Re: [PATCH V2] ARM: OMAP4470: Fix OMAP4470 boot failure

[Tony Lindgren <tony@atomide.com>]

* Jon Hunter <jon-hunter@ti.com> [120625 11:20]:
> Adding linux-arm ML.
> 
> Jon
> 
> On 06/25/2012 12:38 PM, Jon Hunter wrote:
> > OMAP4470 currently fails to boot, printing various messages such as ...
> > 
> > omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck
> > omap_hwmod: mpu: cannot _init_clocks
> > ------------[ cut here ]------------
> > WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4()
> > omap_hwmod: mpu: couldn't init clocks
> > Modules linked in:
> > [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64)
> > [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40)
> > [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4)
> > [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60)
> > [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60)
> > [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250)
> > [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108)
> > [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c)
> > [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30)
> > [<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304)
> > [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044)
> > ---[ end trace 1b75b31a2719ed1c ]---
> > 
> > The problem is that currently none of the clocks are being registered for
> > OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics.
> > 
> > This fix allows the kernel to boot without failure using a simple RAMDISK file
> > system on OMAP4470 blaze board.
> > 
> > V2:
> > - Per feedback from Paul and Benoit the 4470 clock data is incomplete for new
> >   modules such as the 2D graphics block that has been added to the 4470.
> >   Therefore add a warning to indicate that the clock data is incomplete.

Thanks adding into fixes.

Tony