All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: jgarzik@pobox.com, JBottomley@parallels.com
Cc: linux-ide@vger.kernel.org, linux-scsi@vger.kernel.org
Subject: [resend PATCH 2/5] libata: export ata_port suspend/resume infrastructure for sas
Date: Mon, 09 Jul 2012 21:05:52 -0700	[thread overview]
Message-ID: <20120710040552.26529.47482.stgit@dwillia2-linux.jf.intel.com> (raw)
In-Reply-To: <20120710040434.26529.86552.stgit@dwillia2-linux.jf.intel.com>

Reuse ata_port_{suspend|resume}_common for sas.  This path is chosen
over adding coordination between ata-tranport and sas-transport because
libsas wants to revalidate the domain at resume-time at the host level.
It can not validate links have resumed properly until libata has had a
chance to perform its revalidation, and any sane placing of an ata_port
in the sas-transport model would delay it's resumption until after the
host.

Export the common portion of port suspend/resume (bypass pm_runtime),
and allow sas to perform these operations asynchronously (similar to the
libsas async-ata probe implmentation).  Async operation is determined by
having an external, rather than stack based, location for storing the
result of the operation.

Reviewed-by: Jacek Danecki <jacek.danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/ata/libata-core.c |   58 ++++++++++++++++++++++++++++++++++++---------
 include/linux/libata.h    |   11 +++++++++
 2 files changed, 57 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index efd2c72..da31691 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5248,16 +5248,20 @@ bool ata_link_offline(struct ata_link *link)
 #ifdef CONFIG_PM
 static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 			       unsigned int action, unsigned int ehi_flags,
-			       int wait)
+			       int *async)
 {
 	struct ata_link *link;
 	unsigned long flags;
-	int rc;
+	int rc = 0;
 
 	/* Previous resume operation might still be in
 	 * progress.  Wait for PM_PENDING to clear.
 	 */
 	if (ap->pflags & ATA_PFLAG_PM_PENDING) {
+		if (async) {
+			*async = -EAGAIN;
+			return 0;
+		}
 		ata_port_wait_eh(ap);
 		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
 	}
@@ -5266,10 +5270,10 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 	spin_lock_irqsave(ap->lock, flags);
 
 	ap->pm_mesg = mesg;
-	if (wait) {
-		rc = 0;
+	if (async)
+		ap->pm_result = async;
+	else
 		ap->pm_result = &rc;
-	}
 
 	ap->pflags |= ATA_PFLAG_PM_PENDING;
 	ata_for_each_link(link, ap, HOST_FIRST) {
@@ -5282,7 +5286,7 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	/* wait and check result */
-	if (wait) {
+	if (!async) {
 		ata_port_wait_eh(ap);
 		WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
 	}
@@ -5292,9 +5296,8 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 
 #define to_ata_port(d) container_of(d, struct ata_port, tdev)
 
-static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
+static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async)
 {
-	struct ata_port *ap = to_ata_port(dev);
 	unsigned int ehi_flags = ATA_EHI_QUIET;
 	int rc;
 
@@ -5309,10 +5312,17 @@ static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
 	if (mesg.event == PM_EVENT_SUSPEND)
 		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
 
-	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, 1);
+	rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, async);
 	return rc;
 }
 
+static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
+{
+	struct ata_port *ap = to_ata_port(dev);
+
+	return __ata_port_suspend_common(ap, mesg, NULL);
+}
+
 static int ata_port_suspend(struct device *dev)
 {
 	if (pm_runtime_suspended(dev))
@@ -5337,16 +5347,22 @@ static int ata_port_poweroff(struct device *dev)
 	return ata_port_suspend_common(dev, PMSG_HIBERNATE);
 }
 
-static int ata_port_resume_common(struct device *dev)
+static int __ata_port_resume_common(struct ata_port *ap, int *async)
 {
-	struct ata_port *ap = to_ata_port(dev);
 	int rc;
 
 	rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET,
-		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 1);
+		ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async);
 	return rc;
 }
 
+static int ata_port_resume_common(struct device *dev)
+{
+	struct ata_port *ap = to_ata_port(dev);
+
+	return __ata_port_resume_common(ap, NULL);
+}
+
 static int ata_port_resume(struct device *dev)
 {
 	int rc;
@@ -5379,6 +5395,24 @@ static const struct dev_pm_ops ata_port_pm_ops = {
 	.runtime_idle = ata_port_runtime_idle,
 };
 
+/* sas ports don't participate in pm runtime management of ata_ports,
+ * and need to resume ata devices at the domain level, not the per-port
+ * level. sas suspend/resume is async to allow parallel port recovery
+ * since sas has multiple ata_port instances per Scsi_Host.
+ */
+int ata_sas_port_async_suspend(struct ata_port *ap, int *async)
+{
+	return __ata_port_suspend_common(ap, PMSG_SUSPEND, async);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend);
+
+int ata_sas_port_async_resume(struct ata_port *ap, int *async)
+{
+	return __ata_port_resume_common(ap, async);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_async_resume);
+
+
 /**
  *	ata_host_suspend - suspend host
  *	@host: host to suspend
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f777d30..af467d3 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1016,6 +1016,17 @@ extern bool ata_link_offline(struct ata_link *link);
 #ifdef CONFIG_PM
 extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
 extern void ata_host_resume(struct ata_host *host);
+extern int ata_sas_port_async_suspend(struct ata_port *ap, int *async);
+extern int ata_sas_port_async_resume(struct ata_port *ap, int *async);
+#else
+static inline int ata_sas_port_async_suspend(struct ata_port *ap, int *async)
+{
+	return 0;
+}
+static inline int ata_sas_port_async_resume(struct ata_port *ap, int *async)
+{
+	return 0;
+}
 #endif
 extern int ata_ratelimit(void);
 extern void ata_msleep(struct ata_port *ap, unsigned int msecs);


  parent reply	other threads:[~2012-07-10  3:49 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-10  4:05 [resend PATCH 0/5] libsas, libata: suspend / resume and "reset once" Dan Williams
2012-07-10  4:05 ` [resend PATCH 1/5] libata: reset once Dan Williams
2012-07-25  5:20   ` Jeff Garzik
2012-07-10  4:05 ` Dan Williams [this message]
2012-07-25  5:21   ` [resend PATCH 2/5] libata: export ata_port suspend/resume infrastructure for sas Jeff Garzik
2012-07-10  4:05 ` [resend PATCH 3/5] libsas: suspend / resume support Dan Williams
2012-07-10  4:06 ` [resend PATCH 4/5] isci: implement suspend/resume support Dan Williams
2012-07-10  4:06 ` [resend PATCH 5/5] libsas, ipr: cleanup ata_host flags initialization via ata_host_init Dan Williams
2012-07-25 18:42   ` Jeff Garzik
2012-07-25 20:01   ` Brian King

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120710040552.26529.47482.stgit@dwillia2-linux.jf.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=JBottomley@parallels.com \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.