All of lore.kernel.org
 help / color / mirror / Atom feed
From: alexandre.belloni@piout.net (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [alexandre.belloni@piout.net: AT91SAM9261-EK still broken ?]
Date: Mon, 9 Apr 2012 22:56:53 +0200	[thread overview]
Message-ID: <20120409205653.GA10737@piout.net> (raw)
In-Reply-To: <20120409192055.GA7092@piout.net>

Hi again,

More info, I get almost the same behavior while booting from nand.
ts_calibrate and ubiattach seem to trigger the issue.

ifconfig eth0 192.168.1.222
dm9000 dm9000.0: eth0: link down
# dm9000 dm9000.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: seq=0 ttl=64 time=12.184 ms
[...]
--- 192.168.1.1 ping statistics ---
28 packets transmitted, 28 packets received, 0% packet loss
round-trip min/avg/max = 0.471/5.027/14.160 ms
# ts_calibrate 
xres = 240, yres = 320
signal 2 caught
# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x258/0x278()
NETDEV WATCHDOG: eth0 (dm9000): transmit queue 0 timed out
Modules linked in:
[<c0012614>] (unwind_backtrace+0x0/0xf0) from [<c0019f98>] (warn_slowpath_common+0x4c/0x64)
[<c0019f98>] (warn_slowpath_common+0x4c/0x64) from [<c001a044>] (warn_slowpath_fmt+0x30/0x40)
[<c001a044>] (warn_slowpath_fmt+0x30/0x40) from [<c0250010>] (dev_watchdog+0x258/0x278)
[<c0250010>] (dev_watchdog+0x258/0x278) from [<c002370c>] (run_timer_softirq+0xf8/0x230)
[<c002370c>] (run_timer_softirq+0xf8/0x230) from [<c001f140>] (__do_softirq+0x90/0x120)
[<c001f140>] (__do_softirq+0x90/0x120) from [<c001f534>] (irq_exit+0x48/0x50)
[<c001f534>] (irq_exit+0x48/0x50) from [<c000e980>] (handle_IRQ+0x44/0x98)
[<c000e980>] (handle_IRQ+0x44/0x98) from [<c000dd78>] (__irq_svc+0x38/0x60)
[<c000dd78>] (__irq_svc+0x38/0x60) from [<c000eacc>] (default_idle+0x24/0x40)
[<c000eacc>] (default_idle+0x24/0x40) from [<c000ec90>] (cpu_idle+0x84/0xbc)
[<c000ec90>] (cpu_idle+0x84/0xbc) from [<c03f76e0>] (start_kernel+0x24c/0x290)
---[ end trace 93ffb7dfd2d10fb0 ]---
--- 192.168.1.1 ping statistics ---
9 packets transmitted, 0 packets received, 100% packet loss


On Mon, Apr 09, 2012 at 09:20:55PM +0200, Alexandre Belloni wrote :
> Hum, I got the wrong list...
> 
> ----- Forwarded message from Alexandre Belloni <alexandre.belloni@piout.net> -----
> 
> Date: Mon, 9 Apr 2012 21:10:25 +0200
> From: Alexandre Belloni <alexandre.belloni@piout.net>
> To: linux-arm-kernel at lists.arm.linux.org.uk
> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Subject: AT91SAM9261-EK still broken ?
> User-Agent: Mutt/1.5.21 (2010-09-15)
> 
> Hi Jean-Christophe,
> 
> I'm using linux 3.4-rc2 and it seems I'm running in the same issue that
> was described there: https://lkml.org/lkml/2011/8/8/355
> 
> I didn't have a deep look into it but when I try to use ts_calibrate or
> ts_test, the network interface is freezing. As I'm using nfs to boot, I
> can't do anything anymore...
> 
> Kernel message:
> 
> # ts_calibrate 
> ------------[ cut here ]------------
> WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0x258/0x278()
> NETDEV WATCHDOG: eth0 (dm9000): transmit queue 0 timed out
> Modules linked in:
> [<c0012614>] (unwind_backtrace+0x0/0xf0) from [<c0019f98>] (warn_slowpath_common+0x4c/0x64)
> [<c0019f98>] (warn_slowpath_common+0x4c/0x64) from [<c001a044>] (warn_slowpath_fmt+0x30/0x40)
> [<c001a044>] (warn_slowpath_fmt+0x30/0x40) from [<c023fb70>] (dev_watchdog+0x258/0x278)
> [<c023fb70>] (dev_watchdog+0x258/0x278) from [<c002370c>] (run_timer_softirq+0xf8/0x230)
> [<c002370c>] (run_timer_softirq+0xf8/0x230) from [<c001f140>] (__do_softirq+0x90/0x120)
> [<c001f140>] (__do_softirq+0x90/0x120) from [<c001f534>] (irq_exit+0x48/0x50)
> [<c001f534>] (irq_exit+0x48/0x50) from [<c000e980>] (handle_IRQ+0x44/0x98)
> [<c000e980>] (handle_IRQ+0x44/0x98) from [<c000dd78>] (__irq_svc+0x38/0x60)
> [<c000dd78>] (__irq_svc+0x38/0x60) from [<c000eacc>] (default_idle+0x24/0x40)
> [<c000eacc>] (default_idle+0x24/0x40) from [<c000ec90>] (cpu_idle+0x84/0xbc)
> [<c000ec90>] (cpu_idle+0x84/0xbc) from [<c03e16e0>] (start_kernel+0x24c/0x290)
> ---[ end trace e6a4b7e1afc454c3 ]---
> nfs: server 192.168.1.1 not responding, still trying
> 
> Regards,
> 
> -- 
> Alexandre Belloni
> 
> ----- End forwarded message -----
> 
> -- 
> Alexandre Belloni
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Alexandre Belloni

  reply	other threads:[~2012-04-09 20:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-09 19:20 [alexandre.belloni@piout.net: AT91SAM9261-EK still broken ?] Alexandre Belloni
2012-04-09 20:56 ` Alexandre Belloni [this message]
2012-04-10 16:32   ` Jean-Christophe PLAGNIOL-VILLARD
2012-04-11  8:23     ` Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120409205653.GA10737@piout.net \
    --to=alexandre.belloni@piout.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.