From: James Hogan <james@albanarts.com>
To: Ravi Kumar V <kumarrav@codeaurora.org>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>,
Jarod Wilson <jarod@redhat.com>,
Anssi Hannula <anssi.hannula@iki.fi>,
"Juan J. Garcia de Soria" <skandalfo@gmail.com>,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
tsoni@codeaurora.org, davidb@codeaurora.org,
bryanh@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.
Date: Tue, 28 Feb 2012 20:29:45 +0000 [thread overview]
Message-ID: <20120228202944.GA9373@balrog> (raw)
In-Reply-To: <1330408300-21939-1-git-send-email-kumarrav@codeaurora.org>
On Tue, Feb 28, 2012 at 11:21:40AM +0530, Ravi Kumar V wrote:
> Adds GPIO based IR Receiver driver. It decodes signals using decoders
> available in rc framework.
>
> Signed-off-by: Ravi Kumar V <kumarrav@codeaurora.org>
Looks good to me (but I'm no expert).
Cheers
James
> ---
> drivers/media/rc/Kconfig | 9 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/gpio-ir-recv.c | 205 +++++++++++++++++++++++++++++++++++++++
> include/media/gpio-ir-recv.h | 22 ++++
> 4 files changed, 237 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/rc/gpio-ir-recv.c
> create mode 100644 include/media/gpio-ir-recv.h
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index aeb7f43..6f63ded 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -256,4 +256,13 @@ config RC_LOOPBACK
> To compile this driver as a module, choose M here: the module will
> be called rc_loopback.
>
> +config IR_GPIO_CIR
> + tristate "GPIO IR remote control"
> + depends on RC_CORE
> + ---help---
> + Say Y if you want to use GPIO based IR Receiver.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called gpio-ir-recv.
> +
> endif #RC_CORE
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 2156e78..9b3568e 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
> obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
> obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
> +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
> new file mode 100644
> index 0000000..6744479
> --- /dev/null
> +++ b/drivers/media/rc/gpio-ir-recv.c
> @@ -0,0 +1,205 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/irq.h>
> +#include <media/rc-core.h>
> +#include <media/gpio-ir-recv.h>
> +
> +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
> +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
> +
> +struct gpio_rc_dev {
> + struct rc_dev *rcdev;
> + unsigned int gpio_nr;
> + bool active_low;
> +};
> +
> +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
> +{
> + struct gpio_rc_dev *gpio_dev = dev_id;
> + unsigned int gval;
> + int rc = 0;
> + enum raw_event_type type = IR_SPACE;
> +
> + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
> +
> + if (gval < 0)
> + goto err_get_value;
> +
> + if (gpio_dev->active_low)
> + gval = !gval;
> +
> + if (gval == 1)
> + type = IR_PULSE;
> +
> + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
> + if (rc < 0)
> + goto err_get_value;
> +
> + ir_raw_event_handle(gpio_dev->rcdev);
> +
> +err_get_value:
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev;
> + struct rc_dev *rcdev;
> + const struct gpio_ir_recv_platform_data *pdata =
> + pdev->dev.platform_data;
> + int rc;
> +
> + if (!pdata)
> + return -EINVAL;
> +
> + if (pdata->gpio_nr < 0)
> + return -EINVAL;
> +
> + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
> + if (!gpio_dev)
> + return -ENOMEM;
> +
> + rcdev = rc_allocate_device();
> + if (!rcdev) {
> + rc = -ENOMEM;
> + goto err_allocate_device;
> + }
> +
> + rcdev->driver_type = RC_DRIVER_IR_RAW;
> + rcdev->allowed_protos = RC_TYPE_ALL;
> + rcdev->input_name = GPIO_IR_DEVICE_NAME;
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->driver_name = GPIO_IR_DRIVER_NAME;
> + rcdev->map_name = RC_MAP_EMPTY;
> +
> + gpio_dev->rcdev = rcdev;
> + gpio_dev->gpio_nr = pdata->gpio_nr;
> + gpio_dev->active_low = pdata->active_low;
> +
> + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
> + if (rc < 0)
> + goto err_gpio_request;
> + rc = gpio_direction_input(pdata->gpio_nr);
> + if (rc < 0)
> + goto err_gpio_direction_input;
> +
> + rc = rc_register_device(rcdev);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "failed to register rc device\n");
> + goto err_register_rc_device;
> + }
> +
> + platform_set_drvdata(pdev, gpio_dev);
> +
> + rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr),
> + gpio_ir_recv_irq,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + "gpio-ir-recv-irq", gpio_dev);
> + if (rc < 0)
> + goto err_request_irq;
> +
> + return 0;
> +
> +err_request_irq:
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(rcdev);
> +err_register_rc_device:
> +err_gpio_direction_input:
> + gpio_free(pdata->gpio_nr);
> +err_gpio_request:
> + rc_free_device(rcdev);
> + rcdev = NULL;
> +err_allocate_device:
> + kfree(gpio_dev);
> + return rc;
> +}
> +
> +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(gpio_dev->rcdev);
> + gpio_free(gpio_dev->gpio_nr);
> + rc_free_device(gpio_dev->rcdev);
> + kfree(gpio_dev);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int gpio_ir_recv_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + else
> + disable_irq(gpio_to_irq(gpio_dev->gpio_nr));
> +
> + return 0;
> +}
> +
> +static int gpio_ir_recv_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + else
> + enable_irq(gpio_to_irq(gpio_dev->gpio_nr));
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops gpio_ir_recv_pm_ops = {
> + .suspend = gpio_ir_recv_suspend,
> + .resume = gpio_ir_recv_resume,
> +};
> +#endif
> +
> +static struct platform_driver gpio_ir_recv_driver = {
> + .probe = gpio_ir_recv_probe,
> + .remove = __devexit_p(gpio_ir_recv_remove),
> + .driver = {
> + .name = GPIO_IR_DRIVER_NAME,
> + .owner = THIS_MODULE,
> +#ifdef CONFIG_PM
> + .pm = &gpio_ir_recv_pm_ops,
> +#endif
> + },
> +};
> +
> +static int __init gpio_ir_recv_init(void)
> +{
> + return platform_driver_register(&gpio_ir_recv_driver);
> +}
> +module_init(gpio_ir_recv_init);
> +
> +static void __exit gpio_ir_recv_exit(void)
> +{
> + platform_driver_unregister(&gpio_ir_recv_driver);
> +}
> +module_exit(gpio_ir_recv_exit);
> +
> +MODULE_DESCRIPTION("GPIO IR Receiver driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
> new file mode 100644
> index 0000000..61a7fbb
> --- /dev/null
> +++ b/include/media/gpio-ir-recv.h
> @@ -0,0 +1,22 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __GPIO_IR_RECV_H__
> +#define __GPIO_IR_RECV_H__
> +
> +struct gpio_ir_recv_platform_data {
> + unsigned int gpio_nr;
> + bool active_low;
> +};
> +
> +#endif /* __GPIO_IR_RECV_H__ */
> +
> --
> Sent by a consultant of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
WARNING: multiple messages have this Message-ID (diff)
From: james@albanarts.com (James Hogan)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver.
Date: Tue, 28 Feb 2012 20:29:45 +0000 [thread overview]
Message-ID: <20120228202944.GA9373@balrog> (raw)
In-Reply-To: <1330408300-21939-1-git-send-email-kumarrav@codeaurora.org>
On Tue, Feb 28, 2012 at 11:21:40AM +0530, Ravi Kumar V wrote:
> Adds GPIO based IR Receiver driver. It decodes signals using decoders
> available in rc framework.
>
> Signed-off-by: Ravi Kumar V <kumarrav@codeaurora.org>
Looks good to me (but I'm no expert).
Cheers
James
> ---
> drivers/media/rc/Kconfig | 9 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/gpio-ir-recv.c | 205 +++++++++++++++++++++++++++++++++++++++
> include/media/gpio-ir-recv.h | 22 ++++
> 4 files changed, 237 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/rc/gpio-ir-recv.c
> create mode 100644 include/media/gpio-ir-recv.h
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index aeb7f43..6f63ded 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -256,4 +256,13 @@ config RC_LOOPBACK
> To compile this driver as a module, choose M here: the module will
> be called rc_loopback.
>
> +config IR_GPIO_CIR
> + tristate "GPIO IR remote control"
> + depends on RC_CORE
> + ---help---
> + Say Y if you want to use GPIO based IR Receiver.
> +
> + To compile this driver as a module, choose M here: the module will
> + be called gpio-ir-recv.
> +
> endif #RC_CORE
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index 2156e78..9b3568e 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_IR_REDRAT3) += redrat3.o
> obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
> obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
> obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
> +obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
> diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c
> new file mode 100644
> index 0000000..6744479
> --- /dev/null
> +++ b/drivers/media/rc/gpio-ir-recv.c
> @@ -0,0 +1,205 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/slab.h>
> +#include <linux/platform_device.h>
> +#include <linux/irq.h>
> +#include <media/rc-core.h>
> +#include <media/gpio-ir-recv.h>
> +
> +#define GPIO_IR_DRIVER_NAME "gpio-rc-recv"
> +#define GPIO_IR_DEVICE_NAME "gpio_ir_recv"
> +
> +struct gpio_rc_dev {
> + struct rc_dev *rcdev;
> + unsigned int gpio_nr;
> + bool active_low;
> +};
> +
> +static irqreturn_t gpio_ir_recv_irq(int irq, void *dev_id)
> +{
> + struct gpio_rc_dev *gpio_dev = dev_id;
> + unsigned int gval;
> + int rc = 0;
> + enum raw_event_type type = IR_SPACE;
> +
> + gval = gpio_get_value_cansleep(gpio_dev->gpio_nr);
> +
> + if (gval < 0)
> + goto err_get_value;
> +
> + if (gpio_dev->active_low)
> + gval = !gval;
> +
> + if (gval == 1)
> + type = IR_PULSE;
> +
> + rc = ir_raw_event_store_edge(gpio_dev->rcdev, type);
> + if (rc < 0)
> + goto err_get_value;
> +
> + ir_raw_event_handle(gpio_dev->rcdev);
> +
> +err_get_value:
> + return IRQ_HANDLED;
> +}
> +
> +static int __devinit gpio_ir_recv_probe(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev;
> + struct rc_dev *rcdev;
> + const struct gpio_ir_recv_platform_data *pdata =
> + pdev->dev.platform_data;
> + int rc;
> +
> + if (!pdata)
> + return -EINVAL;
> +
> + if (pdata->gpio_nr < 0)
> + return -EINVAL;
> +
> + gpio_dev = kzalloc(sizeof(struct gpio_rc_dev), GFP_KERNEL);
> + if (!gpio_dev)
> + return -ENOMEM;
> +
> + rcdev = rc_allocate_device();
> + if (!rcdev) {
> + rc = -ENOMEM;
> + goto err_allocate_device;
> + }
> +
> + rcdev->driver_type = RC_DRIVER_IR_RAW;
> + rcdev->allowed_protos = RC_TYPE_ALL;
> + rcdev->input_name = GPIO_IR_DEVICE_NAME;
> + rcdev->input_id.bustype = BUS_HOST;
> + rcdev->driver_name = GPIO_IR_DRIVER_NAME;
> + rcdev->map_name = RC_MAP_EMPTY;
> +
> + gpio_dev->rcdev = rcdev;
> + gpio_dev->gpio_nr = pdata->gpio_nr;
> + gpio_dev->active_low = pdata->active_low;
> +
> + rc = gpio_request(pdata->gpio_nr, "gpio-ir-recv");
> + if (rc < 0)
> + goto err_gpio_request;
> + rc = gpio_direction_input(pdata->gpio_nr);
> + if (rc < 0)
> + goto err_gpio_direction_input;
> +
> + rc = rc_register_device(rcdev);
> + if (rc < 0) {
> + dev_err(&pdev->dev, "failed to register rc device\n");
> + goto err_register_rc_device;
> + }
> +
> + platform_set_drvdata(pdev, gpio_dev);
> +
> + rc = request_any_context_irq(gpio_to_irq(pdata->gpio_nr),
> + gpio_ir_recv_irq,
> + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
> + "gpio-ir-recv-irq", gpio_dev);
> + if (rc < 0)
> + goto err_request_irq;
> +
> + return 0;
> +
> +err_request_irq:
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(rcdev);
> +err_register_rc_device:
> +err_gpio_direction_input:
> + gpio_free(pdata->gpio_nr);
> +err_gpio_request:
> + rc_free_device(rcdev);
> + rcdev = NULL;
> +err_allocate_device:
> + kfree(gpio_dev);
> + return rc;
> +}
> +
> +static int __devexit gpio_ir_recv_remove(struct platform_device *pdev)
> +{
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + free_irq(gpio_to_irq(gpio_dev->gpio_nr), gpio_dev);
> + platform_set_drvdata(pdev, NULL);
> + rc_unregister_device(gpio_dev->rcdev);
> + gpio_free(gpio_dev->gpio_nr);
> + rc_free_device(gpio_dev->rcdev);
> + kfree(gpio_dev);
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int gpio_ir_recv_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev))
> + enable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + else
> + disable_irq(gpio_to_irq(gpio_dev->gpio_nr));
> +
> + return 0;
> +}
> +
> +static int gpio_ir_recv_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct gpio_rc_dev *gpio_dev = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(dev))
> + disable_irq_wake(gpio_to_irq(gpio_dev->gpio_nr));
> + else
> + enable_irq(gpio_to_irq(gpio_dev->gpio_nr));
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops gpio_ir_recv_pm_ops = {
> + .suspend = gpio_ir_recv_suspend,
> + .resume = gpio_ir_recv_resume,
> +};
> +#endif
> +
> +static struct platform_driver gpio_ir_recv_driver = {
> + .probe = gpio_ir_recv_probe,
> + .remove = __devexit_p(gpio_ir_recv_remove),
> + .driver = {
> + .name = GPIO_IR_DRIVER_NAME,
> + .owner = THIS_MODULE,
> +#ifdef CONFIG_PM
> + .pm = &gpio_ir_recv_pm_ops,
> +#endif
> + },
> +};
> +
> +static int __init gpio_ir_recv_init(void)
> +{
> + return platform_driver_register(&gpio_ir_recv_driver);
> +}
> +module_init(gpio_ir_recv_init);
> +
> +static void __exit gpio_ir_recv_exit(void)
> +{
> + platform_driver_unregister(&gpio_ir_recv_driver);
> +}
> +module_exit(gpio_ir_recv_exit);
> +
> +MODULE_DESCRIPTION("GPIO IR Receiver driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/media/gpio-ir-recv.h b/include/media/gpio-ir-recv.h
> new file mode 100644
> index 0000000..61a7fbb
> --- /dev/null
> +++ b/include/media/gpio-ir-recv.h
> @@ -0,0 +1,22 @@
> +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef __GPIO_IR_RECV_H__
> +#define __GPIO_IR_RECV_H__
> +
> +struct gpio_ir_recv_platform_data {
> + unsigned int gpio_nr;
> + bool active_low;
> +};
> +
> +#endif /* __GPIO_IR_RECV_H__ */
> +
> --
> Sent by a consultant of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2012-02-28 20:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-28 5:51 [PATCH v3 1/1] rc: Add support for GPIO based IR Receiver driver Ravi Kumar V
2012-02-28 5:51 ` Ravi Kumar V
2012-02-28 20:29 ` James Hogan [this message]
2012-02-28 20:29 ` James Hogan
2012-02-29 5:57 ` Ravi Kumar V
2012-02-29 5:57 ` Ravi Kumar V
2012-02-29 12:24 ` Trilok Soni
2012-02-29 12:24 ` Trilok Soni
2012-03-02 7:02 ` Trilok Soni
2012-03-02 7:02 ` Trilok Soni
2012-03-23 20:22 ` Trilok Soni
2012-03-23 20:22 ` Trilok Soni
2012-04-23 20:11 ` Jarod Wilson
2012-04-23 20:11 ` Jarod Wilson
2012-06-12 12:56 ` Ravi Kumar V
2012-06-12 12:56 ` Ravi Kumar V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120228202944.GA9373@balrog \
--to=james@albanarts.com \
--cc=anssi.hannula@iki.fi \
--cc=bryanh@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=jarod@redhat.com \
--cc=kumarrav@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=skandalfo@gmail.com \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.