From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [GIT PULL] [Update] Pull request: u-boot-imx
Date: Fri, 10 Aug 2012 08:54:06 +0200 [thread overview]
Message-ID: <5024B00E.1070208@denx.de> (raw)
In-Reply-To: <50213BA4.1050801@denx.de>
Hi Albert,
an update pull request, please pull from u-boot-imx, thanks.
The following changes since commit 8abcd8ab962cd5fb2a4c025e7c7b62a9faf4aa08:
DaVinci DA8xx: fix set_cpu_clk_info() (2012-08-05 22:02:40 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 42abce776222a5d5cb2b355e77539cabb705b04a:
sc_sps_1: Adjust board config to use 'mxs' SoC code (2012-08-10
08:48:24 +0200)
----------------------------------------------------------------
Beno?t Th?baudeau (1):
rtc: imxdi: Initial support
Fabio Estevam (3):
mx28evk: Turn on caches
mx51evk: do not overwrite the console
vision2: do not overwrite the console
Marek Vasut (9):
MX28: SPI: Refactor spi_xfer a bit
MX28: SPI: Pull out the PIO transfer function
MX28: SPI: Add DMA transfer support
MX28: Fix up the MMC driver DMA mode
MX28: Split out the PIO and DMA transfer functions
MX28: Transfer small blocks via PIO in MXS MMC
MX28: Fix MXS MMC DMA issues
MX28: Move the u-boot.bd info CPUDIR/SOCDIR
MX28: Add SchulerControl SC_SPS_1 platform
Otavio Salvador (10):
imx: Use a clear identification of an unidentified CPU type
MX28: extend print_cpuinfo() to use chip information
MX28: use a clear name for DDR2 initialization
mxs: reorganize source directory for easy sharing of code in i.MXS
SoCs
mxs: prefix register acessor macros with 'mxs' prefix
mxs: prefix register structs with 'mxs' prefix
mxs: Reowork SPL to use 'mxs' prefix for methods
mxs: Clarify why we poweroff in case of brownout in 5v conflict
mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs
sc_sps_1: Adjust board config to use 'mxs' SoC code
Stathis Voukelatos (1):
i.MX28: bug fixes in PMU configuration code
Stefano Babic (1):
MX5: mx53loco: do not overwrite the console
Veli-Pekka Peltola (1):
Add support for Bluegiga APX4 Development Kit
MAINTAINERS | 5 +
Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile | 2 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c | 40 +--
arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c | 6 +-
arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} | 72 +++--
.../arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} | 14 +-
arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c | 20 +-
.../cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c | 10 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c | 64 ++---
.../cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c | 274
++++++++++----------
arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S | 0
arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c | 8 +-
.../arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds | 2 +-
.../arm/cpu/arm926ejs/mxs}/u-boot.bd | 0
arch/arm/cpu/armv7/imx-common/cpu.c | 4 +-
.../include/asm/{arch-mx28 => arch-mxs}/clock.h | 0
arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h | 0
.../arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/imx-regs.h | 0
.../asm/{arch-mx28 => arch-mxs}/iomux-mx28.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/iomux.h | 0
.../asm/{arch-mx28 => arch-mxs}/regs-apbh.h | 256
+++++++++---------
.../asm/{arch-mx28 => arch-mxs}/regs-base.h | 0
.../include/asm/{arch-mx28 => arch-mxs}/regs-bch.h | 44 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h | 60 ++---
.../asm/{arch-mx28 => arch-mxs}/regs-common.h | 34 +--
.../asm/{arch-mx28 => arch-mxs}/regs-digctl.h | 56 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-gpmi.h | 28 +-
.../include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h | 30 +--
.../asm/{arch-mx28 => arch-mxs}/regs-lcdif.h | 66 ++---
.../asm/{arch-mx28 => arch-mxs}/regs-lradc.h | 50 ++--
.../asm/{arch-mx28 => arch-mxs}/regs-ocotp.h | 88 +++----
.../asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h | 170 ++++++------
.../asm/{arch-mx28 => arch-mxs}/regs-power.h | 30 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h | 30 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h | 42 +--
.../asm/{arch-mx28 => arch-mxs}/regs-timrot.h | 40 +--
.../include/asm/{arch-mx28 => arch-mxs}/regs-usb.h | 2 +-
.../asm/{arch-mx28 => arch-mxs}/regs-usbphy.h | 22 +-
.../asm/{arch-mx28 => arch-mxs}/sys_proto.h | 10 +-
board/bluegiga/apx4devkit/Makefile | 47 ++++
board/bluegiga/apx4devkit/apx4devkit.c | 150 +++++++++++
board/bluegiga/apx4devkit/spl_boot.c | 164 ++++++++++++
board/denx/m28evk/m28evk.c | 4 +-
board/denx/m28evk/spl_boot.c | 2 +-
board/freescale/mx28evk/iomux.c | 2 +-
board/freescale/mx28evk/mx28evk.c | 4 +-
board/freescale/mx28evk/u-boot.bd | 14 -
board/freescale/mx51evk/mx51evk.c | 10 +-
board/freescale/mx53loco/mx53loco.c | 12 +-
board/schulercontrol/sc_sps_1/Makefile | 47 ++++
board/schulercontrol/sc_sps_1/sc_sps_1.c | 113 ++++++++
board/schulercontrol/sc_sps_1/spl_boot.c | 165 ++++++++++++
board/ttcontrol/vision2/vision2.c | 11 +-
boards.cfg | 6 +-
doc/README.m28 | 4 +-
doc/README.mx28evk | 4 +-
drivers/dma/apbh_dma.c | 32 +--
drivers/gpio/mxs_gpio.c | 16 +-
drivers/i2c/mxs_i2c.c | 12 +-
drivers/mmc/mxsmmc.c | 202 ++++++++-------
drivers/mtd/nand/mxs_nand.c | 12 +-
drivers/rtc/Makefile | 1 +
drivers/rtc/imxdi.c | 244 +++++++++++++++++
drivers/rtc/mxsrtc.c | 6 +-
drivers/spi/mxs_spi.c | 200 +++++++++++---
drivers/usb/host/ehci-mxs.c | 24 +-
include/configs/apx4devkit.h | 238 +++++++++++++++++
include/configs/m28evk.h | 4 +-
include/configs/mx28evk.h | 6 +-
include/configs/mx51evk.h | 2 +
include/configs/mx53loco.h | 2 +
include/configs/sc_sps_1.h | 208 +++++++++++++++
include/configs/vision2.h | 2 +
75 files changed, 2569 insertions(+), 982 deletions(-)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/Makefile (97%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/clock.c (89%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/iomux.c (94%)
rename arch/arm/cpu/arm926ejs/{mx28/mx28.c => mxs/mxs.c} (79%)
rename arch/arm/cpu/arm926ejs/{mx28/mx28_init.h => mxs/mxs_init.h} (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_boot.c (90%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_lradc_init.c (91%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_mem_init.c (83%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/spl_power_init.c (81%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/start.S (100%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/timer.c (95%)
rename arch/arm/cpu/arm926ejs/{mx28 => mxs}/u-boot-spl.lds (97%)
rename {board/denx/m28evk => arch/arm/cpu/arm926ejs/mxs}/u-boot.bd (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/clock.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/dma.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/gpio.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/imx-regs.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux-mx28.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/iomux.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-apbh.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-base.h (100%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-bch.h (92%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-clkctrl.h (88%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-common.h (78%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-digctl.h (77%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-gpmi.h (95%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-i2c.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lcdif.h (84%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-lradc.h (96%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ocotp.h (71%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-pinctrl.h (93%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-power.h (97%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-rtc.h (91%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-ssp.h (95%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-timrot.h (90%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usb.h (99%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/regs-usbphy.h (94%)
rename arch/arm/include/asm/{arch-mx28 => arch-mxs}/sys_proto.h (89%)
create mode 100644 board/bluegiga/apx4devkit/Makefile
create mode 100644 board/bluegiga/apx4devkit/apx4devkit.c
create mode 100644 board/bluegiga/apx4devkit/spl_boot.c
delete mode 100644 board/freescale/mx28evk/u-boot.bd
create mode 100644 board/schulercontrol/sc_sps_1/Makefile
create mode 100644 board/schulercontrol/sc_sps_1/sc_sps_1.c
create mode 100644 board/schulercontrol/sc_sps_1/spl_boot.c
create mode 100644 drivers/rtc/imxdi.c
create mode 100644 include/configs/apx4devkit.h
create mode 100644 include/configs/sc_sps_1.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2012-08-10 6:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 16:00 [U-Boot] [GIT PULL] Pull request: u-boot-imx Stefano Babic
2012-08-10 6:54 ` Stefano Babic [this message]
2012-08-13 23:06 ` [U-Boot] [GIT PULL] [Update] " Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5024B00E.1070208@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.