* [PATCH v2] ASoC: twl4030: Debug code cleanup
@ 2012-02-21 7:34 Peter Ujfalusi
2012-02-21 9:59 ` Mark Brown
0 siblings, 1 reply; 2+ messages in thread
From: Peter Ujfalusi @ 2012-02-21 7:34 UTC (permalink / raw)
To: Mark Brown, Liam Girdwood; +Cc: alsa-devel
Replace the printk(KERN_ERR* instances with dev_err in the driver.
While we are here clean up some of the debug messages as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi Mark,
your branch was ahead of Liam's, and Takashi's asoc tree that is why it failed
to apply cleanly.
I have created this patch against your for-next branch.
There were one typo fix which caused the git am failure.
No other chganges since v1.
Regards,
Peter
sound/soc/codecs/twl4030.c | 33 +++++++++++++++++----------------
1 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index d7eee0d..170cf9a 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -1002,8 +1002,8 @@ static int snd_soc_put_twl4030_opmode_enum_double(struct snd_kcontrol *kcontrol,
unsigned short mask, bitmask;
if (twl4030->configured) {
- printk(KERN_ERR "twl4030 operation mode cannot be "
- "changed on-the-fly\n");
+ dev_err(codec->dev,
+ "operation mode cannot be changed on-the-fly\n");
return -EBUSY;
}
@@ -1800,7 +1800,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
mode |= TWL4030_APLL_RATE_96000;
break;
default:
- printk(KERN_ERR "TWL4030 hw params: unknown rate %d\n",
+ dev_err(codec->dev, "%s: unknown rate %d\n", __func__,
params_rate(params));
return -EINVAL;
}
@@ -1817,7 +1817,7 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
format |= TWL4030_DATA_WIDTH_32S_24W;
break;
default:
- printk(KERN_ERR "TWL4030 hw params: unknown format %d\n",
+ dev_err(codec->dev, "%s: unknown format %d\n", __func__,
params_format(params));
return -EINVAL;
}
@@ -1867,13 +1867,13 @@ static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
case 38400000:
break;
default:
- dev_err(codec->dev, "Unsupported APLL mclk: %u\n", freq);
+ dev_err(codec->dev, "Unsupported HFCLKIN: %u\n", freq);
return -EINVAL;
}
if ((freq / 1000) != twl4030->sysclk) {
dev_err(codec->dev,
- "Mismatch in APLL mclk: %u (configured: %u)\n",
+ "Mismatch in HFCLKIN: %u (configured: %u)\n",
freq, twl4030->sysclk * 1000);
return -EINVAL;
}
@@ -1983,9 +1983,9 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
* not available.
*/
if (twl4030->sysclk != 26000) {
- dev_err(codec->dev, "The board is configured for %u Hz, while"
- "the Voice interface needs 26MHz APLL mclk\n",
- twl4030->sysclk * 1000);
+ dev_err(codec->dev,
+ "%s: HFCLKIN is %u KHz, voice interface needs 26MHz\n",
+ __func__, twl4030->sysclk);
return -EINVAL;
}
@@ -1996,8 +1996,8 @@ static int twl4030_voice_startup(struct snd_pcm_substream *substream,
& TWL4030_OPT_MODE;
if (mode != TWL4030_OPTION_2) {
- printk(KERN_ERR "TWL4030 voice startup: "
- "the codec mode is not option2\n");
+ dev_err(codec->dev, "%s: the codec mode is not option2\n",
+ __func__);
return -EINVAL;
}
@@ -2038,7 +2038,7 @@ static int twl4030_voice_hw_params(struct snd_pcm_substream *substream,
mode |= TWL4030_SEL_16K;
break;
default:
- printk(KERN_ERR "TWL4030 voice hw params: unknown rate %d\n",
+ dev_err(codec->dev, "%s: unknown rate %d\n", __func__,
params_rate(params));
return -EINVAL;
}
@@ -2067,13 +2067,14 @@ static int twl4030_voice_set_dai_sysclk(struct snd_soc_dai *codec_dai,
struct twl4030_priv *twl4030 = snd_soc_codec_get_drvdata(codec);
if (freq != 26000000) {
- dev_err(codec->dev, "Unsupported APLL mclk: %u, the Voice"
- "interface needs 26MHz APLL mclk\n", freq);
+ dev_err(codec->dev,
+ "%s: HFCLKIN is %u KHz, voice interface needs 26MHz\n",
+ __func__, freq / 1000);
return -EINVAL;
}
if ((freq / 1000) != twl4030->sysclk) {
dev_err(codec->dev,
- "Mismatch in APLL mclk: %u (configured: %u)\n",
+ "Mismatch in HFCLKIN: %u (configured: %u)\n",
freq, twl4030->sysclk * 1000);
return -EINVAL;
}
@@ -2221,7 +2222,7 @@ static int twl4030_soc_probe(struct snd_soc_codec *codec)
twl4030 = kzalloc(sizeof(struct twl4030_priv), GFP_KERNEL);
if (twl4030 == NULL) {
- printk("Can not allocate memory\n");
+ dev_err(codec->dev, "Can not allocate memory\n");
return -ENOMEM;
}
snd_soc_codec_set_drvdata(codec, twl4030);
--
1.7.8.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ASoC: twl4030: Debug code cleanup
2012-02-21 7:34 [PATCH v2] ASoC: twl4030: Debug code cleanup Peter Ujfalusi
@ 2012-02-21 9:59 ` Mark Brown
0 siblings, 0 replies; 2+ messages in thread
From: Mark Brown @ 2012-02-21 9:59 UTC (permalink / raw)
To: Peter Ujfalusi; +Cc: alsa-devel, Liam Girdwood
[-- Attachment #1.1: Type: text/plain, Size: 216 bytes --]
On Tue, Feb 21, 2012 at 09:34:20AM +0200, Peter Ujfalusi wrote:
> Replace the printk(KERN_ERR* instances with dev_err in the driver.
> While we are here clean up some of the debug messages as well.
Applied, thanks.
[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
[-- Attachment #2: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-02-21 9:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-21 7:34 [PATCH v2] ASoC: twl4030: Debug code cleanup Peter Ujfalusi
2012-02-21 9:59 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.