From: Albert ARIBAUD (U-Boot) <albert.u.boot@aribaud.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx
Date: Tue, 14 Aug 2012 01:06:55 +0200 [thread overview]
Message-ID: <20120814010655.7c83440e@lilith> (raw)
In-Reply-To: <5024B00E.1070208@denx.de>
Hi Stefano,
On Fri, 10 Aug 2012 08:54:06 +0200, Stefano Babic <sbabic@denx.de>
wrote:
> Hi Albert,
>
> an update pull request, please pull from u-boot-imx, thanks.
>
> The following changes since commit
> 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:
>
> DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to
> 42abce776222a5d5cb2b355e77539cabb705b04a:
>
> sc_sps_1: Adjust board config to use 'mxs' SoC code (2012-08-10
> 08:48:24 +0200)
>
> ----------------------------------------------------------------
> Beno?t Th?baudeau (1):
> rtc: imxdi: Initial support
>
> Fabio Estevam (3):
> mx28evk: Turn on caches
> mx51evk: do not overwrite the console
> vision2: do not overwrite the console
>
> Marek Vasut (9):
> MX28: SPI: Refactor spi_xfer a bit
> MX28: SPI: Pull out the PIO transfer function
> MX28: SPI: Add DMA transfer support
> MX28: Fix up the MMC driver DMA mode
> MX28: Split out the PIO and DMA transfer functions
> MX28: Transfer small blocks via PIO in MXS MMC
> MX28: Fix MXS MMC DMA issues
> MX28: Move the u-boot.bd info CPUDIR/SOCDIR
> MX28: Add SchulerControl SC_SPS_1 platform
>
> Otavio Salvador (10):
> imx: Use a clear identification of an unidentified CPU type
> MX28: extend print_cpuinfo() to use chip information
> MX28: use a clear name for DDR2 initialization
> mxs: reorganize source directory for easy sharing of code in
> i.MXS SoCs
> mxs: prefix register acessor macros with 'mxs' prefix
> mxs: prefix register structs with 'mxs' prefix
> mxs: Reowork SPL to use 'mxs' prefix for methods
> mxs: Clarify why we poweroff in case of brownout in 5v conflict
> mxs: rename mx28.c to mxs.c as it is common to i.MX233 and
> i.MX28 SoCs sc_sps_1: Adjust board config to use 'mxs' SoC code
>
> Stathis Voukelatos (1):
> i.MX28: bug fixes in PMU configuration code
>
> Stefano Babic (1):
> MX5: mx53loco: do not overwrite the console
>
> Veli-Pekka Peltola (1):
> Add support for Bluegiga APX4 Development Kit
>
> MAINTAINERS | 5 +
> Makefile | 2 +-
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +-
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +--
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +-
> arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 72 +++--
> .../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +-
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 20 +-
> .../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +-
> .../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 64 ++---
> .../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 274
> ++++++++++----------
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 0
> arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 8 +-
> .../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +-
> .../arm/cpu/arm926ejs/mxs}/u-boot.bd | 0
> arch/arm/cpu/armv7/imx-common/cpu.c | 4 +-
> .../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 0
> .../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0
> .../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 0
> .../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0
> .../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0
> .../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256
> +++++++++---------
> .../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0
> .../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 ++--
> .../asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h | 60 ++---
> .../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +--
> .../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 ++--
> .../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +-
> .../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +--
> .../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 ++---
> .../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 ++--
> .../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +++----
> .../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170
> ++++++------ .../asm/{arch-mx28 => arch-mxs}/regs-power.h |
> 30 +-- .../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +--
> .../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +--
> .../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +--
> .../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +-
> .../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +-
> .../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 10 +-
> board/bluegiga/apx4devkit/Makefile | 47 ++++
> board/bluegiga/apx4devkit/apx4devkit.c | 150 +++++++++++
> board/bluegiga/apx4devkit/spl_boot.c | 164
> ++++++++++++ board/denx/m28evk/m28evk.c |
> 4 +- board/denx/m28evk/spl_boot.c | 2 +-
> board/freescale/mx28evk/iomux.c | 2 +-
> board/freescale/mx28evk/mx28evk.c | 4 +-
> board/freescale/mx28evk/u-boot.bd | 14 -
> board/freescale/mx51evk/mx51evk.c | 10 +-
> board/freescale/mx53loco/mx53loco.c | 12 +-
> board/schulercontrol/sc_sps_1/Makefile | 47 ++++
> board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++++++++
> board/schulercontrol/sc_sps_1/spl_boot.c | 165
> ++++++++++++ board/ttcontrol/vision2/vision2.c |
> 11 +- boards.cfg | 6 +-
> doc/README.m28 | 4 +-
> doc/README.mx28evk | 4 +-
> drivers/dma/apbh_dma.c | 32 +--
> drivers/gpio/mxs_gpio.c | 16 +-
> drivers/i2c/mxs_i2c.c | 12 +-
> drivers/mmc/mxsmmc.c | 202
> ++++++++------- drivers/mtd/nand/mxs_nand.c
> | 12 +- drivers/rtc/Makefile | 1 +
> drivers/rtc/imxdi.c | 244
> +++++++++++++++++ drivers/rtc/mxsrtc.c
> | 6 +- drivers/spi/mxs_spi.c | 200
> +++++++++++--- drivers/usb/host/ehci-mxs.c |
> 24 +- include/configs/apx4devkit.h | 238
> +++++++++++++++++ include/configs/m28evk.h
> | 4 +- include/configs/mx28evk.h | 6 +-
> include/configs/mx51evk.h | 2 +
> include/configs/mx53loco.h | 2 +
> include/configs/sc_sps_1.h | 208
> +++++++++++++++ include/configs/vision2.h
> | 2 + 75 files changed, 2569 insertions(+), 982 deletions(-)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%)
> rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (79%)
> rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h}
> (81%) rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (90%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (100%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (95%)
> rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%)
> rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mxs}/u-boot.bd
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h
> (100%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h
> (100%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/iomux-mx28.h (100%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/iomux.h (100%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-apbh.h (77%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-base.h (100%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-bch.h (92%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-clkctrl.h (88%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
> rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h
> (77%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h
> (95%) rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h
> (94%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-lcdif.h (84%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-lradc.h (96%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%)
> rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h
> (93%) rename arch/arm/include/asm/{arch-mx28 =>
> arch-mxs}/regs-power.h (97%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-rtc.h (91%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-ssp.h (95%) rename arch/arm/include/asm/{arch-mx28
> => arch-mxs}/regs-timrot.h (90%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%) rename
> arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
> rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (89%)
> create mode 100644 board/bluegiga/apx4devkit/Makefile create mode
> 100644 board/bluegiga/apx4devkit/apx4devkit.c create mode 100644
> board/bluegiga/apx4devkit/spl_boot.c delete mode 100644
> board/freescale/mx28evk/u-boot.bd create mode 100644
> board/schulercontrol/sc_sps_1/Makefile create mode 100644
> board/schulercontrol/sc_sps_1/sc_sps_1.c create mode 100644
> board/schulercontrol/sc_sps_1/spl_boot.c create mode 100644
> drivers/rtc/imxdi.c create mode 100644 include/configs/apx4devkit.h
> create mode 100644 include/configs/sc_sps_1.h
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
prev parent reply other threads:[~2012-08-13 23:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 16:00 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2012-08-10 6:54 ` [U-Boot] [GIT PULL] [Update] " Stefano Babic
2012-08-13 23:06 ` Albert ARIBAUD [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120814010655.7c83440e@lilith \
--to=albert.u.boot@aribaud.net \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.