From: "Heiko Stübner" <heiko@sntech.de>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: ben-linux@fluff.org, linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: S3C24XX: Move device setup files to mach directory
Date: Tue, 6 Mar 2012 11:00:32 +0100 [thread overview]
Message-ID: <201203061100.32931.heiko@sntech.de> (raw)
In-Reply-To: <201203061057.15815.heiko@sntech.de>
Includes a small rename of the SETUP_TS option to a S3C24XX prefix.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 7 ++++++-
arch/arm/mach-s3c24xx/Makefile | 2 ++
.../arm/{plat-s3c24xx => mach-s3c24xx}/setup-i2c.c | 0
arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-ts.c | 0
arch/arm/plat-s3c24xx/Kconfig | 5 -----
arch/arm/plat-s3c24xx/Makefile | 4 ----
6 files changed, 8 insertions(+), 10 deletions(-)
rename arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-i2c.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-ts.c (100%)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index df6f419..b399021 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -106,6 +106,11 @@ config S3C24XX_SIMTEC_USB
help
USB management code for common Simtec S3C24XX boards
+config S3C24XX_SETUP_TS
+ bool
+ help
+ Compile in platform device definition for Samsung TouchScreen.
+
# cpu-specific sections
if CPU_S3C2410
@@ -178,7 +183,7 @@ config ARCH_H1940
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
- select S3C2410_SETUP_TS
+ select S3C24XX_SETUP_TS
help
Say Y here if you are using the HP IPAQ H1940
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 2843c81..3f39e6f 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -91,3 +91,5 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
+obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/setup-i2c.c
rename to arch/arm/mach-s3c24xx/setup-i2c.c
diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/setup-ts.c
rename to arch/arm/mach-s3c24xx/setup-ts.c
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 0338d20..21bf6ad 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -113,9 +113,4 @@ config S3C2412_IOTIMING
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
-config S3C2410_SETUP_TS
- bool
- help
- Compile in platform device definition for Samsung TouchScreen.
-
endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 27dd9c5..2467b80 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -31,7 +31,3 @@ obj-$(CONFIG_S3C24XX_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
-
-# device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
-obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
--
1.7.5.4
WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: S3C24XX: Move device setup files to mach directory
Date: Tue, 6 Mar 2012 11:00:32 +0100 [thread overview]
Message-ID: <201203061100.32931.heiko@sntech.de> (raw)
In-Reply-To: <201203061057.15815.heiko@sntech.de>
Includes a small rename of the SETUP_TS option to a S3C24XX prefix.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 7 ++++++-
arch/arm/mach-s3c24xx/Makefile | 2 ++
.../arm/{plat-s3c24xx => mach-s3c24xx}/setup-i2c.c | 0
arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-ts.c | 0
arch/arm/plat-s3c24xx/Kconfig | 5 -----
arch/arm/plat-s3c24xx/Makefile | 4 ----
6 files changed, 8 insertions(+), 10 deletions(-)
rename arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-i2c.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-ts.c (100%)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index df6f419..b399021 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -106,6 +106,11 @@ config S3C24XX_SIMTEC_USB
help
USB management code for common Simtec S3C24XX boards
+config S3C24XX_SETUP_TS
+ bool
+ help
+ Compile in platform device definition for Samsung TouchScreen.
+
# cpu-specific sections
if CPU_S3C2410
@@ -178,7 +183,7 @@ config ARCH_H1940
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
- select S3C2410_SETUP_TS
+ select S3C24XX_SETUP_TS
help
Say Y here if you are using the HP IPAQ H1940
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 2843c81..3f39e6f 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -91,3 +91,5 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
+obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/setup-i2c.c
rename to arch/arm/mach-s3c24xx/setup-i2c.c
diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/setup-ts.c
rename to arch/arm/mach-s3c24xx/setup-ts.c
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 0338d20..21bf6ad 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -113,9 +113,4 @@ config S3C2412_IOTIMING
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
-config S3C2410_SETUP_TS
- bool
- help
- Compile in platform device definition for Samsung TouchScreen.
-
endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 27dd9c5..2467b80 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -31,7 +31,3 @@ obj-$(CONFIG_S3C24XX_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
-
-# device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
-obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
--
1.7.5.4
next prev parent reply other threads:[~2012-03-06 10:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-06 9:57 [PATCH 0/4] S3C24XX: Another move of code to the new mach directory Heiko Stübner
2012-03-06 9:57 ` Heiko Stübner
2012-03-06 9:58 ` [PATCH 1/4] ARM: S3C24XX: Move common-smdk code to " Heiko Stübner
2012-03-06 9:58 ` Heiko Stübner
2012-03-06 9:59 ` [PATCH 2/4] ARM: S3C24XX: move simtec-specific " Heiko Stübner
2012-03-06 9:59 ` Heiko Stübner
2012-03-06 9:59 ` [PATCH 3/4] ARM: S3C24XX: Consolidate Simtec extensions Heiko Stübner
2012-03-06 9:59 ` Heiko Stübner
2012-03-06 10:00 ` Heiko Stübner [this message]
2012-03-06 10:00 ` [PATCH 4/4] ARM: S3C24XX: Move device setup files to mach directory Heiko Stübner
2012-03-07 11:18 ` [PATCH 0/4] S3C24XX: Another move of code to the new " Kukjin Kim
2012-03-07 11:18 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203061100.32931.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.