[PATCH 0/8] ARM: mmp: support OF on pxa168

[PATCH 0/8] ARM: mmp: support OF on pxa168

[Haojian Zhuang]

Add OF support on gpio/serial/rtc/i2c components in pxa168 aspenite.

[PATCH 0/8] ARM: mmp: support OF on pxa168

[Haojian Zhuang]

Add OF support on gpio/serial/rtc/i2c components in pxa168 aspenite.

[PATCH 1/8] gpio: pxa: add OF support

[Haojian Zhuang]

gpio-pxa drivers needs to parse two properties: mrvl,gpio-irq0 and
mrvl,gpio-irq1.

There may be 3 irqs in gpio devices in arch-pxa. The first one may
be only for gpio0, the second on may be only for gpio1, and the last
one may be the irq mux for other gpios. In arch-mmp, there's only
one irq mux for all gpios.

Since irq mux is common, we only specify it in interrupts propery.
And we creates two properties mrvl,gpio-irq0 and mrvl,gpio-irq1 for
arch-pxa.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/gpio/gpio-pxa.c |   40 +++++++++++++++++++++++++++++++++++++---
 1 files changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index b2d3ee1..7d8e1d0 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
@@ -464,6 +465,39 @@ static int pxa_gpio_nums(void)
 	return count;
 }
 
+#ifdef CONFIG_OF
+static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
+				       int *irq0, int *irq1, int *irq_mux)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const __be32 *irq;
+
+	irq = of_get_property(np, "mrvl,gpio-irq0", NULL);
+	if (irq)
+		*irq0 = be32_to_cpup(irq);
+	irq = of_get_property(np, "mrvl,gpio-irq1", NULL);
+	if (irq)
+		*irq1 = be32_to_cpup(irq);
+	*irq_mux = platform_get_irq(pdev, 0);
+	return 0;
+}
+#else
+static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
+				       int *irq0, int *irq1, int *irq_mux)
+{
+	return 1;
+}
+#endif
+
+static int __devinit pxa_gpio_probe_irq(struct platform_device *pdev,
+					int *irq0, int *irq1, int *irq_mux)
+{
+	*irq0 = platform_get_irq_byname(pdev, "gpio0");
+	*irq1 = platform_get_irq_byname(pdev, "gpio1");
+	*irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+	return 0;
+}
+
 static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 {
 	struct pxa_gpio_chip *c;
@@ -476,9 +510,9 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 	if (!pxa_last_gpio)
 		return -EINVAL;
 
-	irq0 = platform_get_irq_byname(pdev, "gpio0");
-	irq1 = platform_get_irq_byname(pdev, "gpio1");
-	irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+	ret = pxa_gpio_probe_dt(pdev, &irq0, &irq1, &irq_mux);
+	if (ret > 0)
+		ret = pxa_gpio_probe_irq(pdev, &irq0, &irq1, &irq_mux);
 	if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
 		|| (irq_mux <= 0))
 		return -EINVAL;
-- 
1.7.0.4

[PATCH 1/8] gpio: pxa: add OF support

[Haojian Zhuang]

gpio-pxa drivers needs to parse two properties: mrvl,gpio-irq0 and
mrvl,gpio-irq1.

There may be 3 irqs in gpio devices in arch-pxa. The first one may
be only for gpio0, the second on may be only for gpio1, and the last
one may be the irq mux for other gpios. In arch-mmp, there's only
one irq mux for all gpios.

Since irq mux is common, we only specify it in interrupts propery.
And we creates two properties mrvl,gpio-irq0 and mrvl,gpio-irq1 for
arch-pxa.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/gpio/gpio-pxa.c |   40 +++++++++++++++++++++++++++++++++++++---
 1 files changed, 37 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index b2d3ee1..7d8e1d0 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
@@ -464,6 +465,39 @@ static int pxa_gpio_nums(void)
 	return count;
 }
 
+#ifdef CONFIG_OF
+static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
+				       int *irq0, int *irq1, int *irq_mux)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const __be32 *irq;
+
+	irq = of_get_property(np, "mrvl,gpio-irq0", NULL);
+	if (irq)
+		*irq0 = be32_to_cpup(irq);
+	irq = of_get_property(np, "mrvl,gpio-irq1", NULL);
+	if (irq)
+		*irq1 = be32_to_cpup(irq);
+	*irq_mux = platform_get_irq(pdev, 0);
+	return 0;
+}
+#else
+static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
+				       int *irq0, int *irq1, int *irq_mux)
+{
+	return 1;
+}
+#endif
+
+static int __devinit pxa_gpio_probe_irq(struct platform_device *pdev,
+					int *irq0, int *irq1, int *irq_mux)
+{
+	*irq0 = platform_get_irq_byname(pdev, "gpio0");
+	*irq1 = platform_get_irq_byname(pdev, "gpio1");
+	*irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+	return 0;
+}
+
 static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 {
 	struct pxa_gpio_chip *c;
@@ -476,9 +510,9 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 	if (!pxa_last_gpio)
 		return -EINVAL;
 
-	irq0 = platform_get_irq_byname(pdev, "gpio0");
-	irq1 = platform_get_irq_byname(pdev, "gpio1");
-	irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+	ret = pxa_gpio_probe_dt(pdev, &irq0, &irq1, &irq_mux);
+	if (ret > 0)
+		ret = pxa_gpio_probe_irq(pdev, &irq0, &irq1, &irq_mux);
 	if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
 		|| (irq_mux <= 0))
 		return -EINVAL;
-- 
1.7.0.4

[PATCH 1/8] gpio: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> +#ifdef CONFIG_OF
> +static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
> +                                      int *irq0, int *irq1, int *irq_mux)
> +{
> +       struct device_node *np = pdev->dev.of_node;
> +       const __be32 *irq;
> +
> +       irq = of_get_property(np, "mrvl,gpio-irq0", NULL);
> +       if (irq)
> +               *irq0 = be32_to_cpup(irq);
> +       irq = of_get_property(np, "mrvl,gpio-irq1", NULL);
> +       if (irq)
> +               *irq1 = be32_to_cpup(irq);
> +       *irq_mux = platform_get_irq(pdev, 0);
> +       return 0;
> +}
> +#else
> +static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
> +                                      int *irq0, int *irq1, int *irq_mux)
> +{
> +       return 1;
> +}
> +#endif
> +

It seems that you are not following the regular IRQ binding. This should
probably use irq_of_parse_and_map().

For other code like the one above, I suggest you use
of_property_read_u32_array(), which will already compile to nothing
if CONFIG_OF is not set, so you don't have to provide two versions of
the fucntion.

	Arnd

Re: [PATCH 1/8] gpio: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> +#ifdef CONFIG_OF
> +static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
> +                                      int *irq0, int *irq1, int *irq_mux)
> +{
> +       struct device_node *np = pdev->dev.of_node;
> +       const __be32 *irq;
> +
> +       irq = of_get_property(np, "mrvl,gpio-irq0", NULL);
> +       if (irq)
> +               *irq0 = be32_to_cpup(irq);
> +       irq = of_get_property(np, "mrvl,gpio-irq1", NULL);
> +       if (irq)
> +               *irq1 = be32_to_cpup(irq);
> +       *irq_mux = platform_get_irq(pdev, 0);
> +       return 0;
> +}
> +#else
> +static int __devinit pxa_gpio_probe_dt(struct platform_device *pdev,
> +                                      int *irq0, int *irq1, int *irq_mux)
> +{
> +       return 1;
> +}
> +#endif
> +

It seems that you are not following the regular IRQ binding. This should
probably use irq_of_parse_and_map().

For other code like the one above, I suggest you use
of_property_read_u32_array(), which will already compile to nothing
if CONFIG_OF is not set, so you don't have to provide two versions of
the fucntion.

	Arnd

[PATCH 1/8] gpio: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Arnd Bergmann wrote:
> It seems that you are not following the regular IRQ binding. This should
> probably use irq_of_parse_and_map().

Or better platform_get_irq, see comment on rtc driver.

	Arnd

Re: [PATCH 1/8] gpio: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Arnd Bergmann wrote:
> It seems that you are not following the regular IRQ binding. This should
> probably use irq_of_parse_and_map().

Or better platform_get_irq, see comment on rtc driver.

	Arnd

[PATCH 2/8] serial: pxa: add OF support

[Haojian Zhuang]

Parse uart device id from alias in DTS file.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/tty/serial/pxa.c |   57 ++++++++++++++++++++++++++++++++++++---------
 1 files changed, 45 insertions(+), 12 deletions(-)

diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5c8e3bb..380f15f 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -36,6 +36,7 @@
 #include <linux/circ_buf.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -781,6 +782,39 @@ static const struct dev_pm_ops serial_pxa_pm_ops = {
 };
 #endif
 
+static struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+#ifdef CONFIG_OF
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		return 1;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	sport->port.line = ret;
+	return 0;
+}
+#else
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	return 1;
+}
+#endif
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
@@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 	if (!mmres || !irqres)
 		return -ENODEV;
 
-	sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+	sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
 	if (!sport)
 		return -ENOMEM;
 
@@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.irq = irqres->start;
 	sport->port.fifosize = 64;
 	sport->port.ops = &serial_pxa_pops;
-	sport->port.line = dev->id;
 	sport->port.dev = &dev->dev;
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	switch (dev->id) {
-	case 0: sport->name = "FFUART"; break;
-	case 1: sport->name = "BTUART"; break;
-	case 2: sport->name = "STUART"; break;
-	case 3: sport->name = "HWUART"; break;
-	default:
-		sport->name = "???";
-		break;
-	}
+	ret = serial_pxa_probe_dt(dev, sport);
+	if (ret > 0)
+		sport->port.line = dev->id;
+	else if (ret < 0)
+		goto err_clk;
+	sport->name = (char *)((unsigned int)sport + 8);
+	/* name can't exceed 8 bytes */
+	sprintf(sport->name, "UART%d", sport->port.line + 1);
 
 	sport->port.membase = ioremap(mmres->start, resource_size(mmres));
 	if (!sport->port.membase) {
@@ -829,7 +861,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_clk;
 	}
 
-	serial_pxa_ports[dev->id] = sport;
+	serial_pxa_ports[sport->port.line] = sport;
 
 	uart_add_one_port(&serial_pxa_reg, &sport->port);
 	platform_set_drvdata(dev, sport);
@@ -866,6 +898,7 @@ static struct platform_driver serial_pxa_driver = {
 #ifdef CONFIG_PM
 		.pm	= &serial_pxa_pm_ops,
 #endif
+		.of_match_table = serial_pxa_dt_ids,
 	},
 };
 
-- 
1.7.0.4

[PATCH 2/8] serial: pxa: add OF support

[Haojian Zhuang]

Parse uart device id from alias in DTS file.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/tty/serial/pxa.c |   57 ++++++++++++++++++++++++++++++++++++---------
 1 files changed, 45 insertions(+), 12 deletions(-)

diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 5c8e3bb..380f15f 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -36,6 +36,7 @@
 #include <linux/circ_buf.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -781,6 +782,39 @@ static const struct dev_pm_ops serial_pxa_pm_ops = {
 };
 #endif
 
+static struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-uart", },
+	{ .compatible = "mrvl,mmp-uart", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+#ifdef CONFIG_OF
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		return 1;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+		return ret;
+	}
+	sport->port.line = ret;
+	return 0;
+}
+#else
+static int serial_pxa_probe_dt(struct platform_device *pdev,
+			       struct uart_pxa_port *sport)
+{
+	return 1;
+}
+#endif
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
@@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 	if (!mmres || !irqres)
 		return -ENODEV;
 
-	sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
+	sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
 	if (!sport)
 		return -ENOMEM;
 
@@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.irq = irqres->start;
 	sport->port.fifosize = 64;
 	sport->port.ops = &serial_pxa_pops;
-	sport->port.line = dev->id;
 	sport->port.dev = &dev->dev;
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	switch (dev->id) {
-	case 0: sport->name = "FFUART"; break;
-	case 1: sport->name = "BTUART"; break;
-	case 2: sport->name = "STUART"; break;
-	case 3: sport->name = "HWUART"; break;
-	default:
-		sport->name = "???";
-		break;
-	}
+	ret = serial_pxa_probe_dt(dev, sport);
+	if (ret > 0)
+		sport->port.line = dev->id;
+	else if (ret < 0)
+		goto err_clk;
+	sport->name = (char *)((unsigned int)sport + 8);
+	/* name can't exceed 8 bytes */
+	sprintf(sport->name, "UART%d", sport->port.line + 1);
 
 	sport->port.membase = ioremap(mmres->start, resource_size(mmres));
 	if (!sport->port.membase) {
@@ -829,7 +861,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_clk;
 	}
 
-	serial_pxa_ports[dev->id] = sport;
+	serial_pxa_ports[sport->port.line] = sport;
 
 	uart_add_one_port(&serial_pxa_reg, &sport->port);
 	platform_set_drvdata(dev, sport);
@@ -866,6 +898,7 @@ static struct platform_driver serial_pxa_driver = {
 #ifdef CONFIG_PM
 		.pm	= &serial_pxa_pm_ops,
 #endif
+		.of_match_table = serial_pxa_dt_ids,
 	},
 };
 
-- 
1.7.0.4

[PATCH 2/8] serial: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> @@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
>         if (!mmres || !irqres)
>                 return -ENODEV;
>  
> -       sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
> +       sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
>         if (!sport)
>                 return -ENOMEM;
>  
> @@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
> +       ret = serial_pxa_probe_dt(dev, sport);
> +       if (ret > 0)
> +               sport->port.line = dev->id;
> +       else if (ret < 0)
> +               goto err_clk;
> +       sport->name = (char *)((unsigned int)sport + 8);
> +       /* name can't exceed 8 bytes */
> +       sprintf(sport->name, "UART%d", sport->port.line + 1);

The pointer arithmetic looks wrong to me, both technically and morally ;-)

Since struct uart_pxa_port is a local data structure, why don't you just
turn the name field into a fixed-length array?

	Arnd

Re: [PATCH 2/8] serial: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> @@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
>         if (!mmres || !irqres)
>                 return -ENODEV;
>  
> -       sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
> +       sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
>         if (!sport)
>                 return -ENOMEM;
>  
> @@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
> +       ret = serial_pxa_probe_dt(dev, sport);
> +       if (ret > 0)
> +               sport->port.line = dev->id;
> +       else if (ret < 0)
> +               goto err_clk;
> +       sport->name = (char *)((unsigned int)sport + 8);
> +       /* name can't exceed 8 bytes */
> +       sprintf(sport->name, "UART%d", sport->port.line + 1);

The pointer arithmetic looks wrong to me, both technically and morally ;-)

Since struct uart_pxa_port is a local data structure, why don't you just
turn the name field into a fixed-length array?

	Arnd

[PATCH 2/8] serial: pxa: add OF support

[Russell King - ARM Linux]

On Thu, Mar 01, 2012 at 09:47:39AM +0000, Arnd Bergmann wrote:
> On Thursday 01 March 2012, Haojian Zhuang wrote:
> > @@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
> >         if (!mmres || !irqres)
> >                 return -ENODEV;
> >  
> > -       sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
> > +       sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
> >         if (!sport)
> >                 return -ENOMEM;
> >  
> > @@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
> > +       ret = serial_pxa_probe_dt(dev, sport);
> > +       if (ret > 0)
> > +               sport->port.line = dev->id;
> > +       else if (ret < 0)
> > +               goto err_clk;
> > +       sport->name = (char *)((unsigned int)sport + 8);
> > +       /* name can't exceed 8 bytes */
> > +       sprintf(sport->name, "UART%d", sport->port.line + 1);
> 
> The pointer arithmetic looks wrong to me, both technically and morally ;-)
> 
> Since struct uart_pxa_port is a local data structure, why don't you just
> turn the name field into a fixed-length array?

and then use snprintf() to ensure that it doesn't overflow.

Re: [PATCH 2/8] serial: pxa: add OF support

[Russell King - ARM Linux]

On Thu, Mar 01, 2012 at 09:47:39AM +0000, Arnd Bergmann wrote:
> On Thursday 01 March 2012, Haojian Zhuang wrote:
> > @@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
> >         if (!mmres || !irqres)
> >                 return -ENODEV;
> >  
> > -       sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
> > +       sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
> >         if (!sport)
> >                 return -ENOMEM;
> >  
> > @@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
> > +       ret = serial_pxa_probe_dt(dev, sport);
> > +       if (ret > 0)
> > +               sport->port.line = dev->id;
> > +       else if (ret < 0)
> > +               goto err_clk;
> > +       sport->name = (char *)((unsigned int)sport + 8);
> > +       /* name can't exceed 8 bytes */
> > +       sprintf(sport->name, "UART%d", sport->port.line + 1);
> 
> The pointer arithmetic looks wrong to me, both technically and morally ;-)
> 
> Since struct uart_pxa_port is a local data structure, why don't you just
> turn the name field into a fixed-length array?

and then use snprintf() to ensure that it doesn't overflow.

[PATCH 2/8] serial: pxa: add OF support

[Haojian Zhuang]

On Thu, Mar 1, 2012 at 5:48 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Thu, Mar 01, 2012 at 09:47:39AM +0000, Arnd Bergmann wrote:
>> On Thursday 01 March 2012, Haojian Zhuang wrote:
>> > @@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
>> > ? ? ? ? if (!mmres || !irqres)
>> > ? ? ? ? ? ? ? ? return -ENODEV;
>> >
>> > - ? ? ? sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
>> > + ? ? ? sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
>> > ? ? ? ? if (!sport)
>> > ? ? ? ? ? ? ? ? return -ENOMEM;
>> >
>> > @@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
>> > + ? ? ? ret = serial_pxa_probe_dt(dev, sport);
>> > + ? ? ? if (ret > 0)
>> > + ? ? ? ? ? ? ? sport->port.line = dev->id;
>> > + ? ? ? else if (ret < 0)
>> > + ? ? ? ? ? ? ? goto err_clk;
>> > + ? ? ? sport->name = (char *)((unsigned int)sport + 8);
>> > + ? ? ? /* name can't exceed 8 bytes */
>> > + ? ? ? sprintf(sport->name, "UART%d", sport->port.line + 1);
>>
>> The pointer arithmetic looks wrong to me, both technically and morally ;-)
>>
>> Since struct uart_pxa_port is a local data structure, why don't you just
>> turn the name field into a fixed-length array?
>
> and then use snprintf() to ensure that it doesn't overflow.

OK. I'll use local data structure and snprintf() instead.

Re: [PATCH 2/8] serial: pxa: add OF support

[Haojian Zhuang]

On Thu, Mar 1, 2012 at 5:48 PM, Russell King - ARM Linux
<linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> wrote:
> On Thu, Mar 01, 2012 at 09:47:39AM +0000, Arnd Bergmann wrote:
>> On Thursday 01 March 2012, Haojian Zhuang wrote:
>> > @@ -792,7 +826,7 @@ static int serial_pxa_probe(struct platform_device *dev)
>> >         if (!mmres || !irqres)
>> >                 return -ENODEV;
>> >
>> > -       sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
>> > +       sport = kzalloc(sizeof(struct uart_pxa_port) + 8, GFP_KERNEL);
>> >         if (!sport)
>> >                 return -ENOMEM;
>> >
>> > @@ -808,20 +842,18 @@ static int serial_pxa_probe(struct platform_device *dev)
>> > +       ret = serial_pxa_probe_dt(dev, sport);
>> > +       if (ret > 0)
>> > +               sport->port.line = dev->id;
>> > +       else if (ret < 0)
>> > +               goto err_clk;
>> > +       sport->name = (char *)((unsigned int)sport + 8);
>> > +       /* name can't exceed 8 bytes */
>> > +       sprintf(sport->name, "UART%d", sport->port.line + 1);
>>
>> The pointer arithmetic looks wrong to me, both technically and morally ;-)
>>
>> Since struct uart_pxa_port is a local data structure, why don't you just
>> turn the name field into a fixed-length array?
>
> and then use snprintf() to ensure that it doesn't overflow.

OK. I'll use local data structure and snprintf() instead.

[PATCH 3/8] rtc: sa1100: add OF support

[Haojian Zhuang]

There're two interrupts are used in rtc-sa1100 devices. The RTC-alarm
interrupt is specified as default interrupt. The RTC-1Hz interrupt is
specified as "mrvl,rtc-irqhz" property in DTS file.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/rtc/rtc-sa1100.c |   54 +++++++++++++++++++++++++++++++++++++++------
 1 files changed, 46 insertions(+), 8 deletions(-)

diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 962510c..09f05d5 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
@@ -228,28 +229,64 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 	.alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
 };
 
+static struct of_device_id sa1100_rtc_dt_ids[] = {
+	{ .compatible = "mrvl,sa1100-rtc", },
+	{ .compatible = "mrvl,mmp-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
+
+#ifdef CONFIG_OF
+static int sa1100_rtc_probe_dt(struct platform_device *pdev,
+			       struct sa1100_rtc *info)
+{
+	info->irq_alarm = platform_get_irq(pdev, 0);
+	info->irq_1hz = platform_get_irq(pdev, 1);
+	if (info->irq_1hz < 0 || info->irq_alarm < 0)
+		return -ENODEV;
+	return 0;
+}
+#else
+static int sa1100_rtc_probe_dt(struct platform_device *pdev,
+			       struct sa1100_rtc *info)
+{
+	return 1;
+}
+#endif
+
+static int sa1100_rtc_probe_irq(struct platform_device *pdev,
+				struct sa1100_rtc *info)
+{
+	info->irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+	info->irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+	if (info->irq_1hz < 0 || info->irq_alarm < 0)
+		return -ENODEV;
+	return 0;
+}
+
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct sa1100_rtc *info;
-	int irq_1hz, irq_alarm, ret = 0;
-
-	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
-	irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
-	if (irq_1hz < 0 || irq_alarm < 0)
-		return -ENODEV;
+	int ret = 0;
 
 	info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
+	ret = sa1100_rtc_probe_dt(pdev, info);
+	if (ret > 0)
+		ret = sa1100_rtc_probe_irq(pdev, info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get rtc irq\n");
+		goto err_clk;
+	}
+
 	info->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(info->clk)) {
 		dev_err(&pdev->dev, "failed to find rtc clock source\n");
 		ret = PTR_ERR(info->clk);
 		goto err_clk;
 	}
-	info->irq_1hz = irq_1hz;
-	info->irq_alarm = irq_alarm;
 	spin_lock_init(&info->lock);
 	platform_set_drvdata(pdev, info);
 
@@ -357,6 +394,7 @@ static struct platform_driver sa1100_rtc_driver = {
 #ifdef CONFIG_PM
 		.pm	= &sa1100_rtc_pm_ops,
 #endif
+		.of_match_table = sa1100_rtc_dt_ids,
 	},
 };
 
-- 
1.7.0.4

[PATCH 3/8] rtc: sa1100: add OF support

[Haojian Zhuang]

There're two interrupts are used in rtc-sa1100 devices. The RTC-alarm
interrupt is specified as default interrupt. The RTC-1Hz interrupt is
specified as "mrvl,rtc-irqhz" property in DTS file.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/rtc/rtc-sa1100.c |   54 +++++++++++++++++++++++++++++++++++++++------
 1 files changed, 46 insertions(+), 8 deletions(-)

diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 962510c..09f05d5 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/of.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
@@ -228,28 +229,64 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 	.alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
 };
 
+static struct of_device_id sa1100_rtc_dt_ids[] = {
+	{ .compatible = "mrvl,sa1100-rtc", },
+	{ .compatible = "mrvl,mmp-rtc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sa1100_rtc_dt_ids);
+
+#ifdef CONFIG_OF
+static int sa1100_rtc_probe_dt(struct platform_device *pdev,
+			       struct sa1100_rtc *info)
+{
+	info->irq_alarm = platform_get_irq(pdev, 0);
+	info->irq_1hz = platform_get_irq(pdev, 1);
+	if (info->irq_1hz < 0 || info->irq_alarm < 0)
+		return -ENODEV;
+	return 0;
+}
+#else
+static int sa1100_rtc_probe_dt(struct platform_device *pdev,
+			       struct sa1100_rtc *info)
+{
+	return 1;
+}
+#endif
+
+static int sa1100_rtc_probe_irq(struct platform_device *pdev,
+				struct sa1100_rtc *info)
+{
+	info->irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
+	info->irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
+	if (info->irq_1hz < 0 || info->irq_alarm < 0)
+		return -ENODEV;
+	return 0;
+}
+
 static int sa1100_rtc_probe(struct platform_device *pdev)
 {
 	struct rtc_device *rtc;
 	struct sa1100_rtc *info;
-	int irq_1hz, irq_alarm, ret = 0;
-
-	irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
-	irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
-	if (irq_1hz < 0 || irq_alarm < 0)
-		return -ENODEV;
+	int ret = 0;
 
 	info = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
+	ret = sa1100_rtc_probe_dt(pdev, info);
+	if (ret > 0)
+		ret = sa1100_rtc_probe_irq(pdev, info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get rtc irq\n");
+		goto err_clk;
+	}
+
 	info->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(info->clk)) {
 		dev_err(&pdev->dev, "failed to find rtc clock source\n");
 		ret = PTR_ERR(info->clk);
 		goto err_clk;
 	}
-	info->irq_1hz = irq_1hz;
-	info->irq_alarm = irq_alarm;
 	spin_lock_init(&info->lock);
 	platform_set_drvdata(pdev, info);
 
@@ -357,6 +394,7 @@ static struct platform_driver sa1100_rtc_driver = {
 #ifdef CONFIG_PM
 		.pm	= &sa1100_rtc_pm_ops,
 #endif
+		.of_match_table = sa1100_rtc_dt_ids,
 	},
 };
 
-- 
1.7.0.4

[PATCH 3/8] rtc: sa1100: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> +#ifdef CONFIG_OF
> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
> +                              struct sa1100_rtc *info)
> +{
> +       info->irq_alarm = platform_get_irq(pdev, 0);
> +       info->irq_1hz = platform_get_irq(pdev, 1);
> +       if (info->irq_1hz < 0 || info->irq_alarm < 0)
> +               return -ENODEV;
> +       return 0;
> +}
> +#else
> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
> +                              struct sa1100_rtc *info)
> +{
> +       return 1;
> +}
> +#endif
> +
> +static int sa1100_rtc_probe_irq(struct platform_device *pdev,
> +                               struct sa1100_rtc *info)
> +{
> +       info->irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
> +       info->irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
> +       if (info->irq_1hz < 0 || info->irq_alarm < 0)
> +               return -ENODEV;
> +       return 0;
> +}

This should not be necessary. I thought we had already added support
for named irq resources coming from the device tree. If not, why not
just make the other ones anonymous as well and just use platform_get_irq()?

	Arnd

Re: [PATCH 3/8] rtc: sa1100: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> +#ifdef CONFIG_OF
> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
> +                              struct sa1100_rtc *info)
> +{
> +       info->irq_alarm = platform_get_irq(pdev, 0);
> +       info->irq_1hz = platform_get_irq(pdev, 1);
> +       if (info->irq_1hz < 0 || info->irq_alarm < 0)
> +               return -ENODEV;
> +       return 0;
> +}
> +#else
> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
> +                              struct sa1100_rtc *info)
> +{
> +       return 1;
> +}
> +#endif
> +
> +static int sa1100_rtc_probe_irq(struct platform_device *pdev,
> +                               struct sa1100_rtc *info)
> +{
> +       info->irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
> +       info->irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
> +       if (info->irq_1hz < 0 || info->irq_alarm < 0)
> +               return -ENODEV;
> +       return 0;
> +}

This should not be necessary. I thought we had already added support
for named irq resources coming from the device tree. If not, why not
just make the other ones anonymous as well and just use platform_get_irq()?

	Arnd

[PATCH 3/8] rtc: sa1100: add OF support

[Haojian Zhuang]

On Thu, Mar 1, 2012 at 5:51 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 01 March 2012, Haojian Zhuang wrote:
>> +#ifdef CONFIG_OF
>> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
>> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?struct sa1100_rtc *info)
>> +{
>> + ? ? ? info->irq_alarm = platform_get_irq(pdev, 0);
>> + ? ? ? info->irq_1hz = platform_get_irq(pdev, 1);
>> + ? ? ? if (info->irq_1hz < 0 || info->irq_alarm < 0)
>> + ? ? ? ? ? ? ? return -ENODEV;
>> + ? ? ? return 0;
>> +}
>> +#else
>> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
>> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?struct sa1100_rtc *info)
>> +{
>> + ? ? ? return 1;
>> +}
>> +#endif
>> +
>> +static int sa1100_rtc_probe_irq(struct platform_device *pdev,
>> + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct sa1100_rtc *info)
>> +{
>> + ? ? ? info->irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
>> + ? ? ? info->irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
>> + ? ? ? if (info->irq_1hz < 0 || info->irq_alarm < 0)
>> + ? ? ? ? ? ? ? return -ENODEV;
>> + ? ? ? return 0;
>> +}
>
> This should not be necessary. I thought we had already added support
> for named irq resources coming from the device tree. If not, why not
> just make the other ones anonymous as well and just use platform_get_irq()?
>

Yes, platform_get_irq() is better. I'll append the two irqs into
interrupts property.

Re: [PATCH 3/8] rtc: sa1100: add OF support

[Haojian Zhuang]

On Thu, Mar 1, 2012 at 5:51 PM, Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> wrote:
> On Thursday 01 March 2012, Haojian Zhuang wrote:
>> +#ifdef CONFIG_OF
>> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
>> +                              struct sa1100_rtc *info)
>> +{
>> +       info->irq_alarm = platform_get_irq(pdev, 0);
>> +       info->irq_1hz = platform_get_irq(pdev, 1);
>> +       if (info->irq_1hz < 0 || info->irq_alarm < 0)
>> +               return -ENODEV;
>> +       return 0;
>> +}
>> +#else
>> +static int sa1100_rtc_probe_dt(struct platform_device *pdev,
>> +                              struct sa1100_rtc *info)
>> +{
>> +       return 1;
>> +}
>> +#endif
>> +
>> +static int sa1100_rtc_probe_irq(struct platform_device *pdev,
>> +                               struct sa1100_rtc *info)
>> +{
>> +       info->irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
>> +       info->irq_alarm = platform_get_irq_byname(pdev, "rtc alarm");
>> +       if (info->irq_1hz < 0 || info->irq_alarm < 0)
>> +               return -ENODEV;
>> +       return 0;
>> +}
>
> This should not be necessary. I thought we had already added support
> for named irq resources coming from the device tree. If not, why not
> just make the other ones anonymous as well and just use platform_get_irq()?
>

Yes, platform_get_irq() is better. I'll append the two irqs into
interrupts property.

[PATCH 4/8] i2c: pxa: add OF support

[Haojian Zhuang]

Append these properties in below.
mrvl,i2c-polling
mrvl,i2c-mode

Still keep slave, slave_addr and class in platform data.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/i2c/busses/i2c-pxa.c |  101 ++++++++++++++++++++++++++++++++---------
 1 files changed, 79 insertions(+), 22 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index d603646..883d14f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -29,6 +29,8 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/i2c-pxa.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
@@ -1044,23 +1046,64 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
 	.functionality	= i2c_pxa_functionality,
 };
 
-static int i2c_pxa_probe(struct platform_device *dev)
+static struct of_device_id i2c_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-i2c", .data = &pxa_reg_layout[REGS_PXA2XX] },
+	{ .compatible = "mrvl,pwri2c", .data = &pxa_reg_layout[REGS_PXA3XX] },
+	{ .compatible = "mrvl,mmp-twsi", .data = &pxa_reg_layout[REGS_PXA2XX] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
+#ifdef CONFIG_OF
+static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
+			    enum pxa_i2c_types *i2c_types)
 {
-	struct pxa_i2c *i2c;
-	struct resource *res;
-	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
-	const struct platform_device_id *id = platform_get_device_id(dev);
-	enum pxa_i2c_types i2c_type = id->driver_data;
-	int ret;
-	int irq;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(i2c_pxa_dt_ids, &pdev->dev);
+	const char *status;
+	int len;
+
+	if (of_get_property(np, "mrvl,i2c-polling", NULL))
+		i2c->use_pio = 1;
+	status = of_get_property(np, "mrvl,i2c-mode", &len);
+	if (status && len > 0)
+		if (!strcmp(status, "fast"))
+			i2c->fast_mode = 1;
+	*i2c_types = ((u32)(of_id->data) - (u32)&pxa_reg_layout[0])
+			/ sizeof(struct pxa_reg_layout);
+	return 0;
+}
+#else
+static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
+			    enum pxa_i2c_types *i2c_types)
+{
+	return 1;
+}
+#endif
 
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(dev, 0);
-	if (res == NULL || irq < 0)
-		return -ENODEV;
+static int i2c_pxa_probe_pdata(struct platform_device *pdev,
+			       struct pxa_i2c *i2c,
+			       enum pxa_i2c_types *i2c_types)
+{
+	struct i2c_pxa_platform_data *plat = pdev->dev.platform_data;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 
-	if (!request_mem_region(res->start, resource_size(res), res->name))
-		return -ENOMEM;
+	*i2c_types = id->driver_data;
+	if (plat) {
+		i2c->use_pio = plat->use_pio;
+		i2c->fast_mode = plat->fast_mode;
+	}
+	return 0;
+}
+
+static int i2c_pxa_probe(struct platform_device *dev)
+{
+	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	enum pxa_i2c_types i2c_type;
+	struct pxa_i2c *i2c;
+	struct resource *res = NULL;
+	int ret, irq;
 
 	i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
 	if (!i2c) {
@@ -1068,6 +1111,24 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		goto emalloc;
 	}
 
+	ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
+	if (ret > 0)
+		ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
+	if (ret < 0)
+		goto eclk;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(dev, 0);
+	if (res == NULL || irq < 0) {
+		ret = -ENODEV;
+		goto eclk;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), res->name)) {
+		ret = -ENOMEM;
+		goto eclk;
+	}
+
 	i2c->adap.owner   = THIS_MODULE;
 	i2c->adap.retries = 5;
 
@@ -1109,21 +1170,16 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
 
-#ifdef CONFIG_I2C_PXA_SLAVE
 	if (plat) {
+#ifdef CONFIG_I2C_PXA_SLAVE
 		i2c->slave_addr = plat->slave_addr;
 		i2c->slave = plat->slave;
-	}
 #endif
-
-	clk_enable(i2c->clk);
-
-	if (plat) {
 		i2c->adap.class = plat->class;
-		i2c->use_pio = plat->use_pio;
-		i2c->fast_mode = plat->fast_mode;
 	}
 
+	clk_enable(i2c->clk);
+
 	if (i2c->use_pio) {
 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
 	} else {
@@ -1234,6 +1290,7 @@ static struct platform_driver i2c_pxa_driver = {
 		.name	= "pxa2xx-i2c",
 		.owner	= THIS_MODULE,
 		.pm	= I2C_PXA_DEV_PM_OPS,
+		.of_match_table = i2c_pxa_dt_ids,
 	},
 	.id_table	= i2c_pxa_id_table,
 };
-- 
1.7.0.4

[PATCH 4/8] i2c: pxa: add OF support

[Haojian Zhuang]

Append these properties in below.
mrvl,i2c-polling
mrvl,i2c-mode

Still keep slave, slave_addr and class in platform data.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 drivers/i2c/busses/i2c-pxa.c |  101 ++++++++++++++++++++++++++++++++---------
 1 files changed, 79 insertions(+), 22 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index d603646..883d14f 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -29,6 +29,8 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/i2c-pxa.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
@@ -1044,23 +1046,64 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
 	.functionality	= i2c_pxa_functionality,
 };
 
-static int i2c_pxa_probe(struct platform_device *dev)
+static struct of_device_id i2c_pxa_dt_ids[] = {
+	{ .compatible = "mrvl,pxa-i2c", .data = &pxa_reg_layout[REGS_PXA2XX] },
+	{ .compatible = "mrvl,pwri2c", .data = &pxa_reg_layout[REGS_PXA3XX] },
+	{ .compatible = "mrvl,mmp-twsi", .data = &pxa_reg_layout[REGS_PXA2XX] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
+
+#ifdef CONFIG_OF
+static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
+			    enum pxa_i2c_types *i2c_types)
 {
-	struct pxa_i2c *i2c;
-	struct resource *res;
-	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
-	const struct platform_device_id *id = platform_get_device_id(dev);
-	enum pxa_i2c_types i2c_type = id->driver_data;
-	int ret;
-	int irq;
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *of_id =
+			of_match_device(i2c_pxa_dt_ids, &pdev->dev);
+	const char *status;
+	int len;
+
+	if (of_get_property(np, "mrvl,i2c-polling", NULL))
+		i2c->use_pio = 1;
+	status = of_get_property(np, "mrvl,i2c-mode", &len);
+	if (status && len > 0)
+		if (!strcmp(status, "fast"))
+			i2c->fast_mode = 1;
+	*i2c_types = ((u32)(of_id->data) - (u32)&pxa_reg_layout[0])
+			/ sizeof(struct pxa_reg_layout);
+	return 0;
+}
+#else
+static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
+			    enum pxa_i2c_types *i2c_types)
+{
+	return 1;
+}
+#endif
 
-	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(dev, 0);
-	if (res == NULL || irq < 0)
-		return -ENODEV;
+static int i2c_pxa_probe_pdata(struct platform_device *pdev,
+			       struct pxa_i2c *i2c,
+			       enum pxa_i2c_types *i2c_types)
+{
+	struct i2c_pxa_platform_data *plat = pdev->dev.platform_data;
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 
-	if (!request_mem_region(res->start, resource_size(res), res->name))
-		return -ENOMEM;
+	*i2c_types = id->driver_data;
+	if (plat) {
+		i2c->use_pio = plat->use_pio;
+		i2c->fast_mode = plat->fast_mode;
+	}
+	return 0;
+}
+
+static int i2c_pxa_probe(struct platform_device *dev)
+{
+	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	enum pxa_i2c_types i2c_type;
+	struct pxa_i2c *i2c;
+	struct resource *res = NULL;
+	int ret, irq;
 
 	i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
 	if (!i2c) {
@@ -1068,6 +1111,24 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		goto emalloc;
 	}
 
+	ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
+	if (ret > 0)
+		ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
+	if (ret < 0)
+		goto eclk;
+
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(dev, 0);
+	if (res == NULL || irq < 0) {
+		ret = -ENODEV;
+		goto eclk;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), res->name)) {
+		ret = -ENOMEM;
+		goto eclk;
+	}
+
 	i2c->adap.owner   = THIS_MODULE;
 	i2c->adap.retries = 5;
 
@@ -1109,21 +1170,16 @@ static int i2c_pxa_probe(struct platform_device *dev)
 
 	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
 
-#ifdef CONFIG_I2C_PXA_SLAVE
 	if (plat) {
+#ifdef CONFIG_I2C_PXA_SLAVE
 		i2c->slave_addr = plat->slave_addr;
 		i2c->slave = plat->slave;
-	}
 #endif
-
-	clk_enable(i2c->clk);
-
-	if (plat) {
 		i2c->adap.class = plat->class;
-		i2c->use_pio = plat->use_pio;
-		i2c->fast_mode = plat->fast_mode;
 	}
 
+	clk_enable(i2c->clk);
+
 	if (i2c->use_pio) {
 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
 	} else {
@@ -1234,6 +1290,7 @@ static struct platform_driver i2c_pxa_driver = {
 		.name	= "pxa2xx-i2c",
 		.owner	= THIS_MODULE,
 		.pm	= I2C_PXA_DEV_PM_OPS,
+		.of_match_table = i2c_pxa_dt_ids,
 	},
 	.id_table	= i2c_pxa_id_table,
 };
-- 
1.7.0.4

[PATCH 4/8] i2c: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> +#ifdef CONFIG_OF
> +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
> +                           enum pxa_i2c_types *i2c_types)
>  {
> +       struct device_node *np = pdev->dev.of_node;
> +       const struct of_device_id *of_id =
> +                       of_match_device(i2c_pxa_dt_ids, &pdev->dev);
> +       const char *status;
> +       int len;
> +
> +       if (of_get_property(np, "mrvl,i2c-polling", NULL))
> +               i2c->use_pio = 1;
> +       status = of_get_property(np, "mrvl,i2c-mode", &len);
> +       if (status && len > 0)
> +               if (!strcmp(status, "fast"))
> +                       i2c->fast_mode = 1;

This would be easier if you made it an empty "mrvl,i2c-fast-mode"
property to get rid of the strcmp.

> +       *i2c_types = ((u32)(of_id->data) - (u32)&pxa_reg_layout[0])
> +                       / sizeof(struct pxa_reg_layout);

This looks unnecessarily complicated. Just put the enum into of_id->data
instead of the pointer, with a cast to unsigned long.

> +       return 0;
> +}
> +#else
> +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
> +                           enum pxa_i2c_types *i2c_types)
> +{
> +       return 1;
> +}
> +#endif

Again, no need for the #ifdef. Just add in the beginning

	if (!of_id)
		return 1;

And the rest will be optimized out without CONFIG_OF.

	Arnd

Re: [PATCH 4/8] i2c: pxa: add OF support

[Arnd Bergmann]

On Thursday 01 March 2012, Haojian Zhuang wrote:
> +#ifdef CONFIG_OF
> +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
> +                           enum pxa_i2c_types *i2c_types)
>  {
> +       struct device_node *np = pdev->dev.of_node;
> +       const struct of_device_id *of_id =
> +                       of_match_device(i2c_pxa_dt_ids, &pdev->dev);
> +       const char *status;
> +       int len;
> +
> +       if (of_get_property(np, "mrvl,i2c-polling", NULL))
> +               i2c->use_pio = 1;
> +       status = of_get_property(np, "mrvl,i2c-mode", &len);
> +       if (status && len > 0)
> +               if (!strcmp(status, "fast"))
> +                       i2c->fast_mode = 1;

This would be easier if you made it an empty "mrvl,i2c-fast-mode"
property to get rid of the strcmp.

> +       *i2c_types = ((u32)(of_id->data) - (u32)&pxa_reg_layout[0])
> +                       / sizeof(struct pxa_reg_layout);

This looks unnecessarily complicated. Just put the enum into of_id->data
instead of the pointer, with a cast to unsigned long.

> +       return 0;
> +}
> +#else
> +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
> +                           enum pxa_i2c_types *i2c_types)
> +{
> +       return 1;
> +}
> +#endif

Again, no need for the #ifdef. Just add in the beginning

	if (!of_id)
		return 1;

And the rest will be optimized out without CONFIG_OF.

	Arnd

[PATCH 5/8] ARM: mmp: enable rtc clk in pxa168

[Haojian Zhuang]

Enable clk of rtc-sa1100 device in pxa168.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-mmp/pxa168.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 9f61256..aa62d0c 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,6 +65,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
+static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
@@ -93,6 +94,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
 static int __init pxa168_init(void)
-- 
1.7.0.4

[PATCH 5/8] ARM: mmp: enable rtc clk in pxa168

[Haojian Zhuang]

Enable clk of rtc-sa1100 device in pxa168.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-mmp/pxa168.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 9f61256..aa62d0c 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -65,6 +65,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
 static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
+static APBC_CLK(rtc, PXA168_RTC, 8, 32768);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(lcd, LCD, 0x7f, 312000000);
@@ -93,6 +94,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
+	INIT_CLKREG(&clk_rtc, "sa1100-rtc", NULL),
 };
 
 static int __init pxa168_init(void)
-- 
1.7.0.4

[PATCH 6/8] ARM: mmp: append OF support on pxa168

[Haojian Zhuang]

Enable PXA168 and aspenite support.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-mmp/Kconfig  |   10 ++++++
 arch/arm/mach-mmp/Makefile |    1 +
 arch/arm/mach-mmp/mmp-dt.c |   75 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mmp/mmp-dt.c

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 323d4c9..5a90b9a 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -2,6 +2,16 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implmentations"
 
+config MACH_MMP_DT
+	bool "Support MMP2 platforms from device tree"
+	select CPU_PXA168
+	select CPU_PXA910
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	select CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index ba254a7..4fc0ff5 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -18,5 +18,6 @@ obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
 obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
new file mode 100644
index 0000000..6707539
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mach-mmp/mmp-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+extern struct sys_timer pxa168_timer;
+extern void __init icu_init_irq(void);
+
+static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+	{}
+};
+
+static int __init mmp_intc_add_irq_domain(struct device_node *np,
+					   struct device_node *parent)
+{
+	irq_domain_add_simple(np, 0);
+	return 0;
+}
+
+static int __init mmp_gpio_add_irq_domain(struct device_node *np,
+					   struct device_node *parent)
+{
+	irq_domain_add_simple(np, IRQ_GPIO_START);
+	return 0;
+}
+
+static const struct of_device_id mmp_irq_match[] __initconst = {
+	{ .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
+	{ .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
+	{}
+};
+
+static void __init mmp_dt_init(void)
+{
+
+	of_irq_init(mmp_irq_match);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     mmp_auxdata_lookup, NULL);
+}
+
+static const char *pxa168_dt_board_compat[] __initdata = {
+	"mrvl,pxa168-aspenite",
+	NULL,
+};
+
+DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= icu_init_irq,
+	.timer		= &pxa168_timer,
+	.init_machine	= mmp_dt_init,
+	.dt_compat	= pxa168_dt_board_compat,
+MACHINE_END
-- 
1.7.0.4

[PATCH 6/8] ARM: mmp: append OF support on pxa168

[Haojian Zhuang]

Enable PXA168 and aspenite support.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/mach-mmp/Kconfig  |   10 ++++++
 arch/arm/mach-mmp/Makefile |    1 +
 arch/arm/mach-mmp/mmp-dt.c |   75 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mmp/mmp-dt.c

diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 323d4c9..5a90b9a 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -2,6 +2,16 @@ if ARCH_MMP
 
 menu "Marvell PXA168/910/MMP2 Implmentations"
 
+config MACH_MMP_DT
+	bool "Support MMP2 platforms from device tree"
+	select CPU_PXA168
+	select CPU_PXA910
+	select USE_OF
+	help
+	  Include support for Marvell MMP2 based platforms using
+	  the device tree. Needn't select any other machine while
+	  MACH_MMP_DT is enabled.
+
 config MACH_ASPENITE
 	bool "Marvell's PXA168 Aspenite Development Board"
 	select CPU_PXA168
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index ba254a7..4fc0ff5 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -18,5 +18,6 @@ obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
 obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
+obj-$(CONFIG_MACH_MMP_DT)	+= mmp-dt.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
 obj-$(CONFIG_MACH_GPLUGD)	+= gplugd.o
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
new file mode 100644
index 0000000..6707539
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mach-mmp/mmp-dt.c
+ *
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+extern struct sys_timer pxa168_timer;
+extern void __init icu_init_irq(void);
+
+static const struct of_dev_auxdata mmp_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4026000, "pxa2xx-uart.2", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4011000, "pxa2xx-i2c.0", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-twsi", 0xd4025000, "pxa2xx-i2c.1", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-gpio", 0xd4019000, "pxa-gpio", NULL),
+	OF_DEV_AUXDATA("mrvl,mmp-rtc", 0xd4010000, "sa1100-rtc", NULL),
+	{}
+};
+
+static int __init mmp_intc_add_irq_domain(struct device_node *np,
+					   struct device_node *parent)
+{
+	irq_domain_add_simple(np, 0);
+	return 0;
+}
+
+static int __init mmp_gpio_add_irq_domain(struct device_node *np,
+					   struct device_node *parent)
+{
+	irq_domain_add_simple(np, IRQ_GPIO_START);
+	return 0;
+}
+
+static const struct of_device_id mmp_irq_match[] __initconst = {
+	{ .compatible = "mrvl,mmp-intc", .data = mmp_intc_add_irq_domain, },
+	{ .compatible = "mrvl,mmp-gpio", .data = mmp_gpio_add_irq_domain, },
+	{}
+};
+
+static void __init mmp_dt_init(void)
+{
+
+	of_irq_init(mmp_irq_match);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			     mmp_auxdata_lookup, NULL);
+}
+
+static const char *pxa168_dt_board_compat[] __initdata = {
+	"mrvl,pxa168-aspenite",
+	NULL,
+};
+
+DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
+	.map_io		= mmp_map_io,
+	.init_irq	= icu_init_irq,
+	.timer		= &pxa168_timer,
+	.init_machine	= mmp_dt_init,
+	.dt_compat	= pxa168_dt_board_compat,
+MACHINE_END
-- 
1.7.0.4

[PATCH 7/8] ARM: dts: append DTS file of pxa168

[Haojian Zhuang]

DTS files of both PXA168 and aspenite are appended.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/boot/dts/pxa168-aspenite.dts |   38 +++++++++++++
 arch/arm/boot/dts/pxa168.dtsi         |   96 +++++++++++++++++++++++++++++++++
 2 files changed, 134 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/pxa168-aspenite.dts
 create mode 100644 arch/arm/boot/dts/pxa168.dtsi

diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts
new file mode 100644
index 0000000..e762fac
--- /dev/null
+++ b/arch/arm/boot/dts/pxa168-aspenite.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa168.dtsi"
+
+/ {
+	model = "Marvell PXA168 Aspenite Development Board";
+	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc {
+		apb at d4000000 {
+			uart1: uart at d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c at d4011000 {
+				status = "okay";
+			};
+			rtc: rtc at d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
new file mode 100644
index 0000000..e624c10
--- /dev/null
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -0,0 +1,96 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	intc: intc-interrupt-controller at d4282000 {
+		compatible = "mrvl,mmp-intc", "mrvl,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xd4282000 0x1000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		apb at d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			uart1: uart at d4017000 {
+				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart at d4018000 {
+				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart at d4026000 {
+				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				reg = <0xd4026000 0x1000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			gpio: gpio at d4019000 {
+				compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+				reg = <0xd4019000 0x1000>;
+				interrupts = <49>;
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				mrvl,gpio-irq0 = <17>;
+				mrvl,gpio-irq1 = <18>;
+			};
+
+			twsi1: i2c at d4011000 {
+				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-mode = "fast";
+				status = "disabled";
+			};
+
+			twsi2: i2c at d4025000 {
+				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				status = "disabled";
+			};
+
+			rtc: rtc at d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <6 5>;
+				status = "disabled";
+			};
+		};
+	};
+};
-- 
1.7.0.4

[PATCH 7/8] ARM: dts: append DTS file of pxa168

[Haojian Zhuang]

DTS files of both PXA168 and aspenite are appended.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 arch/arm/boot/dts/pxa168-aspenite.dts |   38 +++++++++++++
 arch/arm/boot/dts/pxa168.dtsi         |   96 +++++++++++++++++++++++++++++++++
 2 files changed, 134 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/pxa168-aspenite.dts
 create mode 100644 arch/arm/boot/dts/pxa168.dtsi

diff --git a/arch/arm/boot/dts/pxa168-aspenite.dts b/arch/arm/boot/dts/pxa168-aspenite.dts
new file mode 100644
index 0000000..e762fac
--- /dev/null
+++ b/arch/arm/boot/dts/pxa168-aspenite.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "pxa168.dtsi"
+
+/ {
+	model = "Marvell PXA168 Aspenite Development Board";
+	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart1: uart@d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
new file mode 100644
index 0000000..e624c10
--- /dev/null
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -0,0 +1,96 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	intc: intc-interrupt-controller@d4282000 {
+		compatible = "mrvl,mmp-intc", "mrvl,intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xd4282000 0x1000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			uart1: uart@d4017000 {
+				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4018000 {
+				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4026000 {
+				compatible = "mrvl,mmp-uart", "mrvl,pxa-uart";
+				reg = <0xd4026000 0x1000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			gpio: gpio@d4019000 {
+				compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+				reg = <0xd4019000 0x1000>;
+				interrupts = <49>;
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				mrvl,gpio-irq0 = <17>;
+				mrvl,gpio-irq1 = <18>;
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				mrvl,i2c-mode = "fast";
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <6 5>;
+				status = "disabled";
+			};
+		};
+	};
+};
-- 
1.7.0.4

[PATCH 8/8] Document: devicetree: add OF documents for arch-mmp

[Haojian Zhuang]

Add OF support in Document/devicetree directory.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 Documentation/devicetree/bindings/arm/mrvl.txt     |    6 +++
 .../devicetree/bindings/gpio/mrvl-gpio.txt         |   27 ++++++++++++++
 Documentation/devicetree/bindings/i2c/mrvl-i2c.txt |   37 ++++++++++++++++++++
 .../devicetree/bindings/rtc/sa1100-rtc.txt         |   15 ++++++++
 4 files changed, 85 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/mrvl.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/sa1100-rtc.txt

diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl.txt
new file mode 100644
index 0000000..d8de933
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl.txt
@@ -0,0 +1,6 @@
+Marvell Platforms Device Tree Bindings
+----------------------------------------------------
+
+PXA168 Aspenite Board
+Required root node properties:
+	- compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
new file mode 100644
index 0000000..c2c7995
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -0,0 +1,27 @@
+* Marvell PXA GPIO controller
+
+Required properties:
+- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all gpio pins, if
+  one number.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be one.  It is the pin number.
+
+Recommended properties:
+- mrvl,gpio-irq0: Should be interrupt number of gpio0 in pxa2xx/pxa3xx/pxa95x.
+- mrvl,gpio-irq1: should be interrupt number of gpio1 in pxa2xx/pxa3xx/pxa95x.
+
+Example:
+
+	gpio: gpio at d4019000 {
+		compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+		reg = <0xd4019000 0x1000>;
+		interrupts = <49>;
+		gpio-controller;
+		#gpio-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		mrvl,gpio-irq0 = <17>;
+		mrvl,gpio-irq1 = <18>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
new file mode 100644
index 0000000..699c7ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -0,0 +1,37 @@
+* I2C
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+   compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
+   For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
+   as shown in the example below.
+
+Recommended properties :
+
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
+   status register of i2c controller instead.
+ - mrvl,i2c-mode : "fast" means fast mode of i2c controller.
+
+Examples:
+	twsi1: i2c at d4011000 {
+		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		reg = <0xd4011000 0x1000>;
+		interrupts = <7>;
+		mrvl,i2c-mode = "fast";
+	};
+	
+	twsi2: i2c at d4025000 {
+		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		reg = <0xd4025000 0x1000>;
+		interrupts = <58>;
+	};
+
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
new file mode 100644
index 0000000..f3a0118
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
@@ -0,0 +1,15 @@
+* Marvell Real Time Clock controller
+
+Required properties:
+- compatible: should be "mrvl,sa1100-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Should be two. The first interrupt number is the rtc alarm
+  interrupt and the second interrupt number is the rtc hz interrupt.
+
+Example:
+	rtc: rtc at d4010000 {
+		compatible = "mrvl,mmp-rtc";
+		reg = <0xd4010000 0x1000>;
+		interrupts = <6 5>;
+	};
-- 
1.7.0.4

[PATCH 8/8] Document: devicetree: add OF documents for arch-mmp

[Haojian Zhuang]

Add OF support in Document/devicetree directory.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
---
 Documentation/devicetree/bindings/arm/mrvl.txt     |    6 +++
 .../devicetree/bindings/gpio/mrvl-gpio.txt         |   27 ++++++++++++++
 Documentation/devicetree/bindings/i2c/mrvl-i2c.txt |   37 ++++++++++++++++++++
 .../devicetree/bindings/rtc/sa1100-rtc.txt         |   15 ++++++++
 4 files changed, 85 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/mrvl.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/sa1100-rtc.txt

diff --git a/Documentation/devicetree/bindings/arm/mrvl.txt b/Documentation/devicetree/bindings/arm/mrvl.txt
new file mode 100644
index 0000000..d8de933
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl.txt
@@ -0,0 +1,6 @@
+Marvell Platforms Device Tree Bindings
+----------------------------------------------------
+
+PXA168 Aspenite Board
+Required root node properties:
+	- compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
new file mode 100644
index 0000000..c2c7995
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
@@ -0,0 +1,27 @@
+* Marvell PXA GPIO controller
+
+Required properties:
+- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all gpio pins, if
+  one number.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be one.  It is the pin number.
+
+Recommended properties:
+- mrvl,gpio-irq0: Should be interrupt number of gpio0 in pxa2xx/pxa3xx/pxa95x.
+- mrvl,gpio-irq1: should be interrupt number of gpio1 in pxa2xx/pxa3xx/pxa95x.
+
+Example:
+
+	gpio: gpio@d4019000 {
+		compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+		reg = <0xd4019000 0x1000>;
+		interrupts = <49>;
+		gpio-controller;
+		#gpio-cells = <1>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		mrvl,gpio-irq0 = <17>;
+		mrvl,gpio-irq1 = <18>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
new file mode 100644
index 0000000..699c7ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -0,0 +1,37 @@
+* I2C
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+   compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
+   For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
+   as shown in the example below.
+
+Recommended properties :
+
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
+   status register of i2c controller instead.
+ - mrvl,i2c-mode : "fast" means fast mode of i2c controller.
+
+Examples:
+	twsi1: i2c@d4011000 {
+		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		reg = <0xd4011000 0x1000>;
+		interrupts = <7>;
+		mrvl,i2c-mode = "fast";
+	};
+	
+	twsi2: i2c@d4025000 {
+		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		reg = <0xd4025000 0x1000>;
+		interrupts = <58>;
+	};
+
diff --git a/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
new file mode 100644
index 0000000..f3a0118
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
@@ -0,0 +1,15 @@
+* Marvell Real Time Clock controller
+
+Required properties:
+- compatible: should be "mrvl,sa1100-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: Should be two. The first interrupt number is the rtc alarm
+  interrupt and the second interrupt number is the rtc hz interrupt.
+
+Example:
+	rtc: rtc@d4010000 {
+		compatible = "mrvl,mmp-rtc";
+		reg = <0xd4010000 0x1000>;
+		interrupts = <6 5>;
+	};
-- 
1.7.0.4