* Re: [git:v4l-dvb/for_v3.7] [media] tda18271-common: hold the I2C adapter during write transfers [not found] <E1TKqkK-0005vN-Nl@www.linuxtv.org> @ 2012-10-07 13:19 ` Michael Krufky 2012-10-09 22:44 ` Mauro Carvalho Chehab 0 siblings, 1 reply; 3+ messages in thread From: Michael Krufky @ 2012-10-07 13:19 UTC (permalink / raw) To: linux-media; +Cc: linuxtv-commits umm, again, i didn't actually ACK the patch, I verbally said "ok, i guess" You shouldn't forge someone's signature, Mauro. :-( On Sun, Oct 7, 2012 at 8:43 AM, Mauro Carvalho Chehab <mchehab@redhat.com> wrote: > This is an automatic generated email to let you know that the following patch were queued at the > http://git.linuxtv.org/media_tree.git tree: > > Subject: [media] tda18271-common: hold the I2C adapter during write transfers > Author: Mauro Carvalho Chehab <mchehab@redhat.com> > Date: Fri Sep 28 11:04:21 2012 -0300 > > The tda18271 datasheet says: > "The image rejection calibration and RF tracking filter > calibration must be launched exactly as described in the > flowchart, otherwise bad calibration or even blocking of the > TDA18211HD can result making it impossible to communicate > via the I2C-bus." > (yeah, tda18271 refers there to tda18211 - likely a typo at their > datasheets) > That likely explains why sometimes tda18271 stops answering. That > is now happening more often on designs with drx-k chips, as the > firmware is now loaded asyncrousnly there. > While the above text doesn't explicitly tell that the I2C bus > couldn't be used by other devices during such initialization, > that seems to be a requirement there. > So, let's explicitly use the I2C lock there, avoiding I2C bus > share during those critical moments. > Compile-tested only. Please test. > > Acked-by: Michael Krufky <mkrufky@linuxtv.org> > Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> > > drivers/media/tuners/tda18271-common.c | 104 ++++++++++++++++++++++---------- > 1 files changed, 71 insertions(+), 33 deletions(-) > > --- > > http://git.linuxtv.org/media_tree.git?a=commitdiff;h=78ef81f6ea9649fd09d1fafcfa0ad68763172c42 > > diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c > index 221171e..18c77af 100644 > --- a/drivers/media/tuners/tda18271-common.c > +++ b/drivers/media/tuners/tda18271-common.c > @@ -187,7 +187,8 @@ int tda18271_read_extended(struct dvb_frontend *fe) > return (ret == 2 ? 0 : ret); > } > > -int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > +static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len, > + bool lock_i2c) > { > struct tda18271_priv *priv = fe->tuner_priv; > unsigned char *regs = priv->tda18271_regs; > @@ -198,7 +199,6 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > BUG_ON((len == 0) || (idx + len > sizeof(buf))); > > - > switch (priv->small_i2c) { > case TDA18271_03_BYTE_CHUNK_INIT: > max = 3; > @@ -214,7 +214,19 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > max = 39; > } > > - tda18271_i2c_gate_ctrl(fe, 1); > + > + /* > + * If lock_i2c is true, it will take the I2C bus for tda18271 private > + * usage during the entire write ops, as otherwise, bad things could > + * happen. > + * During device init, several write operations will happen. So, > + * tda18271_init_regs controls the I2C lock directly, > + * disabling lock_i2c here. > + */ > + if (lock_i2c) { > + tda18271_i2c_gate_ctrl(fe, 1); > + i2c_lock_adapter(priv->i2c_props.adap); > + } > while (len) { > if (max > len) > max = len; > @@ -226,14 +238,17 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > msg.len = max + 1; > > /* write registers */ > - ret = i2c_transfer(priv->i2c_props.adap, &msg, 1); > + ret = __i2c_transfer(priv->i2c_props.adap, &msg, 1); > if (ret != 1) > break; > > idx += max; > len -= max; > } > - tda18271_i2c_gate_ctrl(fe, 0); > + if (lock_i2c) { > + i2c_unlock_adapter(priv->i2c_props.adap); > + tda18271_i2c_gate_ctrl(fe, 0); > + } > > if (ret != 1) > tda_err("ERROR: idx = 0x%x, len = %d, " > @@ -242,10 +257,16 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > return (ret == 1 ? 0 : ret); > } > > +int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > +{ > + return __tda18271_write_regs(fe, idx, len, true); > +} > + > /*---------------------------------------------------------------------*/ > > -int tda18271_charge_pump_source(struct dvb_frontend *fe, > - enum tda18271_pll pll, int force) > +static int __tda18271_charge_pump_source(struct dvb_frontend *fe, > + enum tda18271_pll pll, int force, > + bool lock_i2c) > { > struct tda18271_priv *priv = fe->tuner_priv; > unsigned char *regs = priv->tda18271_regs; > @@ -255,9 +276,16 @@ int tda18271_charge_pump_source(struct dvb_frontend *fe, > regs[r_cp] &= ~0x20; > regs[r_cp] |= ((force & 1) << 5); > > - return tda18271_write_regs(fe, r_cp, 1); > + return __tda18271_write_regs(fe, r_cp, 1, lock_i2c); > +} > + > +int tda18271_charge_pump_source(struct dvb_frontend *fe, > + enum tda18271_pll pll, int force) > +{ > + return __tda18271_charge_pump_source(fe, pll, force, true); > } > > + > int tda18271_init_regs(struct dvb_frontend *fe) > { > struct tda18271_priv *priv = fe->tuner_priv; > @@ -267,6 +295,13 @@ int tda18271_init_regs(struct dvb_frontend *fe) > i2c_adapter_id(priv->i2c_props.adap), > priv->i2c_props.addr); > > + /* > + * Don't let any other I2C transfer to happen at adapter during init, > + * as those could cause bad things > + */ > + tda18271_i2c_gate_ctrl(fe, 1); > + i2c_lock_adapter(priv->i2c_props.adap); > + > /* initialize registers */ > switch (priv->id) { > case TDA18271HDC1: > @@ -352,28 +387,28 @@ int tda18271_init_regs(struct dvb_frontend *fe) > regs[R_EB22] = 0x48; > regs[R_EB23] = 0xb0; > > - tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); > + __tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS, false); > > /* setup agc1 gain */ > regs[R_EB17] = 0x00; > - tda18271_write_regs(fe, R_EB17, 1); > + __tda18271_write_regs(fe, R_EB17, 1, false); > regs[R_EB17] = 0x03; > - tda18271_write_regs(fe, R_EB17, 1); > + __tda18271_write_regs(fe, R_EB17, 1, false); > regs[R_EB17] = 0x43; > - tda18271_write_regs(fe, R_EB17, 1); > + __tda18271_write_regs(fe, R_EB17, 1, false); > regs[R_EB17] = 0x4c; > - tda18271_write_regs(fe, R_EB17, 1); > + __tda18271_write_regs(fe, R_EB17, 1, false); > > /* setup agc2 gain */ > if ((priv->id) == TDA18271HDC1) { > regs[R_EB20] = 0xa0; > - tda18271_write_regs(fe, R_EB20, 1); > + __tda18271_write_regs(fe, R_EB20, 1, false); > regs[R_EB20] = 0xa7; > - tda18271_write_regs(fe, R_EB20, 1); > + __tda18271_write_regs(fe, R_EB20, 1, false); > regs[R_EB20] = 0xe7; > - tda18271_write_regs(fe, R_EB20, 1); > + __tda18271_write_regs(fe, R_EB20, 1, false); > regs[R_EB20] = 0xec; > - tda18271_write_regs(fe, R_EB20, 1); > + __tda18271_write_regs(fe, R_EB20, 1, false); > } > > /* image rejection calibration */ > @@ -391,21 +426,21 @@ int tda18271_init_regs(struct dvb_frontend *fe) > regs[R_MD2] = 0x08; > regs[R_MD3] = 0x00; > > - tda18271_write_regs(fe, R_EP3, 11); > + __tda18271_write_regs(fe, R_EP3, 11, false); > > if ((priv->id) == TDA18271HDC2) { > /* main pll cp source on */ > - tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1); > + __tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1, false); > msleep(1); > > /* main pll cp source off */ > - tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0); > + __tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0, false); > } > > msleep(5); /* pll locking */ > > /* launch detector */ > - tda18271_write_regs(fe, R_EP1, 1); > + __tda18271_write_regs(fe, R_EP1, 1, false); > msleep(5); /* wanted low measurement */ > > regs[R_EP5] = 0x85; > @@ -413,11 +448,11 @@ int tda18271_init_regs(struct dvb_frontend *fe) > regs[R_CD1] = 0x66; > regs[R_CD2] = 0x70; > > - tda18271_write_regs(fe, R_EP3, 7); > + __tda18271_write_regs(fe, R_EP3, 7, false); > msleep(5); /* pll locking */ > > /* launch optimization algorithm */ > - tda18271_write_regs(fe, R_EP2, 1); > + __tda18271_write_regs(fe, R_EP2, 1, false); > msleep(30); /* image low optimization completion */ > > /* mid-band */ > @@ -428,11 +463,11 @@ int tda18271_init_regs(struct dvb_frontend *fe) > regs[R_MD1] = 0x73; > regs[R_MD2] = 0x1a; > > - tda18271_write_regs(fe, R_EP3, 11); > + __tda18271_write_regs(fe, R_EP3, 11, false); > msleep(5); /* pll locking */ > > /* launch detector */ > - tda18271_write_regs(fe, R_EP1, 1); > + __tda18271_write_regs(fe, R_EP1, 1, false); > msleep(5); /* wanted mid measurement */ > > regs[R_EP5] = 0x86; > @@ -440,11 +475,11 @@ int tda18271_init_regs(struct dvb_frontend *fe) > regs[R_CD1] = 0x66; > regs[R_CD2] = 0xa0; > > - tda18271_write_regs(fe, R_EP3, 7); > + __tda18271_write_regs(fe, R_EP3, 7, false); > msleep(5); /* pll locking */ > > /* launch optimization algorithm */ > - tda18271_write_regs(fe, R_EP2, 1); > + __tda18271_write_regs(fe, R_EP2, 1, false); > msleep(30); /* image mid optimization completion */ > > /* high-band */ > @@ -456,30 +491,33 @@ int tda18271_init_regs(struct dvb_frontend *fe) > regs[R_MD1] = 0x71; > regs[R_MD2] = 0xcd; > > - tda18271_write_regs(fe, R_EP3, 11); > + __tda18271_write_regs(fe, R_EP3, 11, false); > msleep(5); /* pll locking */ > > /* launch detector */ > - tda18271_write_regs(fe, R_EP1, 1); > + __tda18271_write_regs(fe, R_EP1, 1, false); > msleep(5); /* wanted high measurement */ > > regs[R_EP5] = 0x87; > regs[R_CD1] = 0x65; > regs[R_CD2] = 0x50; > > - tda18271_write_regs(fe, R_EP3, 7); > + __tda18271_write_regs(fe, R_EP3, 7, false); > msleep(5); /* pll locking */ > > /* launch optimization algorithm */ > - tda18271_write_regs(fe, R_EP2, 1); > + __tda18271_write_regs(fe, R_EP2, 1, false); > msleep(30); /* image high optimization completion */ > > /* return to normal mode */ > regs[R_EP4] = 0x64; > - tda18271_write_regs(fe, R_EP4, 1); > + __tda18271_write_regs(fe, R_EP4, 1, false); > > /* synchronize */ > - tda18271_write_regs(fe, R_EP1, 1); > + __tda18271_write_regs(fe, R_EP1, 1, false); > + > + i2c_unlock_adapter(priv->i2c_props.adap); > + tda18271_i2c_gate_ctrl(fe, 0); > > return 0; > } ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [git:v4l-dvb/for_v3.7] [media] tda18271-common: hold the I2C adapter during write transfers 2012-10-07 13:19 ` [git:v4l-dvb/for_v3.7] [media] tda18271-common: hold the I2C adapter during write transfers Michael Krufky @ 2012-10-09 22:44 ` Mauro Carvalho Chehab 2012-10-09 23:17 ` Michael Krufky 0 siblings, 1 reply; 3+ messages in thread From: Mauro Carvalho Chehab @ 2012-10-09 22:44 UTC (permalink / raw) To: Michael Krufky; +Cc: linux-media, linuxtv-commits Em Sun, 7 Oct 2012 09:19:51 -0400 Michael Krufky <mkrufky@linuxtv.org> escreveu: > umm, again, i didn't actually ACK the patch, I verbally said "ok, i guess" > > You shouldn't forge someone's signature, Mauro. :-( First of all, acked-by is not a signature. Those tags (acked, reviewed, tested, reported, etc) are pure indications of the status of the patch, e. g. if someone looked into the issue. In this specific case, what you said, instead was, literally: "So, I retract my NACK." Well, you're the driver maintainer, so I expected your considerations. You firstly reviewed it and gave a NACK. Then, you reviewed it again and reverted a NACK. The opposite of a NACK is an ACK. This is pure boolean. If you had, instead asked me for more time to review, I would have kept it in hold. Now that it got merged, what we can do is to revert it, if you have good reasons for that, or to keep it. Your call. Regards, Mauro > > On Sun, Oct 7, 2012 at 8:43 AM, Mauro Carvalho Chehab > <mchehab@redhat.com> wrote: > > This is an automatic generated email to let you know that the following patch were queued at the > > http://git.linuxtv.org/media_tree.git tree: > > > > Subject: [media] tda18271-common: hold the I2C adapter during write transfers > > Author: Mauro Carvalho Chehab <mchehab@redhat.com> > > Date: Fri Sep 28 11:04:21 2012 -0300 > > > > The tda18271 datasheet says: > > "The image rejection calibration and RF tracking filter > > calibration must be launched exactly as described in the > > flowchart, otherwise bad calibration or even blocking of the > > TDA18211HD can result making it impossible to communicate > > via the I2C-bus." > > (yeah, tda18271 refers there to tda18211 - likely a typo at their > > datasheets) > > That likely explains why sometimes tda18271 stops answering. That > > is now happening more often on designs with drx-k chips, as the > > firmware is now loaded asyncrousnly there. > > While the above text doesn't explicitly tell that the I2C bus > > couldn't be used by other devices during such initialization, > > that seems to be a requirement there. > > So, let's explicitly use the I2C lock there, avoiding I2C bus > > share during those critical moments. > > Compile-tested only. Please test. > > > > Acked-by: Michael Krufky <mkrufky@linuxtv.org> > > Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> > > > > drivers/media/tuners/tda18271-common.c | 104 ++++++++++++++++++++++---------- > > 1 files changed, 71 insertions(+), 33 deletions(-) > > > > --- > > > > http://git.linuxtv.org/media_tree.git?a=commitdiff;h=78ef81f6ea9649fd09d1fafcfa0ad68763172c42 > > > > diff --git a/drivers/media/tuners/tda18271-common.c b/drivers/media/tuners/tda18271-common.c > > index 221171e..18c77af 100644 > > --- a/drivers/media/tuners/tda18271-common.c > > +++ b/drivers/media/tuners/tda18271-common.c > > @@ -187,7 +187,8 @@ int tda18271_read_extended(struct dvb_frontend *fe) > > return (ret == 2 ? 0 : ret); > > } > > > > -int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > +static int __tda18271_write_regs(struct dvb_frontend *fe, int idx, int len, > > + bool lock_i2c) > > { > > struct tda18271_priv *priv = fe->tuner_priv; > > unsigned char *regs = priv->tda18271_regs; > > @@ -198,7 +199,6 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > > > BUG_ON((len == 0) || (idx + len > sizeof(buf))); > > > > - > > switch (priv->small_i2c) { > > case TDA18271_03_BYTE_CHUNK_INIT: > > max = 3; > > @@ -214,7 +214,19 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > max = 39; > > } > > > > - tda18271_i2c_gate_ctrl(fe, 1); > > + > > + /* > > + * If lock_i2c is true, it will take the I2C bus for tda18271 private > > + * usage during the entire write ops, as otherwise, bad things could > > + * happen. > > + * During device init, several write operations will happen. So, > > + * tda18271_init_regs controls the I2C lock directly, > > + * disabling lock_i2c here. > > + */ > > + if (lock_i2c) { > > + tda18271_i2c_gate_ctrl(fe, 1); > > + i2c_lock_adapter(priv->i2c_props.adap); > > + } > > while (len) { > > if (max > len) > > max = len; > > @@ -226,14 +238,17 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > msg.len = max + 1; > > > > /* write registers */ > > - ret = i2c_transfer(priv->i2c_props.adap, &msg, 1); > > + ret = __i2c_transfer(priv->i2c_props.adap, &msg, 1); > > if (ret != 1) > > break; > > > > idx += max; > > len -= max; > > } > > - tda18271_i2c_gate_ctrl(fe, 0); > > + if (lock_i2c) { > > + i2c_unlock_adapter(priv->i2c_props.adap); > > + tda18271_i2c_gate_ctrl(fe, 0); > > + } > > > > if (ret != 1) > > tda_err("ERROR: idx = 0x%x, len = %d, " > > @@ -242,10 +257,16 @@ int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > return (ret == 1 ? 0 : ret); > > } > > > > +int tda18271_write_regs(struct dvb_frontend *fe, int idx, int len) > > +{ > > + return __tda18271_write_regs(fe, idx, len, true); > > +} > > + > > /*---------------------------------------------------------------------*/ > > > > -int tda18271_charge_pump_source(struct dvb_frontend *fe, > > - enum tda18271_pll pll, int force) > > +static int __tda18271_charge_pump_source(struct dvb_frontend *fe, > > + enum tda18271_pll pll, int force, > > + bool lock_i2c) > > { > > struct tda18271_priv *priv = fe->tuner_priv; > > unsigned char *regs = priv->tda18271_regs; > > @@ -255,9 +276,16 @@ int tda18271_charge_pump_source(struct dvb_frontend *fe, > > regs[r_cp] &= ~0x20; > > regs[r_cp] |= ((force & 1) << 5); > > > > - return tda18271_write_regs(fe, r_cp, 1); > > + return __tda18271_write_regs(fe, r_cp, 1, lock_i2c); > > +} > > + > > +int tda18271_charge_pump_source(struct dvb_frontend *fe, > > + enum tda18271_pll pll, int force) > > +{ > > + return __tda18271_charge_pump_source(fe, pll, force, true); > > } > > > > + > > int tda18271_init_regs(struct dvb_frontend *fe) > > { > > struct tda18271_priv *priv = fe->tuner_priv; > > @@ -267,6 +295,13 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > i2c_adapter_id(priv->i2c_props.adap), > > priv->i2c_props.addr); > > > > + /* > > + * Don't let any other I2C transfer to happen at adapter during init, > > + * as those could cause bad things > > + */ > > + tda18271_i2c_gate_ctrl(fe, 1); > > + i2c_lock_adapter(priv->i2c_props.adap); > > + > > /* initialize registers */ > > switch (priv->id) { > > case TDA18271HDC1: > > @@ -352,28 +387,28 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > regs[R_EB22] = 0x48; > > regs[R_EB23] = 0xb0; > > > > - tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS); > > + __tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS, false); > > > > /* setup agc1 gain */ > > regs[R_EB17] = 0x00; > > - tda18271_write_regs(fe, R_EB17, 1); > > + __tda18271_write_regs(fe, R_EB17, 1, false); > > regs[R_EB17] = 0x03; > > - tda18271_write_regs(fe, R_EB17, 1); > > + __tda18271_write_regs(fe, R_EB17, 1, false); > > regs[R_EB17] = 0x43; > > - tda18271_write_regs(fe, R_EB17, 1); > > + __tda18271_write_regs(fe, R_EB17, 1, false); > > regs[R_EB17] = 0x4c; > > - tda18271_write_regs(fe, R_EB17, 1); > > + __tda18271_write_regs(fe, R_EB17, 1, false); > > > > /* setup agc2 gain */ > > if ((priv->id) == TDA18271HDC1) { > > regs[R_EB20] = 0xa0; > > - tda18271_write_regs(fe, R_EB20, 1); > > + __tda18271_write_regs(fe, R_EB20, 1, false); > > regs[R_EB20] = 0xa7; > > - tda18271_write_regs(fe, R_EB20, 1); > > + __tda18271_write_regs(fe, R_EB20, 1, false); > > regs[R_EB20] = 0xe7; > > - tda18271_write_regs(fe, R_EB20, 1); > > + __tda18271_write_regs(fe, R_EB20, 1, false); > > regs[R_EB20] = 0xec; > > - tda18271_write_regs(fe, R_EB20, 1); > > + __tda18271_write_regs(fe, R_EB20, 1, false); > > } > > > > /* image rejection calibration */ > > @@ -391,21 +426,21 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > regs[R_MD2] = 0x08; > > regs[R_MD3] = 0x00; > > > > - tda18271_write_regs(fe, R_EP3, 11); > > + __tda18271_write_regs(fe, R_EP3, 11, false); > > > > if ((priv->id) == TDA18271HDC2) { > > /* main pll cp source on */ > > - tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1); > > + __tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 1, false); > > msleep(1); > > > > /* main pll cp source off */ > > - tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0); > > + __tda18271_charge_pump_source(fe, TDA18271_MAIN_PLL, 0, false); > > } > > > > msleep(5); /* pll locking */ > > > > /* launch detector */ > > - tda18271_write_regs(fe, R_EP1, 1); > > + __tda18271_write_regs(fe, R_EP1, 1, false); > > msleep(5); /* wanted low measurement */ > > > > regs[R_EP5] = 0x85; > > @@ -413,11 +448,11 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > regs[R_CD1] = 0x66; > > regs[R_CD2] = 0x70; > > > > - tda18271_write_regs(fe, R_EP3, 7); > > + __tda18271_write_regs(fe, R_EP3, 7, false); > > msleep(5); /* pll locking */ > > > > /* launch optimization algorithm */ > > - tda18271_write_regs(fe, R_EP2, 1); > > + __tda18271_write_regs(fe, R_EP2, 1, false); > > msleep(30); /* image low optimization completion */ > > > > /* mid-band */ > > @@ -428,11 +463,11 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > regs[R_MD1] = 0x73; > > regs[R_MD2] = 0x1a; > > > > - tda18271_write_regs(fe, R_EP3, 11); > > + __tda18271_write_regs(fe, R_EP3, 11, false); > > msleep(5); /* pll locking */ > > > > /* launch detector */ > > - tda18271_write_regs(fe, R_EP1, 1); > > + __tda18271_write_regs(fe, R_EP1, 1, false); > > msleep(5); /* wanted mid measurement */ > > > > regs[R_EP5] = 0x86; > > @@ -440,11 +475,11 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > regs[R_CD1] = 0x66; > > regs[R_CD2] = 0xa0; > > > > - tda18271_write_regs(fe, R_EP3, 7); > > + __tda18271_write_regs(fe, R_EP3, 7, false); > > msleep(5); /* pll locking */ > > > > /* launch optimization algorithm */ > > - tda18271_write_regs(fe, R_EP2, 1); > > + __tda18271_write_regs(fe, R_EP2, 1, false); > > msleep(30); /* image mid optimization completion */ > > > > /* high-band */ > > @@ -456,30 +491,33 @@ int tda18271_init_regs(struct dvb_frontend *fe) > > regs[R_MD1] = 0x71; > > regs[R_MD2] = 0xcd; > > > > - tda18271_write_regs(fe, R_EP3, 11); > > + __tda18271_write_regs(fe, R_EP3, 11, false); > > msleep(5); /* pll locking */ > > > > /* launch detector */ > > - tda18271_write_regs(fe, R_EP1, 1); > > + __tda18271_write_regs(fe, R_EP1, 1, false); > > msleep(5); /* wanted high measurement */ > > > > regs[R_EP5] = 0x87; > > regs[R_CD1] = 0x65; > > regs[R_CD2] = 0x50; > > > > - tda18271_write_regs(fe, R_EP3, 7); > > + __tda18271_write_regs(fe, R_EP3, 7, false); > > msleep(5); /* pll locking */ > > > > /* launch optimization algorithm */ > > - tda18271_write_regs(fe, R_EP2, 1); > > + __tda18271_write_regs(fe, R_EP2, 1, false); > > msleep(30); /* image high optimization completion */ > > > > /* return to normal mode */ > > regs[R_EP4] = 0x64; > > - tda18271_write_regs(fe, R_EP4, 1); > > + __tda18271_write_regs(fe, R_EP4, 1, false); > > > > /* synchronize */ > > - tda18271_write_regs(fe, R_EP1, 1); > > + __tda18271_write_regs(fe, R_EP1, 1, false); > > + > > + i2c_unlock_adapter(priv->i2c_props.adap); > > + tda18271_i2c_gate_ctrl(fe, 0); > > > > return 0; > > } > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Regards, Mauro ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [git:v4l-dvb/for_v3.7] [media] tda18271-common: hold the I2C adapter during write transfers 2012-10-09 22:44 ` Mauro Carvalho Chehab @ 2012-10-09 23:17 ` Michael Krufky 0 siblings, 0 replies; 3+ messages in thread From: Michael Krufky @ 2012-10-09 23:17 UTC (permalink / raw) To: Mauro Carvalho Chehab; +Cc: linux-media, linuxtv-commits On Tue, Oct 9, 2012 at 6:44 PM, Mauro Carvalho Chehab <mchehab@redhat.com> wrote: > Em Sun, 7 Oct 2012 09:19:51 -0400 > Michael Krufky <mkrufky@linuxtv.org> escreveu: > >> umm, again, i didn't actually ACK the patch, I verbally said "ok, i guess" >> >> You shouldn't forge someone's signature, Mauro. :-( > > First of all, acked-by is not a signature. Those tags (acked, reviewed, tested, > reported, etc) are pure indications of the status of the patch, e. g. > if someone looked into the issue. > > In this specific case, what you said, instead was, literally: "So, I retract my NACK." > > Well, you're the driver maintainer, so I expected your considerations. > > You firstly reviewed it and gave a NACK. Then, you reviewed it again > and reverted a NACK. The opposite of a NACK is an ACK. This is pure boolean. > > If you had, instead asked me for more time to review, I would have kept > it in hold. > > Now that it got merged, what we can do is to revert it, if you have good > reasons for that, or to keep it. > > Your call. I understand. Thanks for explaining it. We spoke about this today in IRC, also... I'll send another patch when I have some time to address the trivial remaining issues. There is nothing wrong (afaik) with merging this patch for now. Thanks again, Mike ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-10-09 23:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <E1TKqkK-0005vN-Nl@www.linuxtv.org>
2012-10-07 13:19 ` [git:v4l-dvb/for_v3.7] [media] tda18271-common: hold the I2C adapter during write transfers Michael Krufky
2012-10-09 22:44 ` Mauro Carvalho Chehab
2012-10-09 23:17 ` Michael Krufky
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.