[PATCH] [resend 3] Add support for Rise mP6 CPUs

[PATCH] [resend 3] Add support for Rise mP6 CPUs

[Ondrej Zary]

Add detection for Rise mP6 x86 CPUs and a quirk to mark CMPXCHG8B as present.

Result:
$ cat /proc/cpuinfo
processor       : 0
vendor_id       : RiseRiseRise
cpu family      : 5
model           : 0
model name      : mP6 (Kirin)
stepping        : 4
cpu MHz         : 200.443
cache size      : 16 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu tsc cx8 mmx up
bogomips        : 400.88
clflush size    : 32
cache_alignment : 32
address sizes   : 32 bits physical, 32 bits virtual
power management:

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 3c57033..5a356f3 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -505,3 +505,12 @@ config CPU_SUP_UMC_32
 	  CPU might render the kernel unbootable.
 
 	  If unsure, say N.
+
+config CPU_SUP_RISE_32
+	default y
+	bool "Support Rise processors" if PROCESSOR_SELECT
+	depends on !64BIT
+	---help---
+	  This enables detection, tunings and quirks for Rise processors
+
+	  If unsure, say N.
diff --git a/arch/x86/include/asm/processor.h 
b/arch/x86/include/asm/processor.h
index aa9088c..e3a4e7f 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -119,7 +119,8 @@ struct cpuinfo_x86 {
 #define X86_VENDOR_CENTAUR	5
 #define X86_VENDOR_TRANSMETA	7
 #define X86_VENDOR_NSC		8
-#define X86_VENDOR_NUM		9
+#define X86_VENDOR_RISE		9
+#define X86_VENDOR_NUM		10
 
 #define X86_VENDOR_UNKNOWN	0xff
 
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 25f24dc..1013eb6 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o
 obj-$(CONFIG_CPU_SUP_CENTAUR)		+= centaur.o
 obj-$(CONFIG_CPU_SUP_TRANSMETA_32)	+= transmeta.o
 obj-$(CONFIG_CPU_SUP_UMC_32)		+= umc.o
+obj-$(CONFIG_CPU_SUP_RISE_32)		+= rise.o
 
 obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
 
diff --git a/arch/x86/kernel/cpu/rise.c b/arch/x86/kernel/cpu/rise.c
new file mode 100644
index 0000000..2072a0f
--- /dev/null
+++ b/arch/x86/kernel/cpu/rise.c
@@ -0,0 +1,34 @@
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/processor.h>
+#include "cpu.h"
+
+static void __cpuinit init_rise(struct cpuinfo_x86 *c)
+{
+	/*
+	 * Datasheet says:
+	 * The CMPXCHG8B instruction is supported and always enabled on the
+	 * Rise mP6 processor; however, the default CPUID function bit is set
+	 * to 0 to circumvent a reported bug in Windows NT.
+	 */
+	set_cpu_cap(c, X86_FEATURE_CX8);
+	/* cache is always 16KB (8KB code + 8KB data) */
+	c->x86_cache_size = 16;
+}
+
+static const struct cpu_dev __cpuinitconst rise_cpu_dev = {
+	.c_vendor	= "Rise",
+	.c_ident	= { "RiseRiseRise" },
+	.c_models = {
+		{ .vendor = X86_VENDOR_RISE, .family = 5, .model_names =
+		  {
+			  [0] = "mP6 (Kirin)",
+			  [2] = "mP6 (Lynx)",
+		  }
+		},
+	},
+	.c_init		= init_rise,
+	.c_x86_vendor	= X86_VENDOR_RISE,
+};
+
+cpu_dev_register(rise_cpu_dev);

-- 
Ondrej Zary