From: olof@lixom.net (Olof Johansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch
Date: Mon, 1 Oct 2012 19:43:06 -0700 [thread overview]
Message-ID: <20121002024306.GA1327@quad.lixom.net> (raw)
In-Reply-To: <CA+55aFzmm=y85k81kAfgiuBb=oaFxi0f83hFb32Y2tTHu1wozw@mail.gmail.com>
On Mon, Oct 01, 2012 at 07:26:26PM -0700, Linus Torvalds wrote:
> On Mon, Oct 1, 2012 at 7:22 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> >
> > Ok, I've merged them all. As usual, my end result is slightly
> > different from yours, although the differences are pretty small.
>
> Oh, one more thing: I suspect the OMAP_OCP2SCP config option should
> depend on CONFIG_ARM or something. Just based on the name, I assume it
> doesn't actually work on x86-64, but I see the question..
Ah, yes. It should build fine and not cause breakage, but it's largely
pointless to offer the option. Patch below.
-Olof
>From 5ae0b658cc10af29d7a0a66f2a412a754011ca0e Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@lixom.net>
Date: Mon, 1 Oct 2012 19:39:33 -0700
Subject: [PATCH] drivers/bus: make ocp2scp depend on OMAP2+
No use in enabling the driver on platforms where it won't be useful.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Tony Lindgren <tony@atomide.com>
---
drivers/bus/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index bbec35d..0f51ed6 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -6,6 +6,7 @@ menu "Bus devices"
config OMAP_OCP2SCP
tristate "OMAP OCP2SCP DRIVER"
+ depends on ARCH_OMAP2PLUS
help
Driver to enable ocp2scp module which transforms ocp interface
protocol to scp protocol. In OMAP4, USB PHY is connected via
--
1.7.10.1.488.g05fbf7a
WARNING: multiple messages have this Message-ID (diff)
From: Olof Johansson <olof@lixom.net>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: arm@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, tony@atomide.com
Subject: Re: [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch
Date: Mon, 1 Oct 2012 19:43:06 -0700 [thread overview]
Message-ID: <20121002024306.GA1327@quad.lixom.net> (raw)
In-Reply-To: <CA+55aFzmm=y85k81kAfgiuBb=oaFxi0f83hFb32Y2tTHu1wozw@mail.gmail.com>
On Mon, Oct 01, 2012 at 07:26:26PM -0700, Linus Torvalds wrote:
> On Mon, Oct 1, 2012 at 7:22 PM, Linus Torvalds
> <torvalds@linux-foundation.org> wrote:
> >
> > Ok, I've merged them all. As usual, my end result is slightly
> > different from yours, although the differences are pretty small.
>
> Oh, one more thing: I suspect the OMAP_OCP2SCP config option should
> depend on CONFIG_ARM or something. Just based on the name, I assume it
> doesn't actually work on x86-64, but I see the question..
Ah, yes. It should build fine and not cause breakage, but it's largely
pointless to offer the option. Patch below.
-Olof
>From 5ae0b658cc10af29d7a0a66f2a412a754011ca0e Mon Sep 17 00:00:00 2001
From: Olof Johansson <olof@lixom.net>
Date: Mon, 1 Oct 2012 19:39:33 -0700
Subject: [PATCH] drivers/bus: make ocp2scp depend on OMAP2+
No use in enabling the driver on platforms where it won't be useful.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Tony Lindgren <tony@atomide.com>
---
drivers/bus/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index bbec35d..0f51ed6 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -6,6 +6,7 @@ menu "Bus devices"
config OMAP_OCP2SCP
tristate "OMAP OCP2SCP DRIVER"
+ depends on ARCH_OMAP2PLUS
help
Driver to enable ocp2scp module which transforms ocp interface
protocol to scp protocol. In OMAP4, USB PHY is connected via
--
1.7.10.1.488.g05fbf7a
next prev parent reply other threads:[~2012-10-02 2:43 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-01 23:56 [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch Olof Johansson
2012-10-01 23:56 ` Olof Johansson
2012-10-01 23:56 ` [GIT PULL 1/12] ARM: soc: non-critical bug fixes Olof Johansson
2012-10-01 23:56 ` Olof Johansson
2012-10-01 23:56 ` [GIT PULL 2/12] ARM: soc: general cleanups Olof Johansson
2012-10-01 23:56 ` Olof Johansson
2012-10-01 23:56 ` [GIT PULL 3/12] ARM: soc: MAINTAINERS updates Olof Johansson
2012-10-01 23:56 ` Olof Johansson
2012-10-01 23:56 ` [GIT PULL 4/12] ARM: soc: soc-specific updates Olof Johansson
2012-10-01 23:56 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 5/12] ARM: soc: device tree updates Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 6/12] ARM: soc: cleanups, part 2 Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 7/12] ARM: soc: soc-specific updates, take 2 Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 8/12] ARM: soc: driver specific changes Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 9/12] ARM: soc: board specific updates Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 10/12] ARM: soc: device tree updates, take 2 Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 11/12] ARM: soc: documentation updates Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-01 23:57 ` [GIT PULL 12/12] ARM: soc: multiplatform enablement Olof Johansson
2012-10-01 23:57 ` Olof Johansson
2012-10-02 2:22 ` [GIT PULL 0/12] ARM: soc: updates for 3.7, first batch Linus Torvalds
2012-10-02 2:22 ` Linus Torvalds
2012-10-02 2:26 ` Linus Torvalds
2012-10-02 2:26 ` Linus Torvalds
2012-10-02 2:43 ` Olof Johansson [this message]
2012-10-02 2:43 ` Olof Johansson
2012-10-02 2:34 ` Olof Johansson
2012-10-02 2:34 ` Olof Johansson
2012-10-02 3:03 ` Tony Lindgren
2012-10-02 3:03 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121002024306.GA1327@quad.lixom.net \
--to=olof@lixom.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.