All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fengguang Wu <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Keith Packard <keithp@keithp.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	alsa-devel@alsa-project.org,
	Nick Bowler <nbowler@elliptictech.com>,
	Stephen Warren <swarren@wwwdotorg.org>
Subject: Re: [PATCH] alsa: hide HDMI/ELD printks unless in debug kernels
Date: Tue, 10 Apr 2012 17:00:35 +0800	[thread overview]
Message-ID: <20120410090035.GA24518@localhost> (raw)
In-Reply-To: <s5hty0sunif.wl%tiwai@suse.de>

On Tue, Apr 10, 2012 at 08:08:56AM +0200, Takashi Iwai wrote:
> At Mon, 09 Apr 2012 09:12:44 -0600,
> Stephen Warren wrote:
> > 
> > On 04/08/2012 08:15 PM, Fengguang Wu wrote:
> > > These trivial messages will show up repeatedly on hot plug as well as
> > > video mode changes, which could be annoying.
> > > 
> > > Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
> > 
> > Those messages are very useful for end-users to diagnose problems with
> > HDMI audio. Is there a way to make the messages dynamic, so users can
> > get them if they want, without recompiling their kernel?
> 
> We can define a new macro like below, add call like _snd_printd(2,
> ....) instead of snd_printd().
> (Yes, the number 2 can be replaced better in an enum, too.)
> 
> In future, we should move to the standard dynamic_printk, but a patch
> like this would be a good compromise for merging to 3.4 kernel, IMO.

OK. How about this?

Subject: alsa: hide HDMI/ELD printks unless snd.debug=2
Date: Fri Nov 11 19:09:36 CST 2011

Also remove two warnings when CONFIG_SND_DEBUG is not set:

sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable]
sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable]

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
 include/sound/core.h       |   10 ++++++++++
 sound/pci/hda/hda_eld.c    |    6 +++---
 sound/pci/hda/patch_hdmi.c |    9 ++++-----
 3 files changed, 17 insertions(+), 8 deletions(-)

--- linux.orig/sound/pci/hda/hda_eld.c	2012-04-10 16:51:00.737707853 +0800
+++ linux/sound/pci/hda/hda_eld.c	2012-04-10 16:51:08.105708029 +0800
@@ -418,7 +418,7 @@ static void hdmi_show_short_audio_desc(s
 	else
 		buf2[0] = '\0';
 
-	printk(KERN_INFO "HDMI: supports coding type %s:"
+	_snd_printd(SND_PR_VERBOSE, "HDMI: supports coding type %s:"
 			" channels = %d, rates =%s%s\n",
 			cea_audio_coding_type_names[a->format],
 			a->channels,
@@ -442,14 +442,14 @@ void snd_hdmi_show_eld(struct hdmi_eld *
 {
 	int i;
 
-	printk(KERN_INFO "HDMI: detected monitor %s at connection type %s\n",
+	_snd_printd(SND_PR_VERBOSE, "HDMI: detected monitor %s at connection type %s\n",
 			e->monitor_name,
 			eld_connection_type_names[e->conn_type]);
 
 	if (e->spk_alloc) {
 		char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
 		snd_print_channel_allocation(e->spk_alloc, buf, sizeof(buf));
-		printk(KERN_INFO "HDMI: available speakers:%s\n", buf);
+		_snd_printd(SND_PR_VERBOSE, "HDMI: available speakers:%s\n", buf);
 	}
 
 	for (i = 0; i < e->sad_count; i++)
--- linux.orig/sound/pci/hda/patch_hdmi.c	2012-04-10 16:51:00.745707854 +0800
+++ linux/sound/pci/hda/patch_hdmi.c	2012-04-10 16:55:35.813714391 +0800
@@ -757,8 +757,6 @@ static void hdmi_intrinsic_event(struct
 	struct hdmi_spec *spec = codec->spec;
 	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
 	int pin_nid;
-	int pd = !!(res & AC_UNSOL_RES_PD);
-	int eldv = !!(res & AC_UNSOL_RES_ELDV);
 	int pin_idx;
 	struct hda_jack_tbl *jack;
 
@@ -768,9 +766,10 @@ static void hdmi_intrinsic_event(struct
 	pin_nid = jack->nid;
 	jack->jack_dirty = 1;
 
-	printk(KERN_INFO
+	_snd_printd(SND_PR_VERBOSE,
 		"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
-		codec->addr, pin_nid, pd, eldv);
+		codec->addr, pin_nid,
+		!!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV));
 
 	pin_idx = pin_nid_to_pin_index(spec, pin_nid);
 	if (pin_idx < 0)
@@ -992,7 +991,7 @@ static void hdmi_present_sense(struct hd
 	if (eld->monitor_present)
 		eld_valid	= !!(present & AC_PINSENSE_ELDV);
 
-	printk(KERN_INFO
+	_snd_printd(SND_PR_VERBOSE,
 		"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
 		codec->addr, pin_nid, eld->monitor_present, eld_valid);
 
--- linux.orig/include/sound/core.h	2012-04-10 16:51:00.757707854 +0800
+++ linux/include/sound/core.h	2012-04-10 16:51:08.105708029 +0800
@@ -325,6 +325,13 @@ void release_and_free_resource(struct re
 
 /* --- */
 
+/* sound printk debug levels */
+enum {
+	SND_PR_ALWAYS,
+	SND_PR_DEBUG,
+	SND_PR_VERBOSE,
+};
+
 #if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
 __printf(4, 5)
 void __snd_printk(unsigned int level, const char *file, int line,
@@ -354,6 +361,8 @@ void __snd_printk(unsigned int level, co
  */
 #define snd_printd(fmt, args...) \
 	__snd_printk(1, __FILE__, __LINE__, fmt, ##args)
+#define _snd_printd(level, fmt, args...) \
+	__snd_printk(level, __FILE__, __LINE__, fmt, ##args)
 
 /**
  * snd_BUG - give a BUG warning message and stack trace
@@ -383,6 +392,7 @@ void __snd_printk(unsigned int level, co
 #else /* !CONFIG_SND_DEBUG */
 
 #define snd_printd(fmt, args...)	do { } while (0)
+#define _snd_printd(level, fmt, args...) do { } while (0)
 #define snd_BUG()			do { } while (0)
 static inline int __snd_bug_on(int cond)
 {
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

WARNING: multiple messages have this Message-ID (diff)
From: Fengguang Wu <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>,
	alsa-devel@alsa-project.org,
	Nick Bowler <nbowler@elliptictech.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Keith Packard <keithp@keithp.com>
Subject: Re: [PATCH] alsa: hide HDMI/ELD printks unless in debug kernels
Date: Tue, 10 Apr 2012 17:00:35 +0800	[thread overview]
Message-ID: <20120410090035.GA24518@localhost> (raw)
In-Reply-To: <s5hty0sunif.wl%tiwai@suse.de>

On Tue, Apr 10, 2012 at 08:08:56AM +0200, Takashi Iwai wrote:
> At Mon, 09 Apr 2012 09:12:44 -0600,
> Stephen Warren wrote:
> > 
> > On 04/08/2012 08:15 PM, Fengguang Wu wrote:
> > > These trivial messages will show up repeatedly on hot plug as well as
> > > video mode changes, which could be annoying.
> > > 
> > > Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
> > 
> > Those messages are very useful for end-users to diagnose problems with
> > HDMI audio. Is there a way to make the messages dynamic, so users can
> > get them if they want, without recompiling their kernel?
> 
> We can define a new macro like below, add call like _snd_printd(2,
> ....) instead of snd_printd().
> (Yes, the number 2 can be replaced better in an enum, too.)
> 
> In future, we should move to the standard dynamic_printk, but a patch
> like this would be a good compromise for merging to 3.4 kernel, IMO.

OK. How about this?

Subject: alsa: hide HDMI/ELD printks unless snd.debug=2
Date: Fri Nov 11 19:09:36 CST 2011

Also remove two warnings when CONFIG_SND_DEBUG is not set:

sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable]
sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable]

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
---
 include/sound/core.h       |   10 ++++++++++
 sound/pci/hda/hda_eld.c    |    6 +++---
 sound/pci/hda/patch_hdmi.c |    9 ++++-----
 3 files changed, 17 insertions(+), 8 deletions(-)

--- linux.orig/sound/pci/hda/hda_eld.c	2012-04-10 16:51:00.737707853 +0800
+++ linux/sound/pci/hda/hda_eld.c	2012-04-10 16:51:08.105708029 +0800
@@ -418,7 +418,7 @@ static void hdmi_show_short_audio_desc(s
 	else
 		buf2[0] = '\0';
 
-	printk(KERN_INFO "HDMI: supports coding type %s:"
+	_snd_printd(SND_PR_VERBOSE, "HDMI: supports coding type %s:"
 			" channels = %d, rates =%s%s\n",
 			cea_audio_coding_type_names[a->format],
 			a->channels,
@@ -442,14 +442,14 @@ void snd_hdmi_show_eld(struct hdmi_eld *
 {
 	int i;
 
-	printk(KERN_INFO "HDMI: detected monitor %s at connection type %s\n",
+	_snd_printd(SND_PR_VERBOSE, "HDMI: detected monitor %s at connection type %s\n",
 			e->monitor_name,
 			eld_connection_type_names[e->conn_type]);
 
 	if (e->spk_alloc) {
 		char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
 		snd_print_channel_allocation(e->spk_alloc, buf, sizeof(buf));
-		printk(KERN_INFO "HDMI: available speakers:%s\n", buf);
+		_snd_printd(SND_PR_VERBOSE, "HDMI: available speakers:%s\n", buf);
 	}
 
 	for (i = 0; i < e->sad_count; i++)
--- linux.orig/sound/pci/hda/patch_hdmi.c	2012-04-10 16:51:00.745707854 +0800
+++ linux/sound/pci/hda/patch_hdmi.c	2012-04-10 16:55:35.813714391 +0800
@@ -757,8 +757,6 @@ static void hdmi_intrinsic_event(struct
 	struct hdmi_spec *spec = codec->spec;
 	int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
 	int pin_nid;
-	int pd = !!(res & AC_UNSOL_RES_PD);
-	int eldv = !!(res & AC_UNSOL_RES_ELDV);
 	int pin_idx;
 	struct hda_jack_tbl *jack;
 
@@ -768,9 +766,10 @@ static void hdmi_intrinsic_event(struct
 	pin_nid = jack->nid;
 	jack->jack_dirty = 1;
 
-	printk(KERN_INFO
+	_snd_printd(SND_PR_VERBOSE,
 		"HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
-		codec->addr, pin_nid, pd, eldv);
+		codec->addr, pin_nid,
+		!!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV));
 
 	pin_idx = pin_nid_to_pin_index(spec, pin_nid);
 	if (pin_idx < 0)
@@ -992,7 +991,7 @@ static void hdmi_present_sense(struct hd
 	if (eld->monitor_present)
 		eld_valid	= !!(present & AC_PINSENSE_ELDV);
 
-	printk(KERN_INFO
+	_snd_printd(SND_PR_VERBOSE,
 		"HDMI status: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n",
 		codec->addr, pin_nid, eld->monitor_present, eld_valid);
 
--- linux.orig/include/sound/core.h	2012-04-10 16:51:00.757707854 +0800
+++ linux/include/sound/core.h	2012-04-10 16:51:08.105708029 +0800
@@ -325,6 +325,13 @@ void release_and_free_resource(struct re
 
 /* --- */
 
+/* sound printk debug levels */
+enum {
+	SND_PR_ALWAYS,
+	SND_PR_DEBUG,
+	SND_PR_VERBOSE,
+};
+
 #if defined(CONFIG_SND_DEBUG) || defined(CONFIG_SND_VERBOSE_PRINTK)
 __printf(4, 5)
 void __snd_printk(unsigned int level, const char *file, int line,
@@ -354,6 +361,8 @@ void __snd_printk(unsigned int level, co
  */
 #define snd_printd(fmt, args...) \
 	__snd_printk(1, __FILE__, __LINE__, fmt, ##args)
+#define _snd_printd(level, fmt, args...) \
+	__snd_printk(level, __FILE__, __LINE__, fmt, ##args)
 
 /**
  * snd_BUG - give a BUG warning message and stack trace
@@ -383,6 +392,7 @@ void __snd_printk(unsigned int level, co
 #else /* !CONFIG_SND_DEBUG */
 
 #define snd_printd(fmt, args...)	do { } while (0)
+#define _snd_printd(level, fmt, args...) do { } while (0)
 #define snd_BUG()			do { } while (0)
 static inline int __snd_bug_on(int cond)
 {

  reply	other threads:[~2012-04-10  9:05 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-09  2:15 [PATCH] alsa: hide HDMI/ELD printks unless in debug kernels Fengguang Wu
2012-04-09  2:15 ` Fengguang Wu
2012-04-09 15:12 ` Stephen Warren
2012-04-10  6:08   ` Takashi Iwai
2012-04-10  9:00     ` Fengguang Wu [this message]
2012-04-10  9:00       ` Fengguang Wu
2012-04-10 12:56       ` Takashi Iwai
2012-04-10 12:56         ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120410090035.GA24518@localhost \
    --to=fengguang.wu@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=keithp@keithp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nbowler@elliptictech.com \
    --cc=swarren@wwwdotorg.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.