From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-ti/next
Date: Mon, 9 Jul 2012 11:46:11 -0700 [thread overview]
Message-ID: <20120709184611.GB23173@oliver-linux> (raw)
Hello,
The following changes since commit d702b0811df53a1fc2d8049e35431e4591d093c6:
ARM: cache: Move the cp15 CR register read before flushing the cache. (2012-07-07 14:07:44 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-ti next
for you to fetch changes up to 9af1a780c81639ca4b6f7035530dc8c7151bf201:
omap: am335x_evm: enable i2c1 channel (2012-07-09 11:12:19 -0700)
----------------------------------------------------------------
Igor Grinberg (1):
arm: omap3: cm-t35: minor comment and printf change
Ilya Yanok (1):
omap24xx_i2c: add 2-byte address support
Javier Martinez Canillas (2):
igep00x0: default to OMAP-specific serial driver
igep00x0: default mmcrootfstype to EXT4
Lad, Prabhakar (7):
da850/omap-l138: Add MMC support for DA850/OMAP-L138
arm, davinci: perform check for initializing global data and serial init
da850/omap-l138: Define SPI specific configs for SPL only when SPI is used
da850/omap-l138: Add support to read u-boot image from MMC/SD
da850/omap-l138: Fix NAND flash timings
da850/omap-l138: Add support for NAND SPL
da850/omap-l138: add support for direct NOR boot mode
Peter Meerwald (4):
beagle: add eeprom expansion board info for bct brettl4
beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static
beagle: fix termination of buddy env setting
beagle: removed unused pr_debug #define
Rajashekhara, Sudhakar (2):
da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
da850/omap-l138: Make MMC and NOR support mutually exclusive
Stefano Babic (4):
mcx: increased buffer for command line
OMAP3: mcx: set pinmux for uart4
OMAP3: mcx: updated default environment
OMAP3: mcx: read hot-water-button after reset
Steve Sakoman (3):
omap: am335x_evm: remove unused definitions
omap: am33xx: enable gpio support
omap: am335x_evm: enable i2c1 channel
Sughosh Ganu (1):
hawkboard/omapl-138: Add support for generating ais image for hawkboard
.gitignore | 3 +
Makefile | 5 +-
arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c | 11 ++
arch/arm/cpu/arm926ejs/davinci/spl.c | 20 ++--
arch/arm/cpu/armv7/am33xx/board.c | 10 ++
arch/arm/cpu/armv7/am33xx/clock.c | 20 ++++
arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
arch/arm/include/asm/arch-am33xx/cpu.h | 20 ++++
arch/arm/include/asm/arch-am33xx/gpio.h | 29 +++++
arch/arm/include/asm/arch-davinci/hardware.h | 1 +
arch/arm/include/asm/arch-davinci/pinmux_defs.h | 3 +
board/cm_t35/cm_t35.c | 4 +-
board/davinci/da8xxevm/da850evm.c | 54 ++++++++--
board/davinci/da8xxevm/hawkboard-ais-nand.cfg | 4 +
board/htkw/mcx/mcx.c | 23 ++++
board/htkw/mcx/mcx.h | 11 +-
board/ti/am335x/evm.c | 6 +-
board/ti/am335x/mux.c | 13 +++
board/ti/beagle/beagle.c | 16 +--
boards.cfg | 1 +
drivers/i2c/omap24xx_i2c.c | 58 +++++-----
drivers/mmc/Makefile | 4 +
drivers/mmc/spl_mmc_load.c | 62 +++++++++++
include/configs/am335x_evm.h | 2 +-
include/configs/da850evm.h | 93 ++++++++++++++--
include/configs/hawkboard.h | 1 +
include/configs/igep00x0.h | 4 +-
include/configs/mcx.h | 132 ++++++++++++++++-------
include/configs/omap3_beagle.h | 2 +-
include/mmc.h | 2 +
30 files changed, 502 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/include/asm/arch-am33xx/gpio.h
create mode 100644 board/davinci/da8xxevm/hawkboard-ais-nand.cfg
create mode 100644 drivers/mmc/spl_mmc_load.c
This includes the single patch I asked for in u-boot-ti/master as well
as a number of other small clean-ups, bugfixes or enhancements that have
been around for a bit, but did not meet the merge window and I don't
want to forget them. If you want me to carry them in my own /next
branch until -rc1 comes out, that's fine and this can just serve as
notice to interested parties that yes, really, patches have been picked
up.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120709/a6634cd8/attachment.pgp>
next reply other threads:[~2012-07-09 18:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-09 18:46 Tom Rini [this message]
2012-07-09 20:39 ` [U-Boot] Please pull u-boot-ti/next Albert ARIBAUD
-- strict thread matches above, loose matches on Subject: below --
2012-04-20 16:26 Tom Rini
2012-04-20 17:11 ` Albert ARIBAUD
2012-04-02 16:49 Tom Rini
2012-03-16 17:15 Tom Rini
2012-03-26 19:06 ` Tom Rini
2012-03-26 20:55 ` Tom Rini
2011-12-19 21:20 Tom Rini
2011-12-19 22:02 ` Albert ARIBAUD
2011-09-18 23:39 s-paulraj at ti.com
2011-09-19 7:15 ` Albert ARIBAUD
2011-09-19 7:47 ` Wolfgang Denk
2011-09-19 12:11 ` Albert ARIBAUD
2011-09-19 14:21 ` Paulraj, Sandeep
2011-09-20 6:49 ` Albert ARIBAUD
2010-12-21 1:09 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:08 [U-Boot] Please pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:24 ` Albert ARIBAUD
2010-12-13 22:54 ` Wolfgang Denk
2010-11-30 16:59 s-paulraj at ti.com
2010-11-30 20:39 ` Wolfgang Denk
2010-06-22 15:29 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
2010-06-29 19:59 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120709184611.GB23173@oliver-linux \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.