Re: [PATCH 4/5] IIO: AT91: ADC: Add support for the AT91SAM9M10G45-EK board

[Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>]

> diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
> index e1bea73..dca46c8 100644
> --- a/arch/arm/mach-at91/board-sam9m10g45ek.c
> +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
> @@ -27,6 +27,8 @@
>  #include <linux/atmel-mci.h>
>  #include <linux/delay.h>
>  
> +#include <linux/platform_data/at91_adc.h>
> +
>  #include <mach/hardware.h>
>  #include <video/atmel_lcdc.h>
>  #include <media/soc_camera.h>
> @@ -314,6 +316,13 @@ static struct at91_tsadcc_data ek_tsadcc_data = {
>  	.ts_sample_hold_time	= 0x0a,
>  };
>  
> +/*
> + * ADCs
> + */
> +static struct at91_adc_data ek_adc_data = {
> +	.channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
> +	.vref = 3300,
> +};
>  
>  /*
>   * GPIO Buttons
> @@ -479,6 +488,8 @@ static void __init ek_board_init(void)
>  	at91_add_device_lcdc(&ek_lcdc_data);
>  	/* Touch Screen */
>  	at91_add_device_tsadcc(&ek_tsadcc_data);
> +	/* ADC */
> +	at91_add_device_adc(&ek_adc_data);
>  	/* Push Buttons */
>  	ek_add_device_buttons();
>  	/* AC97 */
> diff --git a/drivers/staging/iio/adc/at91_adc.c b/drivers/staging/iio/adc/at91_adc.c
> index c76516a..04bac43 100644
> --- a/drivers/staging/iio/adc/at91_adc.c
> +++ b/drivers/staging/iio/adc/at91_adc.c
> @@ -56,6 +56,13 @@ struct at91_adc_state {
>  	wait_queue_head_t	wq_data_avail;
>  };
>  
> +static struct at91_adc_desc at91_adc_desc_sam9g45 = {
> +	.clock = 13200000,
> +	.clock_name = "tsc_clk",
> +	.num_channels = 8,
> +	.startup_time = 40,
> +};
> +
>  static struct at91_adc_desc at91_adc_desc_sam9g20 = {
>  	.clock = 5000000,
>  	.clock_name = "adc_clk",
> @@ -70,6 +77,11 @@ static int at91_adc_select_soc(struct at91_adc_state *st)
>  		return 0;
>  	}
>  
> +	if (cpu_is_at91sam9g45()) {
> +		st->desc = &at91_adc_desc_sam9g45;
> +		return 0;
> +	}
> +
>  	return -ENODEV;
>  }
>  
soc specific

Best Regards,
J.