[PATCH 00/12] GMA500 updates take 2

[PATCH 00/12] GMA500 updates take 2

[Alan Cox]

This version drops the backlight patch while I figure how it breaks some
systems. It adds the now fixed hotplug monitor code.

---

Alan Cox (12):
      gma500: Set the mapping mask
      gma500: Add the base elements of CDV hotplug support
      gma500: Add ops for hotplug support.
      cdv: continue synching up with updated reference code
      gma500: Clean up weirdness in the cdv mode test code
      gma500: support 1080p
      gma500: panel presence check
      gma500: intel_bios updates
      gma500: mark framebuffer pages write combining
      gma500: Update the Cedarview clock handling
      gma500: read the PLL bits
      gma500: Fix leak of uncached page


 drivers/gpu/drm/gma500/cdv_device.c        |   61 ++++
 drivers/gpu/drm/gma500/cdv_intel_crt.c     |   30 +-
 drivers/gpu/drm/gma500/cdv_intel_display.c |  390 +++++++++++++++++++++-------
 drivers/gpu/drm/gma500/cdv_intel_hdmi.c    |    7 -
 drivers/gpu/drm/gma500/cdv_intel_lvds.c    |   74 +++++
 drivers/gpu/drm/gma500/framebuffer.c       |   29 ++
 drivers/gpu/drm/gma500/gem.c               |    2 
 drivers/gpu/drm/gma500/gtt.c               |    6 
 drivers/gpu/drm/gma500/intel_bios.c        |  250 +++++++++++++++++-
 drivers/gpu/drm/gma500/intel_bios.h        |  161 +++++++++++-
 drivers/gpu/drm/gma500/intel_opregion.c    |  117 ++++++++
 drivers/gpu/drm/gma500/mdfld_device.c      |    2 
 drivers/gpu/drm/gma500/oaktrail_device.c   |    2 
 drivers/gpu/drm/gma500/oaktrail_hdmi.c     |    6 
 drivers/gpu/drm/gma500/psb_device.c        |    2 
 drivers/gpu/drm/gma500/psb_drv.c           |    1 
 drivers/gpu/drm/gma500/psb_drv.h           |   18 +
 drivers/gpu/drm/gma500/psb_intel_drv.h     |    3 
 drivers/gpu/drm/gma500/psb_intel_reg.h     |   34 ++
 drivers/gpu/drm/gma500/psb_intel_sdvo.c    |    6 
 drivers/gpu/drm/gma500/psb_irq.c           |   30 ++
 21 files changed, 1035 insertions(+), 196 deletions(-)

-- 
Signature

[PATCH 01/12] gma500: Fix leak of uncached page

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

This was reported a long time ago (and I apologize to whoever it was that
reported it as I've lost the original report).

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/psb_drv.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c
index 09af2ff..45bd0c7 100644
--- a/drivers/gpu/drm/gma500/psb_drv.c
+++ b/drivers/gpu/drm/gma500/psb_drv.c
@@ -246,6 +246,7 @@ static int psb_driver_unload(struct drm_device *dev)
 		}
 		psb_gtt_takedown(dev);
 		if (dev_priv->scratch_page) {
+			set_pages_wb(dev_priv->scratch_page, 1);
 			__free_page(dev_priv->scratch_page);
 			dev_priv->scratch_page = NULL;
 		}

[PATCH 02/12] gma500: read the PLL bits

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

We need to pull more stuff from the VBT in order to configure the clocking
correctly in all cases. Add the relevant bits from the other CDV driver work.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/intel_bios.c |   18 ++++++++++++++++
 drivers/gpu/drm/gma500/intel_bios.h |   39 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/gma500/psb_drv.h    |    2 ++
 3 files changed, 59 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
index d4d0c5b..51ea6df 100644
--- a/drivers/gpu/drm/gma500/intel_bios.c
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -217,6 +217,23 @@ static void parse_general_features(struct drm_psb_private *dev_priv,
 	}
 }
 
+static void
+parse_driver_features(struct drm_psb_private *dev_priv,
+		      struct bdb_header *bdb)
+{
+	struct bdb_driver_features *driver;
+
+	driver = find_section(bdb, BDB_DRIVER_FEATURES);
+	if (!driver)
+		return;
+
+	/* This bit means to use 96Mhz for DPLL_A or not */
+	if (driver->primary_lfp_id)
+		dev_priv->dplla_96mhz = true;
+	else
+		dev_priv->dplla_96mhz = false;
+}
+
 /**
  * psb_intel_init_bios - initialize VBIOS settings & find VBT
  * @dev: DRM device
@@ -263,6 +280,7 @@ bool psb_intel_init_bios(struct drm_device *dev)
 
 	/* Grab useful general definitions */
 	parse_general_features(dev_priv, bdb);
+	parse_driver_features(dev_priv, bdb);
 	parse_lfp_panel_data(dev_priv, bdb);
 	parse_sdvo_panel_data(dev_priv, bdb);
 	parse_backlight_data(dev_priv, bdb);
diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h
index 70f1bf0..c67979e 100644
--- a/drivers/gpu/drm/gma500/intel_bios.h
+++ b/drivers/gpu/drm/gma500/intel_bios.h
@@ -302,6 +302,45 @@ struct bdb_sdvo_lvds_options {
 	u8 panel_misc_bits_4;
 } __attribute__((packed));
 
+struct bdb_driver_features {
+	u8 boot_dev_algorithm:1;
+	u8 block_display_switch:1;
+	u8 allow_display_switch:1;
+	u8 hotplug_dvo:1;
+	u8 dual_view_zoom:1;
+	u8 int15h_hook:1;
+	u8 sprite_in_clone:1;
+	u8 primary_lfp_id:1;
+
+	u16 boot_mode_x;
+	u16 boot_mode_y;
+	u8 boot_mode_bpp;
+	u8 boot_mode_refresh;
+
+	u16 enable_lfp_primary:1;
+	u16 selective_mode_pruning:1;
+	u16 dual_frequency:1;
+	u16 render_clock_freq:1; /* 0: high freq; 1: low freq */
+	u16 nt_clone_support:1;
+	u16 power_scheme_ui:1; /* 0: CUI; 1: 3rd party */
+	u16 sprite_display_assign:1; /* 0: secondary; 1: primary */
+	u16 cui_aspect_scaling:1;
+	u16 preserve_aspect_ratio:1;
+	u16 sdvo_device_power_down:1;
+	u16 crt_hotplug:1;
+	u16 lvds_config:2;
+	u16 tv_hotplug:1;
+	u16 hdmi_config:2;
+
+	u8 static_display:1;
+	u8 reserved2:7;
+	u16 legacy_crt_max_x;
+	u16 legacy_crt_max_y;
+	u8 legacy_crt_max_refresh;
+
+	u8 hdmi_termination;
+	u8 custom_vbt_version;
+} __attribute__((packed));
 
 extern bool psb_intel_init_bios(struct drm_device *dev);
 extern void psb_intel_destroy_bios(struct drm_device *dev);
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 40ce2c9..4c50969 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -669,6 +669,8 @@ struct drm_psb_private {
 	u32 dspcntr[3];
 
 	int mdfld_panel_id;
+
+	bool dplla_96mhz;	/* DPLL data from the VBT */
 };

[PATCH 03/12] gma500: Update the Cedarview clock handling

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>


---

 drivers/gpu/drm/gma500/cdv_intel_display.c |  331 +++++++++++++++++++++++-----
 drivers/gpu/drm/gma500/psb_intel_drv.h     |    3 
 drivers/gpu/drm/gma500/psb_intel_reg.h     |   25 ++
 3 files changed, 294 insertions(+), 65 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
index be84559..07b37f5 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_display.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -216,7 +216,7 @@ static void cdv_sb_reset(struct drm_device *dev)
  */
 static int
 cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
-			       struct cdv_intel_clock_t *clock)
+			       struct cdv_intel_clock_t *clock, bool is_lvds)
 {
 	struct psb_intel_crtc *psb_crtc =
 				to_psb_intel_crtc(crtc);
@@ -224,6 +224,7 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 	u32 m, n_vco, p;
 	int ret = 0;
 	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
+	int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB;
 	u32 ref_value;
 
 	cdv_sb_reset(dev);
@@ -241,6 +242,35 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 	/* We don't know what the other fields of these regs are, so
 	 * leave them in place.
 	 */
+	/* 
+	 * The BIT 14:13 of 0x8010/0x8030 is used to select the ref clk
+	 * for the pipe A/B. Display spec 1.06 has wrong definition.
+	 * Correct definition is like below:
+	 *
+	 * refclka mean use clock from same PLL
+	 *
+	 * if DPLLA sets 01 and DPLLB sets 01, they use clock from their pll
+	 *
+	 * if DPLLA sets 01 and DPLLB sets 02, both use clk from DPLLA
+	 *
+	 */  
+	ret = cdv_sb_read(dev, ref_sfr, &ref_value);
+	if (ret)
+		return ret;
+	ref_value &= ~(REF_CLK_MASK);
+
+	/* use DPLL_A for pipeB on CRT/HDMI */
+	if (pipe == 1 && !is_lvds) {
+		DRM_DEBUG_KMS("use DPLLA for pipe B\n");
+		ref_value |= REF_CLK_DPLLA;
+	} else {
+		DRM_DEBUG_KMS("use their DPLL for pipe A/B\n");
+		ref_value |= REF_CLK_DPLL;
+	}
+	ret = cdv_sb_write(dev, ref_sfr, ref_value);
+	if (ret)
+		return ret;
+
 	ret = cdv_sb_read(dev, SB_M(pipe), &m);
 	if (ret)
 		return ret;
@@ -308,7 +338,7 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 		return ret;
 
 	/* always Program the Lane Register for the Pipe A*/
-	if (pipe == 0) {
+/* 	if (pipe == 0) */ {
 		/* Program the Lane0/1 for HDMI B */
 		u32 lane_reg, lane_value;
 
@@ -553,6 +583,200 @@ psb_intel_pipe_set_base_exit:
 	return ret;
 }
 
+#define		FIFO_PIPEA		(1 << 0)
+#define		FIFO_PIPEB		(1 << 1)
+
+static bool cdv_intel_pipe_enabled(struct drm_device *dev, int pipe)
+{
+	struct drm_crtc *crtc;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = NULL;
+
+	crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+	psb_intel_crtc = to_psb_intel_crtc(crtc);
+
+	if (crtc->fb == NULL || !psb_intel_crtc->active)
+		return false;
+	return true;
+}
+
+static bool cdv_intel_single_pipe_active (struct drm_device *dev)
+{
+	uint32_t pipe_enabled = 0;
+
+	if (cdv_intel_pipe_enabled(dev, 0))
+		pipe_enabled |= FIFO_PIPEA;
+
+	if (cdv_intel_pipe_enabled(dev, 1))
+		pipe_enabled |= FIFO_PIPEB;
+
+
+	DRM_DEBUG_KMS("pipe enabled %x\n", pipe_enabled);
+
+	if (pipe_enabled == FIFO_PIPEA || pipe_enabled == FIFO_PIPEB)
+		return true;
+	else
+		return false;
+}
+
+static bool is_pipeb_lvds(struct drm_device *dev, struct drm_crtc *crtc)
+{
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *connector;
+
+	if (psb_intel_crtc->pipe != 1)
+		return false;
+
+	list_for_each_entry(connector, &mode_config->connector_list, head) {
+		struct psb_intel_encoder *psb_intel_encoder =
+					psb_intel_attached_encoder(connector);
+
+		if (!connector->encoder
+		    || connector->encoder->crtc != crtc)
+			continue;
+
+		if (psb_intel_encoder->type == INTEL_OUTPUT_LVDS)
+			return true;
+	}
+
+	return false;
+}
+
+static void cdv_intel_disable_self_refresh (struct drm_device *dev)
+{
+	if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) {
+
+		/* Disable self-refresh before adjust WM */
+		REG_WRITE(FW_BLC_SELF, (REG_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN));
+		REG_READ(FW_BLC_SELF);
+
+		cdv_intel_wait_for_vblank(dev);
+
+		/* Cedarview workaround to write ovelay plane, which force to leave
+		 * MAX_FIFO state.
+		 */
+		REG_WRITE(OV_OVADD, 0/*dev_priv->ovl_offset*/);
+		REG_READ(OV_OVADD);
+
+		cdv_intel_wait_for_vblank(dev);
+	}
+
+}
+
+static void cdv_intel_update_watermark (struct drm_device *dev, struct drm_crtc *crtc)
+{
+
+	if (cdv_intel_single_pipe_active(dev)) {
+		u32 fw;
+
+		fw = REG_READ(DSPFW1);
+		fw &= ~DSP_FIFO_SR_WM_MASK;
+		fw |= (0x7e << DSP_FIFO_SR_WM_SHIFT);
+		fw &= ~CURSOR_B_FIFO_WM_MASK;
+		fw |= (0x4 << CURSOR_B_FIFO_WM_SHIFT);
+		REG_WRITE(DSPFW1, fw);
+
+		fw = REG_READ(DSPFW2);
+		fw &= ~CURSOR_A_FIFO_WM_MASK;
+		fw |= (0x6 << CURSOR_A_FIFO_WM_SHIFT);
+		fw &= ~DSP_PLANE_C_FIFO_WM_MASK;
+		fw |= (0x8 << DSP_PLANE_C_FIFO_WM_SHIFT);
+		REG_WRITE(DSPFW2, fw);
+
+		REG_WRITE(DSPFW3, 0x36000000);
+
+		/* ignore FW4 */
+
+		if (is_pipeb_lvds(dev, crtc)) {
+			REG_WRITE(DSPFW5, 0x00040330);
+		} else {
+			fw = (3 << DSP_PLANE_B_FIFO_WM1_SHIFT) |
+			     (4 << DSP_PLANE_A_FIFO_WM1_SHIFT) |
+			     (3 << CURSOR_B_FIFO_WM1_SHIFT) |
+			     (4 << CURSOR_FIFO_SR_WM1_SHIFT);
+			REG_WRITE(DSPFW5, fw);
+		}
+
+		REG_WRITE(DSPFW6, 0x10);
+
+		cdv_intel_wait_for_vblank(dev);
+
+		/* enable self-refresh for single pipe active */
+		REG_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+		REG_READ(FW_BLC_SELF);
+		cdv_intel_wait_for_vblank(dev);
+
+	} else {
+
+		/* HW team suggested values... */
+		REG_WRITE(DSPFW1, 0x3f880808);
+		REG_WRITE(DSPFW2, 0x0b020202);
+		REG_WRITE(DSPFW3, 0x24000000);
+		REG_WRITE(DSPFW4, 0x08030202);
+		REG_WRITE(DSPFW5, 0x01010101);
+		REG_WRITE(DSPFW6, 0x1d0);
+
+		cdv_intel_wait_for_vblank(dev);
+
+		cdv_intel_disable_self_refresh(dev);
+	
+	}
+}
+
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+static void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv =
+				(struct drm_psb_private *)dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
+	int palreg = PALETTE_A;
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled)
+		return;
+
+	switch (psb_intel_crtc->pipe) {
+	case 0:
+		break;
+	case 1:
+		palreg = PALETTE_B;
+		break;
+	case 2:
+		palreg = PALETTE_C;
+		break;
+	default:
+		dev_err(dev->dev, "Illegal Pipe Number.\n");
+		return;
+	}
+
+	if (gma_power_begin(dev, false)) {
+		for (i = 0; i < 256; i++) {
+			REG_WRITE(palreg + 4 * i,
+				  ((psb_intel_crtc->lut_r[i] +
+				  psb_intel_crtc->lut_adj[i]) << 16) |
+				  ((psb_intel_crtc->lut_g[i] +
+				  psb_intel_crtc->lut_adj[i]) << 8) |
+				  (psb_intel_crtc->lut_b[i] +
+				  psb_intel_crtc->lut_adj[i]));
+		}
+		gma_power_end(dev);
+	} else {
+		for (i = 0; i < 256; i++) {
+			dev_priv->regs.psb.save_palette_a[i] =
+				  ((psb_intel_crtc->lut_r[i] +
+				  psb_intel_crtc->lut_adj[i]) << 16) |
+				  ((psb_intel_crtc->lut_g[i] +
+				  psb_intel_crtc->lut_adj[i]) << 8) |
+				  (psb_intel_crtc->lut_b[i] +
+				  psb_intel_crtc->lut_adj[i]);
+		}
+
+	}
+}
+
 /**
  * Sets the power management mode of the pipe and plane.
  *
@@ -568,15 +792,23 @@ static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 	int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
 	int dspbase_reg = (pipe == 0) ? DSPABASE : DSPBBASE;
 	int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
+	int pipestat_reg = (pipe == 0) ? PIPEASTAT : PIPEBSTAT;
 	u32 temp;
 
 	/* XXX: When our outputs are all unaware of DPMS modes other than off
 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
 	 */
+	cdv_intel_disable_self_refresh(dev);
+
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 	case DRM_MODE_DPMS_STANDBY:
 	case DRM_MODE_DPMS_SUSPEND:
+		if (psb_intel_crtc->active)
+			return;
+
+		psb_intel_crtc->active = true;
+
 		/* Enable the DPLL */
 		temp = REG_READ(dpll_reg);
 		if ((temp & DPLL_VCO_ENABLE) == 0) {
@@ -611,13 +843,26 @@ static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 		if ((temp & PIPEACONF_ENABLE) == 0)
 			REG_WRITE(pipeconf_reg, temp | PIPEACONF_ENABLE);
 
-		psb_intel_crtc_load_lut(crtc);
+		temp = REG_READ(pipestat_reg);
+		temp &= ~(0xFFFF);
+		temp |= PIPE_FIFO_UNDERRUN;
+		REG_WRITE(pipestat_reg, temp);
+		REG_READ(pipestat_reg);
+
+		cdv_intel_update_watermark(dev, crtc);
+		cdv_intel_crtc_load_lut(crtc);
 
 		/* Give the overlay scaler a chance to enable
 		 * if it's on this pipe */
 		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
+		psb_intel_crtc->crtc_enable = true;
 		break;
 	case DRM_MODE_DPMS_OFF:
+		if (!psb_intel_crtc->active)
+			return;
+
+		psb_intel_crtc->active = false;
+
 		/* Give the overlay scaler a chance to disable
 		 * if it's on this pipe */
 		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
@@ -627,6 +872,7 @@ static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 		/* Jim Bish - changed pipe/plane here as well. */
 
+		drm_vblank_off(dev, pipe);
 		/* Wait for vblank for the disable to take effect */
 		cdv_intel_wait_for_vblank(dev);
 
@@ -660,6 +906,8 @@ static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 
 		/* Wait for the clocks to turn off. */
 		udelay(150);
+		cdv_intel_update_watermark(dev, crtc);
+		psb_intel_crtc->crtc_enable = false;
 		break;
 	}
 	/*Set FIFO Watermarks*/
@@ -709,6 +957,7 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
 			       struct drm_framebuffer *old_fb)
 {
 	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
 	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
 	int pipe = psb_intel_crtc->pipe;
 	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
@@ -757,13 +1006,18 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
 		}
 	}
 
-	refclk = 96000;
-
-	/* Hack selection about ref clk for CRT */
-	/* Select 27MHz as the reference clk for HDMI */
-	if (is_crt || is_hdmi)
+	if (dev_priv->dplla_96mhz)
+		/* low-end sku, 96/100 mhz */
+		refclk = 96000;
+	else
+		/* high-end sku, 27/100 mhz */
 		refclk = 27000;
 
+	if (is_lvds && dev_priv->lvds_use_ssc) {
+		refclk = dev_priv->lvds_ssc_freq * 1000;
+		DRM_DEBUG_KMS("Use SSC reference clock %d Mhz\n", dev_priv->lvds_ssc_freq);
+	}
+
 	drm_mode_debug_printmodeline(adjusted_mode);
 
 	ok = cdv_intel_find_best_PLL(crtc, adjusted_mode->clock, refclk,
@@ -779,14 +1033,13 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
 /*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
 		dpll |= 3;
 	}
-		dpll |= PLL_REF_INPUT_DREFCLK;
+/*		dpll |= PLL_REF_INPUT_DREFCLK; */
 
 	dpll |= DPLL_SYNCLOCK_ENABLE;
-	dpll |= DPLL_VGA_MODE_DIS;
-	if (is_lvds)
+/*	if (is_lvds)
 		dpll |= DPLLB_MODE_LVDS;
 	else
-		dpll |= DPLLB_MODE_DAC_SERIAL;
+		dpll |= DPLLB_MODE_DAC_SERIAL; */
 	/* dpll |= (2 << 11); */
 
 	/* setup pipeconf */
@@ -806,7 +1059,7 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
 	REG_WRITE(dpll_reg, dpll | DPLL_VGA_MODE_DIS | DPLL_SYNCLOCK_ENABLE);
 	REG_READ(dpll_reg);
 
-	cdv_dpll_set_clock_cdv(dev, crtc, &clock);
+	cdv_dpll_set_clock_cdv(dev, crtc, &clock, is_lvds);
 
 	udelay(150);
 
@@ -903,58 +1156,6 @@ static int cdv_intel_crtc_mode_set(struct drm_crtc *crtc,
 	return 0;
 }
 
-/** Loads the palette/gamma unit for the CRTC with the prepared values */
-static void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_psb_private *dev_priv =
-				(struct drm_psb_private *)dev->dev_private;
-	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
-	int palreg = PALETTE_A;
-	int i;
-
-	/* The clocks have to be on to load the palette. */
-	if (!crtc->enabled)
-		return;
-
-	switch (psb_intel_crtc->pipe) {
-	case 0:
-		break;
-	case 1:
-		palreg = PALETTE_B;
-		break;
-	case 2:
-		palreg = PALETTE_C;
-		break;
-	default:
-		dev_err(dev->dev, "Illegal Pipe Number.\n");
-		return;
-	}
-
-	if (gma_power_begin(dev, false)) {
-		for (i = 0; i < 256; i++) {
-			REG_WRITE(palreg + 4 * i,
-				  ((psb_intel_crtc->lut_r[i] +
-				  psb_intel_crtc->lut_adj[i]) << 16) |
-				  ((psb_intel_crtc->lut_g[i] +
-				  psb_intel_crtc->lut_adj[i]) << 8) |
-				  (psb_intel_crtc->lut_b[i] +
-				  psb_intel_crtc->lut_adj[i]));
-		}
-		gma_power_end(dev);
-	} else {
-		for (i = 0; i < 256; i++) {
-			dev_priv->regs.psb.save_palette_a[i] =
-				  ((psb_intel_crtc->lut_r[i] +
-				  psb_intel_crtc->lut_adj[i]) << 16) |
-				  ((psb_intel_crtc->lut_g[i] +
-				  psb_intel_crtc->lut_adj[i]) << 8) |
-				  (psb_intel_crtc->lut_b[i] +
-				  psb_intel_crtc->lut_adj[i]);
-		}
-
-	}
-}
 
 /**
  * Save HW states of giving crtc
diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
index f40535e..81852b4 100644
--- a/drivers/gpu/drm/gma500/psb_intel_drv.h
+++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
@@ -193,6 +193,9 @@ struct psb_intel_crtc {
 	/*crtc mode setting flags*/
 	u32 mode_flags;
 
+	bool active;
+	bool crtc_enable;
+
 	/* Saved Crtc HW states */
 	struct psb_intel_crtc_state *crtc_state;
 };
diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h
index e89d3a2..46792fc 100644
--- a/drivers/gpu/drm/gma500/psb_intel_reg.h
+++ b/drivers/gpu/drm/gma500/psb_intel_reg.h
@@ -505,6 +505,7 @@
 #define PIPE_VSYNC_ENABL			(1UL << 25)
 #define PIPE_HDMI_AUDIO_UNDERRUN		(1UL << 26)
 #define PIPE_HDMI_AUDIO_BUFFER_DONE		(1UL << 27)
+#define PIPE_FIFO_UNDERRUN			(1UL << 31)
 #define PIPE_HDMI_AUDIO_INT_MASK		(PIPE_HDMI_AUDIO_UNDERRUN | \
 						PIPE_HDMI_AUDIO_BUFFER_DONE)
 #define PIPE_EVENT_MASK ((1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)|(1 << 22)|(1 << 21)|(1 << 20)|(1 << 16))
@@ -569,12 +570,27 @@ struct dpst_guardband {
 #define PIPE_PIXEL_MASK		0x00ffffff
 #define PIPE_PIXEL_SHIFT	0
 
+#define FW_BLC_SELF		0x20e0 
+#define FW_BLC_SELF_EN          (1<<15)
+
 #define DSPARB			0x70030
 #define DSPFW1			0x70034
+#define DSP_FIFO_SR_WM_MASK		0xFF800000
+#define DSP_FIFO_SR_WM_SHIFT		23
+#define CURSOR_B_FIFO_WM_MASK		0x003F0000
+#define CURSOR_B_FIFO_WM_SHIFT		16
 #define DSPFW2			0x70038
+#define CURSOR_A_FIFO_WM_MASK		0x3F00
+#define CURSOR_A_FIFO_WM_SHIFT		8
+#define DSP_PLANE_C_FIFO_WM_MASK	0x7F
+#define DSP_PLANE_C_FIFO_WM_SHIFT	0
 #define DSPFW3			0x7003c
 #define DSPFW4			0x70050
 #define DSPFW5			0x70054
+#define DSP_PLANE_B_FIFO_WM1_SHIFT	24
+#define DSP_PLANE_A_FIFO_WM1_SHIFT	16
+#define CURSOR_B_FIFO_WM1_SHIFT		8
+#define CURSOR_FIFO_SR_WM1_SHIFT	0
 #define DSPFW6			0x70058
 #define DSPCHICKENBIT		0x70400
 #define DSPACNTR		0x70180
@@ -1290,6 +1306,15 @@ No status bits are changed.
 #define SB_N_CB_TUNE_MASK			PSB_MASK(25, 24)
 #define SB_N_CB_TUNE_SHIFT			24
 
+/* the bit 14:13 is used to select between the different reference clock for Pipe A/B */
+#define SB_REF_DPLLA		0x8010
+#define SB_REF_DPLLB		0x8030
+#define	REF_CLK_MASK		(0x3 << 13)
+#define REF_CLK_CORE		(0 << 13)
+#define REF_CLK_DPLL		(1 << 13)
+#define REF_CLK_DPLLA		(2 << 13)
+/* For the DPLL B, it will use the reference clk from DPLL A when using (2 << 13) */
+
 #define _SB_REF_A		0x8018
 #define _SB_REF_B		0x8038
 #define SB_REF_SFR(pipe)	_PIPE(pipe, _SB_REF_A, _SB_REF_B)

[PATCH 04/12] gma500: mark framebuffer pages write combining

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

We don't want them uncached, combining will do nicely and fixes the performance
problem with the generic modesetting X server.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/gtt.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c
index c6465b4..db2e823 100644
--- a/drivers/gpu/drm/gma500/gtt.c
+++ b/drivers/gpu/drm/gma500/gtt.c
@@ -93,7 +93,7 @@ static int psb_gtt_insert(struct drm_device *dev, struct gtt_range *r)
 	pages = r->pages;
 
 	/* Make sure changes are visible to the GPU */
-	set_pages_array_uc(pages, r->npage);
+	set_pages_array_wc(pages, r->npage);
 
 	/* Write our page entries into the GTT itself */
 	for (i = r->roll; i < r->npage; i++) {

[PATCH 05/12] gma500: intel_bios updates

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Pull in various i915 bits that we will need to begin tackling the LVDS detect
and ACPI events. We try and drift towards the i915 version of the code with
the long term goal that at least some of it can one day be unified.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/intel_bios.c     |  232 ++++++++++++++++++++++++++++---
 drivers/gpu/drm/gma500/intel_bios.h     |  122 +++++++++++++++-
 drivers/gpu/drm/gma500/intel_opregion.c |  117 ++++++++++++++--
 drivers/gpu/drm/gma500/psb_drv.h        |    4 +
 4 files changed, 438 insertions(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
index 51ea6df..479e449 100644
--- a/drivers/gpu/drm/gma500/intel_bios.c
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -26,6 +26,8 @@
 #include "psb_intel_reg.h"
 #include "intel_bios.h"
 
+#define	SLAVE_ADDR1	0x70
+#define	SLAVE_ADDR2	0x72
 
 static void *find_section(struct bdb_header *bdb, int section_id)
 {
@@ -52,6 +54,16 @@ static void *find_section(struct bdb_header *bdb, int section_id)
 	return NULL;
 }
 
+static u16
+get_blocksize(void *p)
+{
+	u16 *block_ptr, block_size;
+
+	block_ptr = (u16 *)((char *)p - 2);
+	block_size = *block_ptr;
+	return block_size;
+}
+
 static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
 			struct lvds_dvo_timing *dvo_timing)
 {
@@ -75,6 +87,16 @@ static void fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
 	panel_fixed_mode->clock = dvo_timing->clock * 10;
 	panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
 
+	if (dvo_timing->hsync_positive)
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
+	else
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+
+	if (dvo_timing->vsync_positive)
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
+	else
+		panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
 	/* Some VBTs have bogus h/vtotal values */
 	if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
 		panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
@@ -218,6 +240,97 @@ static void parse_general_features(struct drm_psb_private *dev_priv,
 }
 
 static void
+parse_sdvo_device_mapping(struct drm_psb_private *dev_priv,
+			  struct bdb_header *bdb)
+{
+	struct sdvo_device_mapping *p_mapping;
+	struct bdb_general_definitions *p_defs;
+	struct child_device_config *p_child;
+	int i, child_device_num, count;
+	u16	block_size;
+
+	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (!p_defs) {
+		DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n");
+		return;
+	}
+	/* judge whether the size of child device meets the requirements.
+	 * If the child device size obtained from general definition block
+	 * is different with sizeof(struct child_device_config), skip the
+	 * parsing of sdvo device info
+	 */
+	if (p_defs->child_dev_size != sizeof(*p_child)) {
+		/* different child dev size . Ignore it */
+		DRM_DEBUG_KMS("different child size is found. Invalid.\n");
+		return;
+	}
+	/* get the block size of general definitions */
+	block_size = get_blocksize(p_defs);
+	/* get the number of child device */
+	child_device_num = (block_size - sizeof(*p_defs)) /
+				sizeof(*p_child);
+	count = 0;
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		if (p_child->slave_addr != SLAVE_ADDR1 &&
+			p_child->slave_addr != SLAVE_ADDR2) {
+			/*
+			 * If the slave address is neither 0x70 nor 0x72,
+			 * it is not a SDVO device. Skip it.
+			 */
+			continue;
+		}
+		if (p_child->dvo_port != DEVICE_PORT_DVOB &&
+			p_child->dvo_port != DEVICE_PORT_DVOC) {
+			/* skip the incorrect SDVO port */
+			DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
+			continue;
+		}
+		DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
+				" %s port\n",
+				p_child->slave_addr,
+				(p_child->dvo_port == DEVICE_PORT_DVOB) ?
+					"SDVOB" : "SDVOC");
+		p_mapping = &(dev_priv->sdvo_mappings[p_child->dvo_port - 1]);
+		if (!p_mapping->initialized) {
+			p_mapping->dvo_port = p_child->dvo_port;
+			p_mapping->slave_addr = p_child->slave_addr;
+			p_mapping->dvo_wiring = p_child->dvo_wiring;
+			p_mapping->ddc_pin = p_child->ddc_pin;
+			p_mapping->i2c_pin = p_child->i2c_pin;
+			p_mapping->initialized = 1;
+			DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
+				      p_mapping->dvo_port,
+				      p_mapping->slave_addr,
+				      p_mapping->dvo_wiring,
+				      p_mapping->ddc_pin,
+				      p_mapping->i2c_pin);
+		} else {
+			DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
+					 "two SDVO device.\n");
+		}
+		if (p_child->slave2_addr) {
+			/* Maybe this is a SDVO device with multiple inputs */
+			/* And the mapping info is not added */
+			DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
+				" is a SDVO device with multiple inputs.\n");
+		}
+		count++;
+	}
+
+	if (!count) {
+		/* No SDVO device info is found */
+		DRM_DEBUG_KMS("No SDVO device info is found in VBT\n");
+	}
+	return;
+}
+
+
+static void
 parse_driver_features(struct drm_psb_private *dev_priv,
 		      struct bdb_header *bdb)
 {
@@ -234,6 +347,72 @@ parse_driver_features(struct drm_psb_private *dev_priv,
 		dev_priv->dplla_96mhz = false;
 }
 
+static void
+parse_device_mapping(struct drm_psb_private *dev_priv,
+		       struct bdb_header *bdb)
+{
+	struct bdb_general_definitions *p_defs;
+	struct child_device_config *p_child, *child_dev_ptr;
+	int i, child_device_num, count;
+	u16	block_size;
+
+	p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
+	if (!p_defs) {
+		DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
+		return;
+	}
+	/* judge whether the size of child device meets the requirements.
+	 * If the child device size obtained from general definition block
+	 * is different with sizeof(struct child_device_config), skip the
+	 * parsing of sdvo device info
+	 */
+	if (p_defs->child_dev_size != sizeof(*p_child)) {
+		/* different child dev size . Ignore it */
+		DRM_DEBUG_KMS("different child size is found. Invalid.\n");
+		return;
+	}
+	/* get the block size of general definitions */
+	block_size = get_blocksize(p_defs);
+	/* get the number of child device */
+	child_device_num = (block_size - sizeof(*p_defs)) /
+				sizeof(*p_child);
+	count = 0;
+	/* get the number of child devices that are present */
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		count++;
+	}
+	if (!count) {
+		DRM_DEBUG_KMS("no child dev is parsed from VBT\n");
+		return;
+	}
+	dev_priv->child_dev = kcalloc(count, sizeof(*p_child), GFP_KERNEL);
+	if (!dev_priv->child_dev) {
+		DRM_DEBUG_KMS("No memory space for child devices\n");
+		return;
+	}
+
+	dev_priv->child_dev_num = count;
+	count = 0;
+	for (i = 0; i < child_device_num; i++) {
+		p_child = &(p_defs->devices[i]);
+		if (!p_child->device_type) {
+			/* skip the device block if device type is invalid */
+			continue;
+		}
+		child_dev_ptr = dev_priv->child_dev + count;
+		count++;
+		memcpy((void *)child_dev_ptr, (void *)p_child,
+					sizeof(*p_child));
+	}
+	return;
+}
+
+
 /**
  * psb_intel_init_bios - initialize VBIOS settings & find VBT
  * @dev: DRM device
@@ -253,39 +432,54 @@ bool psb_intel_init_bios(struct drm_device *dev)
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	struct pci_dev *pdev = dev->pdev;
 	struct vbt_header *vbt = NULL;
-	struct bdb_header *bdb;
-	u8 __iomem *bios;
+	struct bdb_header *bdb = NULL;
+	u8 __iomem *bios = NULL;
 	size_t size;
 	int i;
 
-	bios = pci_map_rom(pdev, &size);
-	if (!bios)
-		return -1;
+	/* XXX Should this validation be moved to intel_opregion.c? */
+	if (dev_priv->opregion.vbt) {
+		struct vbt_header *vbt = dev_priv->opregion.vbt;
+		if (memcmp(vbt->signature, "$VBT", 4) == 0) {
+			DRM_DEBUG_KMS("Using VBT from OpRegion: %20s\n",
+					 vbt->signature);
+			bdb = (struct bdb_header *)((char *)vbt + vbt->bdb_offset);
+		} else
+			dev_priv->opregion.vbt = NULL;
+	}
 
-	/* Scour memory looking for the VBT signature */
-	for (i = 0; i + 4 < size; i++) {
-		if (!memcmp(bios + i, "$VBT", 4)) {
-			vbt = (struct vbt_header *)(bios + i);
-			break;
+	if (bdb == NULL) {
+		bios = pci_map_rom(pdev, &size);
+		if (!bios)
+			return -1;
+
+		/* Scour memory looking for the VBT signature */
+		for (i = 0; i + 4 < size; i++) {
+			if (!memcmp(bios + i, "$VBT", 4)) {
+				vbt = (struct vbt_header *)(bios + i);
+				break;
+			}
 		}
-	}
 
-	if (!vbt) {
-		dev_err(dev->dev, "VBT signature missing\n");
-		pci_unmap_rom(pdev, bios);
-		return -1;
+		if (!vbt) {
+			dev_err(dev->dev, "VBT signature missing\n");
+			pci_unmap_rom(pdev, bios);
+			return -1;
+		}
+		bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
 	}
 
-	bdb = (struct bdb_header *)(bios + i + vbt->bdb_offset);
-
-	/* Grab useful general definitions */
+	/* Grab useful general dxefinitions */
 	parse_general_features(dev_priv, bdb);
 	parse_driver_features(dev_priv, bdb);
 	parse_lfp_panel_data(dev_priv, bdb);
 	parse_sdvo_panel_data(dev_priv, bdb);
+	parse_sdvo_device_mapping(dev_priv, bdb);
+	parse_device_mapping(dev_priv, bdb);
 	parse_backlight_data(dev_priv, bdb);
 
-	pci_unmap_rom(pdev, bios);
+	if (bios)
+		pci_unmap_rom(pdev, bios);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/gma500/intel_bios.h b/drivers/gpu/drm/gma500/intel_bios.h
index c67979e..0a73866 100644
--- a/drivers/gpu/drm/gma500/intel_bios.h
+++ b/drivers/gpu/drm/gma500/intel_bios.h
@@ -127,9 +127,93 @@ struct bdb_general_features {
 	/* bits 5 */
 	u8 int_crt_support:1;
 	u8 int_tv_support:1;
-	u8 rsvd11:6; /* finish byte */
+	u8 int_efp_support:1;
+	u8 dp_ssc_enb:1;	/* PCH attached eDP supports SSC */
+	u8 dp_ssc_freq:1;	/* SSC freq for PCH attached eDP */
+	u8 rsvd11:3; /* finish byte */
 } __attribute__((packed));
 
+/* pre-915 */
+#define GPIO_PIN_DVI_LVDS	0x03 /* "DVI/LVDS DDC GPIO pins" */
+#define GPIO_PIN_ADD_I2C	0x05 /* "ADDCARD I2C GPIO pins" */
+#define GPIO_PIN_ADD_DDC	0x04 /* "ADDCARD DDC GPIO pins" */
+#define GPIO_PIN_ADD_DDC_I2C	0x06 /* "ADDCARD DDC/I2C GPIO pins" */
+
+/* Pre 915 */
+#define DEVICE_TYPE_NONE	0x00
+#define DEVICE_TYPE_CRT		0x01
+#define DEVICE_TYPE_TV		0x09
+#define DEVICE_TYPE_EFP		0x12
+#define DEVICE_TYPE_LFP		0x22
+/* On 915+ */
+#define DEVICE_TYPE_CRT_DPMS		0x6001
+#define DEVICE_TYPE_CRT_DPMS_HOTPLUG	0x4001
+#define DEVICE_TYPE_TV_COMPOSITE	0x0209
+#define DEVICE_TYPE_TV_MACROVISION	0x0289
+#define DEVICE_TYPE_TV_RF_COMPOSITE	0x020c
+#define DEVICE_TYPE_TV_SVIDEO_COMPOSITE	0x0609
+#define DEVICE_TYPE_TV_SCART		0x0209
+#define DEVICE_TYPE_TV_CODEC_HOTPLUG_PWR 0x6009
+#define DEVICE_TYPE_EFP_HOTPLUG_PWR	0x6012
+#define DEVICE_TYPE_EFP_DVI_HOTPLUG_PWR	0x6052
+#define DEVICE_TYPE_EFP_DVI_I		0x6053
+#define DEVICE_TYPE_EFP_DVI_D_DUAL	0x6152
+#define DEVICE_TYPE_EFP_DVI_D_HDCP	0x60d2
+#define DEVICE_TYPE_OPENLDI_HOTPLUG_PWR	0x6062
+#define DEVICE_TYPE_OPENLDI_DUALPIX	0x6162
+#define DEVICE_TYPE_LFP_PANELLINK	0x5012
+#define DEVICE_TYPE_LFP_CMOS_PWR	0x5042
+#define DEVICE_TYPE_LFP_LVDS_PWR	0x5062
+#define DEVICE_TYPE_LFP_LVDS_DUAL	0x5162
+#define DEVICE_TYPE_LFP_LVDS_DUAL_HDCP	0x51e2
+
+#define DEVICE_CFG_NONE		0x00
+#define DEVICE_CFG_12BIT_DVOB	0x01
+#define DEVICE_CFG_12BIT_DVOC	0x02
+#define DEVICE_CFG_24BIT_DVOBC	0x09
+#define DEVICE_CFG_24BIT_DVOCB	0x0a
+#define DEVICE_CFG_DUAL_DVOB	0x11
+#define DEVICE_CFG_DUAL_DVOC	0x12
+#define DEVICE_CFG_DUAL_DVOBC	0x13
+#define DEVICE_CFG_DUAL_LINK_DVOBC	0x19
+#define DEVICE_CFG_DUAL_LINK_DVOCB	0x1a
+
+#define DEVICE_WIRE_NONE	0x00
+#define DEVICE_WIRE_DVOB	0x01
+#define DEVICE_WIRE_DVOC	0x02
+#define DEVICE_WIRE_DVOBC	0x03
+#define DEVICE_WIRE_DVOBB	0x05
+#define DEVICE_WIRE_DVOCC	0x06
+#define DEVICE_WIRE_DVOB_MASTER 0x0d
+#define DEVICE_WIRE_DVOC_MASTER 0x0e
+
+#define DEVICE_PORT_DVOA	0x00 /* none on 845+ */
+#define DEVICE_PORT_DVOB	0x01
+#define DEVICE_PORT_DVOC	0x02
+
+struct child_device_config {
+	u16 handle;
+	u16 device_type;
+	u8  device_id[10]; /* ascii string */
+	u16 addin_offset;
+	u8  dvo_port; /* See Device_PORT_* above */
+	u8  i2c_pin;
+	u8  slave_addr;
+	u8  ddc_pin;
+	u16 edid_ptr;
+	u8  dvo_cfg; /* See DEVICE_CFG_* above */
+	u8  dvo2_port;
+	u8  i2c2_pin;
+	u8  slave2_addr;
+	u8  ddc2_pin;
+	u8  capabilities;
+	u8  dvo_wiring;/* See DEVICE_WIRE_* above */
+	u8  dvo2_wiring;
+	u16 extended_type;
+	u8  dvo_function;
+} __attribute__((packed));
+
+
 struct bdb_general_definitions {
 	/* DDC GPIO */
 	u8 crt_ddc_gmbus_pin;
@@ -144,13 +228,18 @@ struct bdb_general_definitions {
 	u8 boot_display[2];
 	u8 child_dev_size;
 
-	/* device info */
-	u8 tv_or_lvds_info[33];
-	u8 dev1[33];
-	u8 dev2[33];
-	u8 dev3[33];
-	u8 dev4[33];
-	/* may be another device block here on some platforms */
+	/*
+	 * Device info:
+	 * If TV is present, it'll be at devices[0].
+	 * LVDS will be next, either devices[0] or [1], if present.
+	 * On some platforms the number of device is 6. But could be as few as
+	 * 4 if both TV and LVDS are missing.
+	 * And the device num is related with the size of general definition
+	 * block. It is obtained by using the following formula:
+	 * number = (block_size - sizeof(bdb_general_definitions))/
+	 *	     sizeof(child_device_config);
+	 */
+	struct child_device_config devices[0];
 };
 
 struct bdb_lvds_options {
@@ -466,4 +555,21 @@ extern void psb_intel_destroy_bios(struct drm_device *dev);
 #define   SWF14_APM_STANDBY	0x1
 #define   SWF14_APM_RESTORE	0x0
 
+/* Add the device class for LFP, TV, HDMI */
+#define	 DEVICE_TYPE_INT_LFP	0x1022
+#define	 DEVICE_TYPE_INT_TV	0x1009
+#define	 DEVICE_TYPE_HDMI	0x60D2
+#define	 DEVICE_TYPE_DP		0x68C6
+#define	 DEVICE_TYPE_eDP	0x78C6
+
+/* define the DVO port for HDMI output type */
+#define		DVO_B		1
+#define		DVO_C		2
+#define		DVO_D		3
+
+/* define the PORT for DP output type */
+#define		PORT_IDPB	7
+#define		PORT_IDPC	8
+#define		PORT_IDPD	9
+
 #endif /* _I830_BIOS_H_ */
diff --git a/drivers/gpu/drm/gma500/intel_opregion.c b/drivers/gpu/drm/gma500/intel_opregion.c
index d946bc1..7041f40 100644
--- a/drivers/gpu/drm/gma500/intel_opregion.c
+++ b/drivers/gpu/drm/gma500/intel_opregion.c
@@ -25,6 +25,22 @@
 
 #include "psb_drv.h"
 
+#define PCI_ASLE 0xe4
+#define PCI_ASLS 0xfc
+
+#define OPREGION_HEADER_OFFSET 0
+#define OPREGION_ACPI_OFFSET   0x100
+#define   ACPI_CLID 0x01ac /* current lid state indicator */
+#define   ACPI_CDCK 0x01b0 /* current docking state indicator */
+#define OPREGION_SWSCI_OFFSET  0x200
+#define OPREGION_ASLE_OFFSET   0x300
+#define OPREGION_VBT_OFFSET    0x400
+
+#define OPREGION_SIGNATURE "IntelGraphicsMem"
+#define MBOX_ACPI      (1<<0)
+#define MBOX_SWSCI     (1<<1)
+#define MBOX_ASLE      (1<<2)
+
 struct opregion_header {
 	u8 signature[16];
 	u32 size;
@@ -36,21 +52,94 @@ struct opregion_header {
 	u8 reserved[164];
 } __packed;
 
-struct opregion_apci {
-	/*FIXME: add it later*/
-} __packed;
+/* OpRegion mailbox #1: public ACPI methods */
+struct opregion_acpi {
+	u32 drdy;       /* driver readiness */
+	u32 csts;       /* notification status */
+	u32 cevt;       /* current event */
+	u8 rsvd1[20];
+	u32 didl[8];    /* supported display devices ID list */
+	u32 cpdl[8];    /* currently presented display list */
+	u32 cadl[8];    /* currently active display list */
+	u32 nadl[8];    /* next active devices list */
+	u32 aslp;       /* ASL sleep time-out */
+	u32 tidx;       /* toggle table index */
+	u32 chpd;       /* current hotplug enable indicator */
+	u32 clid;       /* current lid state*/
+	u32 cdck;       /* current docking state */
+	u32 sxsw;       /* Sx state resume */
+	u32 evts;       /* ASL supported events */
+	u32 cnot;       /* current OS notification */
+	u32 nrdy;       /* driver status */
+	u8 rsvd2[60];
+} __attribute__((packed));
 
+/* OpRegion mailbox #2: SWSCI */
 struct opregion_swsci {
-	/*FIXME: add it later*/
-} __packed;
+	u32 scic;       /* SWSCI command|status|data */
+	u32 parm;       /* command parameters */
+	u32 dslp;       /* driver sleep time-out */
+	u8 rsvd[244];
+} __attribute__((packed));
 
-struct opregion_acpi {
-	/*FIXME: add it later*/
-} __packed;
+/* OpRegion mailbox #3: ASLE */
+struct opregion_asle {
+	u32 ardy;       /* driver readiness */
+	u32 aslc;       /* ASLE interrupt command */
+	u32 tche;       /* technology enabled indicator */
+	u32 alsi;       /* current ALS illuminance reading */
+	u32 bclp;       /* backlight brightness to set */
+	u32 pfit;       /* panel fitting state */
+	u32 cblv;       /* current brightness level */
+	u16 bclm[20];   /* backlight level duty cycle mapping table */
+	u32 cpfm;       /* current panel fitting mode */
+	u32 epfm;       /* enabled panel fitting modes */
+	u8 plut[74];    /* panel LUT and identifier */
+	u32 pfmb;       /* PWM freq and min brightness */
+	u8 rsvd[102];
+} __attribute__((packed));
+
+/* ASLE irq request bits */
+#define ASLE_SET_ALS_ILLUM     (1 << 0)
+#define ASLE_SET_BACKLIGHT     (1 << 1)
+#define ASLE_SET_PFIT          (1 << 2)
+#define ASLE_SET_PWM_FREQ      (1 << 3)
+#define ASLE_REQ_MSK           0xf
+
+/* response bits of ASLE irq request */
+#define ASLE_ALS_ILLUM_FAILED	(1<<10)
+#define ASLE_BACKLIGHT_FAILED	(1<<12)
+#define ASLE_PFIT_FAILED	(1<<14)
+#define ASLE_PWM_FREQ_FAILED	(1<<16)
+
+/* ASLE backlight brightness to set */
+#define ASLE_BCLP_VALID                (1<<31)
+#define ASLE_BCLP_MSK          (~(1<<31))
+
+/* ASLE panel fitting request */
+#define ASLE_PFIT_VALID         (1<<31)
+#define ASLE_PFIT_CENTER (1<<0)
+#define ASLE_PFIT_STRETCH_TEXT (1<<1)
+#define ASLE_PFIT_STRETCH_GFX (1<<2)
+
+/* PWM frequency and minimum brightness */
+#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
+#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
+#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
+#define ASLE_PFMB_PWM_VALID (1<<31)
+
+#define ASLE_CBLV_VALID         (1<<31)
+
+#define ACPI_OTHER_OUTPUT (0<<8)
+#define ACPI_VGA_OUTPUT (1<<8)
+#define ACPI_TV_OUTPUT (2<<8)
+#define ACPI_DIGITAL_OUTPUT (3<<8)
+#define ACPI_LVDS_OUTPUT (4<<8)
 
 int gma_intel_opregion_init(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_opregion *opregion = &dev_priv->opregion;
 	u32 opregion_phy;
 	void *base;
 	u32 *lid_state;
@@ -64,18 +153,26 @@ int gma_intel_opregion_init(struct drm_device *dev)
 	base = ioremap(opregion_phy, 8*1024);
 	if (!base)
 		return -ENOMEM;
+	/* FIXME: should use _io ops - ditto on i915 */
+	if (memcmp(base, OPREGION_SIGNATURE, 16)) {
+		DRM_ERROR("opregion signature mismatch\n");
+		iounmap(base);
+		return -EINVAL;
+	}
 
 	lid_state = base + 0x01ac;
 
 	dev_priv->lid_state = lid_state;
 	dev_priv->lid_last_state = readl(lid_state);
+	opregion->header = base;
+	opregion->vbt = base + OPREGION_VBT_OFFSET;
 	return 0;
 }
 
 int gma_intel_opregion_exit(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
-	if (dev_priv->lid_state)
-		iounmap(dev_priv->lid_state);
+	if (dev_priv->opregion.header)
+		iounmap(dev_priv->opregion.header);
 	return 0;
 }
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 4c50969..64de248 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -257,6 +257,7 @@ struct psb_intel_opregion {
 	struct opregion_acpi *acpi;
 	struct opregion_swsci *swsci;
 	struct opregion_asle *asle;
+	void *vbt;
 	int enabled;
 };
 
@@ -494,6 +495,9 @@ struct psb_ops;
 struct drm_psb_private {
 	struct drm_device *dev;
 	const struct psb_ops *ops;
+	
+	struct child_device_config *child_dev;
+	int child_dev_num;
 
 	struct psb_gtt gtt;

[PATCH 06/12] gma500: panel presence check

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Introduce a panel presence check for Cedartrail. Non netbook devices don't
necessarily have a panel attached.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_intel_lvds.c |   57 +++++++++++++++++++++++++++++++
 1 files changed, 57 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index 8359c1a..c87b179 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -556,6 +556,56 @@ const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
 	.destroy = cdv_intel_lvds_enc_destroy,
 };
 
+/*
+ * Enumerate the child dev array parsed from VBT to check whether
+ * the LVDS is present.
+ * If it is present, return 1.
+ * If it is not present, return false.
+ * If no child dev is parsed from VBT, it assumes that the LVDS is present.
+ */
+static bool lvds_is_present_in_vbt(struct drm_device *dev,
+				   u8 *i2c_pin)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int i;
+
+	if (!dev_priv->child_dev_num)
+		return true;
+
+	for (i = 0; i < dev_priv->child_dev_num; i++) {
+		struct child_device_config *child = dev_priv->child_dev + i;
+
+		/* If the device type is not LFP, continue.
+		 * We have to check both the new identifiers as well as the
+		 * old for compatibility with some BIOSes.
+		 */
+		if (child->device_type != DEVICE_TYPE_INT_LFP &&
+		    child->device_type != DEVICE_TYPE_LFP)
+			continue;
+
+		if (child->i2c_pin)
+		    *i2c_pin = child->i2c_pin;
+
+		/* However, we cannot trust the BIOS writers to populate
+		 * the VBT correctly.  Since LVDS requires additional
+		 * information from AIM blocks, a non-zero addin offset is
+		 * a good indicator that the LVDS is actually present.
+		 */
+		if (child->addin_offset)
+			return true;
+
+		/* But even then some BIOS writers perform some black magic
+		 * and instantiate the device without reference to any
+		 * additional data.  Trust that if the VBT was written into
+		 * the OpRegion then they have validated the LVDS's existence.
+		 */
+		if (dev_priv->opregion.vbt)
+			return true;
+	}
+
+	return false;
+}
+
 /**
  * cdv_intel_lvds_init - setup LVDS connectors on this device
  * @dev: drm device
@@ -576,6 +626,13 @@ void cdv_intel_lvds_init(struct drm_device *dev,
 	struct drm_psb_private *dev_priv = dev->dev_private;
 	u32 lvds;
 	int pipe;
+	u8 pin;
+
+	pin = GMBUS_PORT_PANEL;
+	if (!lvds_is_present_in_vbt(dev, &pin)) {
+		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
+		return;
+	}
 
 	psb_intel_encoder = kzalloc(sizeof(struct psb_intel_encoder),
 				    GFP_KERNEL);

[PATCH 07/12] gma500: support 1080p

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

The problem in console mode is lack of linear memory. We can solve that by
dropping to 16bpp. The mode setting X server will allocate its own GEM
framebuffer in 32bpp and all will be well.

We could just do 16bpp anyway but that would be a regression on the lower
modes as many distributions don't yet ship the generic mode setting KMS
drivers.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_intel_crt.c  |    6 ------
 drivers/gpu/drm/gma500/cdv_intel_hdmi.c |    7 -------
 drivers/gpu/drm/gma500/framebuffer.c    |   16 ++++++++++++++++
 drivers/gpu/drm/gma500/oaktrail_hdmi.c  |    6 ------
 drivers/gpu/drm/gma500/psb_intel_sdvo.c |    6 ------
 5 files changed, 16 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
index a71a6cd..1de27c7 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_crt.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -67,7 +67,6 @@ static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
 static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
-	struct drm_psb_private *dev_priv = connector->dev->dev_private;
 	int max_clock = 0;
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
@@ -84,11 +83,6 @@ static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
 	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
 		return MODE_PANEL;
 
-	/* We assume worst case scenario of 32 bpp here, since we don't know */
-	if ((ALIGN(mode->hdisplay * 4, 64) * mode->vdisplay) >
-	    dev_priv->vram_stolen_size)
-		return MODE_MEM;
-
 	return MODE_OK;
 }
 
diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
index 8d52695..88b59d4 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
@@ -242,8 +242,6 @@ static int cdv_hdmi_get_modes(struct drm_connector *connector)
 static int cdv_hdmi_mode_valid(struct drm_connector *connector,
 				 struct drm_display_mode *mode)
 {
-	struct drm_psb_private *dev_priv = connector->dev->dev_private;
-
 	if (mode->clock > 165000)
 		return MODE_CLOCK_HIGH;
 	if (mode->clock < 20000)
@@ -257,11 +255,6 @@ static int cdv_hdmi_mode_valid(struct drm_connector *connector,
 	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 		return MODE_NO_INTERLACE;
 
-	/* We assume worst case scenario of 32 bpp here, since we don't know */
-	if ((ALIGN(mode->hdisplay * 4, 64) * mode->vdisplay) >
-	    dev_priv->vram_stolen_size)
-		return MODE_MEM;
-
 	return MODE_OK;
 }
 
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index 8ea202f..c2cf6bf 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -543,9 +543,25 @@ static int psbfb_probe(struct drm_fb_helper *helper,
 				struct drm_fb_helper_surface_size *sizes)
 {
 	struct psb_fbdev *psb_fbdev = (struct psb_fbdev *)helper;
+	struct drm_device *dev = psb_fbdev->psb_fb_helper.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
 	int new_fb = 0;
+	int bytespp;
 	int ret;
 
+	bytespp = sizes->surface_bpp / 8;
+	if (bytespp == 3)	/* no 24bit packed */
+		bytespp = 4;
+
+	/* If the mode will not fit in 32bit then switch to 16bit to get
+	   a console on full resolution. The X mode setting server will
+	   allocate its own 32bit GEM framebuffer */
+	if (ALIGN(sizes->fb_width * bytespp, 64) * sizes->fb_height >
+	                dev_priv->vram_stolen_size) {
+                sizes->surface_bpp = 16;
+                sizes->surface_depth = 16;
+        }
+
 	if (!helper->fb) {
 		ret = psbfb_create(psb_fbdev, sizes);
 		if (ret)
diff --git a/drivers/gpu/drm/gma500/oaktrail_hdmi.c b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
index f8b367b..2595660 100644
--- a/drivers/gpu/drm/gma500/oaktrail_hdmi.c
+++ b/drivers/gpu/drm/gma500/oaktrail_hdmi.c
@@ -179,7 +179,6 @@ static void oaktrail_hdmi_dpms(struct drm_encoder *encoder, int mode)
 static int oaktrail_hdmi_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
-	struct drm_psb_private *dev_priv = connector->dev->dev_private;
 	if (mode->clock > 165000)
 		return MODE_CLOCK_HIGH;
 	if (mode->clock < 20000)
@@ -188,11 +187,6 @@ static int oaktrail_hdmi_mode_valid(struct drm_connector *connector,
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
-	/* We assume worst case scenario of 32 bpp here, since we don't know */
-	if ((ALIGN(mode->hdisplay * 4, 64) * mode->vdisplay) >
-	    dev_priv->vram_stolen_size)
-		return MODE_MEM;
-
 	return MODE_OK;
 }
 
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index 36330ca..958b4e2 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -1141,7 +1141,6 @@ static void psb_intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
 static int psb_intel_sdvo_mode_valid(struct drm_connector *connector,
 				 struct drm_display_mode *mode)
 {
-	struct drm_psb_private *dev_priv = connector->dev->dev_private;
 	struct psb_intel_sdvo *psb_intel_sdvo = intel_attached_sdvo(connector);
 
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
@@ -1161,11 +1160,6 @@ static int psb_intel_sdvo_mode_valid(struct drm_connector *connector,
 			return MODE_PANEL;
 	}
 
-	/* We assume worst case scenario of 32 bpp here, since we don't know */
-	if ((ALIGN(mode->hdisplay * 4, 64) * mode->vdisplay) >
-	    dev_priv->vram_stolen_size)
-		return MODE_MEM;
-
 	return MODE_OK;
 }

[PATCH 08/12] gma500: Clean up weirdness in the cdv mode test code

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_intel_crt.c |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
index 1de27c7..1a82843 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_crt.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -67,7 +67,6 @@ static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
 static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
 				struct drm_display_mode *mode)
 {
-	int max_clock = 0;
 	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return MODE_NO_DBLESCAN;
 
@@ -76,8 +75,7 @@ static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
 		return MODE_CLOCK_LOW;
 
 	/* The max clock for CDV is 355 instead of 400 */
-	max_clock = 355000;
-	if (mode->clock > max_clock)
+	if (mode->clock > 355000)
 		return MODE_CLOCK_HIGH;
 
 	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)

[PATCH 09/12] cdv: continue synching up with updated reference code

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.

This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_device.c        |   20 +++++++++
 drivers/gpu/drm/gma500/cdv_intel_crt.c     |   20 +++------
 drivers/gpu/drm/gma500/cdv_intel_display.c |   61 ++++++++++++----------------
 drivers/gpu/drm/gma500/cdv_intel_lvds.c    |   17 ++++++++
 drivers/gpu/drm/gma500/framebuffer.c       |   13 ++----
 drivers/gpu/drm/gma500/mdfld_device.c      |    2 +
 drivers/gpu/drm/gma500/oaktrail_device.c   |    2 +
 drivers/gpu/drm/gma500/psb_device.c        |    2 +
 drivers/gpu/drm/gma500/psb_drv.h           |    4 ++
 drivers/gpu/drm/gma500/psb_intel_reg.h     |    4 ++
 10 files changed, 89 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
index a54cc73..5cc06a8 100644
--- a/drivers/gpu/drm/gma500/cdv_device.c
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -49,6 +49,9 @@ static void cdv_disable_vga(struct drm_device *dev)
 static int cdv_output_init(struct drm_device *dev)
 {
 	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	drm_mode_create_scaling_mode_property(dev);
+
 	cdv_disable_vga(dev);
 
 	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
@@ -238,6 +241,18 @@ static void cdv_init_pm(struct drm_device *dev)
 	dev_err(dev->dev, "GPU: power management timed out.\n");
 }
 
+static void cdv_errata(struct drm_device *dev)
+{
+	/* Disable bonus launch.
+	 *	CPU and GPU competes for memory and display misses updates and flickers.
+	 *	Worst with dual core, dual displays.
+	 *
+	 *	Fixes were done to Win 7 gfx driver to disable a feature called Bonus
+	 *	Launch to work around the issue, by degrading performance.
+	 */
+	 CDV_MSG_WRITE32(3, 0x30, 0x08027108);
+}
+
 /**
  *	cdv_save_display_registers	-	save registers lost on suspend
  *	@dev: our DRM device
@@ -355,7 +370,7 @@ static int cdv_restore_display_registers(struct drm_device *dev)
 	REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR);
 
 	/* Fix arbitration bug */
-	CDV_MSG_WRITE32(3, 0x30, 0x08027108);
+	cdv_errata(dev);
 
 	drm_mode_config_reset(dev);
 
@@ -464,8 +479,11 @@ const struct psb_ops cdv_chip_ops = {
 	.accel_2d = 0,
 	.pipes = 2,
 	.crtcs = 2,
+	.hdmi_mask = (1 << 0) | (1 << 1),
+	.lvds_mask = (1 << 1),
 	.sgx_offset = MRST_SGX_OFFSET,
 	.chip_setup = cdv_chip_setup,
+	.errata = cdv_errata,
 
 	.crtc_helper = &cdv_intel_helper_funcs,
 	.crtc_funcs = &cdv_intel_crtc_funcs,
diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
index 1a82843..1874220 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_crt.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
@@ -78,9 +78,6 @@ static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
 	if (mode->clock > 355000)
 		return MODE_CLOCK_HIGH;
 
-	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
-		return MODE_PANEL;
-
 	return MODE_OK;
 }
 
@@ -148,13 +145,7 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
 	struct drm_device *dev = connector->dev;
 	u32 hotplug_en;
 	int i, tries = 0, ret = false;
-	u32 adpa_orig;
-
-	/* disable the DAC when doing the hotplug detection */
-
-	adpa_orig = REG_READ(ADPA);
-
-	REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
+	u32 orig;
 
 	/*
 	 * On a CDV thep, CRT detect sequence need to be done twice
@@ -162,7 +153,7 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
 	 */
 	tries = 2;
 
-	hotplug_en = REG_READ(PORT_HOTPLUG_EN);
+	orig = hotplug_en = REG_READ(PORT_HOTPLUG_EN);
 	hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
 	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 
@@ -187,8 +178,11 @@ static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
 	    CRT_HOTPLUG_MONITOR_NONE)
 		ret = true;
 
-	/* Restore the saved ADPA */
-	REG_WRITE(ADPA, adpa_orig);
+	 /* clear the interrupt we just generated, if any */
+	REG_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
+
+	/* and put the bits back */
+	REG_WRITE(PORT_HOTPLUG_EN, orig);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c
index 07b37f5..2fab778 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_display.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_display.c
@@ -226,13 +226,13 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 	int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
 	int ref_sfr = (pipe == 0) ? SB_REF_DPLLA : SB_REF_DPLLB;
 	u32 ref_value;
+	u32 lane_reg, lane_value;
 
 	cdv_sb_reset(dev);
 
-	if ((REG_READ(dpll_reg) & DPLL_SYNCLOCK_ENABLE) == 0) {
-		DRM_ERROR("Attempting to set DPLL with refclk disabled\n");
-		return -EBUSY;
-	}
+	REG_WRITE(dpll_reg, DPLL_SYNCLOCK_ENABLE | DPLL_VGA_MODE_DIS);
+
+	udelay(100);
 
 	/* Follow the BIOS and write the REF/SFR Register. Hardcoded value */
 	ref_value = 0x68A701;
@@ -337,36 +337,29 @@ cdv_dpll_set_clock_cdv(struct drm_device *dev, struct drm_crtc *crtc,
 	if (ret)
 		return ret;
 
-	/* always Program the Lane Register for the Pipe A*/
-/* 	if (pipe == 0) */ {
-		/* Program the Lane0/1 for HDMI B */
-		u32 lane_reg, lane_value;
-
-		lane_reg = PSB_LANE0;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-
-		lane_reg = PSB_LANE1;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-
-		/* Program the Lane2/3 for HDMI C */
-		lane_reg = PSB_LANE2;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-
-		lane_reg = PSB_LANE3;
-		cdv_sb_read(dev, lane_reg, &lane_value);
-		lane_value &= ~(LANE_PLL_MASK);
-		lane_value |= LANE_PLL_ENABLE;
-		cdv_sb_write(dev, lane_reg, lane_value);
-	}
+	lane_reg = PSB_LANE0;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
+
+	lane_reg = PSB_LANE1;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
+
+	lane_reg = PSB_LANE2;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
+
+	lane_reg = PSB_LANE3;
+	cdv_sb_read(dev, lane_reg, &lane_value);
+	lane_value &= ~(LANE_PLL_MASK);
+	lane_value |= LANE_PLL_ENABLE | LANE_PLL_PIPE(pipe);
+	cdv_sb_write(dev, lane_reg, lane_value);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/gma500/cdv_intel_lvds.c b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
index c87b179..44a8353 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_lvds.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_lvds.c
@@ -356,6 +356,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(
+							encoder->crtc);
 	u32 pfit_control;
 
 	/*
@@ -377,6 +379,8 @@ static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
 	else
 		pfit_control = 0;
 
+	pfit_control |= psb_intel_crtc->pipe << PFIT_PIPE_SHIFT;
+
 	if (dev_priv->lvds_dither)
 		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
 
@@ -767,6 +771,19 @@ void cdv_intel_lvds_init(struct drm_device *dev,
 		goto failed_find;
 	}
 
+	/* setup PWM */
+	{
+		u32 pwm;
+
+		pwm = REG_READ(BLC_PWM_CTL2);
+		if (pipe == 1)
+			pwm |= PWM_PIPE_B;
+		else
+			pwm &= ~PWM_PIPE_B;
+		pwm |= PWM_ENABLE;
+		REG_WRITE(BLC_PWM_CTL2, pwm);
+	}
+
 out:
 	drm_sysfs_connector_add(connector);
 	return;
diff --git a/drivers/gpu/drm/gma500/framebuffer.c b/drivers/gpu/drm/gma500/framebuffer.c
index c2cf6bf..c9fe4bd 100644
--- a/drivers/gpu/drm/gma500/framebuffer.c
+++ b/drivers/gpu/drm/gma500/framebuffer.c
@@ -748,10 +748,7 @@ static void psb_setup_outputs(struct drm_device *dev)
 			clone_mask = (1 << INTEL_OUTPUT_SDVO);
 			break;
 		case INTEL_OUTPUT_LVDS:
-			if (IS_MRST(dev))
-				crtc_mask = (1 << 0);
-			else
-				crtc_mask = (1 << 1);
+		        crtc_mask = dev_priv->ops->lvds_mask;
 			clone_mask = (1 << INTEL_OUTPUT_LVDS);
 			break;
 		case INTEL_OUTPUT_MIPI:
@@ -763,10 +760,7 @@ static void psb_setup_outputs(struct drm_device *dev)
 			clone_mask = (1 << INTEL_OUTPUT_MIPI2);
 			break;
 		case INTEL_OUTPUT_HDMI:
-			if (IS_MFLD(dev))
-				crtc_mask = (1 << 1);
-			else	
-				crtc_mask = (1 << 0);
+		        crtc_mask = dev_priv->ops->hdmi_mask;
 			clone_mask = (1 << INTEL_OUTPUT_HDMI);
 			break;
 		}
@@ -802,6 +796,9 @@ void psb_modeset_init(struct drm_device *dev)
 	dev->mode_config.max_height = 2048;
 
 	psb_setup_outputs(dev);
+
+	if (dev_priv->ops->errata)
+	        dev_priv->ops->errata(dev);
 }
 
 void psb_modeset_cleanup(struct drm_device *dev)
diff --git a/drivers/gpu/drm/gma500/mdfld_device.c b/drivers/gpu/drm/gma500/mdfld_device.c
index af65678..a0bd48c 100644
--- a/drivers/gpu/drm/gma500/mdfld_device.c
+++ b/drivers/gpu/drm/gma500/mdfld_device.c
@@ -672,6 +672,8 @@ const struct psb_ops mdfld_chip_ops = {
 	.accel_2d = 0,
 	.pipes = 3,
 	.crtcs = 3,
+	.lvds_mask = (1 << 1);
+	.hdmi_mask = (1 << 1);
 	.sgx_offset = MRST_SGX_OFFSET,
 
 	.chip_setup = mid_chip_setup,
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 41d1924..4c5a186 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -487,6 +487,8 @@ const struct psb_ops oaktrail_chip_ops = {
 	.accel_2d = 1,
 	.pipes = 2,
 	.crtcs = 2,
+	.hdmi_mask = (1 << 0),
+	.lvds_mask = (1 << 0),
 	.sgx_offset = MRST_SGX_OFFSET,
 
 	.chip_setup = oaktrail_chip_setup,
diff --git a/drivers/gpu/drm/gma500/psb_device.c b/drivers/gpu/drm/gma500/psb_device.c
index 95d163e..34e6866 100644
--- a/drivers/gpu/drm/gma500/psb_device.c
+++ b/drivers/gpu/drm/gma500/psb_device.c
@@ -308,6 +308,8 @@ const struct psb_ops psb_chip_ops = {
 	.accel_2d = 1,
 	.pipes = 2,
 	.crtcs = 2,
+	.hdmi_mask = (1 << 0),
+	.lvds_mask = (1 << 1),
 	.sgx_offset = PSB_SGX_OFFSET,
 	.chip_setup = psb_chip_setup,
 	.chip_teardown = psb_chip_teardown,
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 64de248..6235499 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -688,6 +688,8 @@ struct psb_ops {
 	int pipes;		/* Number of output pipes */
 	int crtcs;		/* Number of CRTCs */
 	int sgx_offset;		/* Base offset of SGX device */
+	int hdmi_mask;		/* Mask of HDMI CRTCs */
+	int lvds_mask;		/* Mask of LVDS CRTCs */
 
 	/* Sub functions */
 	struct drm_crtc_helper_funcs const *crtc_helper;
@@ -696,6 +698,8 @@ struct psb_ops {
 	/* Setup hooks */
 	int (*chip_setup)(struct drm_device *dev);
 	void (*chip_teardown)(struct drm_device *dev);
+	/* Optional helper caller after modeset */
+	void (*errata)(struct drm_device *dev);
 
 	/* Display management hooks */
 	int (*output_init)(struct drm_device *dev);
diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h
index 46792fc..cbd8aee 100644
--- a/drivers/gpu/drm/gma500/psb_intel_reg.h
+++ b/drivers/gpu/drm/gma500/psb_intel_reg.h
@@ -91,6 +91,9 @@
 
 #define BLC_PWM_CTL		0x61254
 #define BLC_PWM_CTL2		0x61250
+#define  PWM_ENABLE		(1 << 31)
+#define  PWM_LEGACY_MODE	(1 << 30)
+#define  PWM_PIPE_B		(1 << 29)
 #define BLC_PWM_CTL_C		0x62254
 #define BLC_PWM_CTL2_C		0x62250
 #define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
@@ -1338,6 +1341,7 @@ No status bits are changed.
 
 #define LANE_PLL_MASK		(0x7 << 20)
 #define LANE_PLL_ENABLE		(0x3 << 20)
+#define LANE_PLL_PIPE(p)	(((p) == 0) ? (1 << 21) : (0 << 21))
 
 
 #endif

[PATCH 10/12] gma500: Add ops for hotplug support.

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

This provides the needed callback hooks to add hotplug display support to
the GMA36x0 devices. 

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/psb_drv.h |    3 +++
 drivers/gpu/drm/gma500/psb_irq.c |   30 +++++++++++++++++++++++-------
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 6235499..ab483c3 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -130,6 +130,7 @@ enum {
 #define _PSB_VSYNC_PIPEA_FLAG	  (1<<7)
 #define _MDFLD_MIPIA_FLAG	  (1<<16)
 #define _MDFLD_MIPIC_FLAG	  (1<<17)
+#define _PSB_IRQ_DISP_HOTSYNC	  (1<<17)
 #define _PSB_IRQ_SGX_FLAG	  (1<<18)
 #define _PSB_IRQ_MSVDX_FLAG	  (1<<19)
 #define _LNC_IRQ_TOPAZ_FLAG	  (1<<20)
@@ -703,6 +704,8 @@ struct psb_ops {
 
 	/* Display management hooks */
 	int (*output_init)(struct drm_device *dev);
+	int (*hotplug)(struct drm_device *dev);
+	void (*hotplug_enable)(struct drm_device *dev, bool on);
 	/* Power management hooks */
 	void (*init_pm)(struct drm_device *dev);
 	int (*save_regs)(struct drm_device *dev);
diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c
index 1869586..2fcdffd 100644
--- a/drivers/gpu/drm/gma500/psb_irq.c
+++ b/drivers/gpu/drm/gma500/psb_irq.c
@@ -199,11 +199,9 @@ static void psb_vdc_interrupt(struct drm_device *dev, uint32_t vdc_stat)
 
 irqreturn_t psb_irq_handler(DRM_IRQ_ARGS)
 {
-	struct drm_device *dev = (struct drm_device *) arg;
-	struct drm_psb_private *dev_priv =
-	    (struct drm_psb_private *) dev->dev_private;
-
-	uint32_t vdc_stat, dsp_int = 0, sgx_int = 0;
+	struct drm_device *dev = arg;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	uint32_t vdc_stat, dsp_int = 0, sgx_int = 0, hotplug_int = 0;
 	int handled = 0;
 
 	spin_lock(&dev_priv->irqmask_lock);
@@ -220,6 +218,8 @@ irqreturn_t psb_irq_handler(DRM_IRQ_ARGS)
 
 	if (vdc_stat & _PSB_IRQ_SGX_FLAG)
 		sgx_int = 1;
+	if (vdc_stat & _PSB_IRQ_DISP_HOTSYNC)
+		hotplug_int = 1;
 
 	vdc_stat &= dev_priv->vdc_irq_mask;
 	spin_unlock(&dev_priv->irqmask_lock);
@@ -241,6 +241,13 @@ irqreturn_t psb_irq_handler(DRM_IRQ_ARGS)
 		handled = 1;
 	}
 
+	/* Note: this bit has other meanings on some devices, so we will
+	   need to address that later if it ever matters */
+	if (hotplug_int && dev_priv->ops->hotplug) {
+		handled = dev_priv->ops->hotplug(dev);
+		REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
+	}
+
 	PSB_WVDC32(vdc_stat, PSB_INT_IDENTITY_R);
 	(void) PSB_RVDC32(PSB_INT_IDENTITY_R);
 	DRM_READMEMORYBARRIER();
@@ -273,6 +280,10 @@ void psb_irq_preinstall(struct drm_device *dev)
 		dev_priv->vdc_irq_mask |= _MDFLD_PIPEC_EVENT_FLAG;
 	*/
 
+	/* Revisit this area - want per device masks ? */
+	if (dev_priv->ops->hotplug)
+		dev_priv->vdc_irq_mask |= _PSB_IRQ_DISP_HOTSYNC;
+
 	/* This register is safe even if display island is off */
 	PSB_WVDC32(~dev_priv->vdc_irq_mask, PSB_INT_MASK_R);
 	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
@@ -305,18 +316,23 @@ int psb_irq_postinstall(struct drm_device *dev)
 	else
 		psb_disable_pipestat(dev_priv, 2, PIPE_VBLANK_INTERRUPT_ENABLE);
 
+	if (dev_priv->ops->hotplug_enable)
+		dev_priv->ops->hotplug_enable(dev, true);
+
 	spin_unlock_irqrestore(&dev_priv->irqmask_lock, irqflags);
 	return 0;
 }
 
 void psb_irq_uninstall(struct drm_device *dev)
 {
-	struct drm_psb_private *dev_priv =
-	    (struct drm_psb_private *) dev->dev_private;
+	struct drm_psb_private *dev_priv = dev->dev_private;
 	unsigned long irqflags;
 
 	spin_lock_irqsave(&dev_priv->irqmask_lock, irqflags);
 
+	if (dev_priv->ops->hotplug_enable)
+		dev_priv->ops->hotplug_enable(dev, false);
+
 	PSB_WVDC32(0xFFFFFFFF, PSB_HWSTAM);
 
 	if (dev->vblank_enabled[0])

[PATCH 11/12] gma500: Add the base elements of CDV hotplug support

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/cdv_device.c    |   41 ++++++++++++++++++++++++++++++--
 drivers/gpu/drm/gma500/psb_drv.h       |    5 ++++
 drivers/gpu/drm/gma500/psb_intel_reg.h |    5 +++-
 3 files changed, 48 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_device.c b/drivers/gpu/drm/gma500/cdv_device.c
index 5cc06a8..62f9b73 100644
--- a/drivers/gpu/drm/gma500/cdv_device.c
+++ b/drivers/gpu/drm/gma500/cdv_device.c
@@ -462,13 +462,48 @@ static void cdv_get_core_freq(struct drm_device *dev)
 	}
 }
 
+static void cdv_hotplug_work_func(struct work_struct *work)
+{
+        struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private,
+							hotplug_work);                 
+        struct drm_device *dev = dev_priv->dev;
+
+        /* Just fire off a uevent and let userspace tell us what to do */
+        drm_helper_hpd_irq_event(dev);
+}                       
+
+/* The core driver has received a hotplug IRQ. We are in IRQ context
+   so extract the needed information and kick off queued processing */
+   
+static int cdv_hotplug_event(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	schedule_work(&dev_priv->hotplug_work);
+	REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
+	return 1;
+}
+
+static void cdv_hotplug_enable(struct drm_device *dev, bool on)
+{
+	if (on) {
+		u32 hotplug = REG_READ(PORT_HOTPLUG_EN);
+		hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN |
+			   HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN;
+		REG_WRITE(PORT_HOTPLUG_EN, hotplug);
+	}  else {
+		REG_WRITE(PORT_HOTPLUG_EN, 0);
+		REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
+	}	
+}
+
 static int cdv_chip_setup(struct drm_device *dev)
 {
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func);
 	cdv_get_core_freq(dev);
 	gma_intel_opregion_init(dev);
 	psb_intel_init_bios(dev);
-	REG_WRITE(PORT_HOTPLUG_EN, 0);
-	REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
+	cdv_hotplug_enable(dev, false);
 	return 0;
 }
 
@@ -489,6 +524,8 @@ const struct psb_ops cdv_chip_ops = {
 	.crtc_funcs = &cdv_intel_crtc_funcs,
 
 	.output_init = cdv_output_init,
+	.hotplug = cdv_hotplug_event,
+	.hotplug_enable = cdv_hotplug_enable,
 
 #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
 	.backlight_init = cdv_backlight_init,
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index ab483c3..d3528a6 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -626,6 +626,11 @@ struct drm_psb_private {
 	uint32_t msi_addr;
 	uint32_t msi_data;
 
+	/*
+	 * Hotplug handling
+	 */
+
+	struct work_struct hotplug_work;
 
 	/*
 	 * LID-Switch
diff --git a/drivers/gpu/drm/gma500/psb_intel_reg.h b/drivers/gpu/drm/gma500/psb_intel_reg.h
index cbd8aee..519a9cd 100644
--- a/drivers/gpu/drm/gma500/psb_intel_reg.h
+++ b/drivers/gpu/drm/gma500/psb_intel_reg.h
@@ -219,7 +219,7 @@
 #define DPLLB_LVDS_P2_CLOCK_DIV_14	(0 << 24)	/* i915 */
 #define DPLLB_LVDS_P2_CLOCK_DIV_7	(1 << 24)	/* i915 */
 #define DPLL_P2_CLOCK_DIV_MASK		0x03000000	/* i915 */
-#define DPLL_FPA01_P1_POST_DIV_MASK	0x00ff0000	/* i915 */
+#define DPLL_FPA0h1_P1_POST_DIV_MASK	0x00ff0000	/* i915 */
 #define DPLL_LOCK			(1 << 15)	/* CDV */
 
 /*
@@ -346,6 +346,9 @@
 #define FP_M2_DIV_SHIFT			0
 
 #define PORT_HOTPLUG_EN		0x61110
+#define HDMIB_HOTPLUG_INT_EN		(1 << 29)
+#define HDMIC_HOTPLUG_INT_EN		(1 << 28)
+#define HDMID_HOTPLUG_INT_EN		(1 << 27)
 #define SDVOB_HOTPLUG_INT_EN		(1 << 26)
 #define SDVOC_HOTPLUG_INT_EN		(1 << 25)
 #define TV_HOTPLUG_INT_EN		(1 << 18)

[PATCH 12/12] gma500: Set the mapping mask

[Alan Cox]

From: Alan Cox <alan@linux.intel.com>

Some boards such as the Intel D2700MUD allow you to have over 4GB of RAM.
The GTT on the PVR based devices is 32bit however. Hugh Dickins points out
that we should therefore be setting the mapping gfp mask.

This is not the whole fix for the problem. Some further shmem patches will
be needed to deal with the corner cases.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/gpu/drm/gma500/gem.c |    2 ++
 drivers/gpu/drm/gma500/gtt.c |    4 ++++
 2 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/gma500/gem.c b/drivers/gpu/drm/gma500/gem.c
index 9fbb868..fc7d144 100644
--- a/drivers/gpu/drm/gma500/gem.c
+++ b/drivers/gpu/drm/gma500/gem.c
@@ -124,6 +124,8 @@ static int psb_gem_create(struct drm_file *file,
 		dev_err(dev->dev, "GEM init failed for %lld\n", size);
 		return -ENOMEM;
 	}
+	/* Limit the object to 32bit mappings */
+	mapping_set_gfp_mask(r->gem.filp->f_mapping, GFP_KERNEL | __GFP_DMA32);
 	/* Give the object a handle so we can carry it more easily */
 	ret = drm_gem_handle_create(file, &r->gem, &handle);
 	if (ret) {
diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c
index db2e823..54e5c9e 100644
--- a/drivers/gpu/drm/gma500/gtt.c
+++ b/drivers/gpu/drm/gma500/gtt.c
@@ -39,6 +39,10 @@ static inline uint32_t psb_gtt_mask_pte(uint32_t pfn, int type)
 {
 	uint32_t mask = PSB_PTE_VALID;
 
+	/* Ensure we explode rather than put an invalid low mapping of
+	   a high mapping page into the gtt */
+	BUG_ON(pfn & ~(0xFFFFFFFF >> PAGE_SHIFT));
+
 	if (type & PSB_MMU_CACHED_MEMORY)
 		mask |= PSB_PTE_CACHED;
 	if (type & PSB_MMU_RO_MEMORY)

Re: [PATCH 00/12] GMA500 updates take 2

[Dave Airlie]

On Wed, Apr 25, 2012 at 2:35 PM, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
>
> This version drops the backlight patch while I figure how it breaks some
> systems. It adds the now fixed hotplug monitor code.

Briefly reviewed and applied to -next.

You might want to nominate at least  the WC patch and maybe the 4GB
for fixes/stable if you haven't.

Dave.