */
diff --git a/arch/arm/plat-tcc/include/mach/timex.h b/arch/arm/plat-tcc/include/mach/timex.h
deleted file mode 100644
index 057acbe..0000000
--- a/arch/arm/plat-tcc/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * A definition needed by arch core code.
- *
- */
-#define CLOCK_TICK_RATE (HZ * 100000UL)
diff --git a/arch/arm/plat-tcc/include/mach/uncompress.h b/arch/arm/plat-tcc/include/mach/uncompress.h
deleted file mode 100644
index 7a3e33a..0000000
--- a/arch/arm/plat-tcc/include/mach/uncompress.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2009 Hans J. Koch <hjk@linutronix.de>
- *
- * This file is licensed under the terms of the GPL version 2.
- */
-
-#include <linux/serial_reg.h>
-#include <linux/types.h>
-
-#include <mach/tcc8k-regs.h>
-
-unsigned int system_rev;
-
-#define ID_MASK 0x7fff
-
-static void putc(int c)
-{
- u32 *uart_lsr = (u32 *)(UART_BASE_PHYS + (UART_LSR << 2));
- u32 *uart_tx = (u32 *)(UART_BASE_PHYS + (UART_TX << 2));
-
- while (!(*uart_lsr & UART_LSR_THRE))
- barrier();
- *uart_tx = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/plat-tcc/include/mach/vmalloc.h b/arch/arm/plat-tcc/include/mach/vmalloc.h
deleted file mode 100644
index 99414d9..0000000
--- a/arch/arm/plat-tcc/include/mach/vmalloc.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * Author: <linux@telechips.com>
- * Created: June 10, 2008
- *
- * Copyright (C) 2000 Russell King.
- * Copyright (C) 2008-2009 Telechips
- *
- * Licensed under the terms of the GPL v2.
- */
-#define VMALLOC_END 0xf0000000UL
diff --git a/arch/arm/plat-tcc/system.c b/arch/arm/plat-tcc/system.c
deleted file mode 100644
index cc208fa..0000000
--- a/arch/arm/plat-tcc/system.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * System functions for Telechips TCCxxxx SoCs
- *
- * Copyright (C) Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- *
- */
-
-#include <linux/io.h>
-
-#include <mach/tcc8k-regs.h>
-
-/* System reboot */
-void plat_tcc_reboot(void)
-{
- /* Make sure clocks are on */
- __raw_writel(0xffffffff, CKC_BASE + BCLKCTR0_OFFS);
-
- /* Enable watchdog reset */
- __raw_writel(0x49, TIMER_BASE + TWDCFG_OFFS);
- /* Wait for reset */
- while(1)
- ;
-}
--
1.7.6.3
^ permalink raw reply related [flat|nested] 13+ messages in thread