* [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU.
@ 2012-10-04 12:36 Alexander Shiyan
2012-10-04 12:37 ` [PATCH 2/3] Add more generated files to .gitignore Alexander Shiyan
` (2 more replies)
0 siblings, 3 replies; 16+ messages in thread
From: Alexander Shiyan @ 2012-10-04 12:36 UTC (permalink / raw)
To: barebox
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/cpu/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig
index f55e862..2ed6789 100644
--- a/arch/arm/cpu/Kconfig
+++ b/arch/arm/cpu/Kconfig
@@ -17,7 +17,7 @@ config CPU_ARM920T
and is used in the Maverick EP9312 and the Samsung S3C2410.
More information on the Maverick EP9312 at
- <http://linuxdevices.com/products/PD2382866068.html>.
+ <http://www.cirrus.com/en/products/ep9312.html>.
Say Y if you want support for the ARM920T processor.
Otherwise, say N.
--
1.7.3.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH 2/3] Add more generated files to .gitignore 2012-10-04 12:36 [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Alexander Shiyan @ 2012-10-04 12:37 ` Alexander Shiyan 2012-10-04 12:53 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 12:37 ` [PATCH 3/3] ARM: Add CLPS711X architecture Alexander Shiyan 2012-10-05 11:50 ` [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Sascha Hauer 2 siblings, 1 reply; 16+ messages in thread From: Alexander Shiyan @ 2012-10-04 12:37 UTC (permalink / raw) To: barebox Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- .gitignore | 11 ++--------- 1 files changed, 2 insertions(+), 9 deletions(-) diff --git a/.gitignore b/.gitignore index 4154c73..3fded4e 100644 --- a/.gitignore +++ b/.gitignore @@ -26,19 +26,11 @@ # tags TAGS +barebox* cross_arch cross_compile -barebox -barebox.S -barebox.bin -barebox.srec -barebox.netx -barebox.s5p -barebox.ubl -barebox.map System.map Module.symvers -barebox_default_env* # # Generated include files @@ -67,3 +59,4 @@ cscope.* scripts/gen_netx_image scripts/s5p_cksum scripts/bareboxenv-target +scripts/kconfig/zconf.lex.c -- 1.7.3.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 2/3] Add more generated files to .gitignore 2012-10-04 12:37 ` [PATCH 2/3] Add more generated files to .gitignore Alexander Shiyan @ 2012-10-04 12:53 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 13:04 ` Re[2]: " Alexander Shiyan 0 siblings, 1 reply; 16+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 12:53 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On 16:37 Thu 04 Oct , Alexander Shiyan wrote: > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- > .gitignore | 11 ++--------- > 1 files changed, 2 insertions(+), 9 deletions(-) > > diff --git a/.gitignore b/.gitignore > index 4154c73..3fded4e 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -26,19 +26,11 @@ > # > tags > TAGS > +barebox* > cross_arch > cross_compile > -barebox > -barebox.S > -barebox.bin > -barebox.srec > -barebox.netx > -barebox.s5p > -barebox.ubl > -barebox.map > System.map > Module.symvers > -barebox_default_env* > > # > # Generated include files > @@ -67,3 +59,4 @@ cscope.* > scripts/gen_netx_image > scripts/s5p_cksum > scripts/bareboxenv-target > +scripts/kconfig/zconf.lex.c already ignored Best Regards, J. > -- > 1.7.3.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re[2]: [PATCH 2/3] Add more generated files to .gitignore 2012-10-04 12:53 ` Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 13:04 ` Alexander Shiyan 2012-10-04 13:20 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 1 reply; 16+ messages in thread From: Alexander Shiyan @ 2012-10-04 13:04 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox Thu, 4 Oct 2012 14:53:28 +0200 от Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>: > On 16:37 Thu 04 Oct , Alexander Shiyan wrote: ... > > diff --git a/.gitignore b/.gitignore > > index 4154c73..3fded4e 100644 > > --- a/.gitignore > > +++ b/.gitignore > > @@ -26,19 +26,11 @@ > > # > > tags > > TAGS > > +barebox* > > cross_arch > > cross_compile > > -barebox > > -barebox.S > > -barebox.bin > > -barebox.srec > > -barebox.netx > > -barebox.s5p > > -barebox.ubl > > -barebox.map > > System.map > > Module.symvers > > -barebox_default_env* > > > > # > > # Generated include files > > @@ -67,3 +59,4 @@ cscope.* > > scripts/gen_netx_image > > scripts/s5p_cksum > > scripts/bareboxenv-target > > +scripts/kconfig/zconf.lex.c > already ignored shc@shc /home/git/bb_clps2 $ git status # On branch my # Untracked files: # (use "git add <file>..." to include in what will be committed) # # scripts/kconfig/zconf.lex.c no changes added to commit (use "git add" and/or "git commit -a") _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 2/3] Add more generated files to .gitignore 2012-10-04 13:04 ` Re[2]: " Alexander Shiyan @ 2012-10-04 13:20 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 16+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 13:20 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On 17:04 Thu 04 Oct , Alexander Shiyan wrote: > Thu, 4 Oct 2012 14:53:28 +0200 от Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>: > > On 16:37 Thu 04 Oct , Alexander Shiyan wrote: > ... > > > diff --git a/.gitignore b/.gitignore > > > index 4154c73..3fded4e 100644 > > > --- a/.gitignore > > > +++ b/.gitignore > > > @@ -26,19 +26,11 @@ > > > # > > > tags > > > TAGS > > > +barebox* > > > cross_arch > > > cross_compile > > > -barebox > > > -barebox.S > > > -barebox.bin > > > -barebox.srec > > > -barebox.netx > > > -barebox.s5p > > > -barebox.ubl > > > -barebox.map > > > System.map > > > Module.symvers > > > -barebox_default_env* > > > > > > # > > > # Generated include files > > > @@ -67,3 +59,4 @@ cscope.* > > > scripts/gen_netx_image > > > scripts/s5p_cksum > > > scripts/bareboxenv-target > > > +scripts/kconfig/zconf.lex.c > > already ignored > > shc@shc /home/git/bb_clps2 $ git status > # On branch my > # Untracked files: > # (use "git add <file>..." to include in what will be committed) > # > # scripts/kconfig/zconf.lex.c > no changes added to commit (use "git add" and/or "git commit -a") so your tree is not uptodate 83 Sep30 vj ├─>[PATCH 5/9] add gitignore file Best Regards, J. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-04 12:36 [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Alexander Shiyan 2012-10-04 12:37 ` [PATCH 2/3] Add more generated files to .gitignore Alexander Shiyan @ 2012-10-04 12:37 ` Alexander Shiyan 2012-10-04 12:52 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-05 12:12 ` Sascha Hauer 2012-10-05 11:50 ` [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Sascha Hauer 2 siblings, 2 replies; 16+ messages in thread From: Alexander Shiyan @ 2012-10-04 12:37 UTC (permalink / raw) To: barebox This patch adds new architecture (CLPS711X) into barebox. The core-logic functionality of the device is built around an ARM720T processor running at clock speeds up to 90 MHz and 74 MHz. Patch also adds a generic board support (CLEP7212, Linux ARM ID=91) and serial driver for this CPU. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> --- arch/arm/Kconfig | 6 + arch/arm/Makefile | 2 + arch/arm/boards/clep7212/Makefile | 1 + arch/arm/boards/clep7212/clep7212.c | 62 +++++ arch/arm/boards/clep7212/config.h | 4 + arch/arm/boards/clep7212/env/bin/boot | 9 + arch/arm/boards/clep7212/env/bin/flash_partition | 21 ++ arch/arm/boards/clep7212/env/bin/init | 22 ++ arch/arm/boards/clep7212/env/bin/update_kernel | 8 + arch/arm/boards/clep7212/env/bin/update_rootfs | 8 + arch/arm/boards/clep7212/env/config | 4 + arch/arm/configs/clep7212_defconfig | 43 ++++ arch/arm/cpu/Kconfig | 15 ++ arch/arm/mach-clps711x/Kconfig | 26 ++ arch/arm/mach-clps711x/Makefile | 1 + arch/arm/mach-clps711x/clock.c | 111 +++++++++ arch/arm/mach-clps711x/devices.c | 58 +++++ arch/arm/mach-clps711x/include/mach/clkdev.h | 7 + arch/arm/mach-clps711x/include/mach/clps711x.h | 283 ++++++++++++++++++++++ arch/arm/mach-clps711x/include/mach/devices.h | 7 + arch/arm/mach-clps711x/lowlevel_init.c | 61 +++++ drivers/serial/Kconfig | 5 + drivers/serial/Makefile | 1 + drivers/serial/serial_clps711x.c | 119 +++++++++ 24 files changed, 884 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boards/clep7212/Makefile create mode 100644 arch/arm/boards/clep7212/clep7212.c create mode 100644 arch/arm/boards/clep7212/config.h create mode 100644 arch/arm/boards/clep7212/env/bin/boot create mode 100644 arch/arm/boards/clep7212/env/bin/flash_partition create mode 100644 arch/arm/boards/clep7212/env/bin/init create mode 100644 arch/arm/boards/clep7212/env/bin/update_kernel create mode 100644 arch/arm/boards/clep7212/env/bin/update_rootfs create mode 100644 arch/arm/boards/clep7212/env/config create mode 100644 arch/arm/configs/clep7212_defconfig create mode 100644 arch/arm/mach-clps711x/Kconfig create mode 100644 arch/arm/mach-clps711x/Makefile create mode 100644 arch/arm/mach-clps711x/clock.c create mode 100644 arch/arm/mach-clps711x/devices.c create mode 100644 arch/arm/mach-clps711x/include/mach/clkdev.h create mode 100644 arch/arm/mach-clps711x/include/mach/clps711x.h create mode 100644 arch/arm/mach-clps711x/include/mach/devices.h create mode 100644 arch/arm/mach-clps711x/lowlevel_init.c create mode 100644 drivers/serial/serial_clps711x.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a54ad03..0bd902a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -31,6 +31,11 @@ config ARCH_AT91 select HAS_DEBUG_LL select HAVE_MACH_ARM_HEAD +config ARCH_CLPS711X + bool "Cirrus Logic EP711x/EP721x/EP731x" + select CLKDEV_LOOKUP + select CPU_ARM720T + config ARCH_EP93XX bool "Cirrus Logic EP93xx" select CPU_ARM920T @@ -96,6 +101,7 @@ endchoice source arch/arm/cpu/Kconfig source arch/arm/mach-at91/Kconfig +source arch/arm/mach-clps711x/Kconfig source arch/arm/mach-ep93xx/Kconfig source arch/arm/mach-imx/Kconfig source arch/arm/mach-mxs/Kconfig diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 8e660be..d9ddbfb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2) # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) := at91 +machine-$(CONFIG_ARCH_CLPS711X) := clps711x machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_MXS) := mxs @@ -75,6 +76,7 @@ board-$(CONFIG_MACH_AT91SAM9G10EK) := at91sam9261ek board-$(CONFIG_MACH_AT91SAM9G20EK) := at91sam9260ek board-$(CONFIG_MACH_AT91SAM9X5EK) := at91sam9x5ek board-$(CONFIG_MACH_AT91SAM9M10G45EK) := at91sam9m10g45ek +board-$(CONFIG_MACH_CLEP7212) := clep7212 board-$(CONFIG_MACH_DSS11) := dss11 board-$(CONFIG_MACH_EDB9301) := edb93xx board-$(CONFIG_MACH_EDB9302) := edb93xx diff --git a/arch/arm/boards/clep7212/Makefile b/arch/arm/boards/clep7212/Makefile new file mode 100644 index 0000000..676e867 --- /dev/null +++ b/arch/arm/boards/clep7212/Makefile @@ -0,0 +1 @@ +obj-y += clep7212.o diff --git a/arch/arm/boards/clep7212/clep7212.c b/arch/arm/boards/clep7212/clep7212.c new file mode 100644 index 0000000..1211ebe --- /dev/null +++ b/arch/arm/boards/clep7212/clep7212.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <driver.h> +#include <init.h> +#include <partition.h> +#include <io.h> +#include <sizes.h> +#include <asm/armlinux.h> +#include <generated/mach-types.h> + +#include <mach/clps711x.h> +#include <mach/devices.h> + +static int clps711x_mem_init(void) +{ + ulong memsize = get_ram_size((ulong *)SDRAM_BASE, SZ_32M); + + arm_add_mem_device("ram0", SDRAM_BASE, memsize); + + return 0; +} +mem_initcall(clps711x_mem_init); + +static int clps711x_devices_init(void) +{ + /* Setup Chipselects */ + setup_memcfg(0, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_16); + setup_memcfg(1, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_8); + setup_memcfg(2, MEMCFG_WAITSTATE_8_3 | MEMCFG_BUS_WIDTH_16 | + MEMCFG_CLKENB); + setup_memcfg(3, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_16); + + add_cfi_flash_device(DEVICE_ID_DYNAMIC, CS0_BASE, SZ_32M, 0); + + devfs_add_partition("nor0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, + "self0"); + devfs_add_partition("nor0", SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED, + "env0"); + + armlinux_set_bootparams((void *)SDRAM_BASE + 0x100); + armlinux_set_architecture(MACH_TYPE_CLEP7212); + armlinux_set_serial(readl(UNIQID)); + + return 0; +} +device_initcall(clps711x_devices_init); + +static int clps711x_console_init(void) +{ + register_uart(0); + + return 0; +} +console_initcall(clps711x_console_init); diff --git a/arch/arm/boards/clep7212/config.h b/arch/arm/boards/clep7212/config.h new file mode 100644 index 0000000..6ae9a40 --- /dev/null +++ b/arch/arm/boards/clep7212/config.h @@ -0,0 +1,4 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +#endif /* __CONFIG_H */ diff --git a/arch/arm/boards/clep7212/env/bin/boot b/arch/arm/boards/clep7212/env/bin/boot new file mode 100644 index 0000000..c3f12ce --- /dev/null +++ b/arch/arm/boards/clep7212/env/bin/boot @@ -0,0 +1,9 @@ +#!/bin/sh + +. /env/config + +bootargs_mtd="mtdparts=physmap-flash.0:${nor_parts};mtd-ram.0:-(ramdisk)" + +bootargs="${bootargs_common} ${bootargs_mtd} root=/dev/mtdblock4" + +bootm /dev/nor0.kernel diff --git a/arch/arm/boards/clep7212/env/bin/flash_partition b/arch/arm/boards/clep7212/env/bin/flash_partition new file mode 100644 index 0000000..65aece8 --- /dev/null +++ b/arch/arm/boards/clep7212/env/bin/flash_partition @@ -0,0 +1,21 @@ +#!/bin/sh + +if [ $# != 2 ]; then + echo "Usage: $0 <image> <partition>" + exit 1 +fi + +image=$1 +partition=$2 + +echo "Unlocking ${partition}" +unprotect ${partition} + +echo "Erasing ${partition}" +erase ${partition} + +echo "Flashing ${image} to ${partition}" +cp ${image} ${partition} + +echo "Locking ${partition}" +protect ${partition} diff --git a/arch/arm/boards/clep7212/env/bin/init b/arch/arm/boards/clep7212/env/bin/init new file mode 100644 index 0000000..8bbe847 --- /dev/null +++ b/arch/arm/boards/clep7212/env/bin/init @@ -0,0 +1,22 @@ +#!/bin/sh + +PATH=/env/bin +export PATH + +. /env/config + +addpart /dev/nor0 ${nor_parts} + +if [ -f /env/unsaved ]; then + rm /env/unsaved + saveenv +fi + +echo +echo -n "Hit any key to stop autoboot: " +timeout -a $autoboot_timeout +if [ $? != 0 ]; then + exit 0 +fi + +boot diff --git a/arch/arm/boards/clep7212/env/bin/update_kernel b/arch/arm/boards/clep7212/env/bin/update_kernel new file mode 100644 index 0000000..20c3b7d --- /dev/null +++ b/arch/arm/boards/clep7212/env/bin/update_kernel @@ -0,0 +1,8 @@ +#!/bin/sh + +if [ $# != 1 ]; then + echo "Usage: $0 <file>" + exit 1 +fi + +flash_partition $1 /dev/nor0.kernel diff --git a/arch/arm/boards/clep7212/env/bin/update_rootfs b/arch/arm/boards/clep7212/env/bin/update_rootfs new file mode 100644 index 0000000..609353a --- /dev/null +++ b/arch/arm/boards/clep7212/env/bin/update_rootfs @@ -0,0 +1,8 @@ +#!/bin/sh + +if [ $# != 1 ]; then + echo "Usage: $0 <file>" + exit 1 +fi + +flash_partition $1 /dev/nor0.root diff --git a/arch/arm/boards/clep7212/env/config b/arch/arm/boards/clep7212/env/config new file mode 100644 index 0000000..6f15ee4 --- /dev/null +++ b/arch/arm/boards/clep7212/env/config @@ -0,0 +1,4 @@ +board=clep7212 +autoboot_timeout=3 +bootargs_common="earlyprintk console=ttyCL0,57600n8" +nor_parts="256k(barebox)ro,256k(env),3584k(kernel),-(root)" diff --git a/arch/arm/configs/clep7212_defconfig b/arch/arm/configs/clep7212_defconfig new file mode 100644 index 0000000..c973629 --- /dev/null +++ b/arch/arm/configs/clep7212_defconfig @@ -0,0 +1,43 @@ +CONFIG_ARCH_CLPS711X=y +CONFIG_AEABI=y +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y +CONFIG_BAUDRATE=57600 +CONFIG_GLOB=y +CONFIG_GLOB_SORT=y +CONFIG_CMDLINE_EDITING=y +CONFIG_AUTO_COMPLETE=y +CONFIG_DEFAULT_ENVIRONMENT_COMPRESSED_LZO=y +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/clep7212/env" +CONFIG_ENABLE_FLASH_NOISE=y +CONFIG_ENABLE_PARTITION_NOISE=y +CONFIG_ENABLE_DEVICE_NOISE=y +CONFIG_CMD_SAVEENV=y +CONFIG_CMD_EXPORT=y +CONFIG_CMD_PRINTENV=y +CONFIG_CMD_GLOBAL=y +CONFIG_CMD_AUTOMOUNT=y +CONFIG_CMD_BASENAME=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_FLASH=y +CONFIG_CMD_BOOTM_SHOW_TYPE=y +CONFIG_CMD_BOOTM_INITRD=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_BOOTU is not set +CONFIG_FLEXIBLE_BOOTARGS=y +CONFIG_CMD_TIMEOUT=y +CONFIG_CMD_PARTITION=y +CONFIG_CMD_MAGICVAR=y +CONFIG_CMD_MAGICVAR_HELP=y +# CONFIG_SPI is not set +CONFIG_DRIVER_CFI=y +# CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set +# CONFIG_DRIVER_CFI_BANK_WIDTH_4 is not set +CONFIG_MTD=y +CONFIG_DISK=y +CONFIG_DISK_WRITE=y +CONFIG_DISK_INTF_PLATFORM_IDE=y +CONFIG_FS_CRAMFS=y +CONFIG_FS_FAT=y +CONFIG_FS_FAT_LFN=y +CONFIG_LZO_DECOMPRESS=y diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig index 2ed6789..e732775 100644 --- a/arch/arm/cpu/Kconfig +++ b/arch/arm/cpu/Kconfig @@ -8,6 +8,21 @@ config CPU_32 # which CPUs we support in the kernel image, and the compiler instruction # optimiser behaviour. +# ARM720T +config CPU_ARM720T + bool + select CPU_32v4T + help + The EP7312 is designed for ultra-low-power applications such as + portable handheld devices that require digital audio decompression + capability, Internet appliances and low-power industrial controls. + + More information on the Cirrus Logic EP7312 at + <http://www.cirrus.com/en/products/ep7312.html>. + + Say Y if you want support for the ARM720T processor. + Otherwise, say N. + # ARM920T config CPU_ARM920T bool diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig new file mode 100644 index 0000000..45ac017 --- /dev/null +++ b/arch/arm/mach-clps711x/Kconfig @@ -0,0 +1,26 @@ +if ARCH_CLPS711X + +choice + prompt "Cirrus Logic EP711x/EP721x/EP731x Board Type" + +config MACH_CLEP7212 + bool "Cirrus Logic CLEP7212" + select MACH_HAS_LOWLEVEL_INIT + select MACH_DO_LOWLEVEL_INIT + help + Boards based on the Cirrus Logic 7212/7312 chips + +endchoice + +config BOARDINFO + default "Cirrus Logic CLEP7212" + +config ARCH_TEXT_BASE + hex + default 0xc0780000 + +config BAREBOX_MAX_IMAGE_SIZE + hex + default 0x00080000 + +endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile new file mode 100644 index 0000000..cb18e34 --- /dev/null +++ b/arch/arm/mach-clps711x/Makefile @@ -0,0 +1 @@ +obj-y += clock.o devices.o lowlevel_init.o diff --git a/arch/arm/mach-clps711x/clock.c b/arch/arm/mach-clps711x/clock.c new file mode 100644 index 0000000..acc8623 --- /dev/null +++ b/arch/arm/mach-clps711x/clock.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <init.h> +#include <clock.h> +#include <asm/io.h> +#include <linux/clkdev.h> + +#include <mach/clps711x.h> + +struct clk { + unsigned long rate; +}; + +static struct clk uart_clk, bus_clk; + +uint64_t clocksource_read(void) +{ + return 0xffff - readw(TC2D); +} + +static struct clocksource cs = { + .read = clocksource_read, + .mask = CLOCKSOURCE_MASK(16), +}; + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +/* Enable and Disable do nothing */ +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +static int clocks_init(void) +{ + int osc, ext, pll, cpu, timer; + u32 tmp; + + osc = 3686400; + ext = 13000000; + + tmp = readl(PLLR) >> 24; + if (tmp) + pll = (osc * tmp) / 2; + else + pll = 73728000; /* Default value for old CPUs */ + + tmp = readl(SYSFLG2); + if (tmp & SYSFLG2_CKMODE) { + cpu = ext; + bus_clk.rate = cpu; + } else { + cpu = pll; + if (cpu >= 36864000) + bus_clk.rate = cpu / 2; + else + bus_clk.rate = 36864000 / 2; + } + + uart_clk.rate = bus_clk.rate / 10; + + if (tmp & SYSFLG2_CKMODE) { + tmp = readw(SYSCON2); + if (tmp & SYSCON2_OSTB) + timer = ext / 26; + else + timer = 541440; + } else + timer = cpu / 144; + + tmp = readl(SYSCON1); + tmp &= ~SYSCON1_TC2M; /* Free running mode */ + tmp |= SYSCON1_TC2S; /* High frequency source */ + writel(tmp, SYSCON1); + + clocks_calc_mult_shift(&cs.mult, &cs.shift, timer, NSEC_PER_SEC, 10); + + return init_clock(&cs); +} +core_initcall(clocks_init); + +static struct clk_lookup clocks_lookups[] = { + CLKDEV_CON_ID("bus", &bus_clk), + CLKDEV_CON_ID("uart", &uart_clk), +}; + +static int clkdev_init(void) +{ + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups)); + + return 0; +} +postcore_initcall(clkdev_init); diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c new file mode 100644 index 0000000..2aecc2b --- /dev/null +++ b/arch/arm/mach-clps711x/devices.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <init.h> + +#include <asm/io.h> + +#include <mach/clps711x.h> + +void _setup_memcfg(int bank, u32 addr, u32 val) +{ + u32 tmp = readl(addr); + + switch (bank) { + case 0: + tmp &= ~(0xff << 0); + tmp |= val << 0; + break; + case 1: + tmp &= ~(0xff << 8); + tmp |= val << 8; + break; + case 2: + tmp &= ~(0xff << 16); + tmp |= val << 16; + break; + case 3: + tmp &= ~(0xff << 24); + tmp |= val << 24; + break; + } + + writel(tmp, addr); +} + +void setup_memcfg(int bank, u32 val) +{ + switch (bank) { + case 0 ... 3: + _setup_memcfg(bank, MEMCFG1, val); + break; + case 4 ... 7: + _setup_memcfg(bank - 4, MEMCFG2, val); + break; + } +} + +void register_uart(unsigned int id) +{ + add_generic_device_res("clps711x_serial", id, NULL, 0, NULL); +} diff --git a/arch/arm/mach-clps711x/include/mach/clkdev.h b/arch/arm/mach-clps711x/include/mach/clkdev.h new file mode 100644 index 0000000..9278209 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h new file mode 100644 index 0000000..ac6edfb --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -0,0 +1,283 @@ +/* + * Hardware definitions for Cirrus Logic CLPS711X + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __MACH_CLPS711X_H +#define __MACH_CLPS711X_H + +#define CS0_BASE (0x00000000) +#define CS1_BASE (0x10000000) +#define CS2_BASE (0x20000000) +#define CS3_BASE (0x30000000) +#define CS4_BASE (0x40000000) +#define CS5_BASE (0x50000000) +#define CS6_BASE (0x60000000) +#define CS7_BASE (0x70000000) +#define REGS_BASE (0x80000000) +#define SDRAM_BASE (0xc0000000) + +#define PADR (REGS_BASE + 0x0000) +#define PBDR (REGS_BASE + 0x0001) +#define PCDR (REGS_BASE + 0x0002) +#define PDDR (REGS_BASE + 0x0003) +#define PADDR (REGS_BASE + 0x0040) +#define PBDDR (REGS_BASE + 0x0041) +#define PCDDR (REGS_BASE + 0x0042) +#define PDDDR (REGS_BASE + 0x0043) +#define PEDR (REGS_BASE + 0x0083) +#define PEDDR (REGS_BASE + 0x00c3) +#define SYSCON1 (REGS_BASE + 0x0100) +#define SYSFLG1 (REGS_BASE + 0x0140) +#define MEMCFG1 (REGS_BASE + 0x0180) +#define MEMCFG2 (REGS_BASE + 0x01c0) +#define DRFPR (REGS_BASE + 0x0200) +#define INTSR1 (REGS_BASE + 0x0240) +#define INTMR1 (REGS_BASE + 0x0280) +#define LCDCON (REGS_BASE + 0x02c0) +#define TC1D (REGS_BASE + 0x0300) +#define TC2D (REGS_BASE + 0x0340) +#define RTCDR (REGS_BASE + 0x0380) +#define RTCMR (REGS_BASE + 0x03c0) +#define PMPCON (REGS_BASE + 0x0400) +#define CODR (REGS_BASE + 0x0440) +#define UARTDR1 (REGS_BASE + 0x0480) +#define UBRLCR1 (REGS_BASE + 0x04c0) +#define SYNCIO (REGS_BASE + 0x0500) +#define PALLSW (REGS_BASE + 0x0540) +#define PALMSW (REGS_BASE + 0x0580) +#define STFCLR (REGS_BASE + 0x05c0) +#define BLEOI (REGS_BASE + 0x0600) +#define MCEOI (REGS_BASE + 0x0640) +#define TEOI (REGS_BASE + 0x0680) +#define TC1EOI (REGS_BASE + 0x06c0) +#define TC2EOI (REGS_BASE + 0x0700) +#define RTCEOI (REGS_BASE + 0x0740) +#define UMSEOI (REGS_BASE + 0x0780) +#define COEOI (REGS_BASE + 0x07c0) +#define HALT (REGS_BASE + 0x0800) +#define STDBY (REGS_BASE + 0x0840) + +#define FBADDR (REGS_BASE + 0x1000) +#define SYSCON2 (REGS_BASE + 0x1100) +#define SYSFLG2 (REGS_BASE + 0x1140) +#define INTSR2 (REGS_BASE + 0x1240) +#define INTMR2 (REGS_BASE + 0x1280) +#define UARTDR2 (REGS_BASE + 0x1480) +#define UBRLCR2 (REGS_BASE + 0x14c0) +#define SS2DR (REGS_BASE + 0x1500) +#define SRXEOF (REGS_BASE + 0x1600) +#define SS2POP (REGS_BASE + 0x16c0) +#define KBDEOI (REGS_BASE + 0x1700) + +#define DAIR (REGS_BASE + 0x2000) +#define DAIDR0 (REGS_BASE + 0x2040) +#define DAIDR1 (REGS_BASE + 0x2080) +#define DAIDR2 (REGS_BASE + 0x20c0) +#define DAISR (REGS_BASE + 0x2100) +#define SYSCON3 (REGS_BASE + 0x2200) +#define INTSR3 (REGS_BASE + 0x2240) +#define INTMR3 (REGS_BASE + 0x2280) +#define LEDFLSH (REGS_BASE + 0x22c0) +#define SDCONF (REGS_BASE + 0x2300) +#define SDRFPR (REGS_BASE + 0x2340) +#define UNIQID (REGS_BASE + 0x2440) +#define DAI64FS (REGS_BASE + 0x2600) +#define PLLW (REGS_BASE + 0x2610) +#define PLLR (REGS_BASE + 0xa5a8) +#define RANDID0 (REGS_BASE + 0x2700) +#define RANDID1 (REGS_BASE + 0x2704) +#define RANDID2 (REGS_BASE + 0x2708) +#define RANDID3 (REGS_BASE + 0x270c) + +/* common bits: SYSCON1 / SYSCON2 */ +#define SYSCON_UARTEN (1 << 8) + +#define SYSCON1_KBDSCAN(x) ((x) & 15) +#define SYSCON1_KBDSCANMASK (15) +#define SYSCON1_TC1M (1 << 4) +#define SYSCON1_TC1S (1 << 5) +#define SYSCON1_TC2M (1 << 6) +#define SYSCON1_TC2S (1 << 7) +#define SYSCON1_UART1EN SYSCON_UARTEN +#define SYSCON1_BZTOG (1 << 9) +#define SYSCON1_BZMOD (1 << 10) +#define SYSCON1_DBGEN (1 << 11) +#define SYSCON1_LCDEN (1 << 12) +#define SYSCON1_CDENTX (1 << 13) +#define SYSCON1_CDENRX (1 << 14) +#define SYSCON1_SIREN (1 << 15) +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) +#define SYSCON1_ADCKSEL_MASK (3 << 16) +#define SYSCON1_EXCKEN (1 << 18) +#define SYSCON1_WAKEDIS (1 << 19) +#define SYSCON1_IRTXM (1 << 20) + +/* common bits: SYSFLG1 / SYSFLG2 */ +#define SYSFLG_UBUSY (1 << 11) +#define SYSFLG_URXFE (1 << 22) +#define SYSFLG_UTXFF (1 << 23) + +#define SYSFLG1_MCDR (1 << 0) +#define SYSFLG1_DCDET (1 << 1) +#define SYSFLG1_WUDR (1 << 2) +#define SYSFLG1_WUON (1 << 3) +#define SYSFLG1_CTS (1 << 8) +#define SYSFLG1_DSR (1 << 9) +#define SYSFLG1_DCD (1 << 10) +#define SYSFLG1_UBUSY SYSFLG_UBUSY +#define SYSFLG1_NBFLG (1 << 12) +#define SYSFLG1_RSTFLG (1 << 13) +#define SYSFLG1_PFFLG (1 << 14) +#define SYSFLG1_CLDFLG (1 << 15) +#define SYSFLG1_URXFE SYSFLG_URXFE +#define SYSFLG1_UTXFF SYSFLG_UTXFF +#define SYSFLG1_CRXFE (1 << 24) +#define SYSFLG1_CTXFF (1 << 25) +#define SYSFLG1_SSIBUSY (1 << 26) +#define SYSFLG1_ID (1 << 29) +#define SYSFLG1_VERID(x) (((x) >> 30) & 3) +#define SYSFLG1_VERID_MASK (3 << 30) + +#define SYSFLG2_SSRXOF (1 << 0) +#define SYSFLG2_RESVAL (1 << 1) +#define SYSFLG2_RESFRM (1 << 2) +#define SYSFLG2_SS2RXFE (1 << 3) +#define SYSFLG2_SS2TXFF (1 << 4) +#define SYSFLG2_SS2TXUF (1 << 5) +#define SYSFLG2_CKMODE (1 << 6) +#define SYSFLG2_UBUSY SYSFLG_UBUSY +#define SYSFLG2_URXFE SYSFLG_URXFE +#define SYSFLG2_UTXFF SYSFLG_UTXFF + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +#define SYSCON2_SERSEL (1 << 0) +#define SYSCON2_KBD6 (1 << 1) +#define SYSCON2_DRAMZ (1 << 2) +#define SYSCON2_KBWEN (1 << 3) +#define SYSCON2_SS2TXEN (1 << 4) +#define SYSCON2_PCCARD1 (1 << 5) +#define SYSCON2_PCCARD2 (1 << 6) +#define SYSCON2_SS2RXEN (1 << 7) +#define SYSCON2_UART2EN SYSCON_UARTEN +#define SYSCON2_SS2MAEN (1 << 9) +#define SYSCON2_OSTB (1 << 12) +#define SYSCON2_CLKENSL (1 << 13) +#define SYSCON2_BUZFREQ (1 << 14) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#define DAIR_RESERVED (0x0404) +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define DAI64FS_I2SF64 (1 << 0) +#define DAI64FS_AUDIOCLKEN (1 << 1) +#define DAI64FS_AUDIOCLKSRC (1 << 2) +#define DAI64FS_MCLK256EN (1 << 3) +#define DAI64FS_LOOPBACK (1 << 5) +#define DAI64FS_AUDIV_MASK (0x7f) +#define DAI64FS_AUDIV(x) (((x) & DAI64FS_AUDIV_MASK) << 8) + +#define SYSCON3_ADCCON (1 << 0) +#define SYSCON3_CLKCTL0 (1 << 1) +#define SYSCON3_CLKCTL1 (1 << 2) +#define SYSCON3_DAISEL (1 << 3) +#define SYSCON3_ADCCKNSEN (1 << 4) +#define SYSCON3_VERSN(x) (((x) >> 5) & 7) +#define SYSCON3_VERSN_MASK (7 << 5) +#define SYSCON3_FASTWAKE (1 << 8) +#define SYSCON3_DAIEN (1 << 9) +#define SYSCON3_128FS SYSCON3_DAIEN +#define SYSCON3_ENPD67 (1 << 10) + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#define MEMCFG_BUS_WIDTH_32 (1) +#define MEMCFG_BUS_WIDTH_16 (0) +#define MEMCFG_BUS_WIDTH_8 (3) + +#define MEMCFG_SQAEN (1 << 6) +#define MEMCFG_CLKENB (1 << 7) + +#define MEMCFG_WAITSTATE_8_3 (0 << 2) +#define MEMCFG_WAITSTATE_7_3 (1 << 2) +#define MEMCFG_WAITSTATE_6_3 (2 << 2) +#define MEMCFG_WAITSTATE_5_3 (3 << 2) +#define MEMCFG_WAITSTATE_4_2 (4 << 2) +#define MEMCFG_WAITSTATE_3_2 (5 << 2) +#define MEMCFG_WAITSTATE_2_2 (6 << 2) +#define MEMCFG_WAITSTATE_1_2 (7 << 2) +#define MEMCFG_WAITSTATE_8_1 (8 << 2) +#define MEMCFG_WAITSTATE_7_1 (9 << 2) +#define MEMCFG_WAITSTATE_6_1 (10 << 2) +#define MEMCFG_WAITSTATE_5_1 (11 << 2) +#define MEMCFG_WAITSTATE_4_0 (12 << 2) +#define MEMCFG_WAITSTATE_3_0 (13 << 2) +#define MEMCFG_WAITSTATE_2_0 (14 << 2) +#define MEMCFG_WAITSTATE_1_0 (15 << 2) + +#endif diff --git a/arch/arm/mach-clps711x/include/mach/devices.h b/arch/arm/mach-clps711x/include/mach/devices.h new file mode 100644 index 0000000..76680d8 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/devices.h @@ -0,0 +1,7 @@ +#ifndef __MACH_DEVICES_H +#define __MACH_DEVICES_H + +void setup_memcfg(int bank, u32 val); +void register_uart(unsigned int id); + +#endif diff --git a/arch/arm/mach-clps711x/lowlevel_init.c b/arch/arm/mach-clps711x/lowlevel_init.c new file mode 100644 index 0000000..ad70769 --- /dev/null +++ b/arch/arm/mach-clps711x/lowlevel_init.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <init.h> + +#include <asm/io.h> +#include <asm/barebox-arm.h> + +#include <mach/clps711x.h> + +#define MAIN_CLOCK 3686400 +#define CPU_SPEED 92160000 +#define BUS_SPEED (CPU_SPEED / 2) + +#define PLL_VALUE (((CPU_SPEED * 2) / MAIN_CLOCK) << 24) +#define SDRAM_REFRESH_RATE (64 * (BUS_SPEED / (8192 * 1000))) + +void __noreturn reset_cpu(unsigned long addr) +{ + for (;;) + ; + + unreachable(); +} + +void __naked __bare_init board_init_lowlevel(void) +{ + u32 tmp; + + /* Setup base clock */ + writel(SYSCON3_CLKCTL0 | SYSCON3_CLKCTL1, SYSCON3); + asm("nop"); + + /* Setup PLL */ + writel(PLL_VALUE, PLLW); + asm("nop"); + + /* CLKEN select, SDRAM width=32 */ + writel(SYSCON2_CLKENSL, SYSCON2); + + /* Enable SDQM pins */ + tmp = readl(SYSCON3); + tmp &= ~SYSCON3_ENPD67; + writel(tmp, SYSCON3); + + /* Setup Refresh Rate (64ms 8K Blocks) */ + writel(SDRAM_REFRESH_RATE, SDRFPR); + + /* Setup SDRAM (32MB, 16Bit*2, CAS=3) */ + writel(SDCONF_CASLAT_3 | SDCONF_SIZE_256 | SDCONF_WIDTH_16 | + SDCONF_CLKCTL | SDCONF_ACTIVE, SDCONF); + + board_init_lowlevel_return(); +} diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7eb96ed..02bc8bf 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -43,6 +43,11 @@ config DRIVER_SERIAL_BLACKFIN default y bool "Blackfin serial driver" +config DRIVER_SERIAL_CLPS711X + depends on ARCH_CLPS711X + default y + bool "CLPS711X serial driver" + config DRIVER_SERIAL_ALTERA depends on NIOS2 default y diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index e2d56b9..e6f1e22 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_DRIVER_SERIAL_NETX) += serial_netx.o obj-$(CONFIG_DRIVER_SERIAL_LINUX_CONSOLE) += linux_console.o obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX) += serial_mpc5xxx.o obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN) += serial_blackfin.o +obj-$(CONFIG_DRIVER_SERIAL_CLPS711X) += serial_clps711x.o obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o obj-$(CONFIG_DRIVER_SERIAL_S3C) += serial_s3c.o diff --git a/drivers/serial/serial_clps711x.c b/drivers/serial/serial_clps711x.c new file mode 100644 index 0000000..babb189 --- /dev/null +++ b/drivers/serial/serial_clps711x.c @@ -0,0 +1,119 @@ +/* + * Simple CLPS711X serial driver + * + * (C) Copyright 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <init.h> +#include <io.h> +#include <linux/clk.h> + +#include <mach/clps711x.h> + +static int clps711x_setbaudrate(struct console_device *cdev, int baudrate) +{ + int divisor; + u32 tmp, ubrlcr = cdev->dev->id ? UBRLCR2 : UBRLCR1; + + divisor = (clk_get_rate(cdev->dev->priv) / 16) / baudrate; + + tmp = readl(ubrlcr) & ~UBRLCR_BAUD_MASK; + tmp |= divisor - 1; + writel(tmp, ubrlcr); + + return 0; +} + +static int clps711x_init_port(struct console_device *cdev) +{ + u32 syscon = cdev->dev->id ? SYSCON2 : SYSCON1; + u32 ubrlcr = cdev->dev->id ? UBRLCR2 : UBRLCR1; + u32 tmp; + + /* Disable the UART */ + writel(readl(syscon) & ~SYSCON_UARTEN, syscon); + + /* Setup Line Control Register */ + tmp = readl(ubrlcr) & UBRLCR_BAUD_MASK; + tmp |= UBRLCR_FIFOEN | UBRLCR_WRDLEN8; /* FIFO on, 8N1 mode */ + writel(tmp, ubrlcr); + + /* Enable the UART */ + writel(readl(syscon) | SYSCON_UARTEN, syscon); + + return 0; +} + +static void clps711x_putc(struct console_device *cdev, char c) +{ + u32 sysflg = cdev->dev->id ? SYSFLG2 : SYSFLG1; + u32 uartdr = cdev->dev->id ? UARTDR2 : UARTDR1; + + /* Wait until there is space in the FIFO */ + while (readl(sysflg) & SYSFLG_UTXFF) + ; + + /* Send the character */ + writew(c, uartdr); +} + +static int clps711x_getc(struct console_device *cdev) +{ + u32 sysflg = cdev->dev->id ? SYSFLG2 : SYSFLG1; + u32 uartdr = cdev->dev->id ? UARTDR2 : UARTDR1; + u16 data; + + /* Wait until there is data in the FIFO */ + while (readl(sysflg) & SYSFLG_URXFE) + ; + + data = readw(uartdr); + + /* Check for an error flag */ + if (data & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)) + return -1; + + return (int)data; +} + +static int clps711x_tstc(struct console_device *cdev) +{ + u32 sysflg = cdev->dev->id ? SYSFLG2 : SYSFLG1; + + return !(readl(sysflg) & SYSFLG_URXFE); +} + +static int clps711x_probe(struct device_d *dev) +{ + struct console_device *cdev = xzalloc(sizeof(struct console_device)); + + dev->priv = clk_get(NULL, "uart"); + + cdev->dev = dev; + cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR; + cdev->tstc = clps711x_tstc; + cdev->putc = clps711x_putc; + cdev->getc = clps711x_getc; + cdev->setbrg = clps711x_setbaudrate; + clps711x_setbaudrate(cdev, CONFIG_BAUDRATE); + clps711x_init_port(cdev); + + return console_register(cdev); +} + +static struct driver_d clps711x_driver = { + .name = "clps711x_serial", + .probe = clps711x_probe, +}; + +static int clps711x_init(void) +{ + return register_driver(&clps711x_driver); +} +console_initcall(clps711x_init); -- 1.7.3.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-04 12:37 ` [PATCH 3/3] ARM: Add CLPS711X architecture Alexander Shiyan @ 2012-10-04 12:52 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 15:14 ` Alexander Shiyan 2012-10-05 12:12 ` Sascha Hauer 1 sibling, 1 reply; 16+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 12:52 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On 16:37 Thu 04 Oct , Alexander Shiyan wrote: > This patch adds new architecture (CLPS711X) into barebox. > The core-logic functionality of the device is built around an ARM720T > processor running at clock speeds up to 90 MHz and 74 MHz. > Patch also adds a generic board support (CLEP7212, Linux ARM ID=91) and > serial driver for this CPU. split board, arch and driver in different patch > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- > arch/arm/Kconfig | 6 + > arch/arm/Makefile | 2 + > arch/arm/boards/clep7212/Makefile | 1 + > arch/arm/boards/clep7212/clep7212.c | 62 +++++ > arch/arm/boards/clep7212/config.h | 4 + > arch/arm/boards/clep7212/env/bin/boot | 9 + > arch/arm/boards/clep7212/env/bin/flash_partition | 21 ++ > arch/arm/boards/clep7212/env/bin/init | 22 ++ > arch/arm/boards/clep7212/env/bin/update_kernel | 8 + > arch/arm/boards/clep7212/env/bin/update_rootfs | 8 + > arch/arm/boards/clep7212/env/config | 4 + > arch/arm/configs/clep7212_defconfig | 43 ++++ > arch/arm/cpu/Kconfig | 15 ++ > arch/arm/mach-clps711x/Kconfig | 26 ++ > arch/arm/mach-clps711x/Makefile | 1 + > arch/arm/mach-clps711x/clock.c | 111 +++++++++ > arch/arm/mach-clps711x/devices.c | 58 +++++ > arch/arm/mach-clps711x/include/mach/clkdev.h | 7 + > arch/arm/mach-clps711x/include/mach/clps711x.h | 283 ++++++++++++++++++++++ > arch/arm/mach-clps711x/include/mach/devices.h | 7 + > arch/arm/mach-clps711x/lowlevel_init.c | 61 +++++ > drivers/serial/Kconfig | 5 + > drivers/serial/Makefile | 1 + > drivers/serial/serial_clps711x.c | 119 +++++++++ > 24 files changed, 884 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/boards/clep7212/Makefile > create mode 100644 arch/arm/boards/clep7212/clep7212.c > create mode 100644 arch/arm/boards/clep7212/config.h > create mode 100644 arch/arm/boards/clep7212/env/bin/boot > create mode 100644 arch/arm/boards/clep7212/env/bin/flash_partition > create mode 100644 arch/arm/boards/clep7212/env/bin/init > create mode 100644 arch/arm/boards/clep7212/env/bin/update_kernel > create mode 100644 arch/arm/boards/clep7212/env/bin/update_rootfs > create mode 100644 arch/arm/boards/clep7212/env/config > create mode 100644 arch/arm/configs/clep7212_defconfig > create mode 100644 arch/arm/mach-clps711x/Kconfig > create mode 100644 arch/arm/mach-clps711x/Makefile > create mode 100644 arch/arm/mach-clps711x/clock.c > create mode 100644 arch/arm/mach-clps711x/devices.c > create mode 100644 arch/arm/mach-clps711x/include/mach/clkdev.h > create mode 100644 arch/arm/mach-clps711x/include/mach/clps711x.h > create mode 100644 arch/arm/mach-clps711x/include/mach/devices.h > create mode 100644 arch/arm/mach-clps711x/lowlevel_init.c > create mode 100644 drivers/serial/serial_clps711x.c > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index a54ad03..0bd902a 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -31,6 +31,11 @@ config ARCH_AT91 > select HAS_DEBUG_LL > select HAVE_MACH_ARM_HEAD > > +config ARCH_CLPS711X > + bool "Cirrus Logic EP711x/EP721x/EP731x" > + select CLKDEV_LOOKUP > + select CPU_ARM720T > + > config ARCH_EP93XX > bool "Cirrus Logic EP93xx" > select CPU_ARM920T > @@ -96,6 +101,7 @@ endchoice > > source arch/arm/cpu/Kconfig > source arch/arm/mach-at91/Kconfig > +source arch/arm/mach-clps711x/Kconfig > source arch/arm/mach-ep93xx/Kconfig > source arch/arm/mach-imx/Kconfig > source arch/arm/mach-mxs/Kconfig > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index 8e660be..d9ddbfb 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -52,6 +52,7 @@ AFLAGS += -include asm/unified.h -msoft-float $(AFLAGS_THUMB2) > # Machine directory name. This list is sorted alphanumerically > # by CONFIG_* macro name. > machine-$(CONFIG_ARCH_AT91) := at91 > +machine-$(CONFIG_ARCH_CLPS711X) := clps711x > machine-$(CONFIG_ARCH_EP93XX) := ep93xx > machine-$(CONFIG_ARCH_IMX) := imx > machine-$(CONFIG_ARCH_MXS) := mxs > @@ -75,6 +76,7 @@ board-$(CONFIG_MACH_AT91SAM9G10EK) := at91sam9261ek > board-$(CONFIG_MACH_AT91SAM9G20EK) := at91sam9260ek > board-$(CONFIG_MACH_AT91SAM9X5EK) := at91sam9x5ek > board-$(CONFIG_MACH_AT91SAM9M10G45EK) := at91sam9m10g45ek > +board-$(CONFIG_MACH_CLEP7212) := clep7212 > board-$(CONFIG_MACH_DSS11) := dss11 > board-$(CONFIG_MACH_EDB9301) := edb93xx > board-$(CONFIG_MACH_EDB9302) := edb93xx > diff --git a/arch/arm/boards/clep7212/Makefile b/arch/arm/boards/clep7212/Makefile > new file mode 100644 > index 0000000..676e867 > --- /dev/null > +++ b/arch/arm/boards/clep7212/Makefile > @@ -0,0 +1 @@ > +obj-y += clep7212.o > diff --git a/arch/arm/boards/clep7212/clep7212.c b/arch/arm/boards/clep7212/clep7212.c > new file mode 100644 > index 0000000..1211ebe > --- /dev/null > +++ b/arch/arm/boards/clep7212/clep7212.c > @@ -0,0 +1,62 @@ > +/* > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <driver.h> > +#include <init.h> > +#include <partition.h> > +#include <io.h> > +#include <sizes.h> > +#include <asm/armlinux.h> > +#include <generated/mach-types.h> > + > +#include <mach/clps711x.h> > +#include <mach/devices.h> > + > +static int clps711x_mem_init(void) > +{ > + ulong memsize = get_ram_size((ulong *)SDRAM_BASE, SZ_32M); > + > + arm_add_mem_device("ram0", SDRAM_BASE, memsize); > + > + return 0; > +} > +mem_initcall(clps711x_mem_init); > + > +static int clps711x_devices_init(void) > +{ > + /* Setup Chipselects */ > + setup_memcfg(0, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_16); > + setup_memcfg(1, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_8); > + setup_memcfg(2, MEMCFG_WAITSTATE_8_3 | MEMCFG_BUS_WIDTH_16 | > + MEMCFG_CLKENB); > + setup_memcfg(3, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_16); prefice function with arch > + > + add_cfi_flash_device(DEVICE_ID_DYNAMIC, CS0_BASE, SZ_32M, 0); > + > + devfs_add_partition("nor0", 0x00000, SZ_256K, DEVFS_PARTITION_FIXED, > + "self0"); > + devfs_add_partition("nor0", SZ_256K, SZ_256K, DEVFS_PARTITION_FIXED, > + "env0"); > + > + armlinux_set_bootparams((void *)SDRAM_BASE + 0x100); > + armlinux_set_architecture(MACH_TYPE_CLEP7212); > + armlinux_set_serial(readl(UNIQID)); > + > + return 0; > +} > +device_initcall(clps711x_devices_init); > + > +static int clps711x_console_init(void) > +{ > + register_uart(0); ditto > + > + return 0; > +} > +console_initcall(clps711x_console_init); > diff --git a/arch/arm/boards/clep7212/config.h b/arch/arm/boards/clep7212/config.h > new file mode 100644 > index 0000000..6ae9a40 > --- /dev/null > +++ b/arch/arm/boards/clep7212/config.h > @@ -0,0 +1,4 @@ > +#ifndef __CONFIG_H > +#define __CONFIG_H > + > +#endif /* __CONFIG_H */ > diff --git a/arch/arm/boards/clep7212/env/bin/boot b/arch/arm/boards/clep7212/env/bin/boot > new file mode 100644 > index 0000000..c3f12ce > --- /dev/null > +++ b/arch/arm/boards/clep7212/env/bin/boot > @@ -0,0 +1,9 @@ > +#!/bin/sh > + > +. /env/config > + > +bootargs_mtd="mtdparts=physmap-flash.0:${nor_parts};mtd-ram.0:-(ramdisk)" > + > +bootargs="${bootargs_common} ${bootargs_mtd} root=/dev/mtdblock4" > + > +bootm /dev/nor0.kernel please swtich to defaultenv-2 > diff --git a/arch/arm/boards/clep7212/env/bin/flash_partition b/arch/arm/boards/clep7212/env/bin/flash_partition > new file mode 100644 > index 0000000..65aece8 ... > diff --git a/arch/arm/boards/clep7212/env/config b/arch/arm/boards/clep7212/env/config > new file mode 100644 > index 0000000..6f15ee4 > --- /dev/null > +++ b/arch/arm/boards/clep7212/env/config > @@ -0,0 +1,4 @@ > +board=clep7212 > +autoboot_timeout=3 > +bootargs_common="earlyprintk console=ttyCL0,57600n8" > +nor_parts="256k(barebox)ro,256k(env),3584k(kernel),-(root)" > diff --git a/arch/arm/configs/clep7212_defconfig b/arch/arm/configs/clep7212_defconfig > new file mode 100644 > index 0000000..c973629 > --- /dev/null > +++ b/arch/arm/configs/clep7212_defconfig > @@ -0,0 +1,43 @@ > +CONFIG_ARCH_CLPS711X=y > +CONFIG_AEABI=y > +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y > +CONFIG_BAUDRATE=57600 why?? usally 115200 > +CONFIG_GLOB=y > +CONFIG_GLOB_SORT=y > +CONFIG_CMDLINE_EDITING=y > +CONFIG_AUTO_COMPLETE=y > +CONFIG_DEFAULT_ENVIRONMENT_COMPRESSED_LZO=y > +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y > +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/clep7212/env" > +CONFIG_ENABLE_FLASH_NOISE=y > +CONFIG_ENABLE_PARTITION_NOISE=y > +CONFIG_ENABLE_DEVICE_NOISE=y > +CONFIG_CMD_SAVEENV=y > +CONFIG_CMD_EXPORT=y > +CONFIG_CMD_PRINTENV=y > +CONFIG_CMD_GLOBAL=y > +CONFIG_CMD_AUTOMOUNT=y > +CONFIG_CMD_BASENAME=y > +CONFIG_CMD_MEMINFO=y > +CONFIG_CMD_FLASH=y > +CONFIG_CMD_BOOTM_SHOW_TYPE=y > +CONFIG_CMD_BOOTM_INITRD=y > +CONFIG_CMD_BOOTZ=y > +# CONFIG_CMD_BOOTU is not set > +CONFIG_FLEXIBLE_BOOTARGS=y > +CONFIG_CMD_TIMEOUT=y > +CONFIG_CMD_PARTITION=y > +CONFIG_CMD_MAGICVAR=y > +CONFIG_CMD_MAGICVAR_HELP=y > +# CONFIG_SPI is not set > +CONFIG_DRIVER_CFI=y > +# CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set > +# CONFIG_DRIVER_CFI_BANK_WIDTH_4 is not set > +CONFIG_MTD=y > +CONFIG_DISK=y > +CONFIG_DISK_WRITE=y > +CONFIG_DISK_INTF_PLATFORM_IDE=y > +CONFIG_FS_CRAMFS=y > +CONFIG_FS_FAT=y > +CONFIG_FS_FAT_LFN=y > +CONFIG_LZO_DECOMPRESS=y > diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig > index 2ed6789..e732775 100644 > --- a/arch/arm/cpu/Kconfig > +++ b/arch/arm/cpu/Kconfig > @@ -8,6 +8,21 @@ config CPU_32 > # which CPUs we support in the kernel image, and the compiler instruction > # optimiser behaviour. > > +# ARM720T > +config CPU_ARM720T > + bool > + select CPU_32v4T > + help > + The EP7312 is designed for ultra-low-power applications such as > + portable handheld devices that require digital audio decompression > + capability, Internet appliances and low-power industrial controls. > + > + More information on the Cirrus Logic EP7312 at > + <http://www.cirrus.com/en/products/ep7312.html>. > + > + Say Y if you want support for the ARM720T processor. > + Otherwise, say N. > + > # ARM920T > config CPU_ARM920T > bool > diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig > new file mode 100644 > index 0000000..45ac017 > --- /dev/null > +++ b/arch/arm/mach-clps711x/Kconfig > @@ -0,0 +1,26 @@ > +if ARCH_CLPS711X > + > +choice > + prompt "Cirrus Logic EP711x/EP721x/EP731x Board Type" > + > +config MACH_CLEP7212 > + bool "Cirrus Logic CLEP7212" > + select MACH_HAS_LOWLEVEL_INIT > + select MACH_DO_LOWLEVEL_INIT > + help > + Boards based on the Cirrus Logic 7212/7312 chips > + > +endchoice > + > +config BOARDINFO > + default "Cirrus Logic CLEP7212" > + > +config ARCH_TEXT_BASE > + hex > + default 0xc0780000 > + > +config BAREBOX_MAX_IMAGE_SIZE > + hex > + default 0x00080000 > + > +endif > diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile > new file mode 100644 > index 0000000..cb18e34 > --- /dev/null > +++ b/arch/arm/mach-clps711x/Makefile > @@ -0,0 +1 @@ > +obj-y += clock.o devices.o lowlevel_init.o > diff --git a/arch/arm/mach-clps711x/clock.c b/arch/arm/mach-clps711x/clock.c > new file mode 100644 > index 0000000..acc8623 > --- /dev/null > +++ b/arch/arm/mach-clps711x/clock.c > @@ -0,0 +1,111 @@ > +/* > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > +#include <clock.h> > +#include <asm/io.h> > +#include <linux/clkdev.h> > + > +#include <mach/clps711x.h> > + > +struct clk { > + unsigned long rate; > +}; > + > +static struct clk uart_clk, bus_clk; > + > +uint64_t clocksource_read(void) > +{ > + return 0xffff - readw(TC2D); replace with return ~readw(TC2D); > +} > + > +static struct clocksource cs = { > + .read = clocksource_read, > + .mask = CLOCKSOURCE_MASK(16), > +}; > + > +unsigned long clk_get_rate(struct clk *clk) > +{ > + return clk->rate; > +} > +EXPORT_SYMBOL(clk_get_rate); > + > +/* Enable and Disable do nothing */ > +int clk_enable(struct clk *clk) > +{ > + return 0; > +} > +EXPORT_SYMBOL(clk_enable); > + > +void clk_disable(struct clk *clk) > +{ > +} > +EXPORT_SYMBOL(clk_disable); > + > +static int clocks_init(void) please split clocksource and clk > +{ > + int osc, ext, pll, cpu, timer; > + u32 tmp; > + > + osc = 3686400; > + ext = 13000000; > + > + tmp = readl(PLLR) >> 24; > + if (tmp) > + pll = (osc * tmp) / 2; > + else > + pll = 73728000; /* Default value for old CPUs */ > + > + tmp = readl(SYSFLG2); > + if (tmp & SYSFLG2_CKMODE) { > + cpu = ext; > + bus_clk.rate = cpu; > + } else { > + cpu = pll; > + if (cpu >= 36864000) > + bus_clk.rate = cpu / 2; > + else > + bus_clk.rate = 36864000 / 2; > + } > + > + uart_clk.rate = bus_clk.rate / 10; > + > + if (tmp & SYSFLG2_CKMODE) { > + tmp = readw(SYSCON2); > + if (tmp & SYSCON2_OSTB) > + timer = ext / 26; > + else > + timer = 541440; > + } else > + timer = cpu / 144; > + > + tmp = readl(SYSCON1); > + tmp &= ~SYSCON1_TC2M; /* Free running mode */ > + tmp |= SYSCON1_TC2S; /* High frequency source */ > + writel(tmp, SYSCON1); > + > + clocks_calc_mult_shift(&cs.mult, &cs.shift, timer, NSEC_PER_SEC, 10); > + > + return init_clock(&cs); > +} > +core_initcall(clocks_init); > + > +static struct clk_lookup clocks_lookups[] = { > + CLKDEV_CON_ID("bus", &bus_clk), > + CLKDEV_CON_ID("uart", &uart_clk), > +}; > + > +static int clkdev_init(void) > +{ > + clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups)); > + > + return 0; > +} > +postcore_initcall(clkdev_init); > diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c > new file mode 100644 > index 0000000..2aecc2b > --- /dev/null > +++ b/arch/arm/mach-clps711x/devices.c > @@ -0,0 +1,58 @@ > +/* > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > + > +#include <asm/io.h> > + > +#include <mach/clps711x.h> > + > +void _setup_memcfg(int bank, u32 addr, u32 val) > +{ > + u32 tmp = readl(addr); > + > + switch (bank) { > + case 0: > + tmp &= ~(0xff << 0); > + tmp |= val << 0; > + break; > + case 1: > + tmp &= ~(0xff << 8); > + tmp |= val << 8; > + break; > + case 2: > + tmp &= ~(0xff << 16); > + tmp |= val << 16; > + break; > + case 3: > + tmp &= ~(0xff << 24); > + tmp |= val << 24; > + break; no default? > + } > + > + writel(tmp, addr); > +} > + > +void setup_memcfg(int bank, u32 val) prefix with arch name > +{ > + switch (bank) { > + case 0 ... 3: > + _setup_memcfg(bank, MEMCFG1, val); > + break; > + case 4 ... 7: > + _setup_memcfg(bank - 4, MEMCFG2, val); > + break; > + } > +} > + > +void register_uart(unsigned int id) > +{ > + add_generic_device_res("clps711x_serial", id, NULL, 0, NULL); will no work you must pass resource > +} > diff --git a/arch/arm/mach-clps711x/include/mach/clkdev.h b/arch/arm/mach-clps711x/include/mach/clkdev.h > new file mode 100644 > index 0000000..9278209 > --- /dev/null > +++ b/arch/arm/mach-clps711x/include/mach/clkdev.h > @@ -0,0 +1,7 @@ > +#ifndef __MACH_CLKDEV_H > +#define __MACH_CLKDEV_H > + > +#define __clk_get(clk) ({ 1; }) > +#define __clk_put(clk) do { } while (0) > + > +#endif > diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h > new file mode 100644 > index 0000000..ac6edfb > --- /dev/null > +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h > @@ -0,0 +1,283 @@ > +/* > + * Hardware definitions for Cirrus Logic CLPS711X > + * > + * Copyright (C) 2000 Deep Blue Solutions Ltd. > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#ifndef __MACH_CLPS711X_H > +#define __MACH_CLPS711X_H > + > +#define CS0_BASE (0x00000000) > +#define CS1_BASE (0x10000000) > +#define CS2_BASE (0x20000000) > +#define CS3_BASE (0x30000000) > +#define CS4_BASE (0x40000000) > +#define CS5_BASE (0x50000000) > +#define CS6_BASE (0x60000000) > +#define CS7_BASE (0x70000000) > +#define REGS_BASE (0x80000000) > +#define SDRAM_BASE (0xc0000000) > + > +#define PADR (REGS_BASE + 0x0000) > +#define PBDR (REGS_BASE + 0x0001) > +#define PCDR (REGS_BASE + 0x0002) > +#define PDDR (REGS_BASE + 0x0003) > +#define PADDR (REGS_BASE + 0x0040) > +#define PBDDR (REGS_BASE + 0x0041) > +#define PCDDR (REGS_BASE + 0x0042) > +#define PDDDR (REGS_BASE + 0x0043) > +#define PEDR (REGS_BASE + 0x0083) > +#define PEDDR (REGS_BASE + 0x00c3) > +#define SYSCON1 (REGS_BASE + 0x0100) > +#define SYSFLG1 (REGS_BASE + 0x0140) > +#define MEMCFG1 (REGS_BASE + 0x0180) > +#define MEMCFG2 (REGS_BASE + 0x01c0) > +#define DRFPR (REGS_BASE + 0x0200) > +#define INTSR1 (REGS_BASE + 0x0240) > +#define INTMR1 (REGS_BASE + 0x0280) > +#define LCDCON (REGS_BASE + 0x02c0) > +#define TC1D (REGS_BASE + 0x0300) > +#define TC2D (REGS_BASE + 0x0340) > +#define RTCDR (REGS_BASE + 0x0380) > +#define RTCMR (REGS_BASE + 0x03c0) > +#define PMPCON (REGS_BASE + 0x0400) > +#define CODR (REGS_BASE + 0x0440) > +#define UARTDR1 (REGS_BASE + 0x0480) > +#define UBRLCR1 (REGS_BASE + 0x04c0) > +#define SYNCIO (REGS_BASE + 0x0500) > +#define PALLSW (REGS_BASE + 0x0540) > +#define PALMSW (REGS_BASE + 0x0580) > +#define STFCLR (REGS_BASE + 0x05c0) > +#define BLEOI (REGS_BASE + 0x0600) > +#define MCEOI (REGS_BASE + 0x0640) > +#define TEOI (REGS_BASE + 0x0680) > +#define TC1EOI (REGS_BASE + 0x06c0) > +#define TC2EOI (REGS_BASE + 0x0700) > +#define RTCEOI (REGS_BASE + 0x0740) > +#define UMSEOI (REGS_BASE + 0x0780) > +#define COEOI (REGS_BASE + 0x07c0) > +#define HALT (REGS_BASE + 0x0800) > +#define STDBY (REGS_BASE + 0x0840) > + > +#define FBADDR (REGS_BASE + 0x1000) > +#define SYSCON2 (REGS_BASE + 0x1100) > +#define SYSFLG2 (REGS_BASE + 0x1140) > +#define INTSR2 (REGS_BASE + 0x1240) > +#define INTMR2 (REGS_BASE + 0x1280) > +#define UARTDR2 (REGS_BASE + 0x1480) > +#define UBRLCR2 (REGS_BASE + 0x14c0) > +#define SS2DR (REGS_BASE + 0x1500) > +#define SRXEOF (REGS_BASE + 0x1600) > +#define SS2POP (REGS_BASE + 0x16c0) > +#define KBDEOI (REGS_BASE + 0x1700) > + > +#define DAIR (REGS_BASE + 0x2000) > +#define DAIDR0 (REGS_BASE + 0x2040) > +#define DAIDR1 (REGS_BASE + 0x2080) > +#define DAIDR2 (REGS_BASE + 0x20c0) > +#define DAISR (REGS_BASE + 0x2100) > +#define SYSCON3 (REGS_BASE + 0x2200) > +#define INTSR3 (REGS_BASE + 0x2240) > +#define INTMR3 (REGS_BASE + 0x2280) > +#define LEDFLSH (REGS_BASE + 0x22c0) > +#define SDCONF (REGS_BASE + 0x2300) > +#define SDRFPR (REGS_BASE + 0x2340) > +#define UNIQID (REGS_BASE + 0x2440) > +#define DAI64FS (REGS_BASE + 0x2600) > +#define PLLW (REGS_BASE + 0x2610) > +#define PLLR (REGS_BASE + 0xa5a8) > +#define RANDID0 (REGS_BASE + 0x2700) > +#define RANDID1 (REGS_BASE + 0x2704) > +#define RANDID2 (REGS_BASE + 0x2708) > +#define RANDID3 (REGS_BASE + 0x270c) > + > +/* common bits: SYSCON1 / SYSCON2 */ > +#define SYSCON_UARTEN (1 << 8) > + > +#define SYSCON1_KBDSCAN(x) ((x) & 15) > +#define SYSCON1_KBDSCANMASK (15) > +#define SYSCON1_TC1M (1 << 4) > +#define SYSCON1_TC1S (1 << 5) > +#define SYSCON1_TC2M (1 << 6) > +#define SYSCON1_TC2S (1 << 7) > +#define SYSCON1_UART1EN SYSCON_UARTEN > +#define SYSCON1_BZTOG (1 << 9) > +#define SYSCON1_BZMOD (1 << 10) > +#define SYSCON1_DBGEN (1 << 11) > +#define SYSCON1_LCDEN (1 << 12) > +#define SYSCON1_CDENTX (1 << 13) > +#define SYSCON1_CDENRX (1 << 14) > +#define SYSCON1_SIREN (1 << 15) > +#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) > +#define SYSCON1_ADCKSEL_MASK (3 << 16) > +#define SYSCON1_EXCKEN (1 << 18) > +#define SYSCON1_WAKEDIS (1 << 19) > +#define SYSCON1_IRTXM (1 << 20) > + > +/* common bits: SYSFLG1 / SYSFLG2 */ > +#define SYSFLG_UBUSY (1 << 11) > +#define SYSFLG_URXFE (1 << 22) > +#define SYSFLG_UTXFF (1 << 23) > + > +#define SYSFLG1_MCDR (1 << 0) > +#define SYSFLG1_DCDET (1 << 1) > +#define SYSFLG1_WUDR (1 << 2) > +#define SYSFLG1_WUON (1 << 3) > +#define SYSFLG1_CTS (1 << 8) > +#define SYSFLG1_DSR (1 << 9) > +#define SYSFLG1_DCD (1 << 10) > +#define SYSFLG1_UBUSY SYSFLG_UBUSY > +#define SYSFLG1_NBFLG (1 << 12) > +#define SYSFLG1_RSTFLG (1 << 13) > +#define SYSFLG1_PFFLG (1 << 14) > +#define SYSFLG1_CLDFLG (1 << 15) > +#define SYSFLG1_URXFE SYSFLG_URXFE > +#define SYSFLG1_UTXFF SYSFLG_UTXFF > +#define SYSFLG1_CRXFE (1 << 24) > +#define SYSFLG1_CTXFF (1 << 25) > +#define SYSFLG1_SSIBUSY (1 << 26) > +#define SYSFLG1_ID (1 << 29) > +#define SYSFLG1_VERID(x) (((x) >> 30) & 3) > +#define SYSFLG1_VERID_MASK (3 << 30) > + > +#define SYSFLG2_SSRXOF (1 << 0) > +#define SYSFLG2_RESVAL (1 << 1) > +#define SYSFLG2_RESFRM (1 << 2) > +#define SYSFLG2_SS2RXFE (1 << 3) > +#define SYSFLG2_SS2TXFF (1 << 4) > +#define SYSFLG2_SS2TXUF (1 << 5) > +#define SYSFLG2_CKMODE (1 << 6) > +#define SYSFLG2_UBUSY SYSFLG_UBUSY > +#define SYSFLG2_URXFE SYSFLG_URXFE > +#define SYSFLG2_UTXFF SYSFLG_UTXFF > + > +#define LCDCON_GSEN (1 << 30) > +#define LCDCON_GSMD (1 << 31) > + > +#define SYSCON2_SERSEL (1 << 0) > +#define SYSCON2_KBD6 (1 << 1) > +#define SYSCON2_DRAMZ (1 << 2) > +#define SYSCON2_KBWEN (1 << 3) > +#define SYSCON2_SS2TXEN (1 << 4) > +#define SYSCON2_PCCARD1 (1 << 5) > +#define SYSCON2_PCCARD2 (1 << 6) > +#define SYSCON2_SS2RXEN (1 << 7) > +#define SYSCON2_UART2EN SYSCON_UARTEN > +#define SYSCON2_SS2MAEN (1 << 9) > +#define SYSCON2_OSTB (1 << 12) > +#define SYSCON2_CLKENSL (1 << 13) > +#define SYSCON2_BUZFREQ (1 << 14) > + > +/* common bits: UARTDR1 / UARTDR2 */ > +#define UARTDR_FRMERR (1 << 8) > +#define UARTDR_PARERR (1 << 9) > +#define UARTDR_OVERR (1 << 10) > + > +/* common bits: UBRLCR1 / UBRLCR2 */ > +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) > +#define UBRLCR_BREAK (1 << 12) > +#define UBRLCR_PRTEN (1 << 13) > +#define UBRLCR_EVENPRT (1 << 14) > +#define UBRLCR_XSTOP (1 << 15) > +#define UBRLCR_FIFOEN (1 << 16) > +#define UBRLCR_WRDLEN5 (0 << 17) > +#define UBRLCR_WRDLEN6 (1 << 17) > +#define UBRLCR_WRDLEN7 (2 << 17) > +#define UBRLCR_WRDLEN8 (3 << 17) > +#define UBRLCR_WRDLEN_MASK (3 << 17) > + > +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) > +#define SYNCIO_SMCKEN (1 << 13) > +#define SYNCIO_TXFRMEN (1 << 14) > + > +#define DAIR_RESERVED (0x0404) > +#define DAIR_DAIEN (1 << 16) > +#define DAIR_ECS (1 << 17) > +#define DAIR_LCTM (1 << 19) > +#define DAIR_LCRM (1 << 20) > +#define DAIR_RCTM (1 << 21) > +#define DAIR_RCRM (1 << 22) > +#define DAIR_LBM (1 << 23) > + > +#define DAIDR2_FIFOEN (1 << 15) > +#define DAIDR2_FIFOLEFT (0x0d << 16) > +#define DAIDR2_FIFORIGHT (0x11 << 16) > + > +#define DAISR_RCTS (1 << 0) > +#define DAISR_RCRS (1 << 1) > +#define DAISR_LCTS (1 << 2) > +#define DAISR_LCRS (1 << 3) > +#define DAISR_RCTU (1 << 4) > +#define DAISR_RCRO (1 << 5) > +#define DAISR_LCTU (1 << 6) > +#define DAISR_LCRO (1 << 7) > +#define DAISR_RCNF (1 << 8) > +#define DAISR_RCNE (1 << 9) > +#define DAISR_LCNF (1 << 10) > +#define DAISR_LCNE (1 << 11) > +#define DAISR_FIFO (1 << 12) > + > +#define DAI64FS_I2SF64 (1 << 0) > +#define DAI64FS_AUDIOCLKEN (1 << 1) > +#define DAI64FS_AUDIOCLKSRC (1 << 2) > +#define DAI64FS_MCLK256EN (1 << 3) > +#define DAI64FS_LOOPBACK (1 << 5) > +#define DAI64FS_AUDIV_MASK (0x7f) > +#define DAI64FS_AUDIV(x) (((x) & DAI64FS_AUDIV_MASK) << 8) > + > +#define SYSCON3_ADCCON (1 << 0) > +#define SYSCON3_CLKCTL0 (1 << 1) > +#define SYSCON3_CLKCTL1 (1 << 2) > +#define SYSCON3_DAISEL (1 << 3) > +#define SYSCON3_ADCCKNSEN (1 << 4) > +#define SYSCON3_VERSN(x) (((x) >> 5) & 7) > +#define SYSCON3_VERSN_MASK (7 << 5) > +#define SYSCON3_FASTWAKE (1 << 8) > +#define SYSCON3_DAIEN (1 << 9) > +#define SYSCON3_128FS SYSCON3_DAIEN > +#define SYSCON3_ENPD67 (1 << 10) > + > +#define SDCONF_ACTIVE (1 << 10) > +#define SDCONF_CLKCTL (1 << 9) > +#define SDCONF_WIDTH_4 (0 << 7) > +#define SDCONF_WIDTH_8 (1 << 7) > +#define SDCONF_WIDTH_16 (2 << 7) > +#define SDCONF_WIDTH_32 (3 << 7) > +#define SDCONF_SIZE_16 (0 << 5) > +#define SDCONF_SIZE_64 (1 << 5) > +#define SDCONF_SIZE_128 (2 << 5) > +#define SDCONF_SIZE_256 (3 << 5) > +#define SDCONF_CASLAT_2 (2) > +#define SDCONF_CASLAT_3 (3) > + > +#define MEMCFG_BUS_WIDTH_32 (1) > +#define MEMCFG_BUS_WIDTH_16 (0) > +#define MEMCFG_BUS_WIDTH_8 (3) > + > +#define MEMCFG_SQAEN (1 << 6) > +#define MEMCFG_CLKENB (1 << 7) > + > +#define MEMCFG_WAITSTATE_8_3 (0 << 2) > +#define MEMCFG_WAITSTATE_7_3 (1 << 2) > +#define MEMCFG_WAITSTATE_6_3 (2 << 2) > +#define MEMCFG_WAITSTATE_5_3 (3 << 2) > +#define MEMCFG_WAITSTATE_4_2 (4 << 2) > +#define MEMCFG_WAITSTATE_3_2 (5 << 2) > +#define MEMCFG_WAITSTATE_2_2 (6 << 2) > +#define MEMCFG_WAITSTATE_1_2 (7 << 2) > +#define MEMCFG_WAITSTATE_8_1 (8 << 2) > +#define MEMCFG_WAITSTATE_7_1 (9 << 2) > +#define MEMCFG_WAITSTATE_6_1 (10 << 2) > +#define MEMCFG_WAITSTATE_5_1 (11 << 2) > +#define MEMCFG_WAITSTATE_4_0 (12 << 2) > +#define MEMCFG_WAITSTATE_3_0 (13 << 2) > +#define MEMCFG_WAITSTATE_2_0 (14 << 2) > +#define MEMCFG_WAITSTATE_1_0 (15 << 2) > + > +#endif > diff --git a/arch/arm/mach-clps711x/include/mach/devices.h b/arch/arm/mach-clps711x/include/mach/devices.h > new file mode 100644 > index 0000000..76680d8 > --- /dev/null > +++ b/arch/arm/mach-clps711x/include/mach/devices.h > @@ -0,0 +1,7 @@ > +#ifndef __MACH_DEVICES_H > +#define __MACH_DEVICES_H > + > +void setup_memcfg(int bank, u32 val); > +void register_uart(unsigned int id); > + > +#endif > diff --git a/arch/arm/mach-clps711x/lowlevel_init.c b/arch/arm/mach-clps711x/lowlevel_init.c > new file mode 100644 > index 0000000..ad70769 > --- /dev/null > +++ b/arch/arm/mach-clps711x/lowlevel_init.c > @@ -0,0 +1,61 @@ > +/* > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > + > +#include <asm/io.h> > +#include <asm/barebox-arm.h> > + > +#include <mach/clps711x.h> > + > +#define MAIN_CLOCK 3686400 > +#define CPU_SPEED 92160000 > +#define BUS_SPEED (CPU_SPEED / 2) > + > +#define PLL_VALUE (((CPU_SPEED * 2) / MAIN_CLOCK) << 24) > +#define SDRAM_REFRESH_RATE (64 * (BUS_SPEED / (8192 * 1000))) > + > +void __noreturn reset_cpu(unsigned long addr) > +{ > + for (;;) no cpu reset? > + ; > + > + unreachable(); > +} > + > +void __naked __bare_init board_init_lowlevel(void) > +{ > + u32 tmp; > + > + /* Setup base clock */ > + writel(SYSCON3_CLKCTL0 | SYSCON3_CLKCTL1, SYSCON3); > + asm("nop"); > + > + /* Setup PLL */ > + writel(PLL_VALUE, PLLW); > + asm("nop"); > + > + /* CLKEN select, SDRAM width=32 */ > + writel(SYSCON2_CLKENSL, SYSCON2); > + > + /* Enable SDQM pins */ > + tmp = readl(SYSCON3); > + tmp &= ~SYSCON3_ENPD67; > + writel(tmp, SYSCON3); > + > + /* Setup Refresh Rate (64ms 8K Blocks) */ > + writel(SDRAM_REFRESH_RATE, SDRFPR); > + > + /* Setup SDRAM (32MB, 16Bit*2, CAS=3) */ > + writel(SDCONF_CASLAT_3 | SDCONF_SIZE_256 | SDCONF_WIDTH_16 | > + SDCONF_CLKCTL | SDCONF_ACTIVE, SDCONF); > + > + board_init_lowlevel_return(); > +} > diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig > index 7eb96ed..02bc8bf 100644 > --- a/drivers/serial/Kconfig > +++ b/drivers/serial/Kconfig > @@ -43,6 +43,11 @@ config DRIVER_SERIAL_BLACKFIN > default y > bool "Blackfin serial driver" > > +config DRIVER_SERIAL_CLPS711X > + depends on ARCH_CLPS711X > + default y > + bool "CLPS711X serial driver" please spilt drivers in an other patch > + > config DRIVER_SERIAL_ALTERA > depends on NIOS2 > default y > diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile > index e2d56b9..e6f1e22 100644 > --- a/drivers/serial/Makefile > +++ b/drivers/serial/Makefile > @@ -13,6 +13,7 @@ obj-$(CONFIG_DRIVER_SERIAL_NETX) += serial_netx.o > obj-$(CONFIG_DRIVER_SERIAL_LINUX_CONSOLE) += linux_console.o > obj-$(CONFIG_DRIVER_SERIAL_MPC5XXX) += serial_mpc5xxx.o > obj-$(CONFIG_DRIVER_SERIAL_BLACKFIN) += serial_blackfin.o > +obj-$(CONFIG_DRIVER_SERIAL_CLPS711X) += serial_clps711x.o > obj-$(CONFIG_DRIVER_SERIAL_NS16550) += serial_ns16550.o > obj-$(CONFIG_DRIVER_SERIAL_PL010) += serial_pl010.o > obj-$(CONFIG_DRIVER_SERIAL_S3C) += serial_s3c.o > diff --git a/drivers/serial/serial_clps711x.c b/drivers/serial/serial_clps711x.c > new file mode 100644 > index 0000000..babb189 > --- /dev/null > +++ b/drivers/serial/serial_clps711x.c > @@ -0,0 +1,119 @@ > +/* > + * Simple CLPS711X serial driver > + * > + * (C) Copyright 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > +#include <io.h> > +#include <linux/clk.h> > + > +#include <mach/clps711x.h> > + > +static int clps711x_setbaudrate(struct console_device *cdev, int baudrate) > +{ > + int divisor; > + u32 tmp, ubrlcr = cdev->dev->id ? UBRLCR2 : UBRLCR1; > + this is supposed to be pass via resources > + divisor = (clk_get_rate(cdev->dev->priv) / 16) / baudrate; > + > + tmp = readl(ubrlcr) & ~UBRLCR_BAUD_MASK; > + tmp |= divisor - 1; > + writel(tmp, ubrlcr); > + > + return 0; > +} > + > +static int clps711x_init_port(struct console_device *cdev) > +{ > + u32 syscon = cdev->dev->id ? SYSCON2 : SYSCON1; > + u32 ubrlcr = cdev->dev->id ? UBRLCR2 : UBRLCR1; > + u32 tmp; > + > + /* Disable the UART */ > + writel(readl(syscon) & ~SYSCON_UARTEN, syscon); > + > + /* Setup Line Control Register */ > + tmp = readl(ubrlcr) & UBRLCR_BAUD_MASK; > + tmp |= UBRLCR_FIFOEN | UBRLCR_WRDLEN8; /* FIFO on, 8N1 mode */ > + writel(tmp, ubrlcr); > + > + /* Enable the UART */ > + writel(readl(syscon) | SYSCON_UARTEN, syscon); > + > + return 0; > +} > + > +static void clps711x_putc(struct console_device *cdev, char c) > +{ > + u32 sysflg = cdev->dev->id ? SYSFLG2 : SYSFLG1; > + u32 uartdr = cdev->dev->id ? UARTDR2 : UARTDR1; > + > + /* Wait until there is space in the FIFO */ > + while (readl(sysflg) & SYSFLG_UTXFF) > + ; > + > + /* Send the character */ > + writew(c, uartdr); > +} > + > +static int clps711x_getc(struct console_device *cdev) > +{ > + u32 sysflg = cdev->dev->id ? SYSFLG2 : SYSFLG1; > + u32 uartdr = cdev->dev->id ? UARTDR2 : UARTDR1; > + u16 data; > + > + /* Wait until there is data in the FIFO */ > + while (readl(sysflg) & SYSFLG_URXFE) > + ; > + > + data = readw(uartdr); > + > + /* Check for an error flag */ > + if (data & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)) > + return -1; > + > + return (int)data; > +} > + > +static int clps711x_tstc(struct console_device *cdev) > +{ > + u32 sysflg = cdev->dev->id ? SYSFLG2 : SYSFLG1; > + > + return !(readl(sysflg) & SYSFLG_URXFE); > +} > + > +static int clps711x_probe(struct device_d *dev) > +{ > + struct console_device *cdev = xzalloc(sizeof(struct console_device)); > + > + dev->priv = clk_get(NULL, "uart"); no check? put a BUG_ON at least > + > + cdev->dev = dev; > + cdev->f_caps = CONSOLE_STDIN | CONSOLE_STDOUT | CONSOLE_STDERR; > + cdev->tstc = clps711x_tstc; > + cdev->putc = clps711x_putc; > + cdev->getc = clps711x_getc; > + cdev->setbrg = clps711x_setbaudrate; > + clps711x_setbaudrate(cdev, CONFIG_BAUDRATE); > + clps711x_init_port(cdev); > + > + return console_register(cdev); > +} > + > +static struct driver_d clps711x_driver = { > + .name = "clps711x_serial", > + .probe = clps711x_probe, > +}; > + > +static int clps711x_init(void) > +{ > + return register_driver(&clps711x_driver); will not work on next use platfrom_driver Best Regards, J. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-04 12:52 ` Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 15:14 ` Alexander Shiyan 2012-10-04 17:08 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 1 reply; 16+ messages in thread From: Alexander Shiyan @ 2012-10-04 15:14 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox On Thu, 4 Oct 2012 14:52:29 +0200 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote: > On 16:37 Thu 04 Oct , Alexander Shiyan wrote: > > This patch adds new architecture (CLPS711X) into barebox. > > The core-logic functionality of the device is built around an ARM720T > > processor running at clock speeds up to 90 MHz and 74 MHz. > > Patch also adds a generic board support (CLEP7212, Linux ARM ID=91) and > > serial driver for this CPU. ... > > +CONFIG_BAUDRATE=57600 > why?? usally 115200 It is impossible rate when CPU is clocked from an external source. Possible rates is very limited for this platform and historically (for this target) default baudrate is 57600. In any case it can be changed via config option. ... > > +static int clocks_init(void) > please split clocksource and clk I do not know how best to do it because I need access to calculated values of the frequency in initialization clkdev & clocksource. > > +void _setup_memcfg(int bank, u32 addr, u32 val) > > +{ > > + u32 tmp = readl(addr); > > + > > + switch (bank) { > > + case 0: > > + tmp &= ~(0xff << 0); > > + tmp |= val << 0; > > + break; > > + case 1: > > + tmp &= ~(0xff << 8); > > + tmp |= val << 8; > > + break; > > + case 2: > > + tmp &= ~(0xff << 16); > > + tmp |= val << 16; > > + break; > > + case 3: > > + tmp &= ~(0xff << 24); > > + tmp |= val << 24; > > + break; > no default? "Default" is not needed, because call is used internally in this unit and it protected by "switch/case" in the caller. > > +void __noreturn reset_cpu(unsigned long addr) > > +{ > > + for (;;) > no cpu reset? This CPU don't have reset register. -- Alexander Shiyan <shc_work@mail.ru> _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-04 15:14 ` Alexander Shiyan @ 2012-10-04 17:08 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 17:19 ` Alexander Shiyan 0 siblings, 1 reply; 16+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 17:08 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On 19:14 Thu 04 Oct , Alexander Shiyan wrote: > On Thu, 4 Oct 2012 14:52:29 +0200 > Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote: > > > On 16:37 Thu 04 Oct , Alexander Shiyan wrote: > > > This patch adds new architecture (CLPS711X) into barebox. > > > The core-logic functionality of the device is built around an ARM720T > > > processor running at clock speeds up to 90 MHz and 74 MHz. > > > Patch also adds a generic board support (CLEP7212, Linux ARM ID=91) and > > > serial driver for this CPU. > ... > > > +CONFIG_BAUDRATE=57600 > > why?? usally 115200 > It is impossible rate when CPU is clocked from an external source. > Possible rates is very limited for this platform and historically > (for this target) default baudrate is 57600. In any case it can be changed > via config option. so put a commet about it > > ... > > > +static int clocks_init(void) > > please split clocksource and clk > I do not know how best to do it because I need access to calculated values of > the frequency in initialization clkdev & clocksource. see my patch series I've send about clocksource the clocksource driver request it's clock and get it's rate the clock init is done speratly > > > > +void _setup_memcfg(int bank, u32 addr, u32 val) > > > +{ > > > + u32 tmp = readl(addr); > > > + > > > + switch (bank) { > > > + case 0: > > > + tmp &= ~(0xff << 0); > > > + tmp |= val << 0; > > > + break; > > > + case 1: > > > + tmp &= ~(0xff << 8); > > > + tmp |= val << 8; > > > + break; > > > + case 2: > > > + tmp &= ~(0xff << 16); > > > + tmp |= val << 16; > > > + break; > > > + case 3: > > > + tmp &= ~(0xff << 24); > > > + tmp |= val << 24; > > > + break; > > no default? > "Default" is not needed, because call is used internally in this unit and it > protected by "switch/case" in the caller. > > > > +void __noreturn reset_cpu(unsigned long addr) > > > +{ > > > + for (;;) > > no cpu reset? > This CPU don't have reset register. al lot of CPU does not ahve one they have instead a watchdog that can reset the SoC I never see a SoC that can not been reset by soft or can not been reset by a fault Best Regards, J. > > -- > Alexander Shiyan <shc_work@mail.ru> _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-04 17:08 ` Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-04 17:19 ` Alexander Shiyan 0 siblings, 0 replies; 16+ messages in thread From: Alexander Shiyan @ 2012-10-04 17:19 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox On Thu, 4 Oct 2012 19:08:32 +0200 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> wrote: ... > > > > +void __noreturn reset_cpu(unsigned long addr) > > > > +{ > > > > + for (;;) > > > no cpu reset? > > This CPU don't have reset register. > al lot of CPU does not ahve one they have instead a watchdog that can reset > the SoC I never see a SoC that can not been reset by soft > or can not been reset by a fault The CPU also has not a watchdog timer, so now you can see this one. We can only hack this function by adding asm("mov pc, #0"), but I'm not sure it's good. -- Alexander Shiyan <shc_work@mail.ru> _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-04 12:37 ` [PATCH 3/3] ARM: Add CLPS711X architecture Alexander Shiyan 2012-10-04 12:52 ` Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-05 12:12 ` Sascha Hauer 2012-10-07 10:03 ` Alexander Shiyan 1 sibling, 1 reply; 16+ messages in thread From: Sascha Hauer @ 2012-10-05 12:12 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On Thu, Oct 04, 2012 at 04:37:01PM +0400, Alexander Shiyan wrote: > This patch adds new architecture (CLPS711X) into barebox. > The core-logic functionality of the device is built around an ARM720T > processor running at clock speeds up to 90 MHz and 74 MHz. > Patch also adds a generic board support (CLEP7212, Linux ARM ID=91) and > serial driver for this CPU. > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig > index 2ed6789..e732775 100644 > --- a/arch/arm/cpu/Kconfig > +++ b/arch/arm/cpu/Kconfig > @@ -8,6 +8,21 @@ config CPU_32 > # which CPUs we support in the kernel image, and the compiler instruction > # optimiser behaviour. > > +# ARM720T > +config CPU_ARM720T > + bool > + select CPU_32v4T > + help > + The EP7312 is designed for ultra-low-power applications such as > + portable handheld devices that require digital audio decompression > + capability, Internet appliances and low-power industrial controls. > + > + More information on the Cirrus Logic EP7312 at > + <http://www.cirrus.com/en/products/ep7312.html>. > + > + Say Y if you want support for the ARM720T processor. > + Otherwise, say N. This seems wrong. Not every ARM720T is a EP7312. I just saw we have similar in the tree already with the ARM920T. > diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c > new file mode 100644 > index 0000000..2aecc2b > --- /dev/null > +++ b/arch/arm/mach-clps711x/devices.c > @@ -0,0 +1,58 @@ > +/* > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > + > +#include <asm/io.h> > + > +#include <mach/clps711x.h> > + > +void _setup_memcfg(int bank, u32 addr, u32 val) > +{ > + u32 tmp = readl(addr); > + > + switch (bank) { > + case 0: > + tmp &= ~(0xff << 0); > + tmp |= val << 0; > + break; > + case 1: > + tmp &= ~(0xff << 8); > + tmp |= val << 8; > + break; > + case 2: > + tmp &= ~(0xff << 16); > + tmp |= val << 16; > + break; > + case 3: > + tmp &= ~(0xff << 24); > + tmp |= val << 24; > + break; > + } > + > + writel(tmp, addr); > +} > + > +void setup_memcfg(int bank, u32 val) Please add a proper prefix to such functions (clps711x_ or similar) > +{ > + switch (bank) { > + case 0 ... 3: > + _setup_memcfg(bank, MEMCFG1, val); > + break; > + case 4 ... 7: > + _setup_memcfg(bank - 4, MEMCFG2, val); > + break; > + } > +} > + > +void register_uart(unsigned int id) Ditto. > diff --git a/arch/arm/mach-clps711x/lowlevel_init.c b/arch/arm/mach-clps711x/lowlevel_init.c > new file mode 100644 > index 0000000..ad70769 > --- /dev/null > +++ b/arch/arm/mach-clps711x/lowlevel_init.c > @@ -0,0 +1,61 @@ > +/* > + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > + > +#include <asm/io.h> > +#include <asm/barebox-arm.h> > + > +#include <mach/clps711x.h> > + > +#define MAIN_CLOCK 3686400 > +#define CPU_SPEED 92160000 > +#define BUS_SPEED (CPU_SPEED / 2) > + > +#define PLL_VALUE (((CPU_SPEED * 2) / MAIN_CLOCK) << 24) > +#define SDRAM_REFRESH_RATE (64 * (BUS_SPEED / (8192 * 1000))) > + > +void __noreturn reset_cpu(unsigned long addr) > +{ > + for (;;) > + ; > + > + unreachable(); > +} Use hang() instead. It will basically do the same but also print an error message. > + > +void __naked __bare_init board_init_lowlevel(void) > +{ > + u32 tmp; > + > + /* Setup base clock */ > + writel(SYSCON3_CLKCTL0 | SYSCON3_CLKCTL1, SYSCON3); > + asm("nop"); > + > + /* Setup PLL */ > + writel(PLL_VALUE, PLLW); > + asm("nop"); > + > + /* CLKEN select, SDRAM width=32 */ > + writel(SYSCON2_CLKENSL, SYSCON2); > + > + /* Enable SDQM pins */ > + tmp = readl(SYSCON3); > + tmp &= ~SYSCON3_ENPD67; > + writel(tmp, SYSCON3); > + > + /* Setup Refresh Rate (64ms 8K Blocks) */ > + writel(SDRAM_REFRESH_RATE, SDRFPR); > + > + /* Setup SDRAM (32MB, 16Bit*2, CAS=3) */ > + writel(SDCONF_CASLAT_3 | SDCONF_SIZE_256 | SDCONF_WIDTH_16 | > + SDCONF_CLKCTL | SDCONF_ACTIVE, SDCONF); This is board specific, right? Then this should be done in a board file. BTW board_init_lowlevel no longer exists. Rename this function to reset and call common_reset() on entry. > @@ -0,0 +1,119 @@ > +/* > + * Simple CLPS711X serial driver > + * > + * (C) Copyright 2012 Alexander Shiyan <shc_work@mail.ru> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + */ > + > +#include <common.h> > +#include <init.h> > +#include <io.h> > +#include <linux/clk.h> > + > +#include <mach/clps711x.h> Please drop this include and specify the registers as offsets to the base address here. > + > +static int clps711x_probe(struct device_d *dev) > +{ > + struct console_device *cdev = xzalloc(sizeof(struct console_device)); > + > + dev->priv = clk_get(NULL, "uart"); should be clk_get(dev, NULL); Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-05 12:12 ` Sascha Hauer @ 2012-10-07 10:03 ` Alexander Shiyan 2012-10-07 10:45 ` Sascha Hauer 0 siblings, 1 reply; 16+ messages in thread From: Alexander Shiyan @ 2012-10-07 10:03 UTC (permalink / raw) To: Sascha Hauer; +Cc: barebox On Fri, 5 Oct 2012 14:12:04 +0200 Sascha Hauer <s.hauer@pengutronix.de> wrote: ... > > +void __naked __bare_init board_init_lowlevel(void) > > +{ ... > > + /* Enable SDQM pins */ > > + tmp = readl(SYSCON3); > > + tmp &= ~SYSCON3_ENPD67; > > + writel(tmp, SYSCON3); > > + > > + /* Setup Refresh Rate (64ms 8K Blocks) */ > > + writel(SDRAM_REFRESH_RATE, SDRFPR); > > + > > + /* Setup SDRAM (32MB, 16Bit*2, CAS=3) */ > > + writel(SDCONF_CASLAT_3 | SDCONF_SIZE_256 | SDCONF_WIDTH_16 | > > + SDCONF_CLKCTL | SDCONF_ACTIVE, SDCONF); > > This is board specific, right? Then this should be done in a board file. > BTW board_init_lowlevel no longer exists. Rename this function to reset > and call common_reset() on entry. We should setup SDRAM before relocate code to it. In the board code we are alredy work in the RAM. So, we can not do this in board file. In any case in this proc we are setup maximux SDRAM size, then in board file we are calculate real memory size and setup it for bb & kernel. ... > > +/* > > + * Simple CLPS711X serial driver > > + * > > + * (C) Copyright 2012 Alexander Shiyan <shc_work@mail.ru> > > + * > > + * This program is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of > > + * the License, or (at your option) any later version. > > + */ > > + > > +#include <common.h> > > +#include <init.h> > > +#include <io.h> > > +#include <linux/clk.h> > > + > > +#include <mach/clps711x.h> > > Please drop this include and specify the registers as offsets to the > base address here. It is very strange for me. You mean that we should separate all definitions? -- Alexander Shiyan <shc_work@mail.ru> _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-07 10:03 ` Alexander Shiyan @ 2012-10-07 10:45 ` Sascha Hauer 2012-10-07 10:57 ` Alexander Shiyan 0 siblings, 1 reply; 16+ messages in thread From: Sascha Hauer @ 2012-10-07 10:45 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On Sun, Oct 07, 2012 at 02:03:37PM +0400, Alexander Shiyan wrote: > On Fri, 5 Oct 2012 14:12:04 +0200 > Sascha Hauer <s.hauer@pengutronix.de> wrote: > > ... > > > +void __naked __bare_init board_init_lowlevel(void) > > > +{ > ... > > > + /* Enable SDQM pins */ > > > + tmp = readl(SYSCON3); > > > + tmp &= ~SYSCON3_ENPD67; > > > + writel(tmp, SYSCON3); > > > + > > > + /* Setup Refresh Rate (64ms 8K Blocks) */ > > > + writel(SDRAM_REFRESH_RATE, SDRFPR); > > > + > > > + /* Setup SDRAM (32MB, 16Bit*2, CAS=3) */ > > > + writel(SDCONF_CASLAT_3 | SDCONF_SIZE_256 | SDCONF_WIDTH_16 | > > > + SDCONF_CLKCTL | SDCONF_ACTIVE, SDCONF); > > > > This is board specific, right? Then this should be done in a board file. > > BTW board_init_lowlevel no longer exists. Rename this function to reset > > and call common_reset() on entry. > We should setup SDRAM before relocate code to it. In the board code we are > alredy work in the RAM. So, we can not do this in board file. > In any case in this proc we are setup maximux SDRAM size, then in board file > we are calculate real memory size and setup it for bb & kernel. If you think the above code can work on all boards with this SoC then it's fine the way it is. Otherwise normally the board_init_lowlevel() (now reset()) is board specific, so every board has it's own. Then common code can be called from there. > > > + > > > +#include <mach/clps711x.h> > > > > Please drop this include and specify the registers as offsets to the > > base address here. > It is very strange for me. You mean that we should separate all definitions? Experience shows that it's best to have a SoC file which contains the base addresses to the different units of the SoC, but to keep the unit specific register offsets out of there. Silicon vendors tend to reuse the different controllers on the next SoC. In this case you would end up in adding the same register definitions in every SoC file again. Take the following example: u32 syscon = cdev->dev->id ? SYSCON2 : SYSCON1; A future SoC might have three of the same UARTs at different addresses in which case you'd have to adjust the driver for it. So instead of doing this: #define SYSCON2 (REGS_BASE + 0x1100) #define SYSCON1 (REGS_BASE + 0x0100) Do a: #define CLPS711X_UART1_BASE (REGS_BASE + 0x0) #define CLPS711X_UART2_BASE (REGS_BASE + 0x1000) add_clps711x_uart(CLPS711X_UART1_BASE); And in the driver: #define SYSCON 0x100 ... writel(0xdeadbeef, base + SYSCON); ... Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-07 10:45 ` Sascha Hauer @ 2012-10-07 10:57 ` Alexander Shiyan 2012-10-07 11:55 ` Sascha Hauer 0 siblings, 1 reply; 16+ messages in thread From: Alexander Shiyan @ 2012-10-07 10:57 UTC (permalink / raw) To: Sascha Hauer; +Cc: barebox On Sun, 7 Oct 2012 12:45:50 +0200 Sascha Hauer <s.hauer@pengutronix.de> wrote: ... > And in the driver: > > #define SYSCON 0x100 > > ... > writel(0xdeadbeef, base + SYSCON); > ... You a right, but SYSCON is used not only for UARTs. This register also used for setup timers, keypad, lcd, spi etc... Just look on bit definitions. Same I can say about other resisters. In this case we have some redundancy definitions. I will think about other way. -- Alexander Shiyan <shc_work@mail.ru> _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 3/3] ARM: Add CLPS711X architecture 2012-10-07 10:57 ` Alexander Shiyan @ 2012-10-07 11:55 ` Sascha Hauer 0 siblings, 0 replies; 16+ messages in thread From: Sascha Hauer @ 2012-10-07 11:55 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On Sun, Oct 07, 2012 at 02:57:01PM +0400, Alexander Shiyan wrote: > On Sun, 7 Oct 2012 12:45:50 +0200 > Sascha Hauer <s.hauer@pengutronix.de> wrote: > > ... > > And in the driver: > > > > #define SYSCON 0x100 > > > > ... > > writel(0xdeadbeef, base + SYSCON); > > ... > You a right, but SYSCON is used not only for UARTs. This register also > used for setup timers, keypad, lcd, spi etc... Just look on bit definitions. > Same I can say about other resisters. Oh my gosh, that indeed looks strange... Normally register regions are reserved for separate units, on this SoC it seems more that bit positions inside registers are reserved for separate units ;) > In this case we have some redundancy definitions. I will think about other way. Try and have a look if you could clean this up a bit, but it might be that you already found the best solution. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU. 2012-10-04 12:36 [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Alexander Shiyan 2012-10-04 12:37 ` [PATCH 2/3] Add more generated files to .gitignore Alexander Shiyan 2012-10-04 12:37 ` [PATCH 3/3] ARM: Add CLPS711X architecture Alexander Shiyan @ 2012-10-05 11:50 ` Sascha Hauer 2 siblings, 0 replies; 16+ messages in thread From: Sascha Hauer @ 2012-10-05 11:50 UTC (permalink / raw) To: Alexander Shiyan; +Cc: barebox On Thu, Oct 04, 2012 at 04:36:59PM +0400, Alexander Shiyan wrote: > > Signed-off-by: Alexander Shiyan <shc_work@mail.ru> > --- Applied (this one). Thanks Sascha > arch/arm/cpu/Kconfig | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/cpu/Kconfig b/arch/arm/cpu/Kconfig > index f55e862..2ed6789 100644 > --- a/arch/arm/cpu/Kconfig > +++ b/arch/arm/cpu/Kconfig > @@ -17,7 +17,7 @@ config CPU_ARM920T > and is used in the Maverick EP9312 and the Samsung S3C2410. > > More information on the Maverick EP9312 at > - <http://linuxdevices.com/products/PD2382866068.html>. > + <http://www.cirrus.com/en/products/ep9312.html>. > > Say Y if you want support for the ARM920T processor. > Otherwise, say N. > -- > 1.7.3.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2012-10-07 11:55 UTC | newest] Thread overview: 16+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-10-04 12:36 [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Alexander Shiyan 2012-10-04 12:37 ` [PATCH 2/3] Add more generated files to .gitignore Alexander Shiyan 2012-10-04 12:53 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 13:04 ` Re[2]: " Alexander Shiyan 2012-10-04 13:20 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 12:37 ` [PATCH 3/3] ARM: Add CLPS711X architecture Alexander Shiyan 2012-10-04 12:52 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 15:14 ` Alexander Shiyan 2012-10-04 17:08 ` Jean-Christophe PLAGNIOL-VILLARD 2012-10-04 17:19 ` Alexander Shiyan 2012-10-05 12:12 ` Sascha Hauer 2012-10-07 10:03 ` Alexander Shiyan 2012-10-07 10:45 ` Sascha Hauer 2012-10-07 10:57 ` Alexander Shiyan 2012-10-07 11:55 ` Sascha Hauer 2012-10-05 11:50 ` [PATCH 1/3] ARM: Fix Kconfig link for Cirrus Logic EP9312 CPU Sascha Hauer
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.