[PATCH 1/6] ARM: OMAP2+: control: Add AM33XX control reg & sec clkctrl offset

[Paul Walmsley <paul@pwsan.com>]

From: Vaibhav Hiremath <hvaibhav@ti.com>

Define AM33XX control register, in order to allow access to
control register address space, also add CONTROL_SEC_CLK_CTRL
register offset; both are required in clock tree data,
for wdt0 and timer0 clock source select configuration.

CONTROL.SEC_CLK_CTRL register is provided to select/configure
clock input for WDT0 and TIMER0.

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
[paul@pwsan.com: added include of plat/am33xx.h to fix build break;
 added AM33XX_CONTROL_STATUS bitfields that will be needed for the clock
 tree; fixed some control.h whitespace problems while here]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/mach-omap2/control.h |   39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a406fd0..c43f03c 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -21,6 +21,8 @@
 #include <mach/ctrl_module_pad_core_44xx.h>
 #include <mach/ctrl_module_pad_wkup_44xx.h>
 
+#include <plat/am33xx.h>
+
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -28,6 +30,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg)					\
+		AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
 #else
 #define OMAP242X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
@@ -35,6 +39,8 @@
 		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
 		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define AM33XX_CTRL_REGADDR(reg)					\
+		AM33XX_L4_WK_IO_ADDRESS(AM33XX_SCM_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -312,15 +318,15 @@
 						OMAP343X_SCRATCHPAD + reg)
 
 /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
-#define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
-#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT   1
-#define AM35XX_VPFE_VBUSP_CLK_SHIFT     2
-#define AM35XX_HECC_VBUSP_CLK_SHIFT     3
-#define AM35XX_USBOTG_FCLK_SHIFT        8
-#define AM35XX_CPGMAC_FCLK_SHIFT        9
-#define AM35XX_VPFE_FCLK_SHIFT          10
-
-/*AM35XX CONTROL_LVL_INTR_CLEAR bits*/
+#define AM35XX_USBOTG_VBUSP_CLK_SHIFT	0
+#define AM35XX_CPGMAC_VBUSP_CLK_SHIFT	1
+#define AM35XX_VPFE_VBUSP_CLK_SHIFT	2
+#define AM35XX_HECC_VBUSP_CLK_SHIFT	3
+#define AM35XX_USBOTG_FCLK_SHIFT	8
+#define AM35XX_CPGMAC_FCLK_SHIFT	9
+#define AM35XX_VPFE_FCLK_SHIFT		10
+
+/* AM35XX CONTROL_LVL_INTR_CLEAR bits */
 #define AM35XX_CPGMAC_C0_MISC_PULSE_CLR	BIT(0)
 #define AM35XX_CPGMAC_C0_RX_PULSE_CLR	BIT(1)
 #define AM35XX_CPGMAC_C0_RX_THRESH_CLR	BIT(2)
@@ -330,21 +336,22 @@
 #define AM35XX_VPFE_CCDC_VD1_INT_CLR	BIT(6)
 #define AM35XX_VPFE_CCDC_VD2_INT_CLR	BIT(7)
 
-/*AM35XX CONTROL_IP_SW_RESET bits*/
+/* AM35XX CONTROL_IP_SW_RESET bits */
 #define AM35XX_USBOTGSS_SW_RST		BIT(0)
 #define AM35XX_CPGMACSS_SW_RST		BIT(1)
 #define AM35XX_VPFE_VBUSP_SW_RST	BIT(2)
 #define AM35XX_HECC_SW_RST		BIT(3)
 #define AM35XX_VPFE_PCLK_SW_RST		BIT(4)
 
-/*
- * CONTROL AM33XX STATUS register
- */
+/* AM33XX CONTROL_STATUS register */
 #define AM33XX_CONTROL_STATUS		0x040
+#define AM33XX_CONTROL_SEC_CLK_CTRL	0x1bc
 
-/*
- * CONTROL OMAP STATUS register to identify OMAP3 features
- */
+/* AM33XX CONTROL_STATUS bitfields (partial) */
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT		22
+#define AM33XX_CONTROL_STATUS_SYSBOOT1_MASK		(0x3 << 22)
+
+/* CONTROL OMAP STATUS register to identify OMAP3 features */
 #define OMAP3_CONTROL_OMAP_STATUS	0x044c
 
 #define OMAP3_SGX_SHIFT			13