Disable GNU Hash check ?

Disable GNU Hash check ?

[Hauser, Wolfgang (external)]

Hello,

I have to create a package containing static and dynamic libraries and
some files.
The libraries are delivered by a vendor and we have to use(install) them
as they are.

While bitbaking the QA procedure complains about missing GNU Hashes. 

Is there a possibility to disable this check for a single recipe ?

I am using bitbake 1.10.2 and an OE mainenance-2011.03 based tree.

Regards
Wolfgang

Re: Disable GNU Hash check ?

[Denys Dmytriyenko]

On Mon, Mar 05, 2012 at 06:53:05PM +0100, Hauser, Wolfgang (external) wrote:
> Hello,
> 
> I have to create a package containing static and dynamic libraries and
> some files.
> The libraries are delivered by a vendor and we have to use(install) them
> as they are.
> 
> While bitbaking the QA procedure complains about missing GNU Hashes. 
> 
> Is there a possibility to disable this check for a single recipe ?
> 
> I am using bitbake 1.10.2 and an OE mainenance-2011.03 based tree.

INSANE_SKIP_${PN} = "True"

-- 
Denys

Re: Disable GNU Hash check ?

[Luca Bolognini]

And what if I want to disable this check only for a specific executable/library inside a package (not a complete package)?

-------------------------Luca Bologninil.bolognini@hotmail.it


> Date: Mon, 5 Mar 2012 17:54:22 -0500
> From: denis@denix.org
> To: openembedded-devel@lists.openembedded.org
> Subject: Re: [oe] Disable GNU Hash check ?
> 
> On Mon, Mar 05, 2012 at 06:53:05PM +0100, Hauser, Wolfgang (external) wrote:
> > Hello,
> > 
> > I have to create a package containing static and dynamic libraries and
> > some files.
> > The libraries are delivered by a vendor and we have to use(install) them
> > as they are.
> > 
> > While bitbaking the QA procedure complains about missing GNU Hashes. 
> > 
> > Is there a possibility to disable this check for a single recipe ?
> > 
> > I am using bitbake 1.10.2 and an OE mainenance-2011.03 based tree.
> 
> INSANE_SKIP_${PN} = "True"
> 
> -- 
> Denys
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
 		 	   		  

Re: Disable GNU Hash check ?

[Denys Dmytriyenko]

On Tue, Mar 06, 2012 at 09:49:55AM +0100, Luca Bolognini wrote:
> 
> 
> And what if I want to disable this check only for a specific 
> executable/library inside a package (not a complete package)?

Cannot do it on a per-file basis, only on a per-package. Split your package 
into sub-packages and then do INSANE_SKIP_${PN}-pkg = "True".

-- 
Denys


> -------------------------Luca Bologninil.bolognini@hotmail.it
> 
> 
> > Date: Mon, 5 Mar 2012 17:54:22 -0500
> > From: denis@denix.org
> > To: openembedded-devel@lists.openembedded.org
> > Subject: Re: [oe] Disable GNU Hash check ?
> > 
> > On Mon, Mar 05, 2012 at 06:53:05PM +0100, Hauser, Wolfgang (external) wrote:
> > > Hello,
> > > 
> > > I have to create a package containing static and dynamic libraries and
> > > some files.
> > > The libraries are delivered by a vendor and we have to use(install) them
> > > as they are.
> > > 
> > > While bitbaking the QA procedure complains about missing GNU Hashes. 
> > > 
> > > Is there a possibility to disable this check for a single recipe ?
> > > 
> > > I am using bitbake 1.10.2 and an OE mainenance-2011.03 based tree.
> > 
> > INSANE_SKIP_${PN} = "True"
> > 
> > -- 
> > Denys
> > 
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel@lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>  		 	   		  
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Disable GNU Hash check ?

[Hauser, Wolfgang (external)]

>> INSANE_SKIP_${PN} = "True"

>> -- 
>> Denys

Thanks for that hint, but it is 

INSANE_SKIP_${PN} = True
INSANE_SKIP_${PN}-dev = True
INSANE_SKIP_${PN}-dbg = True

That solves the problem.

Regards
Wolfgang

Re: Disable GNU Hash check ?

[Denys Dmytriyenko]

On Tue, Mar 06, 2012 at 11:08:18AM +0100, Hauser, Wolfgang (external) wrote:
> 
> >> INSANE_SKIP_${PN} = "True"
> 
> >> -- 
> >> Denys
> 
> Thanks for that hint, but it is 
> 
> INSANE_SKIP_${PN} = True
> INSANE_SKIP_${PN}-dev = True
> INSANE_SKIP_${PN}-dbg = True
> 
> That solves the problem.

"Adjust accordingly" always applies. :)

-- 
Denys

Re: Disable GNU Hash check ?

[Ulf Samuelsson]

On 2012-03-06 11:08, Hauser, Wolfgang (external) wrote:
> Thanks for that hint, but it is
>
> INSANE_SKIP_${PN} = True
> INSANE_SKIP_${PN}-dev = True
> INSANE_SKIP_${PN}-dbg = True
>
> That solves the problem.
>
> Regards
> Wolfgang
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Had this problem with a source package containing both a kernel driver 
and applications.
The GNU Hash problem occured on the applications but not on the kernel 
modules.

The way it works, is that you create a configuration file, and then call 
make without parameters
so you build both the kernel and the apps in one step.

Added         TARGET_CC_ARCH+="${LDFLAGS}", as recommended in some 
mails, without effect.

Adding

INSANE_SKIP_${PN} = True
INSANE_SKIP_${PN}-dev = True
INSANE_SKIP_${PN}-dbg = True

makes the symptom go away.

The core of the recipe is:
----------------------------------------------
inherit module

EXTRA_OEMAKE = ' \
         KLIB=${STAGING_KERNEL_DIR} \
         KLIB_BUILD=${STAGING_KERNEL_DIR} \
         KERNEL_VERSION=${KERNEL_VERSION} \
         TARGET_CC_ARCH+="${LDFLAGS}" \
         '

do_compile () {
         unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS CC LD CPP
         oe_runmake
}
-----------------------------------------------

While the kernel modules seems to build OK,
I have a feeling that it is not right to build the applications this way
and this is why I get the error messages.

I'd rather fix the root cause than do the workaround,
but splitting up the build into two steps is really not supported by the 
package.

Would appreciate some comments.


-- 
Best Regards
Ulf Samuelsson
ulf@emagii.com
+46 722 427437

Re: Disable GNU Hash check ?

[Khem Raj]

On Tue, May 8, 2012 at 2:08 PM, Ulf Samuelsson <openembedded@emagii.com> wrote:
>
> I'd rather fix the root cause than do the workaround,
> but splitting up the build into two steps is really not supported by the
> package.
>
> Would appreciate some comments.

in OE-Core the default hash style is now gnu hash for toolchain on all
except mips
since mips can not support gnu hash. you should not need to add
commandline parameters to indicate it.

Re: Disable GNU Hash check ?

[Ulf Samuelsson]

Still using OE 2011.03 for this
Would like to migrate this to OE-core, but it is not my call..
.

Best Regards
Ulf Samuelsson
ulf@emagii.com
+46  (722) 427 437


9 maj 2012 kl. 02:46 skrev Khem Raj <raj.khem@gmail.com>:

> On Tue, May 8, 2012 at 2:08 PM, Ulf Samuelsson <openembedded@emagii.com> wrote:
>> 
>> I'd rather fix the root cause than do the workaround,
>> but splitting up the build into two steps is really not supported by the
>> package.
>> 
>> Would appreciate some comments.
> 
> in OE-Core the default hash style is now gnu hash for toolchain on all
> except mips
> since mips can not support gnu hash. you should not need to add
> commandline parameters to indicate it.
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Re: Disable GNU Hash check ?

[Ulf Samuelsson]

BTW, the rest of the packages compile w/o this problem,
so it shoul be related to first building the kernel modules.

Best Regards
Ulf Samuelsson
ulf@emagii.com
+46  (722) 427 437


9 maj 2012 kl. 02:46 skrev Khem Raj <raj.khem@gmail.com>:

> On Tue, May 8, 2012 at 2:08 PM, Ulf Samuelsson <openembedded@emagii.com> wrote:
>> 
>> I'd rather fix the root cause than do the workaround,
>> but splitting up the build into two steps is really not supported by the
>> package.
>> 
>> Would appreciate some comments.
> 
> in OE-Core the default hash style is now gnu hash for toolchain on all
> except mips
> since mips can not support gnu hash. you should not need to add
> commandline parameters to indicate it.
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel