From: Borislav Petkov <bp@alien8.de>
To: 王炜 <wei_wang@realsil.com.cn>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>,
"devel@linuxdriverproject.org" <devel@linuxdriverproject.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"cjb@laptop.org" <cjb@laptop.org>,
"arnd@arndb.de" <arnd@arndb.de>,
"sameo@linux.intel.com" <sameo@linux.intel.com>
Subject: Re: 答复: [PATCH v2 0/2] Add modules to support realtek PCIE card reader
Date: Tue, 14 Aug 2012 18:14:20 +0200 [thread overview]
Message-ID: <20120814161420.GA6971@x1.osrc.amd.com> (raw)
In-Reply-To: <637A8844983F7F4092120E33EA3F28CD31E74BE133@RSEX1.realsil.com.cn>
On Tue, Aug 14, 2012 at 11:22:38PM +0800, 王炜 wrote:
> Hi Boris:
>
> Can you tell me the detailed information about your pc and the SD
> card? Do you have ever tried to use another SD card? I have tested
> all of the SD cards that we have in our company, and everything runs
> smoothly. Maybe it is compatibilty issue and we have to debug it
> specifically.
>
> Please help to check the VID:PID of the card reader using lspci, and I
> will send you our SCSI driver for this reader to test the card.
Ok,
here's some info:
* Card is: http://tinyurl.com/cadsmb9
It is in German but should be clear. Otherwise, ask me.
* lspci output:
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
...
03:00.0 ff00: 10ec:5209 (rev 01)
Subsystem: 17aa:21ec
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at f0400000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [140 v1] Device Serial Number 00-00-00-01-00-4c-e0-00
HTH.
--
Regards/Gruss,
Boris.
prev parent reply other threads:[~2012-08-14 16:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-14 10:40 [PATCH v2 0/2] Add modules to support realtek PCIE card reader wei_wang
2012-08-14 10:40 ` wei_wang
2012-08-14 10:40 ` [PATCH v2 1/2] drivers/mfd: Add realtek pcie card reader driver wei_wang
2012-08-14 10:40 ` wei_wang
2012-08-15 6:40 ` Arnd Bergmann
2012-08-16 21:25 ` Tejun Heo
2012-08-14 10:40 ` [PATCH v2 2/2] drivers/mmc: Add realtek pcie sdmmc host driver wei_wang
2012-08-14 10:40 ` wei_wang
2012-08-14 15:05 ` [PATCH v2 0/2] Add modules to support realtek PCIE card reader Borislav Petkov
2012-08-14 15:05 ` Borislav Petkov
2012-08-14 15:22 ` 答复: " 王炜
2012-08-14 16:14 ` Borislav Petkov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120814161420.GA6971@x1.osrc.amd.com \
--to=bp@alien8.de \
--cc=arnd@arndb.de \
--cc=cjb@laptop.org \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=sameo@linux.intel.com \
--cc=wei_wang@realsil.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.