NILFS: corrupt root inode after Turbo Mode?

[Piotr Szymaniak <szarpaj-TbOm9Ca2r9GrDJvtcaxF/A@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1008 bytes --]

Hi list.

I'm using nilfs2 on my Raspberry Pi rootfs. I've played around with
Raspberry Pi Turbo Mode and today it refused to boot. It's a headless
setup so I moved the SD Card to my other machine and tried to mount
rootfs partition:

maszyn ~ # mount.nilfs2 /dev/sdf3 /tmp/rpi
mount.nilfs2: Error while mounting /dev/sdf3 on /tmp/rpi: Invalid
argument

dmesg shows:
(...)
[43893.754525] segctord starting. Construction interval = 300 seconds,
CP frequency < 30 seconds
[43893.760245] NILFS: corrupt root inode.

Where should I go from here? I can hook it up via HDMI to some screen to
see if there's some error msg on rPi.

I'm using official Raspberry Pi linux 3.2.27 from github [1] (last
updated 2-4 days ago).

[1] https://github.com/raspberrypi/linux


Piotr Szymaniak.
-- 
 ALARM.
 Przyspieszasz kroku, zbiegasz po stoku. Nie mozesz sie ruszyc ni w przod,
ni w tyl, spojrz prosto w lufe i modl sie, bys zyl, zyl, zyl.
   -- Ken Kesey, "One Flew Over The Cuckoo's Nest"

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]