[PATCH V3 0/2] Support for HTKW mcx

[PATCH V3 0/2] Support for HTKW mcx

[Ilya Yanok]

Split into two parts:
 1. Device tree only to be used with board-generic (only serial works)
 2. Full board support via custom machine file for board-testing

Sorry for double-posting: I've put wrong linux-arm-kernel address in
the first post.

Ilya Yanok (2):
  mcx: very basic support for HTKW mcx board
  mcx: support for HTKW mcx board

 arch/arm/boot/dts/mcx.dts                    |   27 ++
 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-mcx.c              |  500 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 5 files changed, 535 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/mcx.dts
 create mode 100644 arch/arm/mach-omap2/board-mcx.c

-- 
1.7.6.4

[PATCH V3 0/2] Support for HTKW mcx

[Ilya Yanok]

Split into two parts:
 1. Device tree only to be used with board-generic (only serial works)
 2. Full board support via custom machine file for board-testing

Sorry for double-posting: I've put wrong linux-arm-kernel address in
the first post.

Ilya Yanok (2):
  mcx: very basic support for HTKW mcx board
  mcx: support for HTKW mcx board

 arch/arm/boot/dts/mcx.dts                    |   27 ++
 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-mcx.c              |  500 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 5 files changed, 535 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/mcx.dts
 create mode 100644 arch/arm/mach-omap2/board-mcx.c

-- 
1.7.6.4

[PATCH V3 1/2] mcx: very basic support for HTKW mcx board

[Ilya Yanok]

Very basic support for HTKW mcx board. Able to boot via board-generic
and ramdisk/initramfs, however most of peripherals is unsupported.
Produces tons of twl4030 related errors as this board doesn't have
twl4030 installed.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

---
Changes from V2:

 - None

Changes from V1:

 - device tree move to the separate patch
 - iva node is disabled instead of using custom includes
 - removed bootargs entry

 arch/arm/boot/dts/mcx.dts |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/mcx.dts

diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
new file mode 100644
index 0000000..66b81bd
--- /dev/null
+++ b/arch/arm/boot/dts/mcx.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "HTKW mcx";
+	compatible = "htkw,mcx", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* AM35xx doesn't have IVA */
+	soc {
+		iva {
+			status = "disabled";
+		};
+	};
+};
-- 
1.7.6.4

[PATCH V3 1/2] mcx: very basic support for HTKW mcx board

[Ilya Yanok]

Very basic support for HTKW mcx board. Able to boot via board-generic
and ramdisk/initramfs, however most of peripherals is unsupported.
Produces tons of twl4030 related errors as this board doesn't have
twl4030 installed.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

---
Changes from V2:

 - None

Changes from V1:

 - device tree move to the separate patch
 - iva node is disabled instead of using custom includes
 - removed bootargs entry

 arch/arm/boot/dts/mcx.dts |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/mcx.dts

diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
new file mode 100644
index 0000000..66b81bd
--- /dev/null
+++ b/arch/arm/boot/dts/mcx.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "HTKW mcx";
+	compatible = "htkw,mcx", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* AM35xx doesn't have IVA */
+	soc {
+		iva {
+			status = "disabled";
+		};
+	};
+};
-- 
1.7.6.4

Re: [PATCH V3 1/2] mcx: very basic support for HTKW mcx board

[Tony Lindgren]

* Ilya Yanok <yanok@emcraft.com> [111221 07:22]:
> Very basic support for HTKW mcx board. Able to boot via board-generic
> and ramdisk/initramfs, however most of peripherals is unsupported.
> Produces tons of twl4030 related errors as this board doesn't have
> twl4030 installed.
> 
> Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Grant, care to ack this one?

Regards,

Tony

> 
> ---
> Changes from V2:
> 
>  - None
> 
> Changes from V1:
> 
>  - device tree move to the separate patch
>  - iva node is disabled instead of using custom includes
>  - removed bootargs entry
> 
>  arch/arm/boot/dts/mcx.dts |   27 +++++++++++++++++++++++++++
>  1 files changed, 27 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/mcx.dts
> 
> diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
> new file mode 100644
> index 0000000..66b81bd
> --- /dev/null
> +++ b/arch/arm/boot/dts/mcx.dts
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +
> +/ {
> +	model = "HTKW mcx";
> +	compatible = "htkw,mcx", "ti,omap3";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x10000000>; /* 256 MB */
> +	};
> +
> +	/* AM35xx doesn't have IVA */
> +	soc {
> +		iva {
> +			status = "disabled";
> +		};
> +	};
> +};
> -- 
> 1.7.6.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 1/2] mcx: very basic support for HTKW mcx board

[Tony Lindgren]

* Ilya Yanok <yanok@emcraft.com> [111221 07:22]:
> Very basic support for HTKW mcx board. Able to boot via board-generic
> and ramdisk/initramfs, however most of peripherals is unsupported.
> Produces tons of twl4030 related errors as this board doesn't have
> twl4030 installed.
> 
> Signed-off-by: Ilya Yanok <yanok@emcraft.com>

Grant, care to ack this one?

Regards,

Tony

> 
> ---
> Changes from V2:
> 
>  - None
> 
> Changes from V1:
> 
>  - device tree move to the separate patch
>  - iva node is disabled instead of using custom includes
>  - removed bootargs entry
> 
>  arch/arm/boot/dts/mcx.dts |   27 +++++++++++++++++++++++++++
>  1 files changed, 27 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/mcx.dts
> 
> diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
> new file mode 100644
> index 0000000..66b81bd
> --- /dev/null
> +++ b/arch/arm/boot/dts/mcx.dts
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap3.dtsi"
> +
> +/ {
> +	model = "HTKW mcx";
> +	compatible = "htkw,mcx", "ti,omap3";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x10000000>; /* 256 MB */
> +	};
> +
> +	/* AM35xx doesn't have IVA */
> +	soc {
> +		iva {
> +			status = "disabled";
> +		};
> +	};
> +};
> -- 
> 1.7.6.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V3 1/2] mcx: very basic support for HTKW mcx board

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [120305 11:21]:
> * Ilya Yanok <yanok@emcraft.com> [111221 07:22]:
> > Very basic support for HTKW mcx board. Able to boot via board-generic
> > and ramdisk/initramfs, however most of peripherals is unsupported.
> > Produces tons of twl4030 related errors as this board doesn't have
> > twl4030 installed.
> > 
> > Signed-off-by: Ilya Yanok <yanok@emcraft.com>
> 
> Grant, care to ack this one?

Actually a version of this you already acked as
"[PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board"
so using that instead

Regards,

Tony

> > ---
> > Changes from V2:
> > 
> >  - None
> > 
> > Changes from V1:
> > 
> >  - device tree move to the separate patch
> >  - iva node is disabled instead of using custom includes
> >  - removed bootargs entry
> > 
> >  arch/arm/boot/dts/mcx.dts |   27 +++++++++++++++++++++++++++
> >  1 files changed, 27 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/mcx.dts
> > 
> > diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
> > new file mode 100644
> > index 0000000..66b81bd
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/mcx.dts
> > @@ -0,0 +1,27 @@
> > +/*
> > + * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +/dts-v1/;
> > +
> > +/include/ "omap3.dtsi"
> > +
> > +/ {
> > +	model = "HTKW mcx";
> > +	compatible = "htkw,mcx", "ti,omap3";
> > +
> > +	memory {
> > +		device_type = "memory";
> > +		reg = <0x80000000 0x10000000>; /* 256 MB */
> > +	};
> > +
> > +	/* AM35xx doesn't have IVA */
> > +	soc {
> > +		iva {
> > +			status = "disabled";
> > +		};
> > +	};
> > +};
> > -- 
> > 1.7.6.4
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 1/2] mcx: very basic support for HTKW mcx board

[Tony Lindgren]

* Tony Lindgren <tony@atomide.com> [120305 11:21]:
> * Ilya Yanok <yanok@emcraft.com> [111221 07:22]:
> > Very basic support for HTKW mcx board. Able to boot via board-generic
> > and ramdisk/initramfs, however most of peripherals is unsupported.
> > Produces tons of twl4030 related errors as this board doesn't have
> > twl4030 installed.
> > 
> > Signed-off-by: Ilya Yanok <yanok@emcraft.com>
> 
> Grant, care to ack this one?

Actually a version of this you already acked as
"[PATCH 1/2] mt_ventoux: very basic support for TeeJet Mt.Ventoux board"
so using that instead

Regards,

Tony

> > ---
> > Changes from V2:
> > 
> >  - None
> > 
> > Changes from V1:
> > 
> >  - device tree move to the separate patch
> >  - iva node is disabled instead of using custom includes
> >  - removed bootargs entry
> > 
> >  arch/arm/boot/dts/mcx.dts |   27 +++++++++++++++++++++++++++
> >  1 files changed, 27 insertions(+), 0 deletions(-)
> >  create mode 100644 arch/arm/boot/dts/mcx.dts
> > 
> > diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
> > new file mode 100644
> > index 0000000..66b81bd
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/mcx.dts
> > @@ -0,0 +1,27 @@
> > +/*
> > + * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + */
> > +/dts-v1/;
> > +
> > +/include/ "omap3.dtsi"
> > +
> > +/ {
> > +	model = "HTKW mcx";
> > +	compatible = "htkw,mcx", "ti,omap3";
> > +
> > +	memory {
> > +		device_type = "memory";
> > +		reg = <0x80000000 0x10000000>; /* 256 MB */
> > +	};
> > +
> > +	/* AM35xx doesn't have IVA */
> > +	soc {
> > +		iva {
> > +			status = "disabled";
> > +		};
> > +	};
> > +};
> > -- 
> > 1.7.6.4
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo at vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 2/2] mcx: support for HTKW mcx board

[Ilya Yanok]

Support for the HTKW mcx board (TI AM3517 based) including serial,
Ethernet, I2C, USB host, HSMMC, DSS and RTC.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

---
Requires updated machine-type file, recently posted AM35xx-EMAC patch
and "Disable PM init on AM35{05,17} patch.

Changes from V2:
 - Rebased onto the current linux-omap/master
  - Added "common.h" include
  - Added .handle_irq field to machine description
  - Added omap_sdrc_init() call
 - Removed unneeded pullup from output pins
 - Moved pin muxing before GPIO accesses
 - Removed .ocr_mask field (it's overwritten anyway)
 - Moved touchscreen init out of I2C init
 - some readability improvements (empty lines, comments)

Changes from V1:
 - Kconfig option name fixed
 - Makefile entry sanitized
 - Unneeded headers removed
 - EMAC initialization moved to separate file/patch
 - Use gpio_{request,free}_{array,one} where possible
 - don't use platform data for touchscreen, we only need to pass
   irq number, do it via client.irq
 - check mcx_ts_init return value
 - Moved DEBUG_LL_OMAP3 entry to be in aplhabetical order
 - check return value of gpio_request for USB pwr pin
 - use pr_err instead of printk for error printing
 - added a fixed regulator for vdds_dsi
 - added SDcard card-detect pin

 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-mcx.c              |  500 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 4 files changed, 508 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-mcx.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0eb27b2..fd9b8c0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -231,6 +231,12 @@ config MACH_OMAP_3430SDP
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_MCX
+	bool "HTKW mcx (AM3517 based) board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CBB
+	select REGULATOR_FIXED_VOLTAGE
+
 config MACH_NOKIA_N800
        bool
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d75cb5..9405dfc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -238,6 +238,7 @@ obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
 obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
 obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
+obj-$(CONFIG_MACH_MCX)			+= board-mcx.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-mcx.c b/arch/arm/mach-omap2/board-mcx.c
new file mode 100644
index 0000000..70c4339
--- /dev/null
+++ b/arch/arm/mach-omap2/board-mcx.c
@@ -0,0 +1,500 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+#include <plat/usb.h>
+
+#include "am35xx-emac.h"
+#include "mux.h"
+#include "control.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+#include "common.h"
+
+#define MCX_MDIO_FREQUENCY	(1000000)
+
+static struct mtd_partition mcx_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+#define LCD_PWR_ENn		131
+#define HDMI_TRCVR_PDn		133
+#define LCD_BKLIGHT_EN		55
+#define LCD_LVL_SFHT_BUF_ENn	43
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int mcx_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		pr_err("cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(LCD_BKLIGHT_EN, 1);
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void mcx_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(LCD_BKLIGHT_EN, 0);
+	lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd_panel = {
+	.name			= "focaltech_etm070003dh6",
+	.platform_enable	= mcx_panel_enable_lcd,
+	.platform_disable	= mcx_panel_disable_lcd,
+};
+
+static struct omap_dss_device mcx_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+/*
+ * TV Output
+ */
+
+static int mcx_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void mcx_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device mcx_tv_device = {
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.name			= "tv",
+	.driver_name		= "venc",
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= mcx_panel_enable_tv,
+	.platform_disable	= mcx_panel_disable_tv,
+};
+
+/*
+ * DVI/HDMI Output
+ */
+
+static int mcx_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		pr_err("cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+	gpio_set_value(HDMI_TRCVR_PDn, 1);
+	return 0;
+}
+
+static void mcx_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+	gpio_set_value(HDMI_TRCVR_PDn, 0);
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+	.platform_enable	= mcx_panel_enable_dvi,
+	.platform_disable	= mcx_panel_disable_dvi,
+};
+static struct omap_dss_device mcx_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "dvi",
+	.data			= &dvi_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+static struct omap_dss_device *mcx_dss_devices[] = {
+	&mcx_lcd_device,
+	&mcx_tv_device,
+	&mcx_dvi_device,
+};
+
+static struct omap_dss_board_info mcx_dss_data = {
+	.num_devices	= ARRAY_SIZE(mcx_dss_devices),
+	.devices	= mcx_dss_devices,
+	.default_device	= &mcx_lcd_device,
+};
+
+/*
+ * use fake regulator for vdds_dsi as we can't find this pin inside
+ * AM3517 datasheet.
+ */
+static struct regulator_consumer_supply mcx_vdds_dsi_supply[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+};
+
+static struct regulator_init_data mcx_vdds_dsi = {
+	.constraints		= {
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.always_on		= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mcx_vdds_dsi_supply),
+	.consumer_supplies	= mcx_vdds_dsi_supply,
+};
+
+static struct fixed_voltage_config mcx_display = {
+	.supply_name		= "display",
+	.microvolts		= 1800000,
+	.gpio			= -EINVAL,
+	.enabled_at_boot	= 1,
+	.init_data		= &mcx_vdds_dsi,
+};
+
+static struct platform_device mcx_display_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mcx_display,
+	},
+};
+
+static struct gpio mcx_dss_gpios[] __initdata = {
+	{ LCD_BKLIGHT_EN, GPIOF_OUT_INIT_LOW, "lcd backlight enable"	},
+	{ LCD_LVL_SFHT_BUF_ENn, GPIOF_OUT_INIT_LOW, "lcd lvl shifter"	},
+	{ LCD_PWR_ENn, GPIOF_OUT_INIT_LOW, "lcd power enable"		},
+	{ HDMI_TRCVR_PDn, GPIOF_OUT_INIT_LOW, "HDMI trcvr power"	},
+};
+
+static void __init mcx_display_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(LCD_BKLIGHT_EN, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(LCD_LVL_SFHT_BUF_ENn, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(LCD_PWR_ENn, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_TRCVR_PDn, OMAP_PIN_OUTPUT);
+
+	r = gpio_request_array(mcx_dss_gpios, ARRAY_SIZE(mcx_dss_gpios));
+	if (r) {
+		pr_err("failed to get DSS control GPIOs\n");
+		return;
+	}
+
+	r = omap_display_init(&mcx_dss_data);
+	if (r) {
+		pr_err("Failed to register DSS device\n");
+		gpio_free_array(mcx_dss_gpios, ARRAY_SIZE(mcx_dss_gpios));
+	}
+}
+
+/* TPS65023 specific initialization */
+/* VDCDC1 -> VDD_CORE */
+static struct regulator_consumer_supply am3517_vdcdc1_supplies[] = {
+	{
+		.supply = "vdd_core",
+	},
+};
+
+/* VDCDC2 -> VDDSHV */
+static struct regulator_consumer_supply am3517_vdcdc2_supplies[] = {
+	{
+		.supply = "vddshv",
+	},
+};
+
+/*
+ * VDCDC2 |-> VDDS
+ *	  |-> VDDS_SRAM_CORE_BG
+ *	  |-> VDDS_SRAM_MPU
+ */
+static struct regulator_consumer_supply am3517_vdcdc3_supplies[] = {
+	{
+		.supply = "vdds",
+	},
+	{
+		.supply = "vdds_sram_core_bg",
+	},
+	{
+		.supply = "vdds_sram_mpu",
+	},
+};
+
+/*
+ * LDO1 |-> VDDA1P8V_USBPHY
+ *	|-> VDDA_DAC
+ */
+static struct regulator_consumer_supply am3517_ldo1_supplies[] = {
+	{
+		.supply = "vdda1p8v_usbphy",
+	},
+	{
+		.supply = "vdda_dac",
+	},
+};
+
+/* LDO2 -> VDDA3P3V_USBPHY */
+static struct regulator_consumer_supply am3517_ldo2_supplies[] = {
+	{
+		.supply = "vdda3p3v_usbphy",
+	},
+};
+
+static struct regulator_init_data mcx_regulator_data[] = {
+	/* DCDC1 */
+	{
+		.constraints = {
+			.min_uV = 1200000,
+			.max_uV = 1200000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc1_supplies),
+		.consumer_supplies = am3517_vdcdc1_supplies,
+	},
+	/* DCDC2 */
+	{
+		.constraints = {
+			.min_uV = 3300000,
+			.max_uV = 3300000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc2_supplies),
+		.consumer_supplies = am3517_vdcdc2_supplies,
+	},
+	/* DCDC3 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc3_supplies),
+		.consumer_supplies = am3517_vdcdc3_supplies,
+	},
+	/* LDO1 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = false,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_ldo1_supplies),
+		.consumer_supplies = am3517_ldo1_supplies,
+	},
+	/* LDO2 */
+	{
+		.constraints = {
+			.min_uV = 3300000,
+			.max_uV = 3300000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = false,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_ldo2_supplies),
+		.consumer_supplies = am3517_ldo2_supplies,
+	},
+};
+
+static struct i2c_board_info __initdata mcx_i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+	{
+		I2C_BOARD_INFO("tps65023", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.platform_data = &mcx_regulator_data[0],
+	},
+};
+
+#define TOUCH_INT_GPIO	170
+
+static int __init mcx_ts_init(void)
+{
+	struct i2c_board_info mcx_edt_ts[] = {
+		{
+			I2C_BOARD_INFO("edt_ts", 0x38),
+			.irq = gpio_to_irq(TOUCH_INT_GPIO),
+		},
+	};
+	int err;
+
+	omap_mux_init_gpio(TOUCH_INT_GPIO, OMAP_PIN_INPUT);
+	err = gpio_request_one(TOUCH_INT_GPIO, GPIOF_IN, "TOUCH_INT");
+	if (err < 0) {
+		pr_err("failed to get TOUCH_INT gpio\n");
+		return -ENODEV;
+	}
+
+	return i2c_register_board_info(3, mcx_edt_ts, 1);
+}
+
+static void __init mcx_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, mcx_i2c1_devices,
+			ARRAY_SIZE(mcx_i2c1_devices));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+}
+
+#define USB_HOST_PWR_EN		132
+#define USB_PHY1_RESET		154
+#define USB_PHY2_RESET		152
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = USB_PHY1_RESET,
+	.reset_gpio_port[1]  = USB_PHY2_RESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#define SD_CARD_CD		61
+#define SD_CARD_WP		65
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd        = SD_CARD_CD,
+		.gpio_wp        = SD_CARD_WP,
+	},
+	{}      /* Terminator */
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(CHASSIS_DMAREQ3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static struct platform_device *mcx_devices[] __initdata = {
+	&mcx_display_device,
+};
+
+static void __init mcx_init(void)
+{
+	int err;
+
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	mcx_i2c_init();
+	platform_add_devices(mcx_devices, ARRAY_SIZE(mcx_devices));
+	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
+
+	mcx_display_init();
+
+	/* Configure EHCI ports */
+	omap_mux_init_gpio(USB_HOST_PWR_EN, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(USB_PHY1_RESET, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(USB_PHY2_RESET, OMAP_PIN_OUTPUT);
+	err = gpio_request_one(USB_HOST_PWR_EN, GPIOF_OUT_INIT_HIGH,
+			"USB_HOST_PWR_EN");
+	if (err)
+		pr_warn("Failed to request USB host power enable GPIO\n");
+
+	usbhs_init(&usbhs_bdata);
+
+	/* NAND */
+	omap_nand_flash_init(NAND_BUSWIDTH_16, mcx_nand_partitions,
+			     ARRAY_SIZE(mcx_nand_partitions));
+	/* Ethernet */
+	am35xx_ethernet_init(MCX_MDIO_FREQUENCY, 1);
+
+	/* MMC init */
+	omap_mux_init_gpio(SD_CARD_WP, OMAP_PIN_INPUT);
+	omap_mux_init_gpio(SD_CARD_CD, OMAP_PIN_INPUT);
+	omap2_hsmmc_init(mmc);
+
+	/* touchscreen init */
+	err = mcx_ts_init();
+	if (err < 0)
+		pr_err("failed to register touchscreen device\n");
+}
+
+static const char *mcx_dt_match[] __initdata = {
+	"htkw,mcx",
+	NULL
+};
+
+MACHINE_START(MCX, "htkw mcx")
+	/* Maintainer: Ilya Yanok */
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= mcx_init,
+	.timer		= &omap3_timer,
+	.dt_compat	= mcx_dt_match,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 27d9d31..1141364 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP3(3, encore);
 		DEBUG_LL_OMAP3(3, igep0020);
 		DEBUG_LL_OMAP3(3, igep0030);
+		DEBUG_LL_OMAP3(3, mcx);
 		DEBUG_LL_OMAP3(3, nokia_rm680);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
-- 
1.7.6.4

[PATCH V3 2/2] mcx: support for HTKW mcx board

[Ilya Yanok]

Support for the HTKW mcx board (TI AM3517 based) including serial,
Ethernet, I2C, USB host, HSMMC, DSS and RTC.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

---
Requires updated machine-type file, recently posted AM35xx-EMAC patch
and "Disable PM init on AM35{05,17} patch.

Changes from V2:
 - Rebased onto the current linux-omap/master
  - Added "common.h" include
  - Added .handle_irq field to machine description
  - Added omap_sdrc_init() call
 - Removed unneeded pullup from output pins
 - Moved pin muxing before GPIO accesses
 - Removed .ocr_mask field (it's overwritten anyway)
 - Moved touchscreen init out of I2C init
 - some readability improvements (empty lines, comments)

Changes from V1:
 - Kconfig option name fixed
 - Makefile entry sanitized
 - Unneeded headers removed
 - EMAC initialization moved to separate file/patch
 - Use gpio_{request,free}_{array,one} where possible
 - don't use platform data for touchscreen, we only need to pass
   irq number, do it via client.irq
 - check mcx_ts_init return value
 - Moved DEBUG_LL_OMAP3 entry to be in aplhabetical order
 - check return value of gpio_request for USB pwr pin
 - use pr_err instead of printk for error printing
 - added a fixed regulator for vdds_dsi
 - added SDcard card-detect pin

 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-mcx.c              |  500 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 4 files changed, 508 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-mcx.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0eb27b2..fd9b8c0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -231,6 +231,12 @@ config MACH_OMAP_3430SDP
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_MCX
+	bool "HTKW mcx (AM3517 based) board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CBB
+	select REGULATOR_FIXED_VOLTAGE
+
 config MACH_NOKIA_N800
        bool
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d75cb5..9405dfc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -238,6 +238,7 @@ obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
 obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
 obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
+obj-$(CONFIG_MACH_MCX)			+= board-mcx.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-mcx.c b/arch/arm/mach-omap2/board-mcx.c
new file mode 100644
index 0000000..70c4339
--- /dev/null
+++ b/arch/arm/mach-omap2/board-mcx.c
@@ -0,0 +1,500 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+#include <plat/usb.h>
+
+#include "am35xx-emac.h"
+#include "mux.h"
+#include "control.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+#include "common.h"
+
+#define MCX_MDIO_FREQUENCY	(1000000)
+
+static struct mtd_partition mcx_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+#define LCD_PWR_ENn		131
+#define HDMI_TRCVR_PDn		133
+#define LCD_BKLIGHT_EN		55
+#define LCD_LVL_SFHT_BUF_ENn	43
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int mcx_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		pr_err("cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(LCD_BKLIGHT_EN, 1);
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void mcx_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(LCD_BKLIGHT_EN, 0);
+	lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd_panel = {
+	.name			= "focaltech_etm070003dh6",
+	.platform_enable	= mcx_panel_enable_lcd,
+	.platform_disable	= mcx_panel_disable_lcd,
+};
+
+static struct omap_dss_device mcx_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+/*
+ * TV Output
+ */
+
+static int mcx_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void mcx_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device mcx_tv_device = {
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.name			= "tv",
+	.driver_name		= "venc",
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= mcx_panel_enable_tv,
+	.platform_disable	= mcx_panel_disable_tv,
+};
+
+/*
+ * DVI/HDMI Output
+ */
+
+static int mcx_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		pr_err("cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+	gpio_set_value(HDMI_TRCVR_PDn, 1);
+	return 0;
+}
+
+static void mcx_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+	gpio_set_value(HDMI_TRCVR_PDn, 0);
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+	.platform_enable	= mcx_panel_enable_dvi,
+	.platform_disable	= mcx_panel_disable_dvi,
+};
+static struct omap_dss_device mcx_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "dvi",
+	.data			= &dvi_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+static struct omap_dss_device *mcx_dss_devices[] = {
+	&mcx_lcd_device,
+	&mcx_tv_device,
+	&mcx_dvi_device,
+};
+
+static struct omap_dss_board_info mcx_dss_data = {
+	.num_devices	= ARRAY_SIZE(mcx_dss_devices),
+	.devices	= mcx_dss_devices,
+	.default_device	= &mcx_lcd_device,
+};
+
+/*
+ * use fake regulator for vdds_dsi as we can't find this pin inside
+ * AM3517 datasheet.
+ */
+static struct regulator_consumer_supply mcx_vdds_dsi_supply[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+};
+
+static struct regulator_init_data mcx_vdds_dsi = {
+	.constraints		= {
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.always_on		= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mcx_vdds_dsi_supply),
+	.consumer_supplies	= mcx_vdds_dsi_supply,
+};
+
+static struct fixed_voltage_config mcx_display = {
+	.supply_name		= "display",
+	.microvolts		= 1800000,
+	.gpio			= -EINVAL,
+	.enabled_at_boot	= 1,
+	.init_data		= &mcx_vdds_dsi,
+};
+
+static struct platform_device mcx_display_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mcx_display,
+	},
+};
+
+static struct gpio mcx_dss_gpios[] __initdata = {
+	{ LCD_BKLIGHT_EN, GPIOF_OUT_INIT_LOW, "lcd backlight enable"	},
+	{ LCD_LVL_SFHT_BUF_ENn, GPIOF_OUT_INIT_LOW, "lcd lvl shifter"	},
+	{ LCD_PWR_ENn, GPIOF_OUT_INIT_LOW, "lcd power enable"		},
+	{ HDMI_TRCVR_PDn, GPIOF_OUT_INIT_LOW, "HDMI trcvr power"	},
+};
+
+static void __init mcx_display_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(LCD_BKLIGHT_EN, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(LCD_LVL_SFHT_BUF_ENn, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(LCD_PWR_ENn, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_TRCVR_PDn, OMAP_PIN_OUTPUT);
+
+	r = gpio_request_array(mcx_dss_gpios, ARRAY_SIZE(mcx_dss_gpios));
+	if (r) {
+		pr_err("failed to get DSS control GPIOs\n");
+		return;
+	}
+
+	r = omap_display_init(&mcx_dss_data);
+	if (r) {
+		pr_err("Failed to register DSS device\n");
+		gpio_free_array(mcx_dss_gpios, ARRAY_SIZE(mcx_dss_gpios));
+	}
+}
+
+/* TPS65023 specific initialization */
+/* VDCDC1 -> VDD_CORE */
+static struct regulator_consumer_supply am3517_vdcdc1_supplies[] = {
+	{
+		.supply = "vdd_core",
+	},
+};
+
+/* VDCDC2 -> VDDSHV */
+static struct regulator_consumer_supply am3517_vdcdc2_supplies[] = {
+	{
+		.supply = "vddshv",
+	},
+};
+
+/*
+ * VDCDC2 |-> VDDS
+ *	  |-> VDDS_SRAM_CORE_BG
+ *	  |-> VDDS_SRAM_MPU
+ */
+static struct regulator_consumer_supply am3517_vdcdc3_supplies[] = {
+	{
+		.supply = "vdds",
+	},
+	{
+		.supply = "vdds_sram_core_bg",
+	},
+	{
+		.supply = "vdds_sram_mpu",
+	},
+};
+
+/*
+ * LDO1 |-> VDDA1P8V_USBPHY
+ *	|-> VDDA_DAC
+ */
+static struct regulator_consumer_supply am3517_ldo1_supplies[] = {
+	{
+		.supply = "vdda1p8v_usbphy",
+	},
+	{
+		.supply = "vdda_dac",
+	},
+};
+
+/* LDO2 -> VDDA3P3V_USBPHY */
+static struct regulator_consumer_supply am3517_ldo2_supplies[] = {
+	{
+		.supply = "vdda3p3v_usbphy",
+	},
+};
+
+static struct regulator_init_data mcx_regulator_data[] = {
+	/* DCDC1 */
+	{
+		.constraints = {
+			.min_uV = 1200000,
+			.max_uV = 1200000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc1_supplies),
+		.consumer_supplies = am3517_vdcdc1_supplies,
+	},
+	/* DCDC2 */
+	{
+		.constraints = {
+			.min_uV = 3300000,
+			.max_uV = 3300000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc2_supplies),
+		.consumer_supplies = am3517_vdcdc2_supplies,
+	},
+	/* DCDC3 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc3_supplies),
+		.consumer_supplies = am3517_vdcdc3_supplies,
+	},
+	/* LDO1 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = false,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_ldo1_supplies),
+		.consumer_supplies = am3517_ldo1_supplies,
+	},
+	/* LDO2 */
+	{
+		.constraints = {
+			.min_uV = 3300000,
+			.max_uV = 3300000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = false,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_ldo2_supplies),
+		.consumer_supplies = am3517_ldo2_supplies,
+	},
+};
+
+static struct i2c_board_info __initdata mcx_i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+	{
+		I2C_BOARD_INFO("tps65023", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.platform_data = &mcx_regulator_data[0],
+	},
+};
+
+#define TOUCH_INT_GPIO	170
+
+static int __init mcx_ts_init(void)
+{
+	struct i2c_board_info mcx_edt_ts[] = {
+		{
+			I2C_BOARD_INFO("edt_ts", 0x38),
+			.irq = gpio_to_irq(TOUCH_INT_GPIO),
+		},
+	};
+	int err;
+
+	omap_mux_init_gpio(TOUCH_INT_GPIO, OMAP_PIN_INPUT);
+	err = gpio_request_one(TOUCH_INT_GPIO, GPIOF_IN, "TOUCH_INT");
+	if (err < 0) {
+		pr_err("failed to get TOUCH_INT gpio\n");
+		return -ENODEV;
+	}
+
+	return i2c_register_board_info(3, mcx_edt_ts, 1);
+}
+
+static void __init mcx_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, mcx_i2c1_devices,
+			ARRAY_SIZE(mcx_i2c1_devices));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+}
+
+#define USB_HOST_PWR_EN		132
+#define USB_PHY1_RESET		154
+#define USB_PHY2_RESET		152
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = USB_PHY1_RESET,
+	.reset_gpio_port[1]  = USB_PHY2_RESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#define SD_CARD_CD		61
+#define SD_CARD_WP		65
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd        = SD_CARD_CD,
+		.gpio_wp        = SD_CARD_WP,
+	},
+	{}      /* Terminator */
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(CHASSIS_DMAREQ3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static struct platform_device *mcx_devices[] __initdata = {
+	&mcx_display_device,
+};
+
+static void __init mcx_init(void)
+{
+	int err;
+
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	mcx_i2c_init();
+	platform_add_devices(mcx_devices, ARRAY_SIZE(mcx_devices));
+	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
+
+	mcx_display_init();
+
+	/* Configure EHCI ports */
+	omap_mux_init_gpio(USB_HOST_PWR_EN, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(USB_PHY1_RESET, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(USB_PHY2_RESET, OMAP_PIN_OUTPUT);
+	err = gpio_request_one(USB_HOST_PWR_EN, GPIOF_OUT_INIT_HIGH,
+			"USB_HOST_PWR_EN");
+	if (err)
+		pr_warn("Failed to request USB host power enable GPIO\n");
+
+	usbhs_init(&usbhs_bdata);
+
+	/* NAND */
+	omap_nand_flash_init(NAND_BUSWIDTH_16, mcx_nand_partitions,
+			     ARRAY_SIZE(mcx_nand_partitions));
+	/* Ethernet */
+	am35xx_ethernet_init(MCX_MDIO_FREQUENCY, 1);
+
+	/* MMC init */
+	omap_mux_init_gpio(SD_CARD_WP, OMAP_PIN_INPUT);
+	omap_mux_init_gpio(SD_CARD_CD, OMAP_PIN_INPUT);
+	omap2_hsmmc_init(mmc);
+
+	/* touchscreen init */
+	err = mcx_ts_init();
+	if (err < 0)
+		pr_err("failed to register touchscreen device\n");
+}
+
+static const char *mcx_dt_match[] __initdata = {
+	"htkw,mcx",
+	NULL
+};
+
+MACHINE_START(MCX, "htkw mcx")
+	/* Maintainer: Ilya Yanok */
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= mcx_init,
+	.timer		= &omap3_timer,
+	.dt_compat	= mcx_dt_match,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 27d9d31..1141364 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP3(3, encore);
 		DEBUG_LL_OMAP3(3, igep0020);
 		DEBUG_LL_OMAP3(3, igep0030);
+		DEBUG_LL_OMAP3(3, mcx);
 		DEBUG_LL_OMAP3(3, nokia_rm680);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
-- 
1.7.6.4

Re: [PATCH V3 2/2] mcx: support for HTKW mcx board

[Tony Lindgren]

* Ilya Yanok <yanok@emcraft.com> [111221 07:21]:
> Support for the HTKW mcx board (TI AM3517 based) including serial,
> Ethernet, I2C, USB host, HSMMC, DSS and RTC.

This one I can carry in testing-board until device tree works
for us in a usable way. But probably some rebasing is needed
for this after the hsmmc stuff is cleared out of the way.

Regards,

Tony

[PATCH V3 2/2] mcx: support for HTKW mcx board

[Tony Lindgren]

* Ilya Yanok <yanok@emcraft.com> [111221 07:21]:
> Support for the HTKW mcx board (TI AM3517 based) including serial,
> Ethernet, I2C, USB host, HSMMC, DSS and RTC.

This one I can carry in testing-board until device tree works
for us in a usable way. But probably some rebasing is needed
for this after the hsmmc stuff is cleared out of the way.

Regards,

Tony

[PATCH V3 0/2] Support for HTKW mcx

[Ilya Yanok]

plit into two parts:
 1. Device tree only to be used with board-generic (only serial works)
 2. Full board support via custom machine file for board-testing

Ilya Yanok (2):
  mcx: very basic support for HTKW mcx board
  mcx: support for HTKW mcx board

 arch/arm/boot/dts/mcx.dts                    |   27 ++
 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-mcx.c              |  500 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 5 files changed, 535 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/mcx.dts
 create mode 100644 arch/arm/mach-omap2/board-mcx.c

-- 
1.7.6.4

[PATCH V3 2/2] mcx: support for HTKW mcx board

[Ilya Yanok]

Support for the HTKW mcx board (TI AM3517 based) including serial,
Ethernet, I2C, USB host, HSMMC, DSS and RTC.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>

---
Requires updated machine-type file, recently posted AM35xx-EMAC patch
and "Disable PM init on AM35{05,17} patch.

Changes from V2:
 - Rebased onto the current linux-omap/master
  - Added "common.h" include
  - Added .handle_irq field to machine description
  - Added omap_sdrc_init() call
 - Removed unneeded pullup from output pins
 - Moved pin muxing before GPIO accesses
 - Removed .ocr_mask field (it's overwritten anyway)
 - Moved touchscreen init out of I2C init
 - some readability improvements (empty lines, comments)

Changes from V1:
 - Kconfig option name fixed
 - Makefile entry sanitized
 - Unneeded headers removed
 - EMAC initialization moved to separate file/patch
 - Use gpio_{request,free}_{array,one} where possible
 - don't use platform data for touchscreen, we only need to pass
   irq number, do it via client.irq
 - check mcx_ts_init return value
 - Moved DEBUG_LL_OMAP3 entry to be in aplhabetical order
 - check return value of gpio_request for USB pwr pin
 - use pr_err instead of printk for error printing
 - added a fixed regulator for vdds_dsi
 - added SDcard card-detect pin

 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    1 +
 arch/arm/mach-omap2/board-mcx.c              |  500 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 4 files changed, 508 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-mcx.c

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0eb27b2..fd9b8c0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -231,6 +231,12 @@ config MACH_OMAP_3430SDP
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_MCX
+	bool "HTKW mcx (AM3517 based) board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CBB
+	select REGULATOR_FIXED_VOLTAGE
+
 config MACH_NOKIA_N800
        bool
 
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 5d75cb5..9405dfc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -238,6 +238,7 @@ obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o
 obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
 obj-$(CONFIG_MACH_TI8148EVM)		+= board-ti8168evm.o
+obj-$(CONFIG_MACH_MCX)			+= board-mcx.o
 
 # Platform specific device init code
 
diff --git a/arch/arm/mach-omap2/board-mcx.c b/arch/arm/mach-omap2/board-mcx.c
new file mode 100644
index 0000000..70c4339
--- /dev/null
+++ b/arch/arm/mach-omap2/board-mcx.c
@@ -0,0 +1,500 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+#include <plat/usb.h>
+
+#include "am35xx-emac.h"
+#include "mux.h"
+#include "control.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+#include "common.h"
+
+#define MCX_MDIO_FREQUENCY	(1000000)
+
+static struct mtd_partition mcx_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+#define LCD_PWR_ENn		131
+#define HDMI_TRCVR_PDn		133
+#define LCD_BKLIGHT_EN		55
+#define LCD_LVL_SFHT_BUF_ENn	43
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int mcx_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		pr_err("cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_set_value(LCD_BKLIGHT_EN, 1);
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void mcx_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(LCD_BKLIGHT_EN, 0);
+	lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd_panel = {
+	.name			= "focaltech_etm070003dh6",
+	.platform_enable	= mcx_panel_enable_lcd,
+	.platform_disable	= mcx_panel_disable_lcd,
+};
+
+static struct omap_dss_device mcx_lcd_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "lcd",
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+/*
+ * TV Output
+ */
+
+static int mcx_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void mcx_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device mcx_tv_device = {
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.name			= "tv",
+	.driver_name		= "venc",
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= mcx_panel_enable_tv,
+	.platform_disable	= mcx_panel_disable_tv,
+};
+
+/*
+ * DVI/HDMI Output
+ */
+
+static int mcx_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		pr_err("cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+	dvi_enabled = 1;
+	gpio_set_value(HDMI_TRCVR_PDn, 1);
+	return 0;
+}
+
+static void mcx_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+	gpio_set_value(HDMI_TRCVR_PDn, 0);
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+	.platform_enable	= mcx_panel_enable_dvi,
+	.platform_disable	= mcx_panel_disable_dvi,
+};
+static struct omap_dss_device mcx_dvi_device = {
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.name			= "dvi",
+	.driver_name		= "dvi",
+	.data			= &dvi_panel,
+	.phy.dpi.data_lines	= 24,
+};
+
+static struct omap_dss_device *mcx_dss_devices[] = {
+	&mcx_lcd_device,
+	&mcx_tv_device,
+	&mcx_dvi_device,
+};
+
+static struct omap_dss_board_info mcx_dss_data = {
+	.num_devices	= ARRAY_SIZE(mcx_dss_devices),
+	.devices	= mcx_dss_devices,
+	.default_device	= &mcx_lcd_device,
+};
+
+/*
+ * use fake regulator for vdds_dsi as we can't find this pin inside
+ * AM3517 datasheet.
+ */
+static struct regulator_consumer_supply mcx_vdds_dsi_supply[] = {
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
+};
+
+static struct regulator_init_data mcx_vdds_dsi = {
+	.constraints		= {
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.always_on		= 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mcx_vdds_dsi_supply),
+	.consumer_supplies	= mcx_vdds_dsi_supply,
+};
+
+static struct fixed_voltage_config mcx_display = {
+	.supply_name		= "display",
+	.microvolts		= 1800000,
+	.gpio			= -EINVAL,
+	.enabled_at_boot	= 1,
+	.init_data		= &mcx_vdds_dsi,
+};
+
+static struct platform_device mcx_display_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &mcx_display,
+	},
+};
+
+static struct gpio mcx_dss_gpios[] __initdata = {
+	{ LCD_BKLIGHT_EN, GPIOF_OUT_INIT_LOW, "lcd backlight enable"	},
+	{ LCD_LVL_SFHT_BUF_ENn, GPIOF_OUT_INIT_LOW, "lcd lvl shifter"	},
+	{ LCD_PWR_ENn, GPIOF_OUT_INIT_LOW, "lcd power enable"		},
+	{ HDMI_TRCVR_PDn, GPIOF_OUT_INIT_LOW, "HDMI trcvr power"	},
+};
+
+static void __init mcx_display_init(void)
+{
+	int r;
+
+	omap_mux_init_gpio(LCD_BKLIGHT_EN, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(LCD_LVL_SFHT_BUF_ENn, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(LCD_PWR_ENn, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_TRCVR_PDn, OMAP_PIN_OUTPUT);
+
+	r = gpio_request_array(mcx_dss_gpios, ARRAY_SIZE(mcx_dss_gpios));
+	if (r) {
+		pr_err("failed to get DSS control GPIOs\n");
+		return;
+	}
+
+	r = omap_display_init(&mcx_dss_data);
+	if (r) {
+		pr_err("Failed to register DSS device\n");
+		gpio_free_array(mcx_dss_gpios, ARRAY_SIZE(mcx_dss_gpios));
+	}
+}
+
+/* TPS65023 specific initialization */
+/* VDCDC1 -> VDD_CORE */
+static struct regulator_consumer_supply am3517_vdcdc1_supplies[] = {
+	{
+		.supply = "vdd_core",
+	},
+};
+
+/* VDCDC2 -> VDDSHV */
+static struct regulator_consumer_supply am3517_vdcdc2_supplies[] = {
+	{
+		.supply = "vddshv",
+	},
+};
+
+/*
+ * VDCDC2 |-> VDDS
+ *	  |-> VDDS_SRAM_CORE_BG
+ *	  |-> VDDS_SRAM_MPU
+ */
+static struct regulator_consumer_supply am3517_vdcdc3_supplies[] = {
+	{
+		.supply = "vdds",
+	},
+	{
+		.supply = "vdds_sram_core_bg",
+	},
+	{
+		.supply = "vdds_sram_mpu",
+	},
+};
+
+/*
+ * LDO1 |-> VDDA1P8V_USBPHY
+ *	|-> VDDA_DAC
+ */
+static struct regulator_consumer_supply am3517_ldo1_supplies[] = {
+	{
+		.supply = "vdda1p8v_usbphy",
+	},
+	{
+		.supply = "vdda_dac",
+	},
+};
+
+/* LDO2 -> VDDA3P3V_USBPHY */
+static struct regulator_consumer_supply am3517_ldo2_supplies[] = {
+	{
+		.supply = "vdda3p3v_usbphy",
+	},
+};
+
+static struct regulator_init_data mcx_regulator_data[] = {
+	/* DCDC1 */
+	{
+		.constraints = {
+			.min_uV = 1200000,
+			.max_uV = 1200000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc1_supplies),
+		.consumer_supplies = am3517_vdcdc1_supplies,
+	},
+	/* DCDC2 */
+	{
+		.constraints = {
+			.min_uV = 3300000,
+			.max_uV = 3300000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc2_supplies),
+		.consumer_supplies = am3517_vdcdc2_supplies,
+	},
+	/* DCDC3 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = true,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc3_supplies),
+		.consumer_supplies = am3517_vdcdc3_supplies,
+	},
+	/* LDO1 */
+	{
+		.constraints = {
+			.min_uV = 1800000,
+			.max_uV = 1800000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = false,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_ldo1_supplies),
+		.consumer_supplies = am3517_ldo1_supplies,
+	},
+	/* LDO2 */
+	{
+		.constraints = {
+			.min_uV = 3300000,
+			.max_uV = 3300000,
+			.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+			.always_on = false,
+			.apply_uV = false,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(am3517_ldo2_supplies),
+		.consumer_supplies = am3517_ldo2_supplies,
+	},
+};
+
+static struct i2c_board_info __initdata mcx_i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+	{
+		I2C_BOARD_INFO("tps65023", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.platform_data = &mcx_regulator_data[0],
+	},
+};
+
+#define TOUCH_INT_GPIO	170
+
+static int __init mcx_ts_init(void)
+{
+	struct i2c_board_info mcx_edt_ts[] = {
+		{
+			I2C_BOARD_INFO("edt_ts", 0x38),
+			.irq = gpio_to_irq(TOUCH_INT_GPIO),
+		},
+	};
+	int err;
+
+	omap_mux_init_gpio(TOUCH_INT_GPIO, OMAP_PIN_INPUT);
+	err = gpio_request_one(TOUCH_INT_GPIO, GPIOF_IN, "TOUCH_INT");
+	if (err < 0) {
+		pr_err("failed to get TOUCH_INT gpio\n");
+		return -ENODEV;
+	}
+
+	return i2c_register_board_info(3, mcx_edt_ts, 1);
+}
+
+static void __init mcx_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 400, mcx_i2c1_devices,
+			ARRAY_SIZE(mcx_i2c1_devices));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+}
+
+#define USB_HOST_PWR_EN		132
+#define USB_PHY1_RESET		154
+#define USB_PHY2_RESET		152
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+
+	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = USB_PHY1_RESET,
+	.reset_gpio_port[1]  = USB_PHY2_RESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#define SD_CARD_CD		61
+#define SD_CARD_WP		65
+
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd        = SD_CARD_CD,
+		.gpio_wp        = SD_CARD_WP,
+	},
+	{}      /* Terminator */
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	OMAP3_MUX(CHASSIS_DMAREQ3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static struct platform_device *mcx_devices[] __initdata = {
+	&mcx_display_device,
+};
+
+static void __init mcx_init(void)
+{
+	int err;
+
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	mcx_i2c_init();
+	platform_add_devices(mcx_devices, ARRAY_SIZE(mcx_devices));
+	omap_serial_init();
+	omap_sdrc_init(NULL, NULL);
+
+	mcx_display_init();
+
+	/* Configure EHCI ports */
+	omap_mux_init_gpio(USB_HOST_PWR_EN, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(USB_PHY1_RESET, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(USB_PHY2_RESET, OMAP_PIN_OUTPUT);
+	err = gpio_request_one(USB_HOST_PWR_EN, GPIOF_OUT_INIT_HIGH,
+			"USB_HOST_PWR_EN");
+	if (err)
+		pr_warn("Failed to request USB host power enable GPIO\n");
+
+	usbhs_init(&usbhs_bdata);
+
+	/* NAND */
+	omap_nand_flash_init(NAND_BUSWIDTH_16, mcx_nand_partitions,
+			     ARRAY_SIZE(mcx_nand_partitions));
+	/* Ethernet */
+	am35xx_ethernet_init(MCX_MDIO_FREQUENCY, 1);
+
+	/* MMC init */
+	omap_mux_init_gpio(SD_CARD_WP, OMAP_PIN_INPUT);
+	omap_mux_init_gpio(SD_CARD_CD, OMAP_PIN_INPUT);
+	omap2_hsmmc_init(mmc);
+
+	/* touchscreen init */
+	err = mcx_ts_init();
+	if (err < 0)
+		pr_err("failed to register touchscreen device\n");
+}
+
+static const char *mcx_dt_match[] __initdata = {
+	"htkw,mcx",
+	NULL
+};
+
+MACHINE_START(MCX, "htkw mcx")
+	/* Maintainer: Ilya Yanok */
+	.atag_offset	= 0x100,
+	.reserve	= omap_reserve,
+	.map_io		= omap3_map_io,
+	.init_early	= am35xx_init_early,
+	.init_irq	= omap3_init_irq,
+	.handle_irq	= omap3_intc_handle_irq,
+	.init_machine	= mcx_init,
+	.timer		= &omap3_timer,
+	.dt_compat	= mcx_dt_match,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 27d9d31..1141364 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP3(3, encore);
 		DEBUG_LL_OMAP3(3, igep0020);
 		DEBUG_LL_OMAP3(3, igep0030);
+		DEBUG_LL_OMAP3(3, mcx);
 		DEBUG_LL_OMAP3(3, nokia_rm680);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
-- 
1.7.6.4