* [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
@ 2012-08-15 11:23 ` Vaibhav Hiremath
0 siblings, 0 replies; 6+ messages in thread
From: Vaibhav Hiremath @ 2012-08-15 11:23 UTC (permalink / raw)
To: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Ideally in common SoC dtsi file should set all modules
to "disabled" state and it should get enabled in respective
EVM/Board dts file as per usage.
This patch sets default status of all modules to "disabled"
state in am33xx.dtsi file. Currently there are no modules
supported as part of Bone and EVM dts support, so care
to add entry "status = "okay"" while adding support for any
module.
Signed-off-by: Vaibhav Hiremath <hvaibhav-l0cyMroinI0@public.gmane.org>
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Cc: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
---
Changes from V1:
- Fixed indentation issue caused due to extra spaces.
arch/arm/boot/dts/am335x-bone.dts | 6 ++++++
arch/arm/boot/dts/am335x-evm.dts | 6 ++++++
arch/arm/boot/dts/am33xx.dtsi | 9 +++++++++
3 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db..a7906cb 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44E09000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9..5dd8a6b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44E09000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c4..5f6c8e3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -102,36 +102,42 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart2: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart3: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart4: serial@481A6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart5: serial@481A8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart6: serial@481AA000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ status = "disabled";
};
i2c1: i2c@44E0B000 {
@@ -139,6 +145,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ status = "disabled";
};
i2c2: i2c@4802A000 {
@@ -146,6 +153,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ status = "disabled";
};
i2c3: i2c@4819C000 {
@@ -153,6 +161,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ status = "disabled";
};
};
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
@ 2012-08-15 11:23 ` Vaibhav Hiremath
0 siblings, 0 replies; 6+ messages in thread
From: Vaibhav Hiremath @ 2012-08-15 11:23 UTC (permalink / raw)
To: devicetree-discuss
Cc: linux-arm-kernel, linux-kernel, linux-omap, Vaibhav Hiremath,
Benoit Cousson, Grant Likely, Tony Lindgren
Ideally in common SoC dtsi file should set all modules
to "disabled" state and it should get enabled in respective
EVM/Board dts file as per usage.
This patch sets default status of all modules to "disabled"
state in am33xx.dtsi file. Currently there are no modules
supported as part of Bone and EVM dts support, so care
to add entry "status = "okay"" while adding support for any
module.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
---
Changes from V1:
- Fixed indentation issue caused due to extra spaces.
arch/arm/boot/dts/am335x-bone.dts | 6 ++++++
arch/arm/boot/dts/am335x-evm.dts | 6 ++++++
arch/arm/boot/dts/am33xx.dtsi | 9 +++++++++
3 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db..a7906cb 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44E09000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9..5dd8a6b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial@44E09000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c4..5f6c8e3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -102,36 +102,42 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart2: serial@48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart3: serial@48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart4: serial@481A6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart5: serial@481A8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart6: serial@481AA000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ status = "disabled";
};
i2c1: i2c@44E0B000 {
@@ -139,6 +145,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ status = "disabled";
};
i2c2: i2c@4802A000 {
@@ -146,6 +153,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ status = "disabled";
};
i2c3: i2c@4819C000 {
@@ -153,6 +161,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ status = "disabled";
};
};
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
@ 2012-08-15 11:23 ` Vaibhav Hiremath
0 siblings, 0 replies; 6+ messages in thread
From: Vaibhav Hiremath @ 2012-08-15 11:23 UTC (permalink / raw)
To: linux-arm-kernel
Ideally in common SoC dtsi file should set all modules
to "disabled" state and it should get enabled in respective
EVM/Board dts file as per usage.
This patch sets default status of all modules to "disabled"
state in am33xx.dtsi file. Currently there are no modules
supported as part of Bone and EVM dts support, so care
to add entry "status = "okay"" while adding support for any
module.
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Tony Lindgren <tony@atomide.com>
---
Changes from V1:
- Fixed indentation issue caused due to extra spaces.
arch/arm/boot/dts/am335x-bone.dts | 6 ++++++
arch/arm/boot/dts/am335x-evm.dts | 6 ++++++
arch/arm/boot/dts/am33xx.dtsi | 9 +++++++++
3 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index a9af4db..a7906cb 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -17,4 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial at 44E09000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index d6a97d9..5dd8a6b 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -17,4 +17,10 @@
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+
+ ocp {
+ uart1: serial at 44E09000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c4..5f6c8e3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -102,36 +102,42 @@
compatible = "ti,omap3-uart";
ti,hwmods = "uart1";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart2: serial at 48022000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart2";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart3: serial at 48024000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart3";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart4: serial at 481A6000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart5: serial at 481A8000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart5";
clock-frequency = <48000000>;
+ status = "disabled";
};
uart6: serial at 481AA000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart6";
clock-frequency = <48000000>;
+ status = "disabled";
};
i2c1: i2c at 44E0B000 {
@@ -139,6 +145,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
+ status = "disabled";
};
i2c2: i2c at 4802A000 {
@@ -146,6 +153,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
+ status = "disabled";
};
i2c3: i2c at 4819C000 {
@@ -153,6 +161,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
+ status = "disabled";
};
};
};
--
1.7.0.4
^ permalink raw reply related [flat|nested] 6+ messages in thread[parent not found: <1345029805-27987-1-git-send-email-hvaibhav-l0cyMroinI0@public.gmane.org>]
* Re: [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
2012-08-15 11:23 ` Vaibhav Hiremath
(?)
@ 2012-08-24 20:07 ` Tony Lindgren
-1 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2012-08-24 20:07 UTC (permalink / raw)
To: Vaibhav Hiremath
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-omap-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
* Vaibhav Hiremath <hvaibhav-l0cyMroinI0@public.gmane.org> [120815 04:24]:
> Ideally in common SoC dtsi file should set all modules
> to "disabled" state and it should get enabled in respective
> EVM/Board dts file as per usage.
>
> This patch sets default status of all modules to "disabled"
> state in am33xx.dtsi file. Currently there are no modules
> supported as part of Bone and EVM dts support, so care
> to add entry "status = "okay"" while adding support for any
> module.
>
> Signed-off-by: Vaibhav Hiremath <hvaibhav-l0cyMroinI0@public.gmane.org>
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> Cc: Benoit Cousson <b-cousson-l0cyMroinI0@public.gmane.org>
> Cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
> ---
> Changes from V1:
> - Fixed indentation issue caused due to extra spaces.
Thanks applying into devel-dt branch.
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
@ 2012-08-24 20:07 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2012-08-24 20:07 UTC (permalink / raw)
To: Vaibhav Hiremath
Cc: devicetree-discuss, linux-arm-kernel, linux-kernel, linux-omap,
Benoit Cousson, Grant Likely
* Vaibhav Hiremath <hvaibhav@ti.com> [120815 04:24]:
> Ideally in common SoC dtsi file should set all modules
> to "disabled" state and it should get enabled in respective
> EVM/Board dts file as per usage.
>
> This patch sets default status of all modules to "disabled"
> state in am33xx.dtsi file. Currently there are no modules
> supported as part of Bone and EVM dts support, so care
> to add entry "status = "okay"" while adding support for any
> module.
>
> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Tony Lindgren <tony@atomide.com>
> ---
> Changes from V1:
> - Fixed indentation issue caused due to extra spaces.
Thanks applying into devel-dt branch.
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
@ 2012-08-24 20:07 ` Tony Lindgren
0 siblings, 0 replies; 6+ messages in thread
From: Tony Lindgren @ 2012-08-24 20:07 UTC (permalink / raw)
To: linux-arm-kernel
* Vaibhav Hiremath <hvaibhav@ti.com> [120815 04:24]:
> Ideally in common SoC dtsi file should set all modules
> to "disabled" state and it should get enabled in respective
> EVM/Board dts file as per usage.
>
> This patch sets default status of all modules to "disabled"
> state in am33xx.dtsi file. Currently there are no modules
> supported as part of Bone and EVM dts support, so care
> to add entry "status = "okay"" while adding support for any
> module.
>
> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Benoit Cousson <b-cousson@ti.com>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Tony Lindgren <tony@atomide.com>
> ---
> Changes from V1:
> - Fixed indentation issue caused due to extra spaces.
Thanks applying into devel-dt branch.
Tony
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-08-24 20:07 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-15 11:23 [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state Vaibhav Hiremath
2012-08-15 11:23 ` Vaibhav Hiremath
2012-08-15 11:23 ` Vaibhav Hiremath
[not found] ` <1345029805-27987-1-git-send-email-hvaibhav-l0cyMroinI0@public.gmane.org>
2012-08-24 20:07 ` Tony Lindgren
2012-08-24 20:07 ` Tony Lindgren
2012-08-24 20:07 ` Tony Lindgren
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.