From: "Heiko Stübner" <heiko@sntech.de>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, ben-linux@fluff.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
Date: Tue, 28 Feb 2012 22:18:08 +0100 [thread overview]
Message-ID: <201202282218.09602.heiko@sntech.de> (raw)
In-Reply-To: <1329346545-16373-10-git-send-email-kgene.kim@samsung.com>
Am Mittwoch 15 Februar 2012, 23:55:43 schrieb Kukjin Kim:
> This patch moves S3C2416 stuff into mach-s3c24xx/ directory
> so that we can merge the s3c24 series' directories to the
> just one mach-s3c24xx/ directory.
>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
On S3C2416 hardware
Tested-by: Heiko Stuebner <heiko@sntech.de>
> ---
> arch/arm/mach-s3c2416/Kconfig | 46
> ------------------- arch/arm/mach-s3c2416/Makefile |
> 10 ----
> arch/arm/mach-s3c24xx/Kconfig | 47
> ++++++++++++++++++++ arch/arm/mach-s3c24xx/Makefile |
> 9 ++++
> .../clock.c => mach-s3c24xx/clock-s3c2416.c} | 0
> .../irq.c => mach-s3c24xx/irq-s3c2416.c} | 0
> .../{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c | 0
> .../pm.c => mach-s3c24xx/pm-s3c2416.c} | 0
> arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c | 0
> .../setup-sdhci-gpio.c | 0
> 10 files changed, 56 insertions(+), 56 deletions(-)
> rename arch/arm/{mach-s3c2416/clock.c => mach-s3c24xx/clock-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416/irq.c => mach-s3c24xx/irq-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c
> (100%) rename arch/arm/{mach-s3c2416/pm.c => mach-s3c24xx/pm-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c (100%)
> rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/setup-sdhci-gpio.c (100%)
>
> diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
> index 53d5c2b..faaa289 100644
> --- a/arch/arm/mach-s3c2416/Kconfig
> +++ b/arch/arm/mach-s3c2416/Kconfig
> @@ -7,54 +7,8 @@
> # note, this also supports the S3C2450 which is so similar it has the same
> # ID code as the S3C2416.
>
> -config CPU_S3C2416
> - bool
> - depends on ARCH_S3C24XX
> - select CPU_ARM926T
> - select S3C2416_DMA if S3C2410_DMA
> - select CPU_LLSERIAL_S3C2440
> - select SAMSUNG_CLKSRC
> - select S3C2443_CLOCK
> - help
> - Support for the S3C2416 SoC from the S3C24XX line
> -
> config S3C2416_DMA
> bool
> depends on CPU_S3C2416
> help
> Internal config node for S3C2416 DMA support
> -
> -config S3C2416_PM
> - bool
> - select S3C2412_PM_SLEEP
> - help
> - Internal config node to apply S3C2416 power management
> -
> -config S3C2416_SETUP_SDHCI
> - bool
> - select S3C2416_SETUP_SDHCI_GPIO
> - help
> - Internal helper functions for S3C2416 based SDHCI systems
> -
> -config S3C2416_SETUP_SDHCI_GPIO
> - bool
> - help
> - Common setup code for SDHCI gpio.
> -
> -menu "S3C2416 Machines"
> -
> -config MACH_SMDK2416
> - bool "SMDK2416"
> - select CPU_S3C2416
> - select MACH_SMDK
> - select S3C_DEV_FB
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_NAND
> - select S3C_DEV_USB_HOST
> - select S3C2416_SETUP_SDHCI
> - select S3C2416_PM if PM
> - help
> - Say Y here if you are using an SMDK2416
> -
> -endmenu
> diff --git a/arch/arm/mach-s3c2416/Makefile
> b/arch/arm/mach-s3c2416/Makefile index ca0cd22..3299f19 100644
> --- a/arch/arm/mach-s3c2416/Makefile
> +++ b/arch/arm/mach-s3c2416/Makefile
> @@ -9,14 +9,4 @@ obj-m :=
> obj-n :=
> obj- :=
>
> -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
> -obj-$(CONFIG_CPU_S3C2416) += irq.o
> -obj-$(CONFIG_S3C2416_PM) += pm.o
> #obj-$(CONFIG_S3C2416_DMA) += dma.o
> -
> -# Device setup
> -obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> -
> -# Machine support
> -
> -obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index c130d5f..69529dd 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -35,6 +35,18 @@ config CPU_S3C2412
> help
> Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
>
> +config CPU_S3C2416
> + bool "SAMSUNG S3C2416/S3C2450"
> + depends on ARCH_S3C24XX
> + select CPU_ARM926T
> + select CPU_LLSERIAL_S3C2440
> + select SAMSUNG_CLKSRC
> + select S3C2443_CLOCK
> + select S3C2416_DMA if S3C24XX_DMA
> + select S3C2416_PM if PM
> + help
> + Support for the S3C2416 SoC from the S3C24XX line
> +
> if CPU_S3C2410
>
> config S3C2410_DMA
> @@ -247,6 +259,41 @@ config MACH_VSTMS
>
> endif # CPU_S3C2412
>
> +if CPU_S3C2416
> +
> +config S3C2416_PM
> + bool
> + select S3C2412_PM_SLEEP
> + help
> + Internal config node to apply S3C2416 power management
> +
> +config S3C2416_SETUP_SDHCI
> + bool
> + select S3C2416_SETUP_SDHCI_GPIO
> + help
> + Internal helper functions for S3C2416 based SDHCI systems
> +
> +config S3C2416_SETUP_SDHCI_GPIO
> + bool
> + help
> + Common setup code for SDHCI gpio.
> +
> +comment "S3C2416 Boards"
> +
> +config MACH_SMDK2416
> + bool "SMDK2416"
> + select MACH_SMDK
> + select S3C_DEV_FB
> + select S3C_DEV_HSMMC
> + select S3C_DEV_HSMMC1
> + select S3C_DEV_NAND
> + select S3C_DEV_USB_HOST
> + select S3C2416_SETUP_SDHCI
> + help
> + Say Y here if you are using an SMDK2416
> +
> +endif # CPU_S3C2416
> +
> endmenu # SAMSUNG S3C24XX SoCs Support
>
> endif # ARCH_S3C24XX
> diff --git a/arch/arm/mach-s3c24xx/Makefile
> b/arch/arm/mach-s3c24xx/Makefile index f5af4af..789aa5c 100644
> --- a/arch/arm/mach-s3c24xx/Makefile
> +++ b/arch/arm/mach-s3c24xx/Makefile
> @@ -23,6 +23,9 @@ obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
> obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
> obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
>
> +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
> +obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
> +
> #
> # machine support
> # following is ordered alphabetically by option text.
> @@ -45,6 +48,8 @@ obj-$(CONFIG_MACH_JIVE) += mach-jive.o
> obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
> obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
>
> +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
> +
> # common bits of machine support
>
> obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
> @@ -52,3 +57,7 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
> # machine additions
>
> obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
> +
> +# device setup
> +
> +obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> diff --git a/arch/arm/mach-s3c2416/clock.c
> b/arch/arm/mach-s3c24xx/clock-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/clock.c
> rename to arch/arm/mach-s3c24xx/clock-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/irq.c
> b/arch/arm/mach-s3c24xx/irq-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/irq.c
> rename to arch/arm/mach-s3c24xx/irq-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c
> b/arch/arm/mach-s3c24xx/mach-smdk2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/mach-smdk2416.c
> rename to arch/arm/mach-s3c24xx/mach-smdk2416.c
> diff --git a/arch/arm/mach-s3c2416/pm.c
> b/arch/arm/mach-s3c24xx/pm-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/pm.c
> rename to arch/arm/mach-s3c24xx/pm-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/s3c2416.c
> b/arch/arm/mach-s3c24xx/s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/s3c2416.c
> rename to arch/arm/mach-s3c24xx/s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c similarity index 100%
> rename from arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> rename to arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/
Date: Tue, 28 Feb 2012 22:18:08 +0100 [thread overview]
Message-ID: <201202282218.09602.heiko@sntech.de> (raw)
In-Reply-To: <1329346545-16373-10-git-send-email-kgene.kim@samsung.com>
Am Mittwoch 15 Februar 2012, 23:55:43 schrieb Kukjin Kim:
> This patch moves S3C2416 stuff into mach-s3c24xx/ directory
> so that we can merge the s3c24 series' directories to the
> just one mach-s3c24xx/ directory.
>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
On S3C2416 hardware
Tested-by: Heiko Stuebner <heiko@sntech.de>
> ---
> arch/arm/mach-s3c2416/Kconfig | 46
> ------------------- arch/arm/mach-s3c2416/Makefile |
> 10 ----
> arch/arm/mach-s3c24xx/Kconfig | 47
> ++++++++++++++++++++ arch/arm/mach-s3c24xx/Makefile |
> 9 ++++
> .../clock.c => mach-s3c24xx/clock-s3c2416.c} | 0
> .../irq.c => mach-s3c24xx/irq-s3c2416.c} | 0
> .../{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c | 0
> .../pm.c => mach-s3c24xx/pm-s3c2416.c} | 0
> arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c | 0
> .../setup-sdhci-gpio.c | 0
> 10 files changed, 56 insertions(+), 56 deletions(-)
> rename arch/arm/{mach-s3c2416/clock.c => mach-s3c24xx/clock-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416/irq.c => mach-s3c24xx/irq-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/mach-smdk2416.c
> (100%) rename arch/arm/{mach-s3c2416/pm.c => mach-s3c24xx/pm-s3c2416.c}
> (100%) rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/s3c2416.c (100%)
> rename arch/arm/{mach-s3c2416 => mach-s3c24xx}/setup-sdhci-gpio.c (100%)
>
> diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
> index 53d5c2b..faaa289 100644
> --- a/arch/arm/mach-s3c2416/Kconfig
> +++ b/arch/arm/mach-s3c2416/Kconfig
> @@ -7,54 +7,8 @@
> # note, this also supports the S3C2450 which is so similar it has the same
> # ID code as the S3C2416.
>
> -config CPU_S3C2416
> - bool
> - depends on ARCH_S3C24XX
> - select CPU_ARM926T
> - select S3C2416_DMA if S3C2410_DMA
> - select CPU_LLSERIAL_S3C2440
> - select SAMSUNG_CLKSRC
> - select S3C2443_CLOCK
> - help
> - Support for the S3C2416 SoC from the S3C24XX line
> -
> config S3C2416_DMA
> bool
> depends on CPU_S3C2416
> help
> Internal config node for S3C2416 DMA support
> -
> -config S3C2416_PM
> - bool
> - select S3C2412_PM_SLEEP
> - help
> - Internal config node to apply S3C2416 power management
> -
> -config S3C2416_SETUP_SDHCI
> - bool
> - select S3C2416_SETUP_SDHCI_GPIO
> - help
> - Internal helper functions for S3C2416 based SDHCI systems
> -
> -config S3C2416_SETUP_SDHCI_GPIO
> - bool
> - help
> - Common setup code for SDHCI gpio.
> -
> -menu "S3C2416 Machines"
> -
> -config MACH_SMDK2416
> - bool "SMDK2416"
> - select CPU_S3C2416
> - select MACH_SMDK
> - select S3C_DEV_FB
> - select S3C_DEV_HSMMC
> - select S3C_DEV_HSMMC1
> - select S3C_DEV_NAND
> - select S3C_DEV_USB_HOST
> - select S3C2416_SETUP_SDHCI
> - select S3C2416_PM if PM
> - help
> - Say Y here if you are using an SMDK2416
> -
> -endmenu
> diff --git a/arch/arm/mach-s3c2416/Makefile
> b/arch/arm/mach-s3c2416/Makefile index ca0cd22..3299f19 100644
> --- a/arch/arm/mach-s3c2416/Makefile
> +++ b/arch/arm/mach-s3c2416/Makefile
> @@ -9,14 +9,4 @@ obj-m :=
> obj-n :=
> obj- :=
>
> -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
> -obj-$(CONFIG_CPU_S3C2416) += irq.o
> -obj-$(CONFIG_S3C2416_PM) += pm.o
> #obj-$(CONFIG_S3C2416_DMA) += dma.o
> -
> -# Device setup
> -obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> -
> -# Machine support
> -
> -obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index c130d5f..69529dd 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -35,6 +35,18 @@ config CPU_S3C2412
> help
> Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
>
> +config CPU_S3C2416
> + bool "SAMSUNG S3C2416/S3C2450"
> + depends on ARCH_S3C24XX
> + select CPU_ARM926T
> + select CPU_LLSERIAL_S3C2440
> + select SAMSUNG_CLKSRC
> + select S3C2443_CLOCK
> + select S3C2416_DMA if S3C24XX_DMA
> + select S3C2416_PM if PM
> + help
> + Support for the S3C2416 SoC from the S3C24XX line
> +
> if CPU_S3C2410
>
> config S3C2410_DMA
> @@ -247,6 +259,41 @@ config MACH_VSTMS
>
> endif # CPU_S3C2412
>
> +if CPU_S3C2416
> +
> +config S3C2416_PM
> + bool
> + select S3C2412_PM_SLEEP
> + help
> + Internal config node to apply S3C2416 power management
> +
> +config S3C2416_SETUP_SDHCI
> + bool
> + select S3C2416_SETUP_SDHCI_GPIO
> + help
> + Internal helper functions for S3C2416 based SDHCI systems
> +
> +config S3C2416_SETUP_SDHCI_GPIO
> + bool
> + help
> + Common setup code for SDHCI gpio.
> +
> +comment "S3C2416 Boards"
> +
> +config MACH_SMDK2416
> + bool "SMDK2416"
> + select MACH_SMDK
> + select S3C_DEV_FB
> + select S3C_DEV_HSMMC
> + select S3C_DEV_HSMMC1
> + select S3C_DEV_NAND
> + select S3C_DEV_USB_HOST
> + select S3C2416_SETUP_SDHCI
> + help
> + Say Y here if you are using an SMDK2416
> +
> +endif # CPU_S3C2416
> +
> endmenu # SAMSUNG S3C24XX SoCs Support
>
> endif # ARCH_S3C24XX
> diff --git a/arch/arm/mach-s3c24xx/Makefile
> b/arch/arm/mach-s3c24xx/Makefile index f5af4af..789aa5c 100644
> --- a/arch/arm/mach-s3c24xx/Makefile
> +++ b/arch/arm/mach-s3c24xx/Makefile
> @@ -23,6 +23,9 @@ obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
> obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
> obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
>
> +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
> +obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
> +
> #
> # machine support
> # following is ordered alphabetically by option text.
> @@ -45,6 +48,8 @@ obj-$(CONFIG_MACH_JIVE) += mach-jive.o
> obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
> obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
>
> +obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
> +
> # common bits of machine support
>
> obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
> @@ -52,3 +57,7 @@ obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
> # machine additions
>
> obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
> +
> +# device setup
> +
> +obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
> diff --git a/arch/arm/mach-s3c2416/clock.c
> b/arch/arm/mach-s3c24xx/clock-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/clock.c
> rename to arch/arm/mach-s3c24xx/clock-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/irq.c
> b/arch/arm/mach-s3c24xx/irq-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/irq.c
> rename to arch/arm/mach-s3c24xx/irq-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c
> b/arch/arm/mach-s3c24xx/mach-smdk2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/mach-smdk2416.c
> rename to arch/arm/mach-s3c24xx/mach-smdk2416.c
> diff --git a/arch/arm/mach-s3c2416/pm.c
> b/arch/arm/mach-s3c24xx/pm-s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/pm.c
> rename to arch/arm/mach-s3c24xx/pm-s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/s3c2416.c
> b/arch/arm/mach-s3c24xx/s3c2416.c similarity index 100%
> rename from arch/arm/mach-s3c2416/s3c2416.c
> rename to arch/arm/mach-s3c24xx/s3c2416.c
> diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> b/arch/arm/mach-s3c24xx/setup-sdhci-gpio.c similarity index 100%
> rename from arch/arm/mach-s3c2416/setup-sdhci-gpio.c
> rename to arch/arm/mach-s3c24xx/setup-sdhci-gpio.c
next prev parent reply other threads:[~2012-02-28 21:18 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-15 22:55 [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 01/12] ARM: S3C24XX: remove unused spi gpio setup functions Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 02/12] ARM: S3C24XX: move spi-s3c24xx platdata out of mach Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 03/12] ARM: S3C24XX: Remove extern declaration of clk_msysclk Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 04/12] ARM: S3C24XX: move common S3C2443 clock definitions to clock.h Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 05/12] ARM: S3C2410: move s3c2410_baseclk_add " Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 06/12] ARM: S3C24XX: change the ARCH_S3C2410 to ARCH_S3C24XX Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-16 9:21 ` Felipe Balbi
2012-02-16 9:21 ` Felipe Balbi
2012-02-19 22:53 ` Florian Tobias Schandinat
2012-02-19 22:53 ` Florian Tobias Schandinat
2012-02-28 11:44 ` Wim Van Sebroeck
2012-02-15 22:55 ` [PATCH 07/12] ARM: S3C2410: move mach-s3c2410/* into mach-s3c24xx/ Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 08/12] ARM: S3C2412: move mach-s3c2412/* into mach/s3c24xx/ Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-28 21:34 ` [PATCH] Move S3C2412_PM_SLEEP to common platform code Heiko Stübner
2012-02-28 21:34 ` Heiko Stübner
2012-03-01 4:10 ` Kukjin Kim
2012-03-01 4:10 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 09/12] ARM: S3C2416: move mach-s3c2416/* into mach-s3c24xx/ Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-21 10:42 ` Heiko Stübner
2012-02-21 10:42 ` Heiko Stübner
2012-02-21 11:14 ` Kukjin Kim
2012-02-21 11:14 ` Kukjin Kim
2012-02-28 21:18 ` Heiko Stübner [this message]
2012-02-28 21:18 ` Heiko Stübner
2012-03-01 4:11 ` Kukjin Kim
2012-03-01 4:11 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 10/12] ARM: S3C2440: move mach-s3c2440/* " Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-15 22:55 ` [PATCH 11/12] ARM: S3C2443: move mach-s3c2443/* " Kukjin Kim
2012-02-15 22:55 ` Kukjin Kim
2012-02-28 21:39 ` [PATCH 00/12] ARM: S3C24XX: create mach-s3c24xx/ for S3C24XX SoCs - WIP Heiko Stübner
2012-02-28 21:39 ` Heiko Stübner
2012-03-01 3:51 ` Kukjin Kim
2012-03-01 3:51 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201202282218.09602.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.