* [PATCH] Staging: panel: fix spinlock trylock failure on UP
@ 2012-09-09 8:23 Fengguang Wu
0 siblings, 0 replies; only message in thread
From: Fengguang Wu @ 2012-09-09 8:23 UTC (permalink / raw)
To: Greg KH
Cc: Toshiaki Yamane, Arnd Bergmann, Kulikov Vasiliy, Peter Hüwe,
Willy Tarreau, devel, LKML
Use spin_lock_irq() to quiet warning:
[ 8.232324] BUG: spinlock trylock failure on UP on CPU#0, reboot/85
[ 8.234138] lock: c161c760, .magic: dead4ead, .owner: reboot/85, .owner_cpu: 0
[ 8.236132] Pid: 85, comm: reboot Not tainted 3.4.0-rc7-00656-g82163ed #5
[ 8.237965] Call Trace:
[ 8.238648] [<c13dfd20>] ? printk+0x18/0x1a
[ 8.239827] [<c122a5e0>] spin_dump+0x80/0xd0
[ 8.241016] [<c122a652>] spin_bug+0x22/0x30
[ 8.242181] [<c122a93b>] do_raw_spin_trylock+0x5b/0x70
[ 8.243611] [<c13e8bae>] _raw_spin_trylock+0xe/0x60
[ 8.244975] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0
==> [ 8.246638] [<c13922ea>] panel_scan_timer+0xba/0x570
[ 8.248019] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0
[ 8.249689] [<c102f6f5>] run_timer_softirq+0x1e5/0x370
[ 8.251191] [<c102f645>] ? run_timer_softirq+0x135/0x370
[ 8.252718] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0
[ 8.254462] [<c102a592>] __do_softirq+0xc2/0x1c0
[ 8.255758] [<c102a4d0>] ? local_bh_enable_ip+0x130/0x130
[ 8.257228] <IRQ> [<c102a855>] ? irq_exit+0x65/0x70
[ 8.258647] [<c1013ff9>] ? smp_apic_timer_interrupt+0x49/0x80
[ 8.260226] [<c13e96c1>] ? apic_timer_interrupt+0x31/0x38
[ 8.261737] [<c12700e0>] ? drm_vm_open_locked+0x70/0xb0
[ 8.263166] [<c122489a>] ? delay_tsc+0x1a/0x30
[ 8.264452] [<c12248c9>] ? __delay+0x9/0x10
[ 8.265621] [<c12248ec>] ? __const_udelay+0x1c/0x20
==> [ 8.266967] [<c139136c>] ? lcd_clear_fast_p8+0x9c/0xe0
[ 8.268386] [<c1391a66>] ? lcd_write+0x226/0x810
[ 8.269653] [<c1367900>] ? md_set_readonly+0xc0/0xc0
[ 8.271013] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0
[ 8.272470] [<c1392a98>] ? panel_lcd_print+0x38/0x40
[ 8.273837] [<c1392ace>] ? panel_notify_sys+0x2e/0x60
[ 8.275224] [<c1046634>] ? notifier_call_chain+0x84/0xb0
[ 8.276754] [<c10469ce>] ? __blocking_notifier_call_chain+0x3e/0x60
[ 8.278576] [<c1046a0a>] ? blocking_notifier_call_chain+0x1a/0x20
[ 8.280267] [<c1036a14>] ? kernel_restart_prepare+0x14/0x40
[ 8.281901] [<c1036a8e>] ? kernel_restart+0xe/0x50
[ 8.283216] [<c1036ce9>] ? sys_reboot+0x149/0x1e0
[ 8.284532] [<c10b3fb3>] ? handle_pte_fault+0x93/0xd70
[ 8.285956] [<c1019e35>] ? do_page_fault+0x215/0x5e0
[ 8.287330] [<c101a113>] ? do_page_fault+0x4f3/0x5e0
[ 8.288704] [<c1045ac6>] ? up_read+0x16/0x30
[ 8.289890] [<c101a113>] ? do_page_fault+0x4f3/0x5e0
[ 8.291252] [<c10d4486>] ? iterate_supers+0x86/0xd0
[ 8.292615] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0
[ 8.294049] [<c13e8dcd>] ? _raw_spin_unlock+0x1d/0x20
[ 8.295449] [<c10d44ab>] ? iterate_supers+0xab/0xd0
[ 8.296795] [<c10fb620>] ? __sync_filesystem+0xa0/0xa0
[ 8.298199] [<c13e9b03>] ? sysenter_do_call+0x12/0x37
[ 8.306899] Restarting system.
[ 8.307747] machine restart
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---
drivers/staging/panel/panel.c | 44 ++++++++++++++++----------------
1 file changed, 22 insertions(+), 22 deletions(-)
--- linux.orig/drivers/staging/panel/panel.c 2012-09-09 09:55:49.534161723 +0800
+++ linux/drivers/staging/panel/panel.c 2012-09-09 16:19:56.509417982 +0800
@@ -757,38 +757,38 @@ static void lcd_backlight(int on)
return;
/* The backlight is activated by setting the AUTOFEED line to +5V */
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
bits.bl = on;
panel_set_bits();
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
/* send a command to the LCD panel in serial mode */
static void lcd_write_cmd_s(int cmd)
{
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
lcd_send_serial(0x1F); /* R/W=W, RS=0 */
lcd_send_serial(cmd & 0x0F);
lcd_send_serial((cmd >> 4) & 0x0F);
udelay(40); /* the shortest command takes at least 40 us */
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
/* send data to the LCD panel in serial mode */
static void lcd_write_data_s(int data)
{
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
lcd_send_serial(0x5F); /* R/W=W, RS=1 */
lcd_send_serial(data & 0x0F);
lcd_send_serial((data >> 4) & 0x0F);
udelay(40); /* the shortest data takes at least 40 us */
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
/* send a command to the LCD panel in 8 bits parallel mode */
static void lcd_write_cmd_p8(int cmd)
{
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
/* present the data to the data port */
w_dtr(pprt, cmd);
udelay(20); /* maintain the data during 20 us before the strobe */
@@ -804,13 +804,13 @@ static void lcd_write_cmd_p8(int cmd)
set_ctrl_bits();
udelay(120); /* the shortest command takes at least 120 us */
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
/* send data to the LCD panel in 8 bits parallel mode */
static void lcd_write_data_p8(int data)
{
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
/* present the data to the data port */
w_dtr(pprt, data);
udelay(20); /* maintain the data during 20 us before the strobe */
@@ -826,27 +826,27 @@ static void lcd_write_data_p8(int data)
set_ctrl_bits();
udelay(45); /* the shortest data takes at least 45 us */
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
/* send a command to the TI LCD panel */
static void lcd_write_cmd_tilcd(int cmd)
{
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
/* present the data to the control port */
w_ctr(pprt, cmd);
udelay(60);
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
/* send data to the TI LCD panel */
static void lcd_write_data_tilcd(int data)
{
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
/* present the data to the data port */
w_dtr(pprt, data);
udelay(60);
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
static void lcd_gotoxy(void)
@@ -879,14 +879,14 @@ static void lcd_clear_fast_s(void)
lcd_addr_x = lcd_addr_y = 0;
lcd_gotoxy();
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
lcd_send_serial(0x5F); /* R/W=W, RS=1 */
lcd_send_serial(' ' & 0x0F);
lcd_send_serial((' ' >> 4) & 0x0F);
udelay(40); /* the shortest data takes at least 40 us */
}
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
lcd_addr_x = lcd_addr_y = 0;
lcd_gotoxy();
@@ -899,7 +899,7 @@ static void lcd_clear_fast_p8(void)
lcd_addr_x = lcd_addr_y = 0;
lcd_gotoxy();
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
/* present the data to the data port */
w_dtr(pprt, ' ');
@@ -921,7 +921,7 @@ static void lcd_clear_fast_p8(void)
/* the shortest data takes at least 45 us */
udelay(45);
}
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
lcd_addr_x = lcd_addr_y = 0;
lcd_gotoxy();
@@ -934,14 +934,14 @@ static void lcd_clear_fast_tilcd(void)
lcd_addr_x = lcd_addr_y = 0;
lcd_gotoxy();
- spin_lock(&pprt_lock);
+ spin_lock_irq(&pprt_lock);
for (pos = 0; pos < lcd_height * lcd_hwidth; pos++) {
/* present the data to the data port */
w_dtr(pprt, ' ');
udelay(60);
}
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
lcd_addr_x = lcd_addr_y = 0;
lcd_gotoxy();
@@ -1886,11 +1886,11 @@ static void panel_process_inputs(void)
static void panel_scan_timer(void)
{
if (keypad_enabled && keypad_initialized) {
- if (spin_trylock(&pprt_lock)) {
+ if (spin_trylock_irq(&pprt_lock)) {
phys_scan_contacts();
/* no need for the parport anymore */
- spin_unlock(&pprt_lock);
+ spin_unlock_irq(&pprt_lock);
}
if (!inputs_stable || phys_curr != phys_prev)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-09-09 8:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-09 8:23 [PATCH] Staging: panel: fix spinlock trylock failure on UP Fengguang Wu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.