From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Tvrtko Ursulin <tvrtko@ursulin.net>
Cc: dm-crypt@saout.de, okozina@redhat.com,
linux-rt-users@vger.kernel.org, Milan Broz <gmazyland@gmail.com>,
linux-kernel@vger.kernel.org
Subject: Re: [dm-crypt] cryptsetup not working under 3.6 - RT patch set seem to break it
Date: Tue, 30 Oct 2012 10:40:01 +0100 [thread overview]
Message-ID: <20121030094001.GV639@pengutronix.de> (raw)
In-Reply-To: <508EEAF2.4090506@ursulin.net>
On Mon, Oct 29, 2012 at 08:45:38PM +0000, Tvrtko Ursulin wrote:
> On 29/10/12 20:14, Tvrtko Ursulin wrote:
> >On 29/10/12 19:47, Milan Broz wrote:
> >>On 10/29/2012 08:31 PM, Tvrtko Ursulin wrote:
> >>>Just tried 3.6.4 and it is still broken. Is there anything else I could
> >>>try to debug this?
> >>
> >>See response from response from Ondra on dmcrypt list - your kernel
> >>config
> >>is perhaps broken.
> >
> >I don't think that reached me - perhaps I was not copied.
> >
> >Weird yes, I mean no one can spot anything bad with my config...
> >
> >>Please use fresh checkout, run make oldconfig and try again.
> >>(Many people use 3.6 already and there is no other report.)
> >
> >... and I just used it today to configure a fresh 3.6.4 (plus -rt10
> >patches) without a problem.
> >
> >Unless RT patchset is the culprit. Hm.. that would be unexpected, but I
> >guess it is worth a shot. I'll let you know what happens without -rt.
>
> Ha, this is exciting, vanilla 3.6.4 works, with -rt10 patch it does not.
I experienced that problem, too. This is on a laptop with encrypted
rootfs, so debugging is a bit harder here. I am just setting up another
machine to debug that.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
WARNING: multiple messages have this Message-ID (diff)
From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Tvrtko Ursulin <tvrtko@ursulin.net>
Cc: Milan Broz <gmazyland@gmail.com>,
dm-crypt@saout.de, linux-kernel@vger.kernel.org,
okozina@redhat.com, linux-rt-users@vger.kernel.org
Subject: Re: [dm-crypt] cryptsetup not working under 3.6 - RT patch set seem to break it
Date: Tue, 30 Oct 2012 10:40:01 +0100 [thread overview]
Message-ID: <20121030094001.GV639@pengutronix.de> (raw)
In-Reply-To: <508EEAF2.4090506@ursulin.net>
On Mon, Oct 29, 2012 at 08:45:38PM +0000, Tvrtko Ursulin wrote:
> On 29/10/12 20:14, Tvrtko Ursulin wrote:
> >On 29/10/12 19:47, Milan Broz wrote:
> >>On 10/29/2012 08:31 PM, Tvrtko Ursulin wrote:
> >>>Just tried 3.6.4 and it is still broken. Is there anything else I could
> >>>try to debug this?
> >>
> >>See response from response from Ondra on dmcrypt list - your kernel
> >>config
> >>is perhaps broken.
> >
> >I don't think that reached me - perhaps I was not copied.
> >
> >Weird yes, I mean no one can spot anything bad with my config...
> >
> >>Please use fresh checkout, run make oldconfig and try again.
> >>(Many people use 3.6 already and there is no other report.)
> >
> >... and I just used it today to configure a fresh 3.6.4 (plus -rt10
> >patches) without a problem.
> >
> >Unless RT patchset is the culprit. Hm.. that would be unexpected, but I
> >guess it is worth a shot. I'll let you know what happens without -rt.
>
> Ha, this is exciting, vanilla 3.6.4 works, with -rt10 patch it does not.
I experienced that problem, too. This is on a laptop with encrypted
rootfs, so debugging is a bit harder here. I am just setting up another
machine to debug that.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
next prev parent reply other threads:[~2012-10-30 9:56 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-20 20:44 [dm-crypt] cryptsetup not working under 3.6 - regression from 3.4? Tvrtko Ursulin
2012-10-20 20:44 ` Tvrtko Ursulin
2012-10-21 9:53 ` [dm-crypt] " Milan Broz
2012-10-21 12:03 ` Tvrtko Ursulin
2012-10-21 12:20 ` Zdenek Kaspar
2012-10-21 12:36 ` Tvrtko Ursulin
2012-10-21 12:36 ` Tvrtko Ursulin
2012-10-21 19:29 ` [dm-crypt] " Milan Broz
2012-10-21 19:29 ` Milan Broz
2012-10-21 20:03 ` [dm-crypt] " Tvrtko Ursulin
2012-10-21 20:03 ` Tvrtko Ursulin
2012-10-22 14:27 ` [dm-crypt] " Ondrej Kozina
2012-10-29 19:31 ` Tvrtko Ursulin
2012-10-29 19:31 ` Tvrtko Ursulin
2012-10-29 19:47 ` [dm-crypt] " Milan Broz
2012-10-29 19:47 ` Milan Broz
2012-10-29 20:14 ` Tvrtko Ursulin
2012-10-29 20:14 ` Tvrtko Ursulin
2012-10-29 20:45 ` [dm-crypt] cryptsetup not working under 3.6 - RT patch set seem to break it Tvrtko Ursulin
2012-10-29 20:45 ` Tvrtko Ursulin
2012-10-29 20:45 ` Tvrtko Ursulin
2012-10-29 23:51 ` [dm-crypt] " Thomas Gleixner
2012-10-29 23:51 ` Thomas Gleixner
2012-10-30 9:40 ` Uwe Kleine-König [this message]
2012-10-30 9:40 ` Uwe Kleine-König
2012-10-30 9:55 ` Milan Broz
2012-10-30 9:55 ` Milan Broz
2012-10-30 9:55 ` Milan Broz
2012-10-30 15:27 ` [dm-crypt] [PATCH] Fix crypto api init for 3.6.4-rt10 Milan Broz
2012-10-30 15:27 ` Milan Broz
2012-10-30 17:57 ` [dm-crypt] " Thomas Gleixner
2012-10-30 17:57 ` Thomas Gleixner
2012-10-30 20:35 ` [dm-crypt] " Uwe Kleine-König
2012-10-30 20:35 ` Uwe Kleine-König
2012-10-30 20:35 ` Uwe Kleine-König
2012-10-30 18:24 ` [dm-crypt] " Tvrtko Ursulin
2012-10-30 18:24 ` Tvrtko Ursulin
2012-10-29 20:48 ` [dm-crypt] cryptsetup not working under 3.6 - regression from 3.4? Milan Broz
2012-10-29 20:48 ` Milan Broz
2012-10-21 10:00 ` Heinz Diehl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121030094001.GV639@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=dm-crypt@saout.de \
--cc=gmazyland@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rt-users@vger.kernel.org \
--cc=okozina@redhat.com \
--cc=tvrtko@ursulin.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.