* [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full speed
@ 2012-02-22 22:18 Nikolaus Schulz
2012-02-23 1:14 ` [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full spe Guenter Roeck
2012-02-23 1:46 ` Nikolaus Schulz
0 siblings, 2 replies; 3+ messages in thread
From: Nikolaus Schulz @ 2012-02-22 22:18 UTC (permalink / raw)
To: lm-sensors
From: Nikolaus Schulz <schulz@macnetix.de>
By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan
to full speed. In the f75375s driver, this need be done by enabling
manual fan control, plus duty mode for the F875387 chip, and then setting
the maximum duty cycle. Fix a bug where the two necessary register writes
were swapped, effectively discarding the setting to full-speed.
Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
---
drivers/hwmon/f75375s.c | 7 +++----
1 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index faf66c8..5dae122 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
@@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
case 0: /* full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
@@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
+ if (val = 0)
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
return 0;
}
--
1.7.9.1
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full spe
2012-02-22 22:18 [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full speed Nikolaus Schulz
@ 2012-02-23 1:14 ` Guenter Roeck
2012-02-23 1:46 ` Nikolaus Schulz
1 sibling, 0 replies; 3+ messages in thread
From: Guenter Roeck @ 2012-02-23 1:14 UTC (permalink / raw)
To: lm-sensors
On Wed, Feb 22, 2012 at 05:18:44PM -0500, Nikolaus Schulz wrote:
> From: Nikolaus Schulz <schulz@macnetix.de>
>
> By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan
> to full speed. In the f75375s driver, this need be done by enabling
> manual fan control, plus duty mode for the F875387 chip, and then setting
> the maximum duty cycle. Fix a bug where the two necessary register writes
> were swapped, effectively discarding the setting to full-speed.
>
> Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
> ---
> drivers/hwmon/f75375s.c | 7 +++----
> 1 files changed, 3 insertions(+), 4 deletions(-)
>
Nikolaus,
this patch modifies register write order for the other chips as well.
Does that have any impact on the other chips ? Or, in other words,
is this patch also necessary for stable ?
Thanks,
Guenter
> diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
> index faf66c8..5dae122 100644
> --- a/drivers/hwmon/f75375s.c
> +++ b/drivers/hwmon/f75375s.c
> @@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
> fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
> fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
> data->pwm[nr] = 255;
> - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
> - data->pwm[nr]);
> break;
> case 1: /* PWM */
> fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
> @@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
> case 0: /* full speed */
> fanmode |= (3 << FAN_CTRL_MODE(nr));
> data->pwm[nr] = 255;
> - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
> - data->pwm[nr]);
> break;
> case 1: /* PWM */
> fanmode |= (3 << FAN_CTRL_MODE(nr));
> @@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
>
> f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
> data->pwm_enable[nr] = val;
> + if (val = 0)
> + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
> + data->pwm[nr]);
> return 0;
> }
>
> --
> 1.7.9.1
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full spe
2012-02-22 22:18 [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full speed Nikolaus Schulz
2012-02-23 1:14 ` [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full spe Guenter Roeck
@ 2012-02-23 1:46 ` Nikolaus Schulz
1 sibling, 0 replies; 3+ messages in thread
From: Nikolaus Schulz @ 2012-02-23 1:46 UTC (permalink / raw)
To: lm-sensors
On Wed, Feb 22, 2012 at 05:14:22PM -0800, Guenter Roeck wrote:
> On Wed, Feb 22, 2012 at 05:18:44PM -0500, Nikolaus Schulz wrote:
> > From: Nikolaus Schulz <schulz@macnetix.de>
> >
> > By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan
> > to full speed. In the f75375s driver, this need be done by enabling
> > manual fan control, plus duty mode for the F875387 chip, and then setting
> > the maximum duty cycle. Fix a bug where the two necessary register writes
> > were swapped, effectively discarding the setting to full-speed.
> >
> > Signed-off-by: Nikolaus Schulz <mail@microschulz.de>
> > ---
> > drivers/hwmon/f75375s.c | 7 +++----
> > 1 files changed, 3 insertions(+), 4 deletions(-)
> >
> Nikolaus,
>
> this patch modifies register write order for the other chips as well.
> Does that have any impact on the other chips ? Or, in other words,
> is this patch also necessary for stable ?
I think so, although I have tested it only on the F75387.
(For stable kernels it needs to be backported.)
Nikolaus
> > diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
> > index faf66c8..5dae122 100644
> > --- a/drivers/hwmon/f75375s.c
> > +++ b/drivers/hwmon/f75375s.c
> > @@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
> > fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
> > fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
> > data->pwm[nr] = 255;
> > - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
> > - data->pwm[nr]);
> > break;
> > case 1: /* PWM */
> > fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
> > @@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
> > case 0: /* full speed */
> > fanmode |= (3 << FAN_CTRL_MODE(nr));
> > data->pwm[nr] = 255;
> > - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
> > - data->pwm[nr]);
> > break;
> > case 1: /* PWM */
> > fanmode |= (3 << FAN_CTRL_MODE(nr));
> > @@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
> >
> > f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
> > data->pwm_enable[nr] = val;
> > + if (val = 0)
> > + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
> > + data->pwm[nr]);
> > return 0;
> > }
> >
> > --
> > 1.7.9.1
> >
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-02-23 1:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-22 22:18 [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full speed Nikolaus Schulz
2012-02-23 1:14 ` [lm-sensors] [PATCH 1/6] hwmon: (f75375s) Fix register write order when setting fans to full spe Guenter Roeck
2012-02-23 1:46 ` Nikolaus Schulz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.