zImage and raw ramdisk support -- test

zImage and raw ramdisk support -- test

[Marek Vasut]

Guys,

I need final test on as much platforms as possible. Can you please run these two 
following patches and tell me if they work with zImage and raw ramdisk for you?

http://patchwork.ozlabs.org/patch/146848/
http://patchwork.ozlabs.org/patch/147440/

I can't promise they will make it to this release (I've been pestering WD pretty 
thoroughly (sorry about that), though I'm starting to be unhappy to merge this 
stuff at the verge of release myself).

Best regards,
Marek Vasut

[U-Boot] zImage and raw ramdisk support -- test

[Marek Vasut]

Guys,

I need final test on as much platforms as possible. Can you please run these two 
following patches and tell me if they work with zImage and raw ramdisk for you?

http://patchwork.ozlabs.org/patch/146848/
http://patchwork.ozlabs.org/patch/147440/

I can't promise they will make it to this release (I've been pestering WD pretty 
thoroughly (sorry about that), though I'm starting to be unhappy to merge this 
stuff at the verge of release myself).

Best regards,
Marek Vasut

[U-Boot] zImage and raw ramdisk support -- test

[Robert Nelson]

On Fri, Mar 30, 2012 at 10:38 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Guys,
>
> I need final test on as much platforms as possible. Can you please run these two
> following patches and tell me if they work with zImage and raw ramdisk for you?
>
> http://patchwork.ozlabs.org/patch/146848/
> http://patchwork.ozlabs.org/patch/147440/
>
> I can't promise they will make it to this release (I've been pestering WD pretty
> thoroughly (sorry about that), though I'm starting to be unhappy to merge this
> stuff at the verge of release myself).

Hi Marek,

These work great on my omap3 Beagle xM C / omap4 Panda, using a zImage
and initramfs..

Just added the two appropriate board configs, to enable it..
#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD

and used todays u-boot git head:
http://git.denx.de/?p=u-boot.git;a=commit;h=7cb30b13f12077c7eec8ce2419cd96cd65ace8e2

Tested-by: Robert Nelson <robertcnelson@gmail.com>

Regards,
-- 
Robert Nelson
http://www.rcn-ee.com/

[U-Boot] zImage and raw ramdisk support -- test

[Robert Nelson]

On Fri, Mar 30, 2012 at 10:38 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> Guys,
>
> I need final test on as much platforms as possible. Can you please run these two
> following patches and tell me if they work with zImage and raw ramdisk for you?
>
> http://patchwork.ozlabs.org/patch/146848/
> http://patchwork.ozlabs.org/patch/147440/
>
> I can't promise they will make it to this release (I've been pestering WD pretty
> thoroughly (sorry about that), though I'm starting to be unhappy to merge this
> stuff at the verge of release myself).

Hi Marek,

These work great on my omap3 Beagle xM C / omap4 Panda, using a zImage
and initramfs..

Just added the two appropriate board configs, to enable it..
#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD

and used todays u-boot git head:
http://git.denx.de/?p=u-boot.git;a=commit;h=7cb30b13f12077c7eec8ce2419cd96cd65ace8e2

Tested-by: Robert Nelson <robertcnelson@gmail.com>

Regards,
-- 
Robert Nelson
http://www.rcn-ee.com/

[U-Boot] zImage and raw ramdisk support -- test

[Marek Vasut]

Dear Robert Nelson,

> On Fri, Mar 30, 2012 at 10:38 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > Guys,
> > 
> > I need final test on as much platforms as possible. Can you please run
> > these two following patches and tell me if they work with zImage and raw
> > ramdisk for you?
> > 
> > http://patchwork.ozlabs.org/patch/146848/
> > http://patchwork.ozlabs.org/patch/147440/
> > 
> > I can't promise they will make it to this release (I've been pestering WD
> > pretty thoroughly (sorry about that), though I'm starting to be unhappy
> > to merge this stuff at the verge of release myself).
> 
> Hi Marek,
> 
> These work great on my omap3 Beagle xM C / omap4 Panda, using a zImage
> and initramfs..
> 
> Just added the two appropriate board configs, to enable it..
> #define CONFIG_CMD_BOOTZ
> #define CONFIG_SUPPORT_RAW_INITRD
> 
> and used todays u-boot git head:
> http://git.denx.de/?p=u-boot.git;a=commit;h=7cb30b13f12077c7eec8ce2419cd96c
> d65ace8e2

And it makes u-boot about 20% cooler, doesn't it ;-)

Thanks a lot for your testing!

> Tested-by: Robert Nelson <robertcnelson@gmail.com>
> 
> Regards,

Best regards,
Marek Vasut

[U-Boot] zImage and raw ramdisk support -- test

[Marek Vasut]

Dear Robert Nelson,

> On Fri, Mar 30, 2012 at 10:38 AM, Marek Vasut <marek.vasut@gmail.com> wrote:
> > Guys,
> > 
> > I need final test on as much platforms as possible. Can you please run
> > these two following patches and tell me if they work with zImage and raw
> > ramdisk for you?
> > 
> > http://patchwork.ozlabs.org/patch/146848/
> > http://patchwork.ozlabs.org/patch/147440/
> > 
> > I can't promise they will make it to this release (I've been pestering WD
> > pretty thoroughly (sorry about that), though I'm starting to be unhappy
> > to merge this stuff at the verge of release myself).
> 
> Hi Marek,
> 
> These work great on my omap3 Beagle xM C / omap4 Panda, using a zImage
> and initramfs..
> 
> Just added the two appropriate board configs, to enable it..
> #define CONFIG_CMD_BOOTZ
> #define CONFIG_SUPPORT_RAW_INITRD
> 
> and used todays u-boot git head:
> http://git.denx.de/?p=u-boot.git;a=commit;h=7cb30b13f12077c7eec8ce2419cd96c
> d65ace8e2

And it makes u-boot about 20% cooler, doesn't it ;-)

Thanks a lot for your testing!

> Tested-by: Robert Nelson <robertcnelson@gmail.com>
> 
> Regards,

Best regards,
Marek Vasut

[U-Boot] zImage and raw ramdisk support -- test

[Wolfgang Denk]

Dear Marek Vasut,

In message <201203302224.20196.marek.vasut@gmail.com> you wrote:
> 
> > and used todays u-boot git head:
> > http://git.denx.de/?p=u-boot.git;a=commit;h=7cb30b13f12077c7eec8ce2419cd96c
> > d65ace8e2
> 
> And it makes u-boot about 20% cooler, doesn't it ;-)

No. Just so many more build warnigns :-(

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bradley's Bromide: If computers get too  powerful,  we  can  organize
them into a committee - that will do them in.

[U-Boot] zImage and raw ramdisk support -- test

[Wolfgang Denk]

Dear Marek Vasut,

In message <201203302224.20196.marek.vasut@gmail.com> you wrote:
> 
> > and used todays u-boot git head:
> > http://git.denx.de/?p=u-boot.git;a=commit;h=7cb30b13f12077c7eec8ce2419cd96c
> > d65ace8e2
> 
> And it makes u-boot about 20% cooler, doesn't it ;-)

No. Just so many more build warnigns :-(

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Bradley's Bromide: If computers get too  powerful,  we  can  organize
them into a committee - that will do them in.