All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johannes Weiner <hannes@cmpxchg.org>
To: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Anton Blanchard <anton@au1.ibm.com>,
	Dave Hansen <haveblue@us.ibm.com>,
	linux-mm@kvack.org, Paul Mackerras <paulus@samba.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Robert Jennings <rcj@linux.vnet.ibm.com>,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH] sparsemem/bootmem: catch greater than section size allocations
Date: Tue, 28 Feb 2012 14:53:26 +0100	[thread overview]
Message-ID: <20120228135326.GE1702@cmpxchg.org> (raw)
In-Reply-To: <1330112038-18951-1-git-send-email-nacc@us.ibm.com>

On Fri, Feb 24, 2012 at 11:33:58AM -0800, Nishanth Aravamudan wrote:
> While testing AMS (Active Memory Sharing) / CMO (Cooperative Memory
> Overcommit) on powerpc, we tripped the following:
> 
> kernel BUG at mm/bootmem.c:483!
> cpu 0x0: Vector: 700 (Program Check) at [c000000000c03940]
>     pc: c000000000a62bd8: .alloc_bootmem_core+0x90/0x39c
>     lr: c000000000a64bcc: .sparse_early_usemaps_alloc_node+0x84/0x29c
>     sp: c000000000c03bc0
>    msr: 8000000000021032
>   current = 0xc000000000b0cce0
>   paca    = 0xc000000001d80000
>     pid   = 0, comm = swapper
> kernel BUG at mm/bootmem.c:483!
> enter ? for help
> [c000000000c03c80] c000000000a64bcc
> .sparse_early_usemaps_alloc_node+0x84/0x29c
> [c000000000c03d50] c000000000a64f10 .sparse_init+0x12c/0x28c
> [c000000000c03e20] c000000000a474f4 .setup_arch+0x20c/0x294
> [c000000000c03ee0] c000000000a4079c .start_kernel+0xb4/0x460
> [c000000000c03f90] c000000000009670 .start_here_common+0x1c/0x2c
> 
> This is
> 
>         BUG_ON(limit && goal + size > limit);
> 
> and after some debugging, it seems that
> 
> 	goal = 0x7ffff000000
> 	limit = 0x80000000000
> 
> and sparse_early_usemaps_alloc_node ->
> sparse_early_usemaps_alloc_pgdat_section -> alloc_bootmem_section calls
> 
> 	return alloc_bootmem_section(usemap_size() * count, section_nr);
> 
> This is on a system with 8TB available via the AMS pool, and as a quirk
> of AMS in firmware, all of that memory shows up in node 0. So, we end up
> with an allocation that will fail the goal/limit constraints. In theory,
> we could "fall-back" to alloc_bootmem_node() in
> sparse_early_usemaps_alloc_node(), but since we actually have HOTREMOVE
> defined, we'll BUG_ON() instead. A simple solution appears to be to
> disable the limit check if the size of the allocation in
> alloc_bootmem_secition exceeds the section size.

It makes sense to allow the usemaps to spill over to subsequent
sections instead of panicking, so FWIW:

Acked-by: Johannes Weiner <hannes@cmpxchg.org>

That being said, it would be good if check_usemap_section_nr() printed
the cross-dependencies between pgdats and sections when the usemaps of
a node spilled over to other sections than the ones holding the pgdat.

How about this?

---
From: Johannes Weiner <hannes@cmpxchg.org>
Subject: sparsemem/bootmem: catch greater than section size allocations fix

If alloc_bootmem_section() no longer guarantees section-locality, we
need check_usemap_section_nr() to print possible cross-dependencies
between node descriptors and the usemaps allocated through it.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
---

diff --git a/mm/sparse.c b/mm/sparse.c
index 61d7cde..9e032dc 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -359,6 +359,7 @@ static void __init sparse_early_usemaps_alloc_node(unsigned long**usemap_map,
 				continue;
 			usemap_map[pnum] = usemap;
 			usemap += size;
+			check_usemap_section_nr(nodeid, usemap_map[pnum]);
 		}
 		return;
 	}

---

Furthermore, I wonder if we can remove the sparse-specific stuff from
bootmem.c as well, as now even more so than before, calculating the
desired area is really none of bootmem's business.

Would something like this be okay?

---
From: Johannes Weiner <hannes@cmpxchg.org>
Subject: [patch] mm: remove sparsemem allocation details from the bootmem allocator

alloc_bootmem_section() derives allocation area constraints from the
specified sparsemem section.  This is a bit specific for a generic
memory allocator like bootmem, though, so move it over to sparsemem.

Since __alloc_bootmem_node() already retries failed allocations with
relaxed area constraints, the fallback code in sparsemem.c can be
removed and the code becomes a bit more compact overall.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
---
 include/linux/bootmem.h |    3 ---
 mm/bootmem.c            |   26 --------------------------
 mm/sparse.c             |   29 +++++++++--------------------
 3 files changed, 9 insertions(+), 49 deletions(-)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index ab344a5..001c248 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -135,9 +135,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
 				   int flags);
 
-extern void *alloc_bootmem_section(unsigned long size,
-				   unsigned long section_nr);
-
 #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
 extern void *alloc_remap(int nid, unsigned long size);
 #else
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 7bc0557..d34026c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -756,32 +756,6 @@ void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
 
 }
 
-#ifdef CONFIG_SPARSEMEM
-/**
- * alloc_bootmem_section - allocate boot memory from a specific section
- * @size: size of the request in bytes
- * @section_nr: sparse map section to allocate from
- *
- * Return NULL on failure.
- */
-void * __init alloc_bootmem_section(unsigned long size,
-				    unsigned long section_nr)
-{
-	bootmem_data_t *bdata;
-	unsigned long pfn, goal, limit;
-
-	pfn = section_nr_to_pfn(section_nr);
-	goal = pfn << PAGE_SHIFT;
-	if (size > BYTES_PER_SECTION)
-		limit = 0;
-	else
-		limit = section_nr_to_pfn(section_nr + 1) << PAGE_SHIFT;
-	bdata = &bootmem_node_data[early_pfn_to_nid(pfn)];
-
-	return alloc_bootmem_core(bdata, size, SMP_CACHE_BYTES, goal, limit);
-}
-#endif
-
 void * __init __alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
diff --git a/mm/sparse.c b/mm/sparse.c
index 9e032dc..ac0d5a3 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -273,10 +273,10 @@ static unsigned long *__kmalloc_section_usemap(void)
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static unsigned long * __init
 sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
-					 unsigned long count)
+					 unsigned long size)
 {
-	unsigned long section_nr;
-
+	pg_data_t *host_pgdat;
+	unsigned long goal;
 	/*
 	 * A page may contain usemaps for other sections preventing the
 	 * page being freed and making a section unremovable while
@@ -287,8 +287,9 @@ sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
 	 * from the same section as the pgdat where possible to avoid
 	 * this problem.
 	 */
-	section_nr = pfn_to_section_nr(__pa(pgdat) >> PAGE_SHIFT);
-	return alloc_bootmem_section(usemap_size() * count, section_nr);
+	goal = __pa(pgdat) & PAGE_SECTION_MASK;
+	host_pgdat = NODE_DATA(early_pfn_to_nid(goal));
+	return __alloc_bootmem_node(host_pgdat, size, SMP_CACHE_BYTES, goal);
 }
 
 static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
@@ -332,9 +333,9 @@ static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
 #else
 static unsigned long * __init
 sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
-					 unsigned long count)
+					 unsigned long size)
 {
-	return NULL;
+	return alloc_bootmem_node(pgdat, size);
 }
 
 static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
@@ -352,19 +353,7 @@ static void __init sparse_early_usemaps_alloc_node(unsigned long**usemap_map,
 	int size = usemap_size();
 
 	usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(nodeid),
-								 usemap_count);
-	if (usemap) {
-		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
-			if (!present_section_nr(pnum))
-				continue;
-			usemap_map[pnum] = usemap;
-			usemap += size;
-			check_usemap_section_nr(nodeid, usemap_map[pnum]);
-		}
-		return;
-	}
-
-	usemap = alloc_bootmem_node(NODE_DATA(nodeid), size * usemap_count);
+							  size * usemap_count);
 	if (usemap) {
 		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
 			if (!present_section_nr(pnum))
-- 
1.7.7.6

WARNING: multiple messages have this Message-ID (diff)
From: Johannes Weiner <hannes@cmpxchg.org>
To: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Dave Hansen <haveblue@us.ibm.com>,
	Anton Blanchard <anton@au1.ibm.com>,
	Paul Mackerras <paulus@samba.org>,
	Ben Herrenschmidt <benh@kernel.crashing.org>,
	Robert Jennings <rcj@linux.vnet.ibm.com>,
	linux-mm@kvack.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH] sparsemem/bootmem: catch greater than section size allocations
Date: Tue, 28 Feb 2012 14:53:26 +0100	[thread overview]
Message-ID: <20120228135326.GE1702@cmpxchg.org> (raw)
In-Reply-To: <1330112038-18951-1-git-send-email-nacc@us.ibm.com>

On Fri, Feb 24, 2012 at 11:33:58AM -0800, Nishanth Aravamudan wrote:
> While testing AMS (Active Memory Sharing) / CMO (Cooperative Memory
> Overcommit) on powerpc, we tripped the following:
> 
> kernel BUG at mm/bootmem.c:483!
> cpu 0x0: Vector: 700 (Program Check) at [c000000000c03940]
>     pc: c000000000a62bd8: .alloc_bootmem_core+0x90/0x39c
>     lr: c000000000a64bcc: .sparse_early_usemaps_alloc_node+0x84/0x29c
>     sp: c000000000c03bc0
>    msr: 8000000000021032
>   current = 0xc000000000b0cce0
>   paca    = 0xc000000001d80000
>     pid   = 0, comm = swapper
> kernel BUG at mm/bootmem.c:483!
> enter ? for help
> [c000000000c03c80] c000000000a64bcc
> .sparse_early_usemaps_alloc_node+0x84/0x29c
> [c000000000c03d50] c000000000a64f10 .sparse_init+0x12c/0x28c
> [c000000000c03e20] c000000000a474f4 .setup_arch+0x20c/0x294
> [c000000000c03ee0] c000000000a4079c .start_kernel+0xb4/0x460
> [c000000000c03f90] c000000000009670 .start_here_common+0x1c/0x2c
> 
> This is
> 
>         BUG_ON(limit && goal + size > limit);
> 
> and after some debugging, it seems that
> 
> 	goal = 0x7ffff000000
> 	limit = 0x80000000000
> 
> and sparse_early_usemaps_alloc_node ->
> sparse_early_usemaps_alloc_pgdat_section -> alloc_bootmem_section calls
> 
> 	return alloc_bootmem_section(usemap_size() * count, section_nr);
> 
> This is on a system with 8TB available via the AMS pool, and as a quirk
> of AMS in firmware, all of that memory shows up in node 0. So, we end up
> with an allocation that will fail the goal/limit constraints. In theory,
> we could "fall-back" to alloc_bootmem_node() in
> sparse_early_usemaps_alloc_node(), but since we actually have HOTREMOVE
> defined, we'll BUG_ON() instead. A simple solution appears to be to
> disable the limit check if the size of the allocation in
> alloc_bootmem_secition exceeds the section size.

It makes sense to allow the usemaps to spill over to subsequent
sections instead of panicking, so FWIW:

Acked-by: Johannes Weiner <hannes@cmpxchg.org>

That being said, it would be good if check_usemap_section_nr() printed
the cross-dependencies between pgdats and sections when the usemaps of
a node spilled over to other sections than the ones holding the pgdat.

How about this?

---
From: Johannes Weiner <hannes@cmpxchg.org>
Subject: sparsemem/bootmem: catch greater than section size allocations fix

If alloc_bootmem_section() no longer guarantees section-locality, we
need check_usemap_section_nr() to print possible cross-dependencies
between node descriptors and the usemaps allocated through it.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
---

diff --git a/mm/sparse.c b/mm/sparse.c
index 61d7cde..9e032dc 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -359,6 +359,7 @@ static void __init sparse_early_usemaps_alloc_node(unsigned long**usemap_map,
 				continue;
 			usemap_map[pnum] = usemap;
 			usemap += size;
+			check_usemap_section_nr(nodeid, usemap_map[pnum]);
 		}
 		return;
 	}

---

Furthermore, I wonder if we can remove the sparse-specific stuff from
bootmem.c as well, as now even more so than before, calculating the
desired area is really none of bootmem's business.

Would something like this be okay?

---
From: Johannes Weiner <hannes@cmpxchg.org>
Subject: [patch] mm: remove sparsemem allocation details from the bootmem allocator

alloc_bootmem_section() derives allocation area constraints from the
specified sparsemem section.  This is a bit specific for a generic
memory allocator like bootmem, though, so move it over to sparsemem.

Since __alloc_bootmem_node() already retries failed allocations with
relaxed area constraints, the fallback code in sparsemem.c can be
removed and the code becomes a bit more compact overall.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
---
 include/linux/bootmem.h |    3 ---
 mm/bootmem.c            |   26 --------------------------
 mm/sparse.c             |   29 +++++++++--------------------
 3 files changed, 9 insertions(+), 49 deletions(-)

diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index ab344a5..001c248 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -135,9 +135,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 extern int reserve_bootmem_generic(unsigned long addr, unsigned long size,
 				   int flags);
 
-extern void *alloc_bootmem_section(unsigned long size,
-				   unsigned long section_nr);
-
 #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP
 extern void *alloc_remap(int nid, unsigned long size);
 #else
diff --git a/mm/bootmem.c b/mm/bootmem.c
index 7bc0557..d34026c 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -756,32 +756,6 @@ void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size,
 
 }
 
-#ifdef CONFIG_SPARSEMEM
-/**
- * alloc_bootmem_section - allocate boot memory from a specific section
- * @size: size of the request in bytes
- * @section_nr: sparse map section to allocate from
- *
- * Return NULL on failure.
- */
-void * __init alloc_bootmem_section(unsigned long size,
-				    unsigned long section_nr)
-{
-	bootmem_data_t *bdata;
-	unsigned long pfn, goal, limit;
-
-	pfn = section_nr_to_pfn(section_nr);
-	goal = pfn << PAGE_SHIFT;
-	if (size > BYTES_PER_SECTION)
-		limit = 0;
-	else
-		limit = section_nr_to_pfn(section_nr + 1) << PAGE_SHIFT;
-	bdata = &bootmem_node_data[early_pfn_to_nid(pfn)];
-
-	return alloc_bootmem_core(bdata, size, SMP_CACHE_BYTES, goal, limit);
-}
-#endif
-
 void * __init __alloc_bootmem_node_nopanic(pg_data_t *pgdat, unsigned long size,
 				   unsigned long align, unsigned long goal)
 {
diff --git a/mm/sparse.c b/mm/sparse.c
index 9e032dc..ac0d5a3 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -273,10 +273,10 @@ static unsigned long *__kmalloc_section_usemap(void)
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static unsigned long * __init
 sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
-					 unsigned long count)
+					 unsigned long size)
 {
-	unsigned long section_nr;
-
+	pg_data_t *host_pgdat;
+	unsigned long goal;
 	/*
 	 * A page may contain usemaps for other sections preventing the
 	 * page being freed and making a section unremovable while
@@ -287,8 +287,9 @@ sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
 	 * from the same section as the pgdat where possible to avoid
 	 * this problem.
 	 */
-	section_nr = pfn_to_section_nr(__pa(pgdat) >> PAGE_SHIFT);
-	return alloc_bootmem_section(usemap_size() * count, section_nr);
+	goal = __pa(pgdat) & PAGE_SECTION_MASK;
+	host_pgdat = NODE_DATA(early_pfn_to_nid(goal));
+	return __alloc_bootmem_node(host_pgdat, size, SMP_CACHE_BYTES, goal);
 }
 
 static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
@@ -332,9 +333,9 @@ static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
 #else
 static unsigned long * __init
 sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
-					 unsigned long count)
+					 unsigned long size)
 {
-	return NULL;
+	return alloc_bootmem_node(pgdat, size);
 }
 
 static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
@@ -352,19 +353,7 @@ static void __init sparse_early_usemaps_alloc_node(unsigned long**usemap_map,
 	int size = usemap_size();
 
 	usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(nodeid),
-								 usemap_count);
-	if (usemap) {
-		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
-			if (!present_section_nr(pnum))
-				continue;
-			usemap_map[pnum] = usemap;
-			usemap += size;
-			check_usemap_section_nr(nodeid, usemap_map[pnum]);
-		}
-		return;
-	}
-
-	usemap = alloc_bootmem_node(NODE_DATA(nodeid), size * usemap_count);
+							  size * usemap_count);
 	if (usemap) {
 		for (pnum = pnum_begin; pnum < pnum_end; pnum++) {
 			if (!present_section_nr(pnum))
-- 
1.7.7.6

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-02-28 14:17 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-02-24 19:33 [PATCH] sparsemem/bootmem: catch greater than section size allocations Nishanth Aravamudan
2012-02-24 19:33 ` Nishanth Aravamudan
2012-02-28 13:53 ` Johannes Weiner [this message]
2012-02-28 13:53   ` Johannes Weiner
2012-02-28 20:11   ` Nishanth Aravamudan
2012-02-28 20:11     ` Nishanth Aravamudan
2012-02-29  9:17     ` Johannes Weiner
2012-02-29  9:17       ` Johannes Weiner
2012-02-28 15:47 ` Mel Gorman
2012-02-28 15:47   ` Mel Gorman
2012-02-29 18:12   ` [PATCH v2] bootmem/sparsemem: remove limit constraint in alloc_bootmem_section Nishanth Aravamudan
2012-02-29 18:12     ` Nishanth Aravamudan
2012-02-29 18:45     ` Johannes Weiner
2012-02-29 18:45       ` Johannes Weiner
2012-02-29 23:28     ` Andrew Morton
2012-02-29 23:28       ` Andrew Morton
2012-03-01  0:03       ` Nishanth Aravamudan
2012-03-01  0:03         ` Nishanth Aravamudan
2012-03-01 23:12       ` Nishanth Aravamudan
2012-03-01 23:12         ` Nishanth Aravamudan
2012-03-01 11:42     ` Mel Gorman
2012-03-01 11:42       ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120228135326.GE1702@cmpxchg.org \
    --to=hannes@cmpxchg.org \
    --cc=akpm@linux-foundation.org \
    --cc=anton@au1.ibm.com \
    --cc=haveblue@us.ibm.com \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nacc@us.ibm.com \
    --cc=paulus@samba.org \
    --cc=rcj@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.