All of lore.kernel.org
 help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: wei_wang@realsil.com.cn
Cc: gregkh@linuxfoundation.org, devel@linuxdriverproject.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/3] drivers/misc: Add realtek card reader core driver
Date: Mon, 23 Jul 2012 18:33:42 +0200	[thread overview]
Message-ID: <20120723163340.GA4105@x1.osrc.amd.com> (raw)
In-Reply-To: <1343036558-8189-1-git-send-email-wei_wang@realsil.com.cn>

On Mon, Jul 23, 2012 at 05:42:38PM +0800, wei_wang@realsil.com.cn wrote:
> From: Wei WANG <wei_wang@realsil.com.cn>
> 
> Realtek card reader core driver is the bus driver for Realtek
> driver-based card reader, which supplies adapter layer to
> be used by lower-level pci/usb card reader and upper-level
> sdmmc/memstick host driver.
> 
> Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
> ---
>  Documentation/misc-devices/realtek_cr.txt |   27 ++
>  drivers/misc/Kconfig                      |    1 +
>  drivers/misc/Makefile                     |    1 +
>  drivers/misc/realtek_cr/Kconfig           |   26 ++
>  drivers/misc/realtek_cr/Makefile          |    7 +
>  drivers/misc/realtek_cr/core/Kconfig      |    6 +
>  drivers/misc/realtek_cr/core/Makefile     |    1 +
>  drivers/misc/realtek_cr/core/rtsx_core.c  |  492 +++++++++++++++++++++++++++++
>  include/linux/rtsx_core.h                 |  183 +++++++++++
>  9 files changed, 744 insertions(+)
>  create mode 100644 Documentation/misc-devices/realtek_cr.txt
>  create mode 100644 drivers/misc/realtek_cr/Kconfig
>  create mode 100644 drivers/misc/realtek_cr/Makefile
>  create mode 100644 drivers/misc/realtek_cr/core/Kconfig
>  create mode 100644 drivers/misc/realtek_cr/core/Makefile
>  create mode 100644 drivers/misc/realtek_cr/core/rtsx_core.c
>  create mode 100644 include/linux/rtsx_core.h
> 
> diff --git a/Documentation/misc-devices/realtek_cr.txt b/Documentation/misc-devices/realtek_cr.txt
> new file mode 100644
> index 0000000..b4e6fbe
> --- /dev/null
> +++ b/Documentation/misc-devices/realtek_cr.txt
> @@ -0,0 +1,27 @@
> +Realtek Driver-based Card Reader
> +================================
> +
> +Supported chips:
> +RTS5209
> +RTS5229
> +
> +Contact Email:
> +pc_sw_linux@realsil.com.cn
> +
> +
> +Description
> +-----------
> +
> +Realtek driver-based card reader supports access to many types of memory cards,
> +such as Memory Stick, Memory Stick Pro, Secure Digital and MultiMediaCard.
> +
> +
> +udev rules
> +----------
> +
> +In order to modprobe Realtek SD/MMC interface driver automatically, the following rule
> +should be added to the udev rules file:
> +
> +SUBSYSTEM=="rtsx_cr", ENV{RTSX_CARD_TYPE}=="SD", RUN+="/sbin/modprobe -bv rtsx_sdmmc"
> +
> +Typically, we may edit /lib/udev/rules.d/80-drivers.rules and copy the rule into it in Ubuntu.
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 2661f6e..09ce905 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -517,4 +517,5 @@ source "drivers/misc/lis3lv02d/Kconfig"
>  source "drivers/misc/carma/Kconfig"
>  source "drivers/misc/altera-stapl/Kconfig"
>  source "drivers/misc/mei/Kconfig"
> +source "drivers/misc/realtek_cr/Kconfig"
>  endmenu
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 456972f..c09f147 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -51,3 +51,4 @@ obj-y				+= carma/
>  obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
>  obj-$(CONFIG_ALTERA_STAPL)	+=altera-stapl/
>  obj-$(CONFIG_INTEL_MEI)		+= mei/
> +obj-$(CONFIG_REALTEK_CR_SUPPORT) += realtek_cr/
> diff --git a/drivers/misc/realtek_cr/Kconfig b/drivers/misc/realtek_cr/Kconfig
> new file mode 100644
> index 0000000..303d98a
> --- /dev/null
> +++ b/drivers/misc/realtek_cr/Kconfig
> @@ -0,0 +1,26 @@
> +#
> +# Realtek driver-based card reader
> +#
> +
> +menuconfig REALTEK_CR_SUPPORT
> +	tristate "Realtek driver-based card reader"
> +	help
> +	  Realtek driver-based card reader supports access to many types of
> +	  memory cards, such as Memory Stick, Memory Stick Pro, Secure Digital
> +	  and MultiMediaCard.
> +
> +	  If you want to use Realtek driver-based card reader, enable this
> +	  option and other options below.
> +
> +config REALTEK_CR_DEBUG
> +	bool "Realtek driver-based card reader debugging"
> +	depends on REALTEK_CR_SUPPORT != n
> +	help
> +	  This is an option for use by developers; most people should
> +	  say N here.  This enables Realtek card reader driver debugging.
> +
> +if REALTEK_CR_SUPPORT
> +
> +source "drivers/misc/realtek_cr/core/Kconfig"
> +
> +endif

Ok, maybe I'm a newbie here but this is a card reader driver and AFAICT
it should be placed under CONFIG_MMC. Why is it under drivers/misc?

-- 
Regards/Gruss,
Boris.

  parent reply	other threads:[~2012-07-23 16:33 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-23  9:42 [PATCH 1/3] drivers/misc: Add realtek card reader core driver wei_wang
2012-07-23 11:17 ` Dan Carpenter
2012-07-26  3:11   ` wwang
2012-07-26  3:59     ` gregkh
2012-07-23 11:24 ` [PATCH 1/3] drivers/misc: Add " Borislav Petkov
2012-07-23 15:14 ` Matthew Garrett
2012-07-23 16:33 ` Borislav Petkov [this message]
2012-07-24  1:21   ` wwang
2012-07-24  6:44     ` Borislav Petkov
2012-07-24  8:47       ` wwang
2012-07-24 14:07         ` Borislav Petkov
     [not found]           ` <500F59D7.2050508@realsil.com.cn>
2012-07-25  8:04             ` Borislav Petkov
2012-07-25 10:16               ` Aaron Lu
2012-07-26  1:34                 ` wwang
2012-07-26  8:43                   ` Borislav Petkov
  -- strict thread matches above, loose matches on Subject: below --
2012-07-31  7:42 wei_wang
2012-07-31  7:42 ` wei_wang
2012-07-31 11:23 ` Arnd Bergmann
2012-08-01  6:19   ` wwang
2012-08-01 14:31     ` Arnd Bergmann
2012-08-03  2:31       ` wwang
2012-08-03 14:39         ` Arnd Bergmann
2012-08-13 20:59       ` Maxim Levitsky
2012-07-25  3:02 wei_wang
2012-07-20 10:09 wei_wang
2012-07-19  9:54 wei_wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120723163340.GA4105@x1.osrc.amd.com \
    --to=bp@alien8.de \
    --cc=devel@linuxdriverproject.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=wei_wang@realsil.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.