* [RESEND PATCH V3 0/2] arm/dts: Add OMAP2420 H4 support
@ 2012-06-13 0:40 ` Jon Hunter
0 siblings, 0 replies; 10+ messages in thread
From: Jon Hunter @ 2012-06-13 0:40 UTC (permalink / raw)
To: device-tree, linux-omap, linux-arm; +Cc: Tony Lindgren, Jon Hunter
This series fixes the OMAP2 interrupt controller binding and adds support for
the OMAP2420 H4 board. I have verified that the kernel boots with device-tree
on this board.
This series is based upon the linux-omap master branch (3.5-rc1).
V3: Rename OMAP2420 SDP to OMAP2420 H4
V2: Correct typo in copyright date
Jon Hunter (2):
arm/dts: OMAP2: Add support for OMAP2420H4 Board
arm/dts: OMAP2: Fix interrupt controller binding
arch/arm/boot/dts/omap2.dtsi | 2 ++
arch/arm/boot/dts/omap2420-h4.dts | 20 ++++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm/boot/dts/omap2420-h4.dts
--
1.7.9.5
^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH V3 0/2] arm/dts: Add OMAP2420 H4 support
@ 2012-06-13 0:40 ` Jon Hunter
0 siblings, 0 replies; 10+ messages in thread
From: Jon Hunter @ 2012-06-13 0:40 UTC (permalink / raw)
To: linux-arm-kernel
This series fixes the OMAP2 interrupt controller binding and adds support for
the OMAP2420 H4 board. I have verified that the kernel boots with device-tree
on this board.
This series is based upon the linux-omap master branch (3.5-rc1).
V3: Rename OMAP2420 SDP to OMAP2420 H4
V2: Correct typo in copyright date
Jon Hunter (2):
arm/dts: OMAP2: Add support for OMAP2420H4 Board
arm/dts: OMAP2: Fix interrupt controller binding
arch/arm/boot/dts/omap2.dtsi | 2 ++
arch/arm/boot/dts/omap2420-h4.dts | 20 ++++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/arm/boot/dts/omap2420-h4.dts
--
1.7.9.5
^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board
2012-06-13 0:40 ` Jon Hunter
@ 2012-06-13 0:40 ` Jon Hunter
-1 siblings, 0 replies; 10+ messages in thread
From: Jon Hunter @ 2012-06-13 0:40 UTC (permalink / raw)
To: device-tree, linux-omap, linux-arm; +Cc: Tony Lindgren, Jon Hunter
Simple DTS file for OMAP2420H4 board adding memory information to allow
device-tree testing on an OMAP2420. OMAP2420H4 board has 64MB of RAM.
Verified that kernel boots with DT using a simple RAMDISK file-system on
OMAP2420H4.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap2420-h4.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 arch/arm/boot/dts/omap2420-h4.dts
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
new file mode 100644
index 0000000..25b50b7
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap2.dtsi"
+
+/ {
+ model = "TI OMAP2420 H4 board";
+ compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x84000000>; /* 64 MB */
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RESEND PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board
@ 2012-06-13 0:40 ` Jon Hunter
0 siblings, 0 replies; 10+ messages in thread
From: Jon Hunter @ 2012-06-13 0:40 UTC (permalink / raw)
To: linux-arm-kernel
Simple DTS file for OMAP2420H4 board adding memory information to allow
device-tree testing on an OMAP2420. OMAP2420H4 board has 64MB of RAM.
Verified that kernel boots with DT using a simple RAMDISK file-system on
OMAP2420H4.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap2420-h4.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 arch/arm/boot/dts/omap2420-h4.dts
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
new file mode 100644
index 0000000..25b50b7
--- /dev/null
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap2.dtsi"
+
+/ {
+ model = "TI OMAP2420 H4 board";
+ compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x84000000>; /* 64 MB */
+ };
+};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [RESEND PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board
2012-06-13 0:40 ` Jon Hunter
@ 2012-07-02 8:10 ` Tony Lindgren
-1 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2012-07-02 8:10 UTC (permalink / raw)
To: Jon Hunter; +Cc: device-tree, linux-omap, linux-arm
* Jon Hunter <jon-hunter@ti.com> [120612 17:45]:
> Simple DTS file for OMAP2420H4 board adding memory information to allow
> device-tree testing on an OMAP2420. OMAP2420H4 board has 64MB of RAM.
>
> Verified that kernel boots with DT using a simple RAMDISK file-system on
> OMAP2420H4.
Thanks, applying into dt branch.
Tony
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/boot/dts/omap2420-h4.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 arch/arm/boot/dts/omap2420-h4.dts
>
> diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
> new file mode 100644
> index 0000000..25b50b7
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap2420-h4.dts
> @@ -0,0 +1,20 @@
> +/*
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap2.dtsi"
> +
> +/ {
> + model = "TI OMAP2420 H4 board";
> + compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x84000000>; /* 64 MB */
> + };
> +};
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 10+ messages in thread* [RESEND PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board
@ 2012-07-02 8:10 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2012-07-02 8:10 UTC (permalink / raw)
To: linux-arm-kernel
* Jon Hunter <jon-hunter@ti.com> [120612 17:45]:
> Simple DTS file for OMAP2420H4 board adding memory information to allow
> device-tree testing on an OMAP2420. OMAP2420H4 board has 64MB of RAM.
>
> Verified that kernel boots with DT using a simple RAMDISK file-system on
> OMAP2420H4.
Thanks, applying into dt branch.
Tony
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/boot/dts/omap2420-h4.dts | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 arch/arm/boot/dts/omap2420-h4.dts
>
> diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
> new file mode 100644
> index 0000000..25b50b7
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap2420-h4.dts
> @@ -0,0 +1,20 @@
> +/*
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +/include/ "omap2.dtsi"
> +
> +/ {
> + model = "TI OMAP2420 H4 board";
> + compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x84000000>; /* 64 MB */
> + };
> +};
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding
2012-06-13 0:40 ` Jon Hunter
@ 2012-06-13 0:40 ` Jon Hunter
-1 siblings, 0 replies; 10+ messages in thread
From: Jon Hunter @ 2012-06-13 0:40 UTC (permalink / raw)
To: device-tree, linux-omap, linux-arm; +Cc: Tony Lindgren, Jon Hunter
When booting with device-tree on an OMAP2420H4, the kernel is hanging when
initialising the interrupts and following kernel dumps is seen ...
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4()
[ 0.000000] unable to get intc registers
[ 0.000000] Modules linked in:
[ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64)
[ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40)
[ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4)
[ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288)
[ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c)
[ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304)
[ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044)
[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.000000] of_irq_init: children remain, but no parents
The OMAP2 interrupt controller binding is missing the number of interrupts and
interrupt controller register address. Adding these fixes the problem.
This is based upon latest linux-omap master (3.5-rc1) git tree.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap2.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea..581cb08 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread* [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding
@ 2012-06-13 0:40 ` Jon Hunter
0 siblings, 0 replies; 10+ messages in thread
From: Jon Hunter @ 2012-06-13 0:40 UTC (permalink / raw)
To: linux-arm-kernel
When booting with device-tree on an OMAP2420H4, the kernel is hanging when
initialising the interrupts and following kernel dumps is seen ...
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4()
[ 0.000000] unable to get intc registers
[ 0.000000] Modules linked in:
[ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64)
[ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40)
[ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4)
[ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288)
[ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c)
[ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304)
[ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044)
[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.000000] of_irq_init: children remain, but no parents
The OMAP2 interrupt controller binding is missing the number of interrupts and
interrupt controller register address. Adding these fixes the problem.
This is based upon latest linux-omap master (3.5-rc1) git tree.
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
arch/arm/boot/dts/omap2.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index f2ab4ea..581cb08 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -44,6 +44,8 @@
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial at 4806a000 {
--
1.7.9.5
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding
2012-06-13 0:40 ` Jon Hunter
@ 2012-06-20 13:10 ` Tony Lindgren
-1 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2012-06-20 13:10 UTC (permalink / raw)
To: Jon Hunter; +Cc: device-tree, linux-omap, linux-arm
* Jon Hunter <jon-hunter@ti.com> [120612 17:45]:
> When booting with device-tree on an OMAP2420H4, the kernel is hanging when
> initialising the interrupts and following kernel dumps is seen ...
>
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4()
> [ 0.000000] unable to get intc registers
> [ 0.000000] Modules linked in:
> [ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64)
> [ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40)
> [ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4)
> [ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288)
> [ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c)
> [ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304)
> [ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044)
> [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
> [ 0.000000] of_irq_init: children remain, but no parents
>
> The OMAP2 interrupt controller binding is missing the number of interrupts and
> interrupt controller register address. Adding these fixes the problem.
Thanks this is a good one, applying into fixes.
Tony
>
> This is based upon latest linux-omap master (3.5-rc1) git tree.
>
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/boot/dts/omap2.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
> index f2ab4ea..581cb08 100644
> --- a/arch/arm/boot/dts/omap2.dtsi
> +++ b/arch/arm/boot/dts/omap2.dtsi
> @@ -44,6 +44,8 @@
> compatible = "ti,omap2-intc";
> interrupt-controller;
> #interrupt-cells = <1>;
> + ti,intc-size = <96>;
> + reg = <0x480FE000 0x1000>;
> };
>
> uart1: serial@4806a000 {
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 10+ messages in thread* [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding
@ 2012-06-20 13:10 ` Tony Lindgren
0 siblings, 0 replies; 10+ messages in thread
From: Tony Lindgren @ 2012-06-20 13:10 UTC (permalink / raw)
To: linux-arm-kernel
* Jon Hunter <jon-hunter@ti.com> [120612 17:45]:
> When booting with device-tree on an OMAP2420H4, the kernel is hanging when
> initialising the interrupts and following kernel dumps is seen ...
>
> [ 0.000000] ------------[ cut here ]------------
> [ 0.000000] WARNING: at arch/arm/mach-omap2/irq.c:271 omap_intc_of_init+0x50/0xb4()
> [ 0.000000] unable to get intc registers
> [ 0.000000] Modules linked in:
> [ 0.000000] [<c001befc>] (unwind_backtrace+0x0/0xf4) from [<c0040c34>] (warn_slowpath_common+0x4c/0x64)
> [ 0.000000] [<c0040c34>] (warn_slowpath_common+0x4c/0x64) from [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40)
> [ 0.000000] [<c0040ce0>] (warn_slowpath_fmt+0x30/0x40) from [<c066b8a4>] (omap_intc_of_init+0x50/0xb4)
> [ 0.000000] [<c066b8a4>] (omap_intc_of_init+0x50/0xb4) from [<c0688b70>] (of_irq_init+0x144/0x288)
> [ 0.000000] [<c0688b70>] (of_irq_init+0x144/0x288) from [<c0663294>] (init_IRQ+0x14/0x1c)
> [ 0.000000] [<c0663294>] (init_IRQ+0x14/0x1c) from [<c06607fc>] (start_kernel+0x198/0x304)
> [ 0.000000] [<c06607fc>] (start_kernel+0x198/0x304) from [<80008044>] (0x80008044)
> [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
> [ 0.000000] of_irq_init: children remain, but no parents
>
> The OMAP2 interrupt controller binding is missing the number of interrupts and
> interrupt controller register address. Adding these fixes the problem.
Thanks this is a good one, applying into fixes.
Tony
>
> This is based upon latest linux-omap master (3.5-rc1) git tree.
>
> Signed-off-by: Jon Hunter <jon-hunter@ti.com>
> ---
> arch/arm/boot/dts/omap2.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
> index f2ab4ea..581cb08 100644
> --- a/arch/arm/boot/dts/omap2.dtsi
> +++ b/arch/arm/boot/dts/omap2.dtsi
> @@ -44,6 +44,8 @@
> compatible = "ti,omap2-intc";
> interrupt-controller;
> #interrupt-cells = <1>;
> + ti,intc-size = <96>;
> + reg = <0x480FE000 0x1000>;
> };
>
> uart1: serial at 4806a000 {
> --
> 1.7.9.5
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-07-02 8:10 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-06-13 0:40 [RESEND PATCH V3 0/2] arm/dts: Add OMAP2420 H4 support Jon Hunter
2012-06-13 0:40 ` Jon Hunter
2012-06-13 0:40 ` [RESEND PATCH V3 1/2] arm/dts: OMAP2: Add support for OMAP2420H4 Board Jon Hunter
2012-06-13 0:40 ` Jon Hunter
2012-07-02 8:10 ` Tony Lindgren
2012-07-02 8:10 ` Tony Lindgren
2012-06-13 0:40 ` [RESEND PATCH V3 2/2] arm/dts: OMAP2: Fix interrupt controller binding Jon Hunter
2012-06-13 0:40 ` Jon Hunter
2012-06-20 13:10 ` Tony Lindgren
2012-06-20 13:10 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.