* [GIT PULL] x86/debug changes for v3.6
@ 2012-07-22 13:53 Ingo Molnar
0 siblings, 0 replies; only message in thread
From: Ingo Molnar @ 2012-07-22 13:53 UTC (permalink / raw)
To: Linus Torvalds
Cc: linux-kernel, H. Peter Anvin, Thomas Gleixner, Andrew Morton
Linus,
Please pull the latest x86-debug-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-debug-for-linus
HEAD: 0fa0e2f02e8edfbdb5f86d1cab0fa6dc0517489f x86: Move call to print_modules() out of show_regs()
Thanks,
Ingo
------------------>
Jan Beulich (3):
x86/microcode: Mark microcode_id[] as __initconst
x86/mm: Mark free_initrd_mem() as __init
x86: Move call to print_modules() out of show_regs()
Joe Perches (1):
x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
Li Zhong (1):
x86/nmi: Clean up register_nmi_handler() usage
Steven Rostedt (3):
x86: Save cr2 in NMI in case NMIs take a page fault
x86: Remove cmpxchg from i386 NMI nesting code
x86: Save cr2 in NMI in case NMIs take a page fault (for i386)
arch/x86/include/asm/floppy.h | 2 +-
arch/x86/include/asm/nmi.h | 20 +------
arch/x86/include/asm/pci_x86.h | 8 ++-
arch/x86/include/asm/pgtable-2level.h | 4 +-
arch/x86/include/asm/pgtable-3level.h | 6 +-
arch/x86/include/asm/pgtable_64.h | 8 +--
arch/x86/kernel/alternative.c | 17 ++++--
arch/x86/kernel/amd_nb.c | 10 ++--
arch/x86/kernel/apic/io_apic.c | 38 ++++++-------
arch/x86/kernel/apic/summit_32.c | 22 +++++---
arch/x86/kernel/apm_32.c | 29 +++++-----
arch/x86/kernel/cpu/bugs.c | 20 +++----
arch/x86/kernel/cpu/mcheck/mce.c | 22 ++++----
arch/x86/kernel/cpu/perf_event_intel.c | 14 +++--
arch/x86/kernel/dumpstack.c | 5 +-
arch/x86/kernel/dumpstack_32.c | 25 ++++----
arch/x86/kernel/dumpstack_64.c | 21 ++++---
arch/x86/kernel/entry_64.S | 20 +++++++
arch/x86/kernel/irq.c | 4 +-
arch/x86/kernel/microcode_core.c | 2 +-
arch/x86/kernel/module.c | 32 +++++++----
arch/x86/kernel/nmi.c | 47 +++++++++++-----
arch/x86/kernel/nmi_selftest.c | 7 ++-
arch/x86/kernel/pci-calgary_64.c | 34 ++++++-----
arch/x86/kernel/process.c | 34 ++++++-----
arch/x86/kernel/process_64.c | 8 +--
arch/x86/kernel/reboot.c | 14 +++--
arch/x86/kernel/signal.c | 5 +-
arch/x86/kernel/smpboot.c | 97 +++++++++++++++-----------------
arch/x86/kernel/traps.c | 19 ++++---
arch/x86/kernel/tsc.c | 50 ++++++++--------
arch/x86/kernel/vm86_32.c | 6 +-
arch/x86/kernel/vsyscall_64.c | 17 +++---
arch/x86/kernel/xsave.c | 12 ++--
arch/x86/mm/init.c | 2 +-
35 files changed, 364 insertions(+), 317 deletions(-)
diff --git a/arch/x86/include/asm/floppy.h b/arch/x86/include/asm/floppy.h
index dbe82a5..d3d7469 100644
--- a/arch/x86/include/asm/floppy.h
+++ b/arch/x86/include/asm/floppy.h
@@ -99,7 +99,7 @@ static irqreturn_t floppy_hardint(int irq, void *dev_id)
virtual_dma_residue += virtual_dma_count;
virtual_dma_count = 0;
#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+ printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
virtual_dma_count, virtual_dma_residue, calls, bytes,
dma_wait);
calls = 0;
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index dc580c4..c0fa356 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -44,28 +44,14 @@ struct nmiaction {
const char *name;
};
-#define register_nmi_handler(t, fn, fg, n) \
+#define register_nmi_handler(t, fn, fg, n, init...) \
({ \
- static struct nmiaction fn##_na = { \
+ static struct nmiaction init fn##_na = { \
.handler = (fn), \
.name = (n), \
.flags = (fg), \
}; \
- __register_nmi_handler((t), &fn##_na); \
-})
-
-/*
- * For special handlers that register/unregister in the
- * init section only. This should be considered rare.
- */
-#define register_nmi_handler_initonly(t, fn, fg, n) \
-({ \
- static struct nmiaction fn##_na __initdata = { \
- .handler = (fn), \
- .name = (n), \
- .flags = (fg), \
- }; \
- __register_nmi_handler((t), &fn##_na); \
+ __register_nmi_handler((t), &fn##_na); \
})
int __register_nmi_handler(unsigned int, struct nmiaction *);
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index b3a5317..5ad24a8 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -7,9 +7,13 @@
#undef DEBUG
#ifdef DEBUG
-#define DBG(x...) printk(x)
+#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
#else
-#define DBG(x...)
+#define DBG(fmt, ...) \
+do { \
+ if (0) \
+ printk(fmt, ##__VA_ARGS__); \
+} while (0)
#endif
#define PCI_PROBE_BIOS 0x0001
diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h
index 98391db..f2b489c 100644
--- a/arch/x86/include/asm/pgtable-2level.h
+++ b/arch/x86/include/asm/pgtable-2level.h
@@ -2,9 +2,9 @@
#define _ASM_X86_PGTABLE_2LEVEL_H
#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
+ pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low)
#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+ pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e))
/*
* Certain architectures need to do special things when PTEs
diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 43876f1..f824cfb 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -9,13 +9,13 @@
*/
#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
+ pr_err("%s:%d: bad pte %p(%08lx%08lx)\n", \
__FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016Lx).\n", \
+ pr_err("%s:%d: bad pmd %p(%016Lx)\n", \
__FILE__, __LINE__, &(e), pmd_val(e))
#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016Lx).\n", \
+ pr_err("%s:%d: bad pgd %p(%016Lx)\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
/* Rules for using set_pte: the pte being assigned *must* be
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 975f709..8251be0 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -26,16 +26,16 @@ extern pgd_t init_level4_pgt[];
extern void paging_init(void);
#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%016lx).\n", \
+ pr_err("%s:%d: bad pte %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pte_val(e))
#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016lx).\n", \
+ pr_err("%s:%d: bad pmd %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pmd_val(e))
#define pud_ERROR(e) \
- printk("%s:%d: bad pud %p(%016lx).\n", \
+ pr_err("%s:%d: bad pud %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pud_val(e))
#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016lx).\n", \
+ pr_err("%s:%d: bad pgd %p(%016lx)\n", \
__FILE__, __LINE__, &(e), pgd_val(e))
struct mm_struct;
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 1f84794..1729d72 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) "SMP alternatives: " fmt
+
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mutex.h>
@@ -63,8 +65,11 @@ static int __init setup_noreplace_paravirt(char *str)
__setup("noreplace-paravirt", setup_noreplace_paravirt);
#endif
-#define DPRINTK(fmt, args...) if (debug_alternative) \
- printk(KERN_DEBUG fmt, args)
+#define DPRINTK(fmt, ...) \
+do { \
+ if (debug_alternative) \
+ printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
+} while (0)
/*
* Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
@@ -428,7 +433,7 @@ void alternatives_smp_switch(int smp)
* If this still occurs then you should see a hang
* or crash shortly after this line:
*/
- printk("lockdep: fixing up alternatives.\n");
+ pr_info("lockdep: fixing up alternatives\n");
#endif
if (noreplace_smp || smp_alt_once || skip_smp_alternatives)
@@ -444,14 +449,14 @@ void alternatives_smp_switch(int smp)
if (smp == smp_mode) {
/* nothing */
} else if (smp) {
- printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
+ pr_info("switching to SMP code\n");
clear_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
clear_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
list_for_each_entry(mod, &smp_alt_modules, next)
alternatives_smp_lock(mod->locks, mod->locks_end,
mod->text, mod->text_end);
} else {
- printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+ pr_info("switching to UP code\n");
set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
list_for_each_entry(mod, &smp_alt_modules, next)
@@ -546,7 +551,7 @@ void __init alternative_instructions(void)
#ifdef CONFIG_SMP
if (smp_alt_once) {
if (1 == num_possible_cpus()) {
- printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+ pr_info("switching to UP code\n");
set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index be16854..f29f6dd 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -2,6 +2,9 @@
* Shared support code for AMD K8 northbridges and derivates.
* Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/init.h>
@@ -258,7 +261,7 @@ void amd_flush_garts(void)
}
spin_unlock_irqrestore(&gart_lock, flags);
if (!flushed)
- printk("nothing to flush?\n");
+ pr_notice("nothing to flush?\n");
}
EXPORT_SYMBOL_GPL(amd_flush_garts);
@@ -269,11 +272,10 @@ static __init int init_amd_nbs(void)
err = amd_cache_northbridges();
if (err < 0)
- printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n");
+ pr_notice("Cannot enumerate AMD northbridges\n");
if (amd_cache_gart() < 0)
- printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, "
- "GART support disabled.\n");
+ pr_notice("Cannot initialize GART flush words, GART support disabled\n");
return err;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 5f0ff59..8704918 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -448,8 +448,8 @@ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pi
entry = alloc_irq_pin_list(node);
if (!entry) {
- printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
- node, apic, pin);
+ pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
+ node, apic, pin);
return -ENOMEM;
}
entry->apic = apic;
@@ -661,7 +661,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
ioapic_mask_entry(apic, pin);
entry = ioapic_read_entry(apic, pin);
if (entry.irr)
- printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n",
+ pr_err("Unable to reset IRR for apic: %d, pin :%d\n",
mpc_ioapic_id(apic), pin);
}
@@ -895,7 +895,7 @@ static int irq_polarity(int idx)
}
case 2: /* reserved */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
polarity = 1;
break;
}
@@ -906,7 +906,7 @@ static int irq_polarity(int idx)
}
default: /* invalid */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
polarity = 1;
break;
}
@@ -948,7 +948,7 @@ static int irq_trigger(int idx)
}
default:
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
trigger = 1;
break;
}
@@ -962,7 +962,7 @@ static int irq_trigger(int idx)
}
case 2: /* reserved */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
trigger = 1;
break;
}
@@ -973,7 +973,7 @@ static int irq_trigger(int idx)
}
default: /* invalid */
{
- printk(KERN_WARNING "broken BIOS!!\n");
+ pr_warn("broken BIOS!!\n");
trigger = 0;
break;
}
@@ -991,7 +991,7 @@ static int pin_2_irq(int idx, int apic, int pin)
* Debugging check, we are in big trouble if this message pops up!
*/
if (mp_irqs[idx].dstirq != pin)
- printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+ pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");
if (test_bit(bus, mp_bus_not_pci)) {
irq = mp_irqs[idx].srcbusirq;
@@ -1521,7 +1521,6 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
reg_03.raw = io_apic_read(ioapic_idx, 3);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
- printk("\n");
printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx));
printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID);
@@ -1578,7 +1577,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
i,
ir_entry->index
);
- printk("%1d %1d %1d %1d %1d "
+ pr_cont("%1d %1d %1d %1d %1d "
"%1d %1d %X %02X\n",
ir_entry->format,
ir_entry->mask,
@@ -1598,7 +1597,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
i,
entry.dest
);
- printk("%1d %1d %1d %1d %1d "
+ pr_cont("%1d %1d %1d %1d %1d "
"%1d %1d %02X\n",
entry.mask,
entry.trigger,
@@ -1651,8 +1650,8 @@ __apicdebuginit(void) print_IO_APICs(void)
continue;
printk(KERN_DEBUG "IRQ%d ", irq);
for_each_irq_pin(entry, cfg->irq_2_pin)
- printk("-> %d:%d", entry->apic, entry->pin);
- printk("\n");
+ pr_cont("-> %d:%d", entry->apic, entry->pin);
+ pr_cont("\n");
}
printk(KERN_INFO ".................................... done.\n");
@@ -1665,9 +1664,9 @@ __apicdebuginit(void) print_APIC_field(int base)
printk(KERN_DEBUG);
for (i = 0; i < 8; i++)
- printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+ pr_cont("%08x", apic_read(base + i*0x10));
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
__apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1769,7 +1768,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
}
}
- printk("\n");
+ pr_cont("\n");
}
__apicdebuginit(void) print_local_APICs(int maxcpu)
@@ -2065,7 +2064,7 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void)
reg_00.raw = io_apic_read(ioapic_idx, 0);
raw_spin_unlock_irqrestore(&ioapic_lock, flags);
if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx))
- printk("could not set ID!\n");
+ pr_cont("could not set ID!\n");
else
apic_printk(APIC_VERBOSE, " ok.\n");
}
@@ -3563,7 +3562,8 @@ static int __init io_apic_get_unique_id(int ioapic, int apic_id)
/* Sanity check */
if (reg_00.bits.ID != apic_id) {
- printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+ pr_err("IOAPIC[%d]: Unable to change apic_id!\n",
+ ioapic);
return -1;
}
}
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 659897c..e97d542 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -26,6 +26,8 @@
*
*/
+#define pr_fmt(fmt) "summit: %s: " fmt, __func__
+
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/io.h>
@@ -235,8 +237,8 @@ static int summit_apic_id_registered(void)
static void summit_setup_apic_routing(void)
{
- printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
- nr_ioapics);
+ pr_info("Enabling APIC mode: Summit. Using %d I/O APICs\n",
+ nr_ioapics);
}
static int summit_cpu_present_to_apicid(int mps_cpu)
@@ -275,7 +277,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
- printk("%s: Not a valid mask!\n", __func__);
+ pr_err("Not a valid mask!\n");
return BAD_APICID;
}
apicid |= new_apicid;
@@ -355,7 +357,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
}
}
if (i == rio_table_hdr->num_rio_dev) {
- printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
+ pr_err("Couldn't find owner Cyclone for Winnipeg!\n");
return last_bus;
}
@@ -366,7 +368,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
}
}
if (i == rio_table_hdr->num_scal_dev) {
- printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
+ pr_err("Couldn't find owner Twister for Cyclone!\n");
return last_bus;
}
@@ -396,7 +398,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
num_buses = 9;
break;
default:
- printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
+ pr_info("Unsupported Winnipeg type!\n");
return last_bus;
}
@@ -411,13 +413,15 @@ static int build_detail_arrays(void)
int i, scal_detail_size, rio_detail_size;
if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
- printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ pr_warn("MAX_NUMNODES too low! Defined as %d, but system has %d nodes\n",
+ MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
switch (rio_table_hdr->version) {
default:
- printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
+ pr_warn("Invalid Rio Grande Table Version: %d\n",
+ rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
@@ -462,7 +466,7 @@ void setup_summit(void)
offset = *((unsigned short *)(ptr + offset));
}
if (!rio_table_hdr) {
- printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
+ pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n");
return;
}
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 07b0c0d..d65464e 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -201,6 +201,8 @@
* http://www.microsoft.com/whdc/archive/amp_12.mspx]
*/
+#define pr_fmt(fmt) "apm: " fmt
+
#include <linux/module.h>
#include <linux/poll.h>
@@ -485,11 +487,11 @@ static void apm_error(char *str, int err)
if (error_table[i].key == err)
break;
if (i < ERROR_COUNT)
- printk(KERN_NOTICE "apm: %s: %s\n", str, error_table[i].msg);
+ pr_notice("%s: %s\n", str, error_table[i].msg);
else if (err < 0)
- printk(KERN_NOTICE "apm: %s: linux error code %i\n", str, err);
+ pr_notice("%s: linux error code %i\n", str, err);
else
- printk(KERN_NOTICE "apm: %s: unknown error code %#2.2x\n",
+ pr_notice("%s: unknown error code %#2.2x\n",
str, err);
}
@@ -1184,7 +1186,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender)
static int notified;
if (notified++ == 0)
- printk(KERN_ERR "apm: an event queue overflowed\n");
+ pr_err("an event queue overflowed\n");
if (++as->event_tail >= APM_MAX_EVENTS)
as->event_tail = 0;
}
@@ -1447,7 +1449,7 @@ static void apm_mainloop(void)
static int check_apm_user(struct apm_user *as, const char *func)
{
if (as == NULL || as->magic != APM_BIOS_MAGIC) {
- printk(KERN_ERR "apm: %s passed bad filp\n", func);
+ pr_err("%s passed bad filp\n", func);
return 1;
}
return 0;
@@ -1586,7 +1588,7 @@ static int do_release(struct inode *inode, struct file *filp)
as1 = as1->next)
;
if (as1 == NULL)
- printk(KERN_ERR "apm: filp not in user list\n");
+ pr_err("filp not in user list\n");
else
as1->next = as->next;
}
@@ -1600,11 +1602,9 @@ static int do_open(struct inode *inode, struct file *filp)
struct apm_user *as;
as = kmalloc(sizeof(*as), GFP_KERNEL);
- if (as == NULL) {
- printk(KERN_ERR "apm: cannot allocate struct of size %d bytes\n",
- sizeof(*as));
+ if (as == NULL)
return -ENOMEM;
- }
+
as->magic = APM_BIOS_MAGIC;
as->event_tail = as->event_head = 0;
as->suspends_pending = as->standbys_pending = 0;
@@ -2313,16 +2313,16 @@ static int __init apm_init(void)
}
if (apm_info.disabled) {
- printk(KERN_NOTICE "apm: disabled on user request.\n");
+ pr_notice("disabled on user request.\n");
return -ENODEV;
}
if ((num_online_cpus() > 1) && !power_off && !smp) {
- printk(KERN_NOTICE "apm: disabled - APM is not SMP safe.\n");
+ pr_notice("disabled - APM is not SMP safe.\n");
apm_info.disabled = 1;
return -ENODEV;
}
if (!acpi_disabled) {
- printk(KERN_NOTICE "apm: overridden by ACPI.\n");
+ pr_notice("overridden by ACPI.\n");
apm_info.disabled = 1;
return -ENODEV;
}
@@ -2356,8 +2356,7 @@ static int __init apm_init(void)
kapmd_task = kthread_create(apm, NULL, "kapmd");
if (IS_ERR(kapmd_task)) {
- printk(KERN_ERR "apm: disabled - Unable to start kernel "
- "thread.\n");
+ pr_err("disabled - Unable to start kernel thread\n");
err = PTR_ERR(kapmd_task);
kapmd_task = NULL;
remove_proc_entry("apm", NULL);
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 46674fb..c97bb7b 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -55,8 +55,8 @@ static void __init check_fpu(void)
if (!boot_cpu_data.hard_math) {
#ifndef CONFIG_MATH_EMULATION
- printk(KERN_EMERG "No coprocessor found and no math emulation present.\n");
- printk(KERN_EMERG "Giving up.\n");
+ pr_emerg("No coprocessor found and no math emulation present\n");
+ pr_emerg("Giving up\n");
for (;;) ;
#endif
return;
@@ -86,7 +86,7 @@ static void __init check_fpu(void)
boot_cpu_data.fdiv_bug = fdiv_bug;
if (boot_cpu_data.fdiv_bug)
- printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");
+ pr_warn("Hmm, FPU with FDIV bug\n");
}
static void __init check_hlt(void)
@@ -94,16 +94,16 @@ static void __init check_hlt(void)
if (boot_cpu_data.x86 >= 5 || paravirt_enabled())
return;
- printk(KERN_INFO "Checking 'hlt' instruction... ");
+ pr_info("Checking 'hlt' instruction... ");
if (!boot_cpu_data.hlt_works_ok) {
- printk("disabled\n");
+ pr_cont("disabled\n");
return;
}
halt();
halt();
halt();
halt();
- printk(KERN_CONT "OK.\n");
+ pr_cont("OK\n");
}
/*
@@ -116,7 +116,7 @@ static void __init check_popad(void)
#ifndef CONFIG_X86_POPAD_OK
int res, inp = (int) &res;
- printk(KERN_INFO "Checking for popad bug... ");
+ pr_info("Checking for popad bug... ");
__asm__ __volatile__(
"movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx "
: "=&a" (res)
@@ -127,9 +127,9 @@ static void __init check_popad(void)
* CPU hard. Too bad.
*/
if (res != 12345678)
- printk(KERN_CONT "Buggy.\n");
+ pr_cont("Buggy\n");
else
- printk(KERN_CONT "OK.\n");
+ pr_cont("OK\n");
#endif
}
@@ -161,7 +161,7 @@ void __init check_bugs(void)
{
identify_boot_cpu();
#ifndef CONFIG_SMP
- printk(KERN_INFO "CPU: ");
+ pr_info("CPU: ");
print_cpu_info(&boot_cpu_data);
#endif
check_config();
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index da27c5d..5a5a5dc 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -7,6 +7,9 @@
* Copyright 2008 Intel Corporation
* Author: Andi Kleen
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/thread_info.h>
#include <linux/capability.h>
#include <linux/miscdevice.h>
@@ -210,7 +213,7 @@ static void drain_mcelog_buffer(void)
cpu_relax();
if (!m->finished && retries >= 4) {
- pr_err("MCE: skipping error being logged currently!\n");
+ pr_err("skipping error being logged currently!\n");
break;
}
}
@@ -1167,8 +1170,9 @@ int memory_failure(unsigned long pfn, int vector, int flags)
{
/* mce_severity() should not hand us an ACTION_REQUIRED error */
BUG_ON(flags & MF_ACTION_REQUIRED);
- printk(KERN_ERR "Uncorrected memory error in page 0x%lx ignored\n"
- "Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n", pfn);
+ pr_err("Uncorrected memory error in page 0x%lx ignored\n"
+ "Rebuild kernel with CONFIG_MEMORY_FAILURE=y for smarter handling\n",
+ pfn);
return 0;
}
@@ -1358,11 +1362,10 @@ static int __cpuinit __mcheck_cpu_cap_init(void)
b = cap & MCG_BANKCNT_MASK;
if (!banks)
- printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+ pr_info("CPU supports %d MCE banks\n", b);
if (b > MAX_NR_BANKS) {
- printk(KERN_WARNING
- "MCE: Using only %u machine check banks out of %u\n",
+ pr_warn("Using only %u machine check banks out of %u\n",
MAX_NR_BANKS, b);
b = MAX_NR_BANKS;
}
@@ -1419,7 +1422,7 @@ static void __mcheck_cpu_init_generic(void)
static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
{
if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
- pr_info("MCE: unknown CPU type - not enabling MCE support.\n");
+ pr_info("unknown CPU type - not enabling MCE support\n");
return -EOPNOTSUPP;
}
@@ -1574,7 +1577,7 @@ static void __mcheck_cpu_init_timer(void)
/* Handle unconfigured int18 (should never happen) */
static void unexpected_machine_check(struct pt_regs *regs, long error_code)
{
- printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n",
+ pr_err("CPU#%d: Unexpected int18 (Machine Check)\n",
smp_processor_id());
}
@@ -1893,8 +1896,7 @@ static int __init mcheck_enable(char *str)
get_option(&str, &monarch_timeout);
}
} else {
- printk(KERN_INFO "mce argument %s ignored. Please use /sys\n",
- str);
+ pr_info("mce argument %s ignored. Please use /sys\n", str);
return 0;
}
return 1;
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 187c294..5073bf1 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -5,6 +5,8 @@
* among events on a single PMU.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -1000,7 +1002,7 @@ static void intel_pmu_reset(void)
local_irq_save(flags);
- printk("clearing PMU state on CPU#%d\n", smp_processor_id());
+ pr_info("clearing PMU state on CPU#%d\n", smp_processor_id());
for (idx = 0; idx < x86_pmu.num_counters; idx++) {
checking_wrmsrl(x86_pmu_config_addr(idx), 0ull);
@@ -1707,14 +1709,14 @@ static __init void intel_clovertown_quirk(void)
* But taken together it might just make sense to not enable PEBS on
* these chips.
*/
- printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
+ pr_warn("PEBS disabled due to CPU errata\n");
x86_pmu.pebs = 0;
x86_pmu.pebs_constraints = NULL;
}
static __init void intel_sandybridge_quirk(void)
{
- printk(KERN_WARNING "PEBS disabled due to CPU errata.\n");
+ pr_warn("PEBS disabled due to CPU errata\n");
x86_pmu.pebs = 0;
x86_pmu.pebs_constraints = NULL;
}
@@ -1736,8 +1738,8 @@ static __init void intel_arch_events_quirk(void)
/* disable event that reported as not presend by cpuid */
for_each_set_bit(bit, x86_pmu.events_mask, ARRAY_SIZE(intel_arch_events_map)) {
intel_perfmon_event_map[intel_arch_events_map[bit].id] = 0;
- printk(KERN_WARNING "CPUID marked event: \'%s\' unavailable\n",
- intel_arch_events_map[bit].name);
+ pr_warn("CPUID marked event: \'%s\' unavailable\n",
+ intel_arch_events_map[bit].name);
}
}
@@ -1756,7 +1758,7 @@ static __init void intel_nehalem_quirk(void)
intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
ebx.split.no_branch_misses_retired = 0;
x86_pmu.events_maskl = ebx.full;
- printk(KERN_INFO "CPU erratum AAJ80 worked around\n");
+ pr_info("CPU erratum AAJ80 worked around\n");
}
}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 571246d..ae42418b 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -27,8 +27,8 @@ static int die_counter;
void printk_address(unsigned long address, int reliable)
{
- printk(" [<%p>] %s%pB\n", (void *) address,
- reliable ? "" : "? ", (void *) address);
+ pr_cont(" [<%p>] %s%pB\n",
+ (void *)address, reliable ? "" : "? ", (void *)address);
}
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
@@ -271,6 +271,7 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
return 1;
+ print_modules();
show_regs(regs);
#ifdef CONFIG_X86_32
if (user_mode_vm(regs)) {
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index e0b1d78..1038a41 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -73,11 +73,11 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
if (kstack_end(stack))
break;
if (i && ((i % STACKSLOTS_PER_LINE) == 0))
- printk(KERN_CONT "\n");
- printk(KERN_CONT " %08lx", *stack++);
+ pr_cont("\n");
+ pr_cont(" %08lx", *stack++);
touch_nmi_watchdog();
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
@@ -86,12 +86,11 @@ void show_regs(struct pt_regs *regs)
{
int i;
- print_modules();
__show_regs(regs, !user_mode_vm(regs));
- printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
- TASK_COMM_LEN, current->comm, task_pid_nr(current),
- current_thread_info(), current, task_thread_info(current));
+ pr_emerg("Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)\n",
+ TASK_COMM_LEN, current->comm, task_pid_nr(current),
+ current_thread_info(), current, task_thread_info(current));
/*
* When in-kernel, we also print out the stack and code at the
* time of the fault..
@@ -102,10 +101,10 @@ void show_regs(struct pt_regs *regs)
unsigned char c;
u8 *ip;
- printk(KERN_EMERG "Stack:\n");
+ pr_emerg("Stack:\n");
show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG);
- printk(KERN_EMERG "Code: ");
+ pr_emerg("Code:");
ip = (u8 *)regs->ip - code_prologue;
if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
@@ -116,16 +115,16 @@ void show_regs(struct pt_regs *regs)
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(KERN_CONT " Bad EIP value.");
+ pr_cont(" Bad EIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk(KERN_CONT "<%02x> ", c);
+ pr_cont(" <%02x>", c);
else
- printk(KERN_CONT "%02x ", c);
+ pr_cont(" %02x", c);
}
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 791b761..b653675 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -228,20 +228,20 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
if (stack >= irq_stack && stack <= irq_stack_end) {
if (stack == irq_stack_end) {
stack = (unsigned long *) (irq_stack_end[-1]);
- printk(KERN_CONT " <EOI> ");
+ pr_cont(" <EOI> ");
}
} else {
if (((long) stack & (THREAD_SIZE-1)) == 0)
break;
}
if (i && ((i % STACKSLOTS_PER_LINE) == 0))
- printk(KERN_CONT "\n");
- printk(KERN_CONT " %016lx", *stack++);
+ pr_cont("\n");
+ pr_cont(" %016lx", *stack++);
touch_nmi_watchdog();
}
preempt_enable();
- printk(KERN_CONT "\n");
+ pr_cont("\n");
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
@@ -254,10 +254,9 @@ void show_regs(struct pt_regs *regs)
sp = regs->sp;
printk("CPU %d ", cpu);
- print_modules();
__show_regs(regs, 1);
- printk("Process %s (pid: %d, threadinfo %p, task %p)\n",
- cur->comm, cur->pid, task_thread_info(cur), cur);
+ printk(KERN_DEFAULT "Process %s (pid: %d, threadinfo %p, task %p)\n",
+ cur->comm, cur->pid, task_thread_info(cur), cur);
/*
* When in-kernel, we also print out the stack and code at the
@@ -284,16 +283,16 @@ void show_regs(struct pt_regs *regs)
for (i = 0; i < code_len; i++, ip++) {
if (ip < (u8 *)PAGE_OFFSET ||
probe_kernel_address(ip, c)) {
- printk(KERN_CONT " Bad RIP value.");
+ pr_cont(" Bad RIP value.");
break;
}
if (ip == (u8 *)regs->ip)
- printk(KERN_CONT "<%02x> ", c);
+ pr_cont("<%02x> ", c);
else
- printk(KERN_CONT "%02x ", c);
+ pr_cont("%02x ", c);
}
}
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
int is_valid_bugaddr(unsigned long ip)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 7d65133..111f6bb 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -1758,10 +1758,30 @@ end_repeat_nmi:
*/
call save_paranoid
DEFAULT_FRAME 0
+
+ /*
+ * Save off the CR2 register. If we take a page fault in the NMI then
+ * it could corrupt the CR2 value. If the NMI preempts a page fault
+ * handler before it was able to read the CR2 register, and then the
+ * NMI itself takes a page fault, the page fault that was preempted
+ * will read the information from the NMI page fault and not the
+ * origin fault. Save it off and restore it if it changes.
+ * Use the r12 callee-saved register.
+ */
+ movq %cr2, %r12
+
/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
movq %rsp,%rdi
movq $-1,%rsi
call do_nmi
+
+ /* Did the NMI take a page fault? Restore cr2 if it did */
+ movq %cr2, %rcx
+ cmpq %rcx, %r12
+ je 1f
+ movq %r12, %cr2
+1:
+
testl %ebx,%ebx /* swapgs needed? */
jnz nmi_restore
nmi_swapgs:
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3dafc60..1f5f1d5 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -294,9 +294,9 @@ void fixup_irqs(void)
raw_spin_unlock(&desc->lock);
if (break_affinity && set_affinity)
- printk("Broke affinity for irq %i\n", irq);
+ pr_notice("Broke affinity for irq %i\n", irq);
else if (!set_affinity)
- printk("Cannot set affinity for irq %i\n", irq);
+ pr_notice("Cannot set affinity for irq %i\n", irq);
}
/*
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index fbdfc69..c383b3f 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -504,7 +504,7 @@ static struct notifier_block __refdata mc_cpu_notifier = {
#ifdef MODULE
/* Autoload on Intel and AMD systems */
-static const struct x86_cpu_id microcode_id[] = {
+static const struct x86_cpu_id __initconst microcode_id[] = {
#ifdef CONFIG_MICROCODE_INTEL
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
#endif
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index f21fd94..202494d 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -15,6 +15,9 @@
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/moduleloader.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
@@ -30,9 +33,14 @@
#include <asm/pgtable.h>
#if 0
-#define DEBUGP printk
+#define DEBUGP(fmt, ...) \
+ printk(KERN_DEBUG fmt, ##__VA_ARGS__)
#else
-#define DEBUGP(fmt...)
+#define DEBUGP(fmt, ...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
+} while (0)
#endif
void *module_alloc(unsigned long size)
@@ -56,8 +64,8 @@ int apply_relocate(Elf32_Shdr *sechdrs,
Elf32_Sym *sym;
uint32_t *location;
- DEBUGP("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -77,7 +85,7 @@ int apply_relocate(Elf32_Shdr *sechdrs,
*location += sym->st_value - (uint32_t)location;
break;
default:
- printk(KERN_ERR "module %s: Unknown relocation: %u\n",
+ pr_err("%s: Unknown relocation: %u\n",
me->name, ELF32_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
@@ -97,8 +105,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
void *loc;
u64 val;
- DEBUGP("Applying relocate section %u to %u\n", relsec,
- sechdrs[relsec].sh_info);
+ DEBUGP("Applying relocate section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
/* This is where to make the change */
loc = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
@@ -110,8 +118,8 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
+ ELF64_R_SYM(rel[i].r_info);
DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n",
- (int)ELF64_R_TYPE(rel[i].r_info),
- sym->st_value, rel[i].r_addend, (u64)loc);
+ (int)ELF64_R_TYPE(rel[i].r_info),
+ sym->st_value, rel[i].r_addend, (u64)loc);
val = sym->st_value + rel[i].r_addend;
@@ -140,7 +148,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
#endif
break;
default:
- printk(KERN_ERR "module %s: Unknown rela relocation: %llu\n",
+ pr_err("%s: Unknown rela relocation: %llu\n",
me->name, ELF64_R_TYPE(rel[i].r_info));
return -ENOEXEC;
}
@@ -148,9 +156,9 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
return 0;
overflow:
- printk(KERN_ERR "overflow in relocation type %d val %Lx\n",
+ pr_err("overflow in relocation type %d val %Lx\n",
(int)ELF64_R_TYPE(rel[i].r_info), val);
- printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n",
+ pr_err("`%s' likely not compiled with -mcmodel=kernel\n",
me->name);
return -ENOEXEC;
}
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index a0b2f84..f84f5c5 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -365,8 +365,9 @@ static __kprobes void default_do_nmi(struct pt_regs *regs)
#ifdef CONFIG_X86_32
/*
* For i386, NMIs use the same stack as the kernel, and we can
- * add a workaround to the iret problem in C. Simply have 3 states
- * the NMI can be in.
+ * add a workaround to the iret problem in C (preventing nested
+ * NMIs if an NMI takes a trap). Simply have 3 states the NMI
+ * can be in:
*
* 1) not running
* 2) executing
@@ -383,32 +384,50 @@ static __kprobes void default_do_nmi(struct pt_regs *regs)
* If an NMI hits a breakpoint that executes an iret, another
* NMI can preempt it. We do not want to allow this new NMI
* to run, but we want to execute it when the first one finishes.
- * We set the state to "latched", and the first NMI will perform
- * an cmpxchg on the state, and if it doesn't successfully
- * reset the state to "not running" it will restart the next
- * NMI.
+ * We set the state to "latched", and the exit of the first NMI will
+ * perform a dec_return, if the result is zero (NOT_RUNNING), then
+ * it will simply exit the NMI handler. If not, the dec_return
+ * would have set the state to NMI_EXECUTING (what we want it to
+ * be when we are running). In this case, we simply jump back
+ * to rerun the NMI handler again, and restart the 'latched' NMI.
+ *
+ * No trap (breakpoint or page fault) should be hit before nmi_restart,
+ * thus there is no race between the first check of state for NOT_RUNNING
+ * and setting it to NMI_EXECUTING. The HW will prevent nested NMIs
+ * at this point.
+ *
+ * In case the NMI takes a page fault, we need to save off the CR2
+ * because the NMI could have preempted another page fault and corrupt
+ * the CR2 that is about to be read. As nested NMIs must be restarted
+ * and they can not take breakpoints or page faults, the update of the
+ * CR2 must be done before converting the nmi state back to NOT_RUNNING.
+ * Otherwise, there would be a race of another nested NMI coming in
+ * after setting state to NOT_RUNNING but before updating the nmi_cr2.
*/
enum nmi_states {
- NMI_NOT_RUNNING,
+ NMI_NOT_RUNNING = 0,
NMI_EXECUTING,
NMI_LATCHED,
};
static DEFINE_PER_CPU(enum nmi_states, nmi_state);
+static DEFINE_PER_CPU(unsigned long, nmi_cr2);
#define nmi_nesting_preprocess(regs) \
do { \
- if (__get_cpu_var(nmi_state) != NMI_NOT_RUNNING) { \
- __get_cpu_var(nmi_state) = NMI_LATCHED; \
+ if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) { \
+ this_cpu_write(nmi_state, NMI_LATCHED); \
return; \
} \
- nmi_restart: \
- __get_cpu_var(nmi_state) = NMI_EXECUTING; \
- } while (0)
+ this_cpu_write(nmi_state, NMI_EXECUTING); \
+ this_cpu_write(nmi_cr2, read_cr2()); \
+ } while (0); \
+ nmi_restart:
#define nmi_nesting_postprocess() \
do { \
- if (cmpxchg(&__get_cpu_var(nmi_state), \
- NMI_EXECUTING, NMI_NOT_RUNNING) != NMI_EXECUTING) \
+ if (unlikely(this_cpu_read(nmi_cr2) != read_cr2())) \
+ write_cr2(this_cpu_read(nmi_cr2)); \
+ if (this_cpu_dec_return(nmi_state)) \
goto nmi_restart; \
} while (0)
#else /* x86_64 */
diff --git a/arch/x86/kernel/nmi_selftest.c b/arch/x86/kernel/nmi_selftest.c
index 149b8d9..6d9582e 100644
--- a/arch/x86/kernel/nmi_selftest.c
+++ b/arch/x86/kernel/nmi_selftest.c
@@ -42,7 +42,8 @@ static int __init nmi_unk_cb(unsigned int val, struct pt_regs *regs)
static void __init init_nmi_testsuite(void)
{
/* trap all the unknown NMIs we may generate */
- register_nmi_handler_initonly(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
+ register_nmi_handler(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk",
+ __initdata);
}
static void __init cleanup_nmi_testsuite(void)
@@ -64,8 +65,8 @@ static void __init test_nmi_ipi(struct cpumask *mask)
{
unsigned long timeout;
- if (register_nmi_handler_initonly(NMI_LOCAL, test_nmi_ipi_callback,
- NMI_FLAG_FIRST, "nmi_selftest")) {
+ if (register_nmi_handler(NMI_LOCAL, test_nmi_ipi_callback,
+ NMI_FLAG_FIRST, "nmi_selftest", __initdata)) {
nmi_fail = FAILURE;
return;
}
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index b72838b..299d493 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -22,6 +22,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#define pr_fmt(fmt) "Calgary: " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
@@ -245,7 +247,7 @@ static unsigned long iommu_range_alloc(struct device *dev,
offset = iommu_area_alloc(tbl->it_map, tbl->it_size, 0,
npages, 0, boundary_size, 0);
if (offset == ~0UL) {
- printk(KERN_WARNING "Calgary: IOMMU full.\n");
+ pr_warn("IOMMU full\n");
spin_unlock_irqrestore(&tbl->it_lock, flags);
if (panic_on_overflow)
panic("Calgary: fix the allocator.\n");
@@ -271,8 +273,8 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
entry = iommu_range_alloc(dev, tbl, npages);
if (unlikely(entry == DMA_ERROR_CODE)) {
- printk(KERN_WARNING "Calgary: failed to allocate %u pages in "
- "iommu %p\n", npages, tbl);
+ pr_warn("failed to allocate %u pages in iommu %p\n",
+ npages, tbl);
return DMA_ERROR_CODE;
}
@@ -561,8 +563,7 @@ static void calgary_tce_cache_blast(struct iommu_table *tbl)
i++;
} while ((val & 0xff) != 0xff && i < 100);
if (i == 100)
- printk(KERN_WARNING "Calgary: PCI bus not quiesced, "
- "continuing anyway\n");
+ pr_warn("PCI bus not quiesced, continuing anyway\n");
/* invalidate TCE cache */
target = calgary_reg(bbar, tar_offset(tbl->it_busno));
@@ -604,8 +605,7 @@ begin:
i++;
} while ((val64 & 0xff) != 0xff && i < 100);
if (i == 100)
- printk(KERN_WARNING "CalIOC2: PCI bus not quiesced, "
- "continuing anyway\n");
+ pr_warn("CalIOC2: PCI bus not quiesced, continuing anyway\n");
/* 3. poll Page Migration DEBUG for SoftStopFault */
target = calgary_reg(bbar, phb_offset(bus) | PHB_PAGE_MIG_DEBUG);
@@ -617,8 +617,7 @@ begin:
if (++count < 100)
goto begin;
else {
- printk(KERN_WARNING "CalIOC2: too many SoftStopFaults, "
- "aborting TCE cache flush sequence!\n");
+ pr_warn("CalIOC2: too many SoftStopFaults, aborting TCE cache flush sequence!\n");
return; /* pray for the best */
}
}
@@ -840,8 +839,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl)
plssr = be32_to_cpu(readl(target));
/* If no error, the agent ID in the CSR is not valid */
- printk(KERN_EMERG "Calgary: DMA error on Calgary PHB 0x%x, "
- "0x%08x@CSR 0x%08x@PLSSR\n", tbl->it_busno, csr, plssr);
+ pr_emerg("DMA error on Calgary PHB 0x%x, 0x%08x@CSR 0x%08x@PLSSR\n",
+ tbl->it_busno, csr, plssr);
}
static void calioc2_dump_error_regs(struct iommu_table *tbl)
@@ -867,22 +866,21 @@ static void calioc2_dump_error_regs(struct iommu_table *tbl)
target = calgary_reg(bbar, phboff | 0x800);
mck = be32_to_cpu(readl(target));
- printk(KERN_EMERG "Calgary: DMA error on CalIOC2 PHB 0x%x\n",
- tbl->it_busno);
+ pr_emerg("DMA error on CalIOC2 PHB 0x%x\n", tbl->it_busno);
- printk(KERN_EMERG "Calgary: 0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
- csr, plssr, csmr, mck);
+ pr_emerg("0x%08x@CSR 0x%08x@PLSSR 0x%08x@CSMR 0x%08x@MCK\n",
+ csr, plssr, csmr, mck);
/* dump rest of error regs */
- printk(KERN_EMERG "Calgary: ");
+ pr_emerg("");
for (i = 0; i < ARRAY_SIZE(errregs); i++) {
/* err regs are at 0x810 - 0x870 */
erroff = (0x810 + (i * 0x10));
target = calgary_reg(bbar, phboff | erroff);
errregs[i] = be32_to_cpu(readl(target));
- printk("0x%08x@0x%lx ", errregs[i], erroff);
+ pr_cont("0x%08x@0x%lx ", errregs[i], erroff);
}
- printk("\n");
+ pr_cont("\n");
/* root complex status */
target = calgary_reg(bbar, phboff | PHB_ROOT_COMPLEX_STATUS);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 735279e..ef6a845 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/mm.h>
@@ -145,16 +147,14 @@ void show_regs_common(void)
/* Board Name is optional */
board = dmi_get_system_info(DMI_BOARD_NAME);
- printk(KERN_CONT "\n");
- printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s",
- current->pid, current->comm, print_tainted(),
- init_utsname()->release,
- (int)strcspn(init_utsname()->version, " "),
- init_utsname()->version);
- printk(KERN_CONT " %s %s", vendor, product);
- if (board)
- printk(KERN_CONT "/%s", board);
- printk(KERN_CONT "\n");
+ printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s %s%s%s\n",
+ current->pid, current->comm, print_tainted(),
+ init_utsname()->release,
+ (int)strcspn(init_utsname()->version, " "),
+ init_utsname()->version,
+ vendor, product,
+ board ? "/" : "",
+ board ? board : "");
}
void flush_thread(void)
@@ -645,7 +645,7 @@ static void amd_e400_idle(void)
amd_e400_c1e_detected = true;
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halt in AMD C1E");
- printk(KERN_INFO "System has AMD C1E enabled\n");
+ pr_info("System has AMD C1E enabled\n");
}
}
@@ -659,8 +659,7 @@ static void amd_e400_idle(void)
*/
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
&cpu);
- printk(KERN_INFO "Switch to broadcast mode on CPU%d\n",
- cpu);
+ pr_info("Switch to broadcast mode on CPU%d\n", cpu);
}
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
@@ -681,8 +680,7 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
if (pm_idle == poll_idle && smp_num_siblings > 1) {
- printk_once(KERN_WARNING "WARNING: polling idle and HT enabled,"
- " performance may degrade.\n");
+ pr_warn_once("WARNING: polling idle and HT enabled, performance may degrade\n");
}
#endif
if (pm_idle)
@@ -692,11 +690,11 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
/*
* One CPU supports mwait => All CPUs supports mwait
*/
- printk(KERN_INFO "using mwait in idle threads.\n");
+ pr_info("using mwait in idle threads\n");
pm_idle = mwait_idle;
} else if (cpu_has_amd_erratum(amd_erratum_400)) {
/* E400: APIC timer interrupt does not wake up CPU from C1e */
- printk(KERN_INFO "using AMD E400 aware idle routine\n");
+ pr_info("using AMD E400 aware idle routine\n");
pm_idle = amd_e400_idle;
} else
pm_idle = default_idle;
@@ -715,7 +713,7 @@ static int __init idle_setup(char *str)
return -EINVAL;
if (!strcmp(str, "poll")) {
- printk("using polling idle threads.\n");
+ pr_info("using polling idle threads\n");
pm_idle = poll_idle;
boot_option_idle_override = IDLE_POLL;
} else if (!strcmp(str, "mwait")) {
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 61cdf7f..85151f3 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -117,10 +117,10 @@ void release_thread(struct task_struct *dead_task)
{
if (dead_task->mm) {
if (dead_task->mm->context.size) {
- printk("WARNING: dead process %8s still has LDT? <%p/%d>\n",
- dead_task->comm,
- dead_task->mm->context.ldt,
- dead_task->mm->context.size);
+ pr_warn("WARNING: dead process %8s still has LDT? <%p/%d>\n",
+ dead_task->comm,
+ dead_task->mm->context.ldt,
+ dead_task->mm->context.size);
BUG();
}
}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 25b48ed..10ae9be 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/init.h>
@@ -152,7 +154,8 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_BIOS) {
reboot_type = BOOT_BIOS;
- printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident);
+ pr_info("%s series board detected. Selecting %s-method for reboots.\n",
+ "BIOS", d->ident);
}
return 0;
}
@@ -207,8 +210,8 @@ static int __init set_pci_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_CF9) {
reboot_type = BOOT_CF9;
- printk(KERN_INFO "%s series board detected. "
- "Selecting PCI-method for reboots.\n", d->ident);
+ pr_info("%s series board detected. Selecting %s-method for reboots.\n",
+ "PCI", d->ident);
}
return 0;
}
@@ -217,7 +220,8 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d)
{
if (reboot_type != BOOT_KBD) {
reboot_type = BOOT_KBD;
- printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident);
+ pr_info("%s series board detected. Selecting %s-method for reboot.\n",
+ "KBD", d->ident);
}
return 0;
}
@@ -670,7 +674,7 @@ static void __machine_emergency_restart(int emergency)
static void native_machine_restart(char *__unused)
{
- printk("machine restart\n");
+ pr_notice("machine restart\n");
if (!reboot_force)
machine_shutdown();
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 21af737..b280908 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -6,6 +6,9 @@
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
* 2000-2002 x86-64 support by Andi Kleen
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/smp.h>
@@ -814,7 +817,7 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
me->comm, me->pid, where, frame,
regs->ip, regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
force_sig(SIGSEGV, me);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 7bd8a08..54e938d 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1,4 +1,4 @@
-/*
+ /*
* x86 SMP booting functions
*
* (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
@@ -39,6 +39,8 @@
* Glauber Costa : i386 and x86_64 integration
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/module.h>
@@ -184,7 +186,7 @@ static void __cpuinit smp_callin(void)
* boards)
*/
- pr_debug("CALLIN, before setup_local_APIC().\n");
+ pr_debug("CALLIN, before setup_local_APIC()\n");
if (apic->smp_callin_clear_local_apic)
apic->smp_callin_clear_local_apic();
setup_local_APIC();
@@ -432,17 +434,16 @@ static void impress_friends(void)
/*
* Allow the user to impress friends.
*/
- pr_debug("Before bogomips.\n");
+ pr_debug("Before bogomips\n");
for_each_possible_cpu(cpu)
if (cpumask_test_cpu(cpu, cpu_callout_mask))
bogosum += cpu_data(cpu).loops_per_jiffy;
- printk(KERN_INFO
- "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+ pr_info("Total of %d processors activated (%lu.%02lu BogoMIPS)\n",
num_online_cpus(),
bogosum/(500000/HZ),
(bogosum/(5000/HZ))%100);
- pr_debug("Before bogocount - setting activated=1.\n");
+ pr_debug("Before bogocount - setting activated=1\n");
}
void __inquire_remote_apic(int apicid)
@@ -452,18 +453,17 @@ void __inquire_remote_apic(int apicid)
int timeout;
u32 status;
- printk(KERN_INFO "Inquiring remote APIC 0x%x...\n", apicid);
+ pr_info("Inquiring remote APIC 0x%x...\n", apicid);
for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk(KERN_INFO "... APIC 0x%x %s: ", apicid, names[i]);
+ pr_info("... APIC 0x%x %s: ", apicid, names[i]);
/*
* Wait for idle.
*/
status = safe_apic_wait_icr_idle();
if (status)
- printk(KERN_CONT
- "a previous APIC delivery may have failed\n");
+ pr_cont("a previous APIC delivery may have failed\n");
apic_icr_write(APIC_DM_REMRD | regs[i], apicid);
@@ -476,10 +476,10 @@ void __inquire_remote_apic(int apicid)
switch (status) {
case APIC_ICR_RR_VALID:
status = apic_read(APIC_RRR);
- printk(KERN_CONT "%08x\n", status);
+ pr_cont("%08x\n", status);
break;
default:
- printk(KERN_CONT "failed\n");
+ pr_cont("failed\n");
}
}
}
@@ -513,12 +513,12 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
apic_write(APIC_ESR, 0);
accept_status = (apic_read(APIC_ESR) & 0xEF);
}
- pr_debug("NMI sent.\n");
+ pr_debug("NMI sent\n");
if (send_status)
- printk(KERN_ERR "APIC never delivered???\n");
+ pr_err("APIC never delivered???\n");
if (accept_status)
- printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
+ pr_err("APIC delivery error (%lx)\n", accept_status);
return (send_status | accept_status);
}
@@ -540,7 +540,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
apic_read(APIC_ESR);
}
- pr_debug("Asserting INIT.\n");
+ pr_debug("Asserting INIT\n");
/*
* Turn INIT on target chip
@@ -556,7 +556,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
mdelay(10);
- pr_debug("Deasserting INIT.\n");
+ pr_debug("Deasserting INIT\n");
/* Target chip */
/* Send IPI */
@@ -589,14 +589,14 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
/*
* Run STARTUP IPI loop.
*/
- pr_debug("#startup loops: %d.\n", num_starts);
+ pr_debug("#startup loops: %d\n", num_starts);
for (j = 1; j <= num_starts; j++) {
- pr_debug("Sending STARTUP #%d.\n", j);
+ pr_debug("Sending STARTUP #%d\n", j);
if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
- pr_debug("After apic_write.\n");
+ pr_debug("After apic_write\n");
/*
* STARTUP IPI
@@ -613,7 +613,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
*/
udelay(300);
- pr_debug("Startup point 1.\n");
+ pr_debug("Startup point 1\n");
pr_debug("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
@@ -628,12 +628,12 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
if (send_status || accept_status)
break;
}
- pr_debug("After Startup.\n");
+ pr_debug("After Startup\n");
if (send_status)
- printk(KERN_ERR "APIC never delivered???\n");
+ pr_err("APIC never delivered???\n");
if (accept_status)
- printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
+ pr_err("APIC delivery error (%lx)\n", accept_status);
return (send_status | accept_status);
}
@@ -647,11 +647,11 @@ static void __cpuinit announce_cpu(int cpu, int apicid)
if (system_state == SYSTEM_BOOTING) {
if (node != current_node) {
if (current_node > (-1))
- pr_cont(" Ok.\n");
+ pr_cont(" OK\n");
current_node = node;
pr_info("Booting Node %3d, Processors ", node);
}
- pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : "");
+ pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " OK\n" : "");
return;
} else
pr_info("Booting Node %d Processor %d APIC 0x%x\n",
@@ -731,9 +731,9 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
/*
* allow APs to start initializing.
*/
- pr_debug("Before Callout %d.\n", cpu);
+ pr_debug("Before Callout %d\n", cpu);
cpumask_set_cpu(cpu, cpu_callout_mask);
- pr_debug("After Callout %d.\n", cpu);
+ pr_debug("After Callout %d\n", cpu);
/*
* Wait 5s total for a response
@@ -761,7 +761,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
pr_err("CPU%d: Stuck ??\n", cpu);
else
/* trampoline code not run */
- pr_err("CPU%d: Not responding.\n", cpu);
+ pr_err("CPU%d: Not responding\n", cpu);
if (apic->inquire_remote_apic)
apic->inquire_remote_apic(apicid);
}
@@ -806,7 +806,7 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle)
if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
!physid_isset(apicid, phys_cpu_present_map) ||
!apic->apic_id_valid(apicid)) {
- printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
+ pr_err("%s: bad cpu %d\n", __func__, cpu);
return -EINVAL;
}
@@ -887,9 +887,8 @@ static int __init smp_sanity_check(unsigned max_cpus)
unsigned int cpu;
unsigned nr;
- printk(KERN_WARNING
- "More than 8 CPUs detected - skipping them.\n"
- "Use CONFIG_X86_BIGSMP.\n");
+ pr_warn("More than 8 CPUs detected - skipping them\n"
+ "Use CONFIG_X86_BIGSMP\n");
nr = 0;
for_each_present_cpu(cpu) {
@@ -910,8 +909,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
#endif
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
- printk(KERN_WARNING
- "weird, boot CPU (#%d) not listed by the BIOS.\n",
+ pr_warn("weird, boot CPU (#%d) not listed by the BIOS\n",
hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
@@ -923,11 +921,10 @@ static int __init smp_sanity_check(unsigned max_cpus)
*/
if (!smp_found_config && !acpi_lapic) {
preempt_enable();
- printk(KERN_NOTICE "SMP motherboard not detected.\n");
+ pr_notice("SMP motherboard not detected\n");
disable_smp();
if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
+ pr_notice("Local APIC not detected. Using dummy APIC emulation.\n");
return -1;
}
@@ -936,9 +933,8 @@ static int __init smp_sanity_check(unsigned max_cpus)
* CPU too, but we do it for the sake of robustness anyway.
*/
if (!apic->check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk(KERN_NOTICE
- "weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
+ pr_notice("weird, boot CPU (#%d) not listed by the BIOS\n",
+ boot_cpu_physical_apicid);
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
preempt_enable();
@@ -951,8 +947,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
if (!disable_apic) {
pr_err("BIOS bug, local APIC #%d not detected!...\n",
boot_cpu_physical_apicid);
- pr_err("... forcing use of dummy APIC emulation."
- "(tell your hw vendor)\n");
+ pr_err("... forcing use of dummy APIC emulation (tell your hw vendor)\n");
}
smpboot_clear_io_apic();
disable_ioapic_support();
@@ -965,7 +960,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
* If SMP should be disabled, then really disable it!
*/
if (!max_cpus) {
- printk(KERN_INFO "SMP mode deactivated.\n");
+ pr_info("SMP mode deactivated\n");
smpboot_clear_io_apic();
connect_bsp_APIC();
@@ -1017,7 +1012,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
if (smp_sanity_check(max_cpus) < 0) {
- printk(KERN_INFO "SMP disabled\n");
+ pr_info("SMP disabled\n");
disable_smp();
goto out;
}
@@ -1055,7 +1050,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
* Set up local APIC timer on boot CPU.
*/
- printk(KERN_INFO "CPU%d: ", 0);
+ pr_info("CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
x86_init.timers.setup_percpu_clockev();
@@ -1105,7 +1100,7 @@ void __init native_smp_prepare_boot_cpu(void)
void __init native_smp_cpus_done(unsigned int max_cpus)
{
- pr_debug("Boot done.\n");
+ pr_debug("Boot done\n");
nmi_selftest();
impress_friends();
@@ -1166,8 +1161,7 @@ __init void prefill_possible_map(void)
/* nr_cpu_ids could be reduced via nr_cpus= */
if (possible > nr_cpu_ids) {
- printk(KERN_WARNING
- "%d Processors exceeds NR_CPUS limit of %d\n",
+ pr_warn("%d Processors exceeds NR_CPUS limit of %d\n",
possible, nr_cpu_ids);
possible = nr_cpu_ids;
}
@@ -1176,13 +1170,12 @@ __init void prefill_possible_map(void)
if (!setup_max_cpus)
#endif
if (possible > i) {
- printk(KERN_WARNING
- "%d Processors exceeds max_cpus limit of %u\n",
+ pr_warn("%d Processors exceeds max_cpus limit of %u\n",
possible, setup_max_cpus);
possible = i;
}
- printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+ pr_info("Allowing %d CPUs, %d hotplug CPUs\n",
possible, max_t(int, possible - num_processors, 0));
for (i = 0; i < possible; i++)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 05b31d9..b481341 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -9,6 +9,9 @@
/*
* Handle hardware traps and faults.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/interrupt.h>
#include <linux/kallsyms.h>
#include <linux/spinlock.h>
@@ -143,12 +146,11 @@ trap_signal:
#ifdef CONFIG_X86_64
if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
printk_ratelimit()) {
- printk(KERN_INFO
- "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
- tsk->comm, tsk->pid, str,
- regs->ip, regs->sp, error_code);
+ pr_info("%s[%d] trap %s ip:%lx sp:%lx error:%lx",
+ tsk->comm, tsk->pid, str,
+ regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
- printk("\n");
+ pr_cont("\n");
}
#endif
@@ -269,12 +271,11 @@ do_general_protection(struct pt_regs *regs, long error_code)
if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
printk_ratelimit()) {
- printk(KERN_INFO
- "%s[%d] general protection ip:%lx sp:%lx error:%lx",
+ pr_info("%s[%d] general protection ip:%lx sp:%lx error:%lx",
tsk->comm, task_pid_nr(tsk),
regs->ip, regs->sp, error_code);
print_vma_addr(" in ", regs->ip);
- printk("\n");
+ pr_cont("\n");
}
force_sig(SIGSEGV, tsk);
@@ -570,7 +571,7 @@ do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
conditional_sti(regs);
#if 0
/* No need to warn about this any longer. */
- printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+ pr_info("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
#endif
}
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index fc0a147..cfa5d4f 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
@@ -84,8 +86,7 @@ EXPORT_SYMBOL_GPL(check_tsc_unstable);
#ifdef CONFIG_X86_TSC
int __init notsc_setup(char *str)
{
- printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC completely.\n");
+ pr_warn("Kernel compiled with CONFIG_X86_TSC, cannot disable TSC completely\n");
tsc_disabled = 1;
return 1;
}
@@ -373,7 +374,7 @@ static unsigned long quick_pit_calibrate(void)
goto success;
}
}
- printk("Fast TSC calibration failed\n");
+ pr_err("Fast TSC calibration failed\n");
return 0;
success:
@@ -392,7 +393,7 @@ success:
*/
delta *= PIT_TICK_RATE;
do_div(delta, i*256*1000);
- printk("Fast TSC calibration using PIT\n");
+ pr_info("Fast TSC calibration using PIT\n");
return delta;
}
@@ -487,9 +488,8 @@ unsigned long native_calibrate_tsc(void)
* use the reference value, as it is more precise.
*/
if (delta >= 90 && delta <= 110) {
- printk(KERN_INFO
- "TSC: PIT calibration matches %s. %d loops\n",
- hpet ? "HPET" : "PMTIMER", i + 1);
+ pr_info("PIT calibration matches %s. %d loops\n",
+ hpet ? "HPET" : "PMTIMER", i + 1);
return tsc_ref_min;
}
@@ -511,38 +511,36 @@ unsigned long native_calibrate_tsc(void)
*/
if (tsc_pit_min == ULONG_MAX) {
/* PIT gave no useful value */
- printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
+ pr_warn("Unable to calibrate against PIT\n");
/* We don't have an alternative source, disable TSC */
if (!hpet && !ref1 && !ref2) {
- printk("TSC: No reference (HPET/PMTIMER) available\n");
+ pr_notice("No reference (HPET/PMTIMER) available\n");
return 0;
}
/* The alternative source failed as well, disable TSC */
if (tsc_ref_min == ULONG_MAX) {
- printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
- "failed.\n");
+ pr_warn("HPET/PMTIMER calibration failed\n");
return 0;
}
/* Use the alternative source */
- printk(KERN_INFO "TSC: using %s reference calibration\n",
- hpet ? "HPET" : "PMTIMER");
+ pr_info("using %s reference calibration\n",
+ hpet ? "HPET" : "PMTIMER");
return tsc_ref_min;
}
/* We don't have an alternative source, use the PIT calibration value */
if (!hpet && !ref1 && !ref2) {
- printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ pr_info("Using PIT calibration value\n");
return tsc_pit_min;
}
/* The alternative source failed, use the PIT calibration value */
if (tsc_ref_min == ULONG_MAX) {
- printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed. "
- "Using PIT calibration\n");
+ pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n");
return tsc_pit_min;
}
@@ -551,9 +549,9 @@ unsigned long native_calibrate_tsc(void)
* the PIT value as we know that there are PMTIMERs around
* running at double speed. At least we let the user know:
*/
- printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
- hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
- printk(KERN_INFO "TSC: Using PIT calibration value\n");
+ pr_warn("PIT calibration deviates from %s: %lu %lu\n",
+ hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
+ pr_info("Using PIT calibration value\n");
return tsc_pit_min;
}
@@ -785,7 +783,7 @@ void mark_tsc_unstable(char *reason)
tsc_unstable = 1;
sched_clock_stable = 0;
disable_sched_clock_irqtime();
- printk(KERN_INFO "Marking TSC unstable due to %s\n", reason);
+ pr_info("Marking TSC unstable due to %s\n", reason);
/* Change only the rating, when not registered */
if (clocksource_tsc.mult)
clocksource_mark_unstable(&clocksource_tsc);
@@ -912,9 +910,9 @@ static void tsc_refine_calibration_work(struct work_struct *work)
goto out;
tsc_khz = freq;
- printk(KERN_INFO "Refined TSC clocksource calibration: "
- "%lu.%03lu MHz.\n", (unsigned long)tsc_khz / 1000,
- (unsigned long)tsc_khz % 1000);
+ pr_info("Refined TSC clocksource calibration: %lu.%03lu MHz\n",
+ (unsigned long)tsc_khz / 1000,
+ (unsigned long)tsc_khz % 1000);
out:
clocksource_register_khz(&clocksource_tsc, tsc_khz);
@@ -970,9 +968,9 @@ void __init tsc_init(void)
return;
}
- printk("Detected %lu.%03lu MHz processor.\n",
- (unsigned long)cpu_khz / 1000,
- (unsigned long)cpu_khz % 1000);
+ pr_info("Detected %lu.%03lu MHz processor\n",
+ (unsigned long)cpu_khz / 1000,
+ (unsigned long)cpu_khz % 1000);
/*
* Secondary CPUs do not run through tsc_init(), so set up
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 255f58a..54abcc0 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -28,6 +28,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
@@ -137,14 +139,14 @@ struct pt_regs *save_v86_state(struct kernel_vm86_regs *regs)
local_irq_enable();
if (!current->thread.vm86_info) {
- printk("no vm86_info: BAD\n");
+ pr_alert("no vm86_info: BAD\n");
do_exit(SIGSEGV);
}
set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | current->thread.v86mask);
tmp = copy_vm86_regs_to_user(¤t->thread.vm86_info->regs, regs);
tmp += put_user(current->thread.screen_bitmap, ¤t->thread.vm86_info->screen_bitmap);
if (tmp) {
- printk("vm86: could not access userspace vm86_info\n");
+ pr_alert("could not access userspace vm86_info\n");
do_exit(SIGSEGV);
}
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 7515cf0..acdc125 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -18,6 +18,8 @@
* use the vDSO.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/time.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -111,18 +113,13 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm,
static void warn_bad_vsyscall(const char *level, struct pt_regs *regs,
const char *message)
{
- static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);
- struct task_struct *tsk;
-
- if (!show_unhandled_signals || !__ratelimit(&rs))
+ if (!show_unhandled_signals)
return;
- tsk = current;
-
- printk("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
- level, tsk->comm, task_pid_nr(tsk),
- message, regs->ip, regs->cs,
- regs->sp, regs->ax, regs->si, regs->di);
+ pr_notice_ratelimited("%s%s[%d] %s ip:%lx cs:%lx sp:%lx ax:%lx si:%lx di:%lx\n",
+ level, current->comm, task_pid_nr(current),
+ message, regs->ip, regs->cs,
+ regs->sp, regs->ax, regs->si, regs->di);
}
static int addr_to_vsyscall_nr(unsigned long addr)
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index bd18149..3d3e207 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -3,6 +3,9 @@
*
* Author: Suresh Siddha <suresh.b.siddha@intel.com>
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/bootmem.h>
#include <linux/compat.h>
#include <asm/i387.h>
@@ -162,7 +165,7 @@ int save_i387_xstate(void __user *buf)
BUG_ON(sig_xstate_size < xstate_size);
if ((unsigned long)buf % 64)
- printk("save_i387_xstate: bad fpstate %p\n", buf);
+ pr_err("%s: bad fpstate %p\n", __func__, buf);
if (!used_math())
return 0;
@@ -422,7 +425,7 @@ static void __init xstate_enable_boot_cpu(void)
pcntxt_mask = eax + ((u64)edx << 32);
if ((pcntxt_mask & XSTATE_FPSSE) != XSTATE_FPSSE) {
- printk(KERN_ERR "FP/SSE not shown under xsave features 0x%llx\n",
+ pr_err("FP/SSE not shown under xsave features 0x%llx\n",
pcntxt_mask);
BUG();
}
@@ -445,9 +448,8 @@ static void __init xstate_enable_boot_cpu(void)
setup_xstate_init();
- printk(KERN_INFO "xsave/xrstor: enabled xstate_bv 0x%llx, "
- "cntxt size 0x%x\n",
- pcntxt_mask, xstate_size);
+ pr_info("enabled xstate_bv 0x%llx, cntxt size 0x%x\n",
+ pcntxt_mask, xstate_size);
}
/*
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index bc4e9d8..e0e6990 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -385,7 +385,7 @@ void free_initmem(void)
}
#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
+void __init free_initrd_mem(unsigned long start, unsigned long end)
{
/*
* end could be not aligned, and We can not align that,
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2012-07-22 13:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-22 13:53 [GIT PULL] x86/debug changes for v3.6 Ingo Molnar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.