* [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools". @ 2012-07-19 8:54 Kelvin Cheung 2012-07-19 8:54 ` [Buildroot] [PATCH 2/2] New package: cpuload Kelvin Cheung 2012-07-19 21:50 ` [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools" Thomas Petazzoni 0 siblings, 2 replies; 5+ messages in thread From: Kelvin Cheung @ 2012-07-19 8:54 UTC (permalink / raw) To: buildroot bwm-ng can monitor not only network bandwidth but also disk-io bandwidth, so it is more appropriate to put bwm-ng into System tools. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> --- package/Config.in | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/package/Config.in b/package/Config.in index 6aabb8e..154b82c 100644 --- a/package/Config.in +++ b/package/Config.in @@ -511,7 +511,6 @@ endif source "package/bind/Config.in" source "package/bmon/Config.in" source "package/bridge-utils/Config.in" -source "package/bwm-ng/Config.in" source "package/can-utils/Config.in" source "package/connman/Config.in" source "package/ctorrent/Config.in" @@ -658,6 +657,7 @@ source "package/attr/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/bootutils/Config.in" endif +source "package/bwm-ng/Config.in" source "package/htop/Config.in" source "package/kmod/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS -- 1.7.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] New package: cpuload 2012-07-19 8:54 [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools" Kelvin Cheung @ 2012-07-19 8:54 ` Kelvin Cheung 2012-07-19 21:50 ` Thomas Petazzoni 2012-07-19 21:50 ` [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools" Thomas Petazzoni 1 sibling, 1 reply; 5+ messages in thread From: Kelvin Cheung @ 2012-07-19 8:54 UTC (permalink / raw) To: buildroot Add new package: cpuload cpuload is a simple tool to obtain intuitive vision of CPU load (including total, user, system, irq and softirq) within a certain time, which is especially useful for embedded system without GUI. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> --- package/Config.in | 1 + package/cpuload/Config.in | 8 ++++++++ package/cpuload/cpuload.mk | 11 +++++++++++ 3 files changed, 20 insertions(+), 0 deletions(-) create mode 100644 package/cpuload/Config.in create mode 100644 package/cpuload/cpuload.mk diff --git a/package/Config.in b/package/Config.in index 154b82c..817716b 100644 --- a/package/Config.in +++ b/package/Config.in @@ -658,6 +658,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/bootutils/Config.in" endif source "package/bwm-ng/Config.in" +source "package/cpuload/Config.in" source "package/htop/Config.in" source "package/kmod/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS diff --git a/package/cpuload/Config.in b/package/cpuload/Config.in new file mode 100644 index 0000000..82bc450 --- /dev/null +++ b/package/cpuload/Config.in @@ -0,0 +1,8 @@ +config BR2_PACKAGE_CPULOAD + bool "cpuload" + help + cpuload is a simple tool to obtain intuitive vision of CPU load + (including total, user, system, irq and softirq) within a certain + time, which is especially useful for embedded system without GUI. + + https://github.com/kelvincheung/cpuload diff --git a/package/cpuload/cpuload.mk b/package/cpuload/cpuload.mk new file mode 100644 index 0000000..2cbe82a --- /dev/null +++ b/package/cpuload/cpuload.mk @@ -0,0 +1,11 @@ +############################################################# +# +# cpuload +# +############################################################# + +CPULOAD_VERSION = v0.2 +CPULOAD_SITE = git://github.com/kelvincheung/cpuload.git + + +$(eval $(autotools-package)) -- 1.7.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] New package: cpuload 2012-07-19 8:54 ` [Buildroot] [PATCH 2/2] New package: cpuload Kelvin Cheung @ 2012-07-19 21:50 ` Thomas Petazzoni 2012-07-20 6:05 ` Kelvin Cheung 0 siblings, 1 reply; 5+ messages in thread From: Thomas Petazzoni @ 2012-07-19 21:50 UTC (permalink / raw) To: buildroot Le Thu, 19 Jul 2012 16:54:09 +0800, Kelvin Cheung <keguang.zhang@gmail.com> a ?crit : > Add new package: cpuload > > cpuload is a simple tool to obtain intuitive vision of CPU load > (including total, user, system, irq and softirq) within a certain > time, which is especially useful for embedded system without GUI. > > Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Your code includes <wchar.h>, but the package does not depend on BR2_USE_WCHAR. Did you try to build your package with the minimal uClibc settings (i.e wchar, IPv6, RPC, locale, etc. disabled) to see if it builds without requiring any special toolchain feature? Thanks, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 2/2] New package: cpuload 2012-07-19 21:50 ` Thomas Petazzoni @ 2012-07-20 6:05 ` Kelvin Cheung 0 siblings, 0 replies; 5+ messages in thread From: Kelvin Cheung @ 2012-07-20 6:05 UTC (permalink / raw) To: buildroot 2012/7/20 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > Le Thu, 19 Jul 2012 16:54:09 +0800, > Kelvin Cheung <keguang.zhang@gmail.com> a ?crit : > > > Add new package: cpuload > > > > cpuload is a simple tool to obtain intuitive vision of CPU load > > (including total, user, system, irq and softirq) within a certain > > time, which is especially useful for embedded system without GUI. > > > > Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> > > Your code includes <wchar.h>, but the package does not depend on > BR2_USE_WCHAR. Did you try to build your package with the minimal > uClibc settings (i.e wchar, IPv6, RPC, locale, etc. disabled) to see if > it builds without requiring any special toolchain feature? > Thanks for reminding me. I have removed the unnecessary wide-character string code in cpuload, and upgrade it to version 0.3. Please review the new patch. In addtion, I have tested 'cpuload' on several architectures: x86, MIPS and ARM. It works well so far. > > Thanks, > > Thomas > -- > Thomas Petazzoni, Free Electrons > Kernel, drivers, real-time and embedded Linux > development, consulting, training and support. > http://free-electrons.com > -- Best Regards! Kelvin -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120720/6db05983/attachment.html> ^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools". 2012-07-19 8:54 [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools" Kelvin Cheung 2012-07-19 8:54 ` [Buildroot] [PATCH 2/2] New package: cpuload Kelvin Cheung @ 2012-07-19 21:50 ` Thomas Petazzoni 1 sibling, 0 replies; 5+ messages in thread From: Thomas Petazzoni @ 2012-07-19 21:50 UTC (permalink / raw) To: buildroot Le Thu, 19 Jul 2012 16:54:08 +0800, Kelvin Cheung <keguang.zhang@gmail.com> a ?crit : > bwm-ng can monitor not only network bandwidth but also disk-io > bandwidth, so it is more appropriate to put bwm-ng into System tools. > > Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Makes sense, applied, thanks. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-07-20 6:05 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-07-19 8:54 [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools" Kelvin Cheung 2012-07-19 8:54 ` [Buildroot] [PATCH 2/2] New package: cpuload Kelvin Cheung 2012-07-19 21:50 ` Thomas Petazzoni 2012-07-20 6:05 ` Kelvin Cheung 2012-07-19 21:50 ` [Buildroot] [PATCH 1/2] bwm-ng: move bwm-ng from "Networking applications" to "System tools" Thomas Petazzoni
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.