From: Tony Lindgren <tony@atomide.com>
To: Igor Grinberg <grinberg@compulab.co.il>
Cc: Russ Dill <Russ.Dill@ti.com>,
linux-omap@vger.kernel.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Matt Porter <mporter@ti.com>,
robert.marklund@stericsson.com, linus.walleij@linaro.org,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.
Date: Tue, 3 Apr 2012 10:43:17 -0700 [thread overview]
Message-ID: <20120403174317.GE8240@atomide.com> (raw)
In-Reply-To: <4F72B0F5.4080705@compulab.co.il>
* Igor Grinberg <grinberg@compulab.co.il> [120327 23:37]:
> On 03/27/12 20:32, Russ Dill wrote:
> > No objection.
>
> 10x Russ.
I've combined patches 5 - 12 into a single patch as they
pretty much do the same thing, and to cut down
the patch noise for fixes. Merging into fixes with the
updated patch below.
Regards,
Tony
From: Russ Dill <Russ.Dill@ti.com>
Date: Fri, 23 Mar 2012 02:21:37 -0700
Subject: [PATCH] ARM: OMAP2+: smsc911x: Add fixed board regulators
Initialize fixed regulators in the board files. Trying to
do this in a generic way in gpmc-smsc911x.c gets messy as
the regulator may be provided by drivers, such as twl4030,
for some boards.
Signed-off-by: Russ Dill <russ.dill@ti.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
[tony@atomide.com: combined into one patch, updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 41b0a2f..909a8b9 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -26,6 +26,7 @@
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
@@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
};
+static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
static void __init cm_t35_init_ethernet(void)
{
+ regulator_register_fixed(0, cm_t35_smsc911x_supplies,
+ ARRAY_SIZE(cm_t35_smsc911x_supplies));
+ regulator_register_fixed(1, sb_t35_smsc911x_supplies,
+ ARRAY_SIZE(sb_t35_smsc911x_supplies));
+
gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
}
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e558800..930c0d3 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void)
static inline void __init igep_wlan_bt_init(void) { }
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init igep_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Get IGEP2 hardware revision */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d50a562..1b60495 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/io.h>
@@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = {
};
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap_ldp_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
ldp_init_smsc911x();
omap_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b90b319..49df127 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -623,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void)
#endif
}
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
if (cpu_is_omap3630())
omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4a7d8c8..9b3c141 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3logic_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index de95352..4dffc95 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
@@ -410,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3_stalker_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 668533e..33aa391 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = {
{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
};
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
static void __init overo_init(void)
{
int ret;
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_hsmmc_init(mmc);
overo_i2c_init();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1e8540e..f64f441 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,6 +14,9 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
#include <plat/gpmc.h>
#include <plat/gpmc-smsc911x.h>
@@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = {
&zoom_debugboard_serial_device,
};
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
int __init zoom_debugboard_init(void)
{
if (!omap_zoom_debugboard_detect())
return 0;
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
zoom_init_smsc911x();
zoom_init_quaduart();
return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/12] Add dummy smsc911x regulators to cm-t35.
Date: Tue, 3 Apr 2012 10:43:17 -0700 [thread overview]
Message-ID: <20120403174317.GE8240@atomide.com> (raw)
In-Reply-To: <4F72B0F5.4080705@compulab.co.il>
* Igor Grinberg <grinberg@compulab.co.il> [120327 23:37]:
> On 03/27/12 20:32, Russ Dill wrote:
> > No objection.
>
> 10x Russ.
I've combined patches 5 - 12 into a single patch as they
pretty much do the same thing, and to cut down
the patch noise for fixes. Merging into fixes with the
updated patch below.
Regards,
Tony
From: Russ Dill <Russ.Dill@ti.com>
Date: Fri, 23 Mar 2012 02:21:37 -0700
Subject: [PATCH] ARM: OMAP2+: smsc911x: Add fixed board regulators
Initialize fixed regulators in the board files. Trying to
do this in a generic way in gpmc-smsc911x.c gets messy as
the regulator may be provided by drivers, such as twl4030,
for some boards.
Signed-off-by: Russ Dill <russ.dill@ti.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
[tony at atomide.com: combined into one patch, updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 41b0a2f..909a8b9 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -26,6 +26,7 @@
#include <linux/i2c/at24.h>
#include <linux/i2c/twl.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/mmc/host.h>
@@ -81,8 +82,23 @@ static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = {
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
};
+static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
static void __init cm_t35_init_ethernet(void)
{
+ regulator_register_fixed(0, cm_t35_smsc911x_supplies,
+ ARRAY_SIZE(cm_t35_smsc911x_supplies));
+ regulator_register_fixed(1, sb_t35_smsc911x_supplies,
+ ARRAY_SIZE(sb_t35_smsc911x_supplies));
+
gpmc_smsc911x_init(&cm_t35_smsc911x_cfg);
gpmc_smsc911x_init(&sb_t35_smsc911x_cfg);
}
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e558800..930c0d3 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -634,8 +634,14 @@ static void __init igep_wlan_bt_init(void)
static inline void __init igep_wlan_bt_init(void) { }
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init igep_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* Get IGEP2 hardware revision */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d50a562..1b60495 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -22,6 +22,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/io.h>
@@ -410,8 +411,14 @@ static struct mtd_partition ldp_nand_partitions[] = {
};
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap_ldp_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
ldp_init_smsc911x();
omap_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b90b319..49df127 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -623,9 +623,15 @@ static void __init omap3_evm_wl12xx_init(void)
#endif
}
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
if (cpu_is_omap3630())
omap3_mux_init(omap36x_board_mux, OMAP_PACKAGE_CBB);
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 4a7d8c8..9b3c141 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -188,8 +189,14 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3logic_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3torpedo_fix_pbias_voltage();
omap3logic_i2c_init();
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index de95352..4dffc95 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
@@ -410,8 +411,14 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
static void __init omap3_stalker_init(void)
{
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_board_config = omap3_stalker_config;
omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 668533e..33aa391 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -498,10 +498,18 @@ static struct gpio overo_bt_gpios[] __initdata = {
{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
};
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+ REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
static void __init overo_init(void)
{
int ret;
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_hsmmc_init(mmc);
overo_i2c_init();
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1e8540e..f64f441 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,6 +14,9 @@
#include <linux/smsc911x.h>
#include <linux/interrupt.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+
#include <plat/gpmc.h>
#include <plat/gpmc-smsc911x.h>
@@ -117,11 +120,17 @@ static struct platform_device *zoom_devices[] __initdata = {
&zoom_debugboard_serial_device,
};
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
int __init zoom_debugboard_init(void)
{
if (!omap_zoom_debugboard_detect())
return 0;
+ regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
zoom_init_smsc911x();
zoom_init_quaduart();
return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
next prev parent reply other threads:[~2012-04-03 17:43 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-23 9:21 [PATCH v2 00/12] Fixup gmpc smsc911x regulator handling Russ Dill
2012-03-23 9:21 ` [PATCH 01/12] Remove odd gpmc_cfg/board_data redirection Russ Dill
2012-03-27 15:45 ` Igor Grinberg
2012-03-23 9:21 ` [PATCH 02/12] Fix possible stale smsc911x flags Russ Dill
2012-03-27 15:47 ` Igor Grinberg
2012-03-23 9:21 ` [PATCH 03/12] Remove unused rate calculation Russ Dill
2012-03-23 9:21 ` [PATCH 04/12] Remove regulator support from gmpc-smsc911x Russ Dill
2012-03-27 15:46 ` Igor Grinberg
2012-03-23 9:21 ` [PATCH 05/12] Add dummy smsc911x regulators to cm-t35 Russ Dill
2012-03-27 15:53 ` Igor Grinberg
2012-03-27 15:53 ` Igor Grinberg
2012-03-27 17:28 ` Tony Lindgren
2012-03-27 17:28 ` Tony Lindgren
2012-03-28 6:33 ` Igor Grinberg
2012-03-28 6:33 ` Igor Grinberg
2012-03-28 17:03 ` Tony Lindgren
2012-03-28 17:03 ` Tony Lindgren
2012-03-30 15:23 ` Igor Grinberg
2012-03-30 15:23 ` Igor Grinberg
2012-04-03 17:26 ` Tony Lindgren
2012-04-03 17:26 ` Tony Lindgren
2012-03-27 18:32 ` Russ Dill
2012-03-27 18:32 ` Russ Dill
2012-03-28 6:34 ` Igor Grinberg
2012-03-28 6:34 ` Igor Grinberg
2012-04-03 17:43 ` Tony Lindgren [this message]
2012-04-03 17:43 ` Tony Lindgren
2012-04-05 7:34 ` Igor Grinberg
2012-04-05 7:34 ` Igor Grinberg
2012-03-23 9:21 ` [PATCH 06/12] Add dummy smsc911x regulators to igep0020 Russ Dill
2012-03-23 9:21 ` [PATCH 07/12] Add dummy smsc911x regulators to ldp Russ Dill
2012-03-23 9:21 ` [PATCH 08/12] Add dummy smsc911x regulators to omap3evm Russ Dill
2012-03-23 9:21 ` [PATCH 09/12] Add dummy smsc911x regulators to omap3logic Russ Dill
2012-03-23 9:21 ` [PATCH 10/12] Add dummy smsc911x regulators to omap3stalker Russ Dill
2012-03-23 9:21 ` [PATCH 11/12] Add dummy smsc911x regulators to overo Russ Dill
2012-03-23 9:21 ` [PATCH 12/12] Add dummy smsc911x regulators to zoom-debugboard Russ Dill
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120403174317.GE8240@atomide.com \
--to=tony@atomide.com \
--cc=Russ.Dill@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=grinberg@compulab.co.il \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mporter@ti.com \
--cc=robert.marklund@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.