From: Albert ARIBAUD <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-ti/next
Date: Fri, 20 Apr 2012 19:11:56 +0200 [thread overview]
Message-ID: <4F9198DC.2080306@aribaud.net> (raw)
In-Reply-To: <20120420162648.GB23731@bill-the-cat>
Hi Tom,
Le 20/04/2012 18:26, Tom Rini a ?crit :
> Hello,
>
> The following changes since commit 0d32389f2c8cb967dde2d3f89abdbe5fab5b0788:
> David Purdy (1):
> kirkwood: add support for Cloud Engines Pogoplug E02
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-ti next
>
> Aneesh V (6):
> arm: adapt asm/linkage.h from Linux
> armv7: add appropriate headers for assembly functions
> ARM: enable Thumb build
> armv7: Use -march=armv7-a and thereby enable Thumb-2
> omap4+: Avoid using __attribute__ ((__packed__))
> OMAP4: enable Thumb build
>
> Balaji T K (3):
> arm: omap5: correct boot device mode7 for eMMC
> omap5: pbias ldo9 turn on
> mmc: omap5evm: Add eMMC saveenv support
>
> Enric Balletb? i Serra (1):
> OMAP3: igep00x0: Reduce lines of code for IGEP-based boards.
>
> Grazvydas Ignotas (3):
> OMAP3: pandora: pin mux updates for DM3730 board variant
> OMAP3: pandora: revise GPIO configuration
> OMAP3: pandora: drop console kernel argument
>
> Jonathan Solnit (1):
> ARM:OMAP+:MMC: Add parameters to MMC init
>
> Nishanth Menon (3):
> OMAP3+: Introduce generic logic for OMAP voltage controller
> OMAP4460: TPS Ensure SET1 is selected after voltage configuration
> OMAP4: scale voltage of core before MPU scales
>
> SRICHARAN R (16):
> OMAP5: clocks: Change clock settings as required for ES1.0 silicon.
> OMAP5: board: Add pinmux data for omap5_evm board.
> OMAP5: io: Configure the io settings for omap5430 sevm board.
> OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon.
> OMAP5: palmas: Configure nominal opp vdd values
> OMAP5: hwinit: Add the missing break statement
> OMAP4/5: Make the silicon revision variable common.
> OMAP5: SRAM: Change the SRAM base address.
> OMAP4/5: Make the sysctrl structure common
> OMAP4/5: device: Add support to get the device type.
> OMAP5: defconfig: Align the defconfig for 5430 ES1.0
> OMAP5: ddr: Change the ddr device name.
> OMAP4/5: emif: Correct the emif power mgt shadow register bit fields.
> power: twl6035: add palmas PMIC support
> OMAP3+: reset: Create a common reset layer.
> OMAP5: reset: Use cold reset in case of 5430ES1.0
>
> Tom Rini (9):
> tools, config.mk: Add gcc-version.sh, cc-version test from Linux
> Makefile: Add a 'checkthumb' rule
> omap4: Remove CONFIG_SYS_MMC_SET_DEV
> omap4+: Remove CONFIG_ARCH_CPU_INIT
> omap5912osk: Remove empty misc_init_r
> omap730p2: Remove empty misc_init_r
> omap3: Introduce weak misc_init_r
> include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
> include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
>
> Makefile | 7 +
> README | 8 +
> arch/arm/config.mk | 27 +-
> arch/arm/cpu/armv7/am33xx/board.c | 2 +-
> arch/arm/cpu/armv7/config.mk | 7 +-
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/mx6/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/omap-common/Makefile | 1 +
> arch/arm/cpu/armv7/omap-common/clocks-common.c | 99 ++---
> arch/arm/cpu/armv7/omap-common/emif-common.c | 41 ++-
> arch/arm/cpu/armv7/omap-common/hwinit-common.c | 16 +-
> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 14 +-
> .../arm/cpu/armv7/omap-common/{reset.S => reset.c} | 30 +-
> arch/arm/cpu/armv7/omap-common/spl.c | 1 +
> arch/arm/cpu/armv7/omap-common/spl_mmc.c | 5 +-
> arch/arm/cpu/armv7/omap-common/vc.c | 138 ++++++
> arch/arm/cpu/armv7/omap3/board.c | 12 +
> arch/arm/cpu/armv7/omap3/lowlevel_init.S | 41 +-
> arch/arm/cpu/armv7/omap4/clocks.c | 77 ++-
> arch/arm/cpu/armv7/omap4/hwinit.c | 24 +-
> arch/arm/cpu/armv7/omap4/sdram_elpida.c | 4 +
> arch/arm/cpu/armv7/omap5/Makefile | 2 +-
> arch/arm/cpu/armv7/omap5/clocks.c | 143 ++++--
> arch/arm/cpu/armv7/omap5/hwinit.c | 104 ++++-
> .../cpu/armv7/omap5/{sdram_elpida.c => sdram.c} | 101 +++--
> arch/arm/cpu/armv7/s5pc1xx/cache.S | 10 +-
> arch/arm/cpu/armv7/s5pc1xx/reset.S | 5 +-
> arch/arm/cpu/armv7/start.S | 13 +-
> arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 5 +-
> arch/arm/cpu/armv7/u8500/lowlevel.S | 9 +-
> arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap3/cpu.h | 5 +-
> arch/arm/include/asm/arch-omap3/mmc_host_def.h | 8 +-
> arch/arm/include/asm/arch-omap3/mux.h | 6 +
> arch/arm/include/asm/arch-omap4/clocks.h | 18 +-
> arch/arm/include/asm/arch-omap4/cpu.h | 11 +
> arch/arm/include/asm/arch-omap4/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap4/mux_omap4.h | 2 +-
> arch/arm/include/asm/arch-omap4/omap.h | 25 +-
> arch/arm/include/asm/arch-omap4/sys_proto.h | 8 +-
> arch/arm/include/asm/arch-omap5/clocks.h | 52 ++-
> arch/arm/include/asm/arch-omap5/cpu.h | 11 +
> arch/arm/include/asm/arch-omap5/mmc_host_def.h | 2 +-
> arch/arm/include/asm/arch-omap5/mux_omap5.h | 504 ++++++++++----------
> arch/arm/include/asm/arch-omap5/omap.h | 153 +++++--
> arch/arm/include/asm/arch-omap5/sys_proto.h | 8 +-
> arch/arm/include/asm/emif.h | 76 +++-
> arch/arm/include/asm/linkage.h | 7 +
> arch/arm/include/asm/omap_common.h | 11 +-
> board/cm_t35/cm_t35.c | 13 +-
> board/comelit/dig297/dig297.c | 2 +-
> board/corscience/tricorder/tricorder.c | 2 +-
> board/htkw/mcx/mcx.c | 13 +-
> board/isee/igep0020/igep0020.c | 4 +-
> board/isee/igep0030/igep0030.c | 4 +-
> board/logicpd/am3517evm/am3517evm.c | 2 +-
> board/logicpd/omap3som/omap3logic.c | 13 +-
> board/logicpd/zoom1/zoom1.c | 2 +-
> board/logicpd/zoom2/zoom2.c | 2 +-
> board/matrix_vision/mvblx/mvblx.c | 4 +-
> board/overo/overo.c | 2 +-
> board/pandora/pandora.c | 59 ++-
> board/pandora/pandora.h | 6 +
> board/technexion/twister/twister.c | 2 +-
> board/teejet/mt_ventoux/mt_ventoux.c | 9 +-
> board/ti/am3517crane/am3517crane.c | 2 +-
> board/ti/beagle/beagle.c | 2 +-
> board/ti/evm/evm.c | 2 +-
> board/ti/omap5912osk/omap5912osk.c | 7 -
> board/ti/omap5_evm/evm.c | 10 +-
> board/ti/omap5_evm/mux_data.h | 489 ++++++++++---------
> board/ti/omap730p2/omap730p2.c | 6 -
> board/ti/panda/panda.c | 2 +-
> board/ti/panda/panda_mux_data.h | 2 +-
> board/ti/sdp3430/sdp.c | 2 +-
> board/ti/sdp4430/sdp.c | 4 +-
> board/ti/sdp4430/sdp4430_mux_data.h | 2 +-
> board/timll/devkit8000/devkit8000.c | 2 +-
> boards.cfg | 4 +-
> config.mk | 6 +-
> drivers/mmc/omap_hsmmc.c | 61 +++-
> drivers/power/Makefile | 1 +
> drivers/power/twl6035.c | 65 +++
> include/configs/P1023RDS.h | 3 -
> include/configs/P2020COME.h | 2 -
> include/configs/am3517_crane.h | 1 -
> include/configs/am3517_evm.h | 2 -
> include/configs/at91sam9263ek.h | 2 -
> include/configs/da830evm.h | 1 -
> include/configs/ea20.h | 1 -
> include/configs/eb_cpux9k2.h | 2 -
> include/configs/flea3.h | 2 -
> include/configs/hawkboard.h | 1 -
> include/configs/igep0030.h | 261 ----------
> include/configs/{igep0020.h => igep00x0.h} | 15 +-
> include/configs/imx27lite-common.h | 1 -
> include/configs/mcx.h | 2 -
> include/configs/meesc.h | 1 -
> include/configs/mv-common.h | 1 -
> include/configs/mx25pdk.h | 1 -
> include/configs/mx35pdk.h | 2 -
> include/configs/omap3_pandora.h | 3 +-
> include/configs/omap4_common.h | 4 +-
> include/configs/omap5912osk.h | 2 -
> include/configs/omap5_evm.h | 26 +-
> include/configs/omap730p2.h | 2 -
> include/configs/otc570.h | 1 -
> include/configs/p1_p2_rdb_pc.h | 3 -
> include/configs/spear-common.h | 1 -
> include/configs/tam3517-common.h | 1 -
> include/configs/tx25.h | 2 -
> include/configs/zmx25.h | 2 -
> include/linux/linkage.h | 7 +-
> .../armv7/omap-common/reset.S => include/twl6035.h | 38 +-
> tools/gcc-version.sh | 32 ++
> 115 files changed, 1779 insertions(+), 1321 deletions(-)
> copy arch/arm/cpu/armv7/omap-common/{reset.S => reset.c} (70%)
> create mode 100644 arch/arm/cpu/armv7/omap-common/vc.c
> rename arch/arm/cpu/armv7/omap5/{sdram_elpida.c => sdram.c} (64%)
> create mode 100644 arch/arm/include/asm/linkage.h
> create mode 100644 drivers/power/twl6035.c
> delete mode 100644 include/configs/igep0030.h
> rename include/configs/{igep0020.h => igep00x0.h} (97%)
> rename arch/arm/cpu/armv7/omap-common/reset.S => include/twl6035.h (53%)
> create mode 100755 tools/gcc-version.sh
Applied to u-boot-arm/next, thanks!
Amicalement,
--
Albert.
next prev parent reply other threads:[~2012-04-20 17:11 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-20 16:26 [U-Boot] Please pull u-boot-ti/next Tom Rini
2012-04-20 17:11 ` Albert ARIBAUD [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-07-09 18:46 Tom Rini
2012-07-09 20:39 ` Albert ARIBAUD
2012-04-02 16:49 Tom Rini
2012-03-16 17:15 Tom Rini
2012-03-26 19:06 ` Tom Rini
2012-03-26 20:55 ` Tom Rini
2011-12-19 21:20 Tom Rini
2011-12-19 22:02 ` Albert ARIBAUD
2011-09-18 23:39 s-paulraj at ti.com
2011-09-19 7:15 ` Albert ARIBAUD
2011-09-19 7:47 ` Wolfgang Denk
2011-09-19 12:11 ` Albert ARIBAUD
2011-09-19 14:21 ` Paulraj, Sandeep
2011-09-20 6:49 ` Albert ARIBAUD
2010-12-21 1:09 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:08 [U-Boot] Please pull u-boot-ti/next s-paulraj at ti.com
2010-12-11 16:24 ` Albert ARIBAUD
2010-12-13 22:54 ` Wolfgang Denk
2010-11-30 16:59 s-paulraj at ti.com
2010-11-30 20:39 ` Wolfgang Denk
2010-06-22 15:29 [U-Boot] Please Pull u-boot-ti/next s-paulraj at ti.com
2010-06-29 19:59 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F9198DC.2080306@aribaud.net \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.