All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Walmsley <paul@pwsan.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 0/7] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc
Date: Mon, 18 Jun 2012 00:15:54 -0600	[thread overview]
Message-ID: <20120618061037.30632.28539.stgit@dusk> (raw)

Hi,

Here is an initial set of fixes for power management and OMAP core
infrastructure for 3.5-rc.  Most of these patches address boot
warnings and power management problems on OMAP4, although a few of
them address more general issues.

Thanks to (in alphabetical order) Benoît Cousson, Tero Kristo, Kevin
Hilman, Vaibhav Hiremath, and Tony Lindgren for help with this series.

Compile- and boot-test information is below.  Note that on OMAP3,
return from suspend when off-mode is enabled is via GPIO buttons due to:

http://www.spinics.net/lists/arm-kernel/msg173688.html

Boot logs are available from:

http://www.pwsan.com/omap/bootlogs/20120617/omap_fixes_a_3.5rc__52a5ae406dadef781bfcf3a641dae2064e9697ff/

These patches are available via git from git://git.pwsan.com/linux-2.6
in the branch 'omap_fixes_a_3.5rc'.

This third version adds a fix for a new sparse warning, and drops
everything that is still being commented on or reviewed or which needs
acks.  Hopefully those will make it into a future 3.5-rc series.


- Paul

---

object size (delta in bytes from v3.5-rc3 (485802a6c524e62b5924849dd727ddbb1497cc71)):
 text 	 data 	  bss 	total 	kernel
    0 	    0 	    0 	    0 	5912osk_testconfig/vmlinux
  +32 	    0 	    0 	  +32 	n800_multi_omap2xxx/vmlinux
  +64 	    0 	    0 	  +64 	n800_testconfig/vmlinux
    0 	    0 	    0 	    0 	omap1510_defconfig/vmlinux
    0 	    0 	    0 	    0 	omap1_defconfig/vmlinux
  +64 	    0 	    0 	  +64 	omap2_4_testconfig/vmlinux
+4160 	    0 	    0 	+4160 	omap2plus_defconfig/vmlinux
    0 	    0 	    0 	    0 	omap2plus_no_pm/vmlinux
    0 	    0 	    0 	    0 	omap3_4_testconfig/vmlinux
    0 	    0 	    0 	    0 	omap3_testconfig/vmlinux
  +64 	    0 	    0 	  +64 	omap4_testconfig/vmlinux


Djamil Elaidi (1):
      ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby

Paul Walmsley (5):
      ARM: OMAP2+: hwmod code/data: fix 32K sync timer
      ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
      ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
      ARM: OMAP2+: CM: increase the module disable timeout
      ARM: OMAP2+: mux: fix sparse warning

Todd Poynor (1):
      ARM: OMAP: PM: Lock clocks list while generating summary


 arch/arm/mach-omap2/clock44xx_data.c         |    5 +++++
 arch/arm/mach-omap2/cm.h                     |   11 ++++++++++
 arch/arm/mach-omap2/cminst44xx.c             |    4 ++--
 arch/arm/mach-omap2/mux.c                    |    1 +
 arch/arm/mach-omap2/omap_hwmod.c             |   28 ++++++++++++++++++--------
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c   |    2 +-
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |    6 +++---
 arch/arm/plat-omap/clock.c                   |    2 ++
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    9 ++++++++
 9 files changed, 53 insertions(+), 15 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: paul@pwsan.com (Paul Walmsley)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 0/7] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc
Date: Mon, 18 Jun 2012 00:15:54 -0600	[thread overview]
Message-ID: <20120618061037.30632.28539.stgit@dusk> (raw)

Hi,

Here is an initial set of fixes for power management and OMAP core
infrastructure for 3.5-rc.  Most of these patches address boot
warnings and power management problems on OMAP4, although a few of
them address more general issues.

Thanks to (in alphabetical order) Beno?t Cousson, Tero Kristo, Kevin
Hilman, Vaibhav Hiremath, and Tony Lindgren for help with this series.

Compile- and boot-test information is below.  Note that on OMAP3,
return from suspend when off-mode is enabled is via GPIO buttons due to:

http://www.spinics.net/lists/arm-kernel/msg173688.html

Boot logs are available from:

http://www.pwsan.com/omap/bootlogs/20120617/omap_fixes_a_3.5rc__52a5ae406dadef781bfcf3a641dae2064e9697ff/

These patches are available via git from git://git.pwsan.com/linux-2.6
in the branch 'omap_fixes_a_3.5rc'.

This third version adds a fix for a new sparse warning, and drops
everything that is still being commented on or reviewed or which needs
acks.  Hopefully those will make it into a future 3.5-rc series.


- Paul

---

object size (delta in bytes from v3.5-rc3 (485802a6c524e62b5924849dd727ddbb1497cc71)):
 text 	 data 	  bss 	total 	kernel
    0 	    0 	    0 	    0 	5912osk_testconfig/vmlinux
  +32 	    0 	    0 	  +32 	n800_multi_omap2xxx/vmlinux
  +64 	    0 	    0 	  +64 	n800_testconfig/vmlinux
    0 	    0 	    0 	    0 	omap1510_defconfig/vmlinux
    0 	    0 	    0 	    0 	omap1_defconfig/vmlinux
  +64 	    0 	    0 	  +64 	omap2_4_testconfig/vmlinux
+4160 	    0 	    0 	+4160 	omap2plus_defconfig/vmlinux
    0 	    0 	    0 	    0 	omap2plus_no_pm/vmlinux
    0 	    0 	    0 	    0 	omap3_4_testconfig/vmlinux
    0 	    0 	    0 	    0 	omap3_testconfig/vmlinux
  +64 	    0 	    0 	  +64 	omap4_testconfig/vmlinux


Djamil Elaidi (1):
      ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby

Paul Walmsley (5):
      ARM: OMAP2+: hwmod code/data: fix 32K sync timer
      ARM: OMAP4: hwmod data: fix 32k sync timer idle modes
      ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks
      ARM: OMAP2+: CM: increase the module disable timeout
      ARM: OMAP2+: mux: fix sparse warning

Todd Poynor (1):
      ARM: OMAP: PM: Lock clocks list while generating summary


 arch/arm/mach-omap2/clock44xx_data.c         |    5 +++++
 arch/arm/mach-omap2/cm.h                     |   11 ++++++++++
 arch/arm/mach-omap2/cminst44xx.c             |    4 ++--
 arch/arm/mach-omap2/mux.c                    |    1 +
 arch/arm/mach-omap2/omap_hwmod.c             |   28 ++++++++++++++++++--------
 arch/arm/mach-omap2/omap_hwmod_3xxx_data.c   |    2 +-
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c   |    6 +++---
 arch/arm/plat-omap/clock.c                   |    2 ++
 arch/arm/plat-omap/include/plat/omap_hwmod.h |    9 ++++++++
 9 files changed, 53 insertions(+), 15 deletions(-)

             reply	other threads:[~2012-06-18  6:18 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-18  6:15 Paul Walmsley [this message]
2012-06-18  6:15 ` [PATCHv3 0/7] ARM: OMAP: core/hwmod: first set of fixes for 3.5-rc Paul Walmsley
2012-06-18  6:15 ` [PATCHv3 1/7] ARM: OMAP: PM: Lock clocks list while generating summary Paul Walmsley
2012-06-18  6:15   ` Paul Walmsley
2012-06-18  6:16 ` [PATCHv3 2/7] ARM: OMAP2+: hwmod code/data: fix 32K sync timer Paul Walmsley
2012-06-18  6:16   ` Paul Walmsley
2012-06-18  6:16 ` [PATCHv3 3/7] ARM: OMAP4+: hwmod: fix issue causing IPs not going back to Smart-Standby Paul Walmsley
2012-06-18  6:16   ` Paul Walmsley
2012-06-18  6:16 ` [PATCHv3 4/7] ARM: OMAP4: hwmod data: fix 32k sync timer idle modes Paul Walmsley
2012-06-18  6:16   ` Paul Walmsley
2012-06-18  6:16 ` [PATCHv3 5/7] ARM: OMAP4: clock data: add clockdomains for clocks used as main clocks Paul Walmsley
2012-06-18  6:16   ` Paul Walmsley
2012-06-18  9:35   ` Cousson, Benoit
2012-06-18  9:35     ` Cousson, Benoit
2012-06-18 15:45     ` Paul Walmsley
2012-06-18 15:45       ` Paul Walmsley
2012-06-18 21:36       ` Cousson, Benoit
2012-06-18 21:36         ` Cousson, Benoit
2012-06-18  6:16 ` [PATCHv3 6/7] ARM: OMAP2+: CM: increase the module disable timeout Paul Walmsley
2012-06-18  6:16   ` Paul Walmsley
2012-06-19 12:46   ` Sergei Shtylyov
2012-06-19 12:46     ` Sergei Shtylyov
2012-06-21 21:10     ` Paul Walmsley
2012-06-21 21:10       ` Paul Walmsley
2012-06-18  6:16 ` [PATCHv3 7/7] ARM: OMAP2+: mux: fix sparse warning Paul Walmsley
2012-06-18  6:16   ` Paul Walmsley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120618061037.30632.28539.stgit@dusk \
    --to=paul@pwsan.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.