All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>,
	devel@linuxdriverproject.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, linux-mm@kvack.org,
	ngupta@vflare.org, minchan@kernel.org, fschmaus@gmail.com,
	andor.daam@googlemail.com, ilendir@googlemail.com,
	akpm@linux-foundation.org, mgorman@suse.de
Subject: Re: [PATCH 2/5] mm: frontswap: lazy initialization to allow tmem backends to build/run as modules
Date: Fri, 2 Nov 2012 14:27:49 -0400	[thread overview]
Message-ID: <20121102182749.GB30100@konrad-lan.dumpdata.com> (raw)
In-Reply-To: <50915A5C.8000303@linux.vnet.ibm.com>

On Wed, Oct 31, 2012 at 12:05:32PM -0500, Seth Jennings wrote:
> On 10/31/2012 10:07 AM, Dan Magenheimer wrote:
> > With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to be
> > built/loaded as modules rather than built-in and enabled by a boot parameter,
> > this patch provides "lazy initialization", allowing backends to register to
> > frontswap even after swapon was run. Before a backend registers all calls
> > to init are recorded and the creation of tmem_pools delayed until a backend
> > registers or until a frontswap put is attempted.
> > 
> > Signed-off-by: Stefan Hengelein <ilendir@googlemail.com>
> > Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
> > Signed-off-by: Andor Daam <andor.daam@googlemail.com>
> > Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
> > ---
> >  include/linux/frontswap.h |    1 +
> >  mm/frontswap.c            |   70 +++++++++++++++++++++++++++++++++++++++-----
> >  2 files changed, 63 insertions(+), 8 deletions(-)
> > 
> > diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h
> > index 3044254..ef6ada6 100644
> > --- a/include/linux/frontswap.h
> > +++ b/include/linux/frontswap.h
> > @@ -23,6 +23,7 @@ extern void frontswap_writethrough(bool);
> >  extern void frontswap_tmem_exclusive_gets(bool);
> > 
> >  extern void __frontswap_init(unsigned type);
> > +#define FRONTSWAP_HAS_LAZY_INIT
> >  extern int __frontswap_store(struct page *page);
> >  extern int __frontswap_load(struct page *page);
> >  extern void __frontswap_invalidate_page(unsigned, pgoff_t);
> > diff --git a/mm/frontswap.c b/mm/frontswap.c
> > index 2890e67..523a19b 100644
> > --- a/mm/frontswap.c
> > +++ b/mm/frontswap.c
> > @@ -80,6 +80,19 @@ static inline void inc_frontswap_succ_stores(void) { }
> >  static inline void inc_frontswap_failed_stores(void) { }
> >  static inline void inc_frontswap_invalidates(void) { }
> >  #endif
> > +
> > +/*
> > + * When no backend is registered all calls to init are registered and
> > + * remembered but fail to create tmem_pools. When a backend registers with
> > + * frontswap the previous calls to init are executed to create tmem_pools
> > + * and set the respective poolids.
> > + * While no backend is registered all "puts", "gets" and "flushes" are
> > + * ignored or fail.
> > + */
> > +#define MAX_INITIALIZABLE_SD 32
> 
> MAX_INITIALIZABLE_SD should just be MAX_SWAPFILES
> 
> > +static int sds[MAX_INITIALIZABLE_SD];
> 
> Rather than store and array of enabled types indexed by type, why not
> an array of booleans indexed by type.  Or a bitfield if you really
> want to save space.
> 
> > +static int backend_registered;
> 
> (backend_registered) is equivalent to checking (frontswap_ops != NULL)
> right?
> 
> > +
> >  /*
> >   * Register operations for frontswap, returning previous thus allowing
> >   * detection of multiple backends and possible nesting.
> > @@ -87,9 +100,16 @@ static inline void inc_frontswap_invalidates(void) { }
> >  struct frontswap_ops frontswap_register_ops(struct frontswap_ops *ops)
> >  {
> >  	struct frontswap_ops old = frontswap_ops;
> > +	int i;
> > 
> >  	frontswap_ops = *ops;
> >  	frontswap_enabled = true;
> > +
> > +	backend_registered = 1;
> > +	for (i = 0; i < MAX_INITIALIZABLE_SD; i++) {
> > +		if (sds[i] != -1)
> > +			(*frontswap_ops.init)(sds[i]);
> > +	}
> >  	return old;
> >  }
> >  EXPORT_SYMBOL(frontswap_register_ops);
> > @@ -122,7 +142,10 @@ void __frontswap_init(unsigned type)
> >  	BUG_ON(sis == NULL);
> >  	if (sis->frontswap_map == NULL)
> >  		return;
> > -	frontswap_ops.init(type);
> > +	if (backend_registered) {
> > +		(*frontswap_ops.init)(type);
> > +		sds[type] = type;
> 
> This is weird, storing the type in an array indexed by type.  Hence my
> suggestion above about an array of booleans or a bitfield.
> 
> > +	}
> >  }
> >  EXPORT_SYMBOL(__frontswap_init);
> > 
> > @@ -147,10 +170,20 @@ int __frontswap_store(struct page *page)
> >  	struct swap_info_struct *sis = swap_info[type];
> >  	pgoff_t offset = swp_offset(entry);
> > 
> > +	if (!backend_registered) {
> > +		inc_frontswap_failed_stores();
> > +		return ret;
> > +	}
> > +
> >  	BUG_ON(!PageLocked(page));
> >  	BUG_ON(sis == NULL);
> >  	if (frontswap_test(sis, offset))
> >  		dup = 1;
> > +	if (type < MAX_INITIALIZABLE_SD && sds[type] == -1) {
> > +		/* lazy init call to handle post-boot insmod backends*/
> > +		(*frontswap_ops.init)(type);
> > +		sds[type] = type;
> > +	}
> >  	ret = frontswap_ops.store(type, offset, page);
> >  	if (ret == 0) {
> >  		frontswap_set(sis, offset);
> > @@ -186,6 +219,9 @@ int __frontswap_load(struct page *page)
> >  	struct swap_info_struct *sis = swap_info[type];
> >  	pgoff_t offset = swp_offset(entry);
> > 
> > +	if (!backend_registered)
> > +		return ret;
> > +
> >  	BUG_ON(!PageLocked(page));
> >  	BUG_ON(sis == NULL);
> >  	if (frontswap_test(sis, offset))
> > @@ -209,6 +245,9 @@ void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
> >  {
> >  	struct swap_info_struct *sis = swap_info[type];
> > 
> > +	if (!backend_registered)
> > +		return;
> > +
> >  	BUG_ON(sis == NULL);
> >  	if (frontswap_test(sis, offset)) {
> >  		frontswap_ops.invalidate_page(type, offset);
> > @@ -225,13 +264,23 @@ EXPORT_SYMBOL(__frontswap_invalidate_page);
> >  void __frontswap_invalidate_area(unsigned type)
> >  {
> >  	struct swap_info_struct *sis = swap_info[type];
> > -
> > -	BUG_ON(sis == NULL);
> > -	if (sis->frontswap_map == NULL)
> > -		return;
> > -	frontswap_ops.invalidate_area(type);
> > -	atomic_set(&sis->frontswap_pages, 0);
> > -	memset(sis->frontswap_map, 0, sis->max / sizeof(long));
> > +	int i;
> > +
> > +	if (backend_registered) {
> > +		BUG_ON(sis == NULL);
> > +		if (sis->frontswap_map == NULL)
> > +			return;
> > +		(*frontswap_ops.invalidate_area)(type);
> > +		atomic_set(&sis->frontswap_pages, 0);
> > +		memset(sis->frontswap_map, 0, sis->max / sizeof(long));
> > +	} else {
> > +		for (i = 0; i < MAX_INITIALIZABLE_SD; i++) {
> > +			if (sds[i] == type) {
> 
> Additional weirdness with sds.  It seems this whole for loop could
> just be reduced to:
> 
> sds[type] = -1;


How does this look? (I hadn't actually tested it, but did compile test
it)

WARNING: multiple messages have this Message-ID (diff)
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>,
	devel@linuxdriverproject.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, linux-mm@kvack.org,
	ngupta@vflare.org, minchan@kernel.org, fschmaus@gmail.com,
	andor.daam@googlemail.com, ilendir@googlemail.com,
	akpm@linux-foundation.org, mgorman@suse.de
Subject: Re: [PATCH 2/5] mm: frontswap: lazy initialization to allow tmem backends to build/run as modules
Date: Fri, 2 Nov 2012 14:27:49 -0400	[thread overview]
Message-ID: <20121102182749.GB30100@konrad-lan.dumpdata.com> (raw)
In-Reply-To: <50915A5C.8000303@linux.vnet.ibm.com>

On Wed, Oct 31, 2012 at 12:05:32PM -0500, Seth Jennings wrote:
> On 10/31/2012 10:07 AM, Dan Magenheimer wrote:
> > With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to be
> > built/loaded as modules rather than built-in and enabled by a boot parameter,
> > this patch provides "lazy initialization", allowing backends to register to
> > frontswap even after swapon was run. Before a backend registers all calls
> > to init are recorded and the creation of tmem_pools delayed until a backend
> > registers or until a frontswap put is attempted.
> > 
> > Signed-off-by: Stefan Hengelein <ilendir@googlemail.com>
> > Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
> > Signed-off-by: Andor Daam <andor.daam@googlemail.com>
> > Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
> > ---
> >  include/linux/frontswap.h |    1 +
> >  mm/frontswap.c            |   70 +++++++++++++++++++++++++++++++++++++++-----
> >  2 files changed, 63 insertions(+), 8 deletions(-)
> > 
> > diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h
> > index 3044254..ef6ada6 100644
> > --- a/include/linux/frontswap.h
> > +++ b/include/linux/frontswap.h
> > @@ -23,6 +23,7 @@ extern void frontswap_writethrough(bool);
> >  extern void frontswap_tmem_exclusive_gets(bool);
> > 
> >  extern void __frontswap_init(unsigned type);
> > +#define FRONTSWAP_HAS_LAZY_INIT
> >  extern int __frontswap_store(struct page *page);
> >  extern int __frontswap_load(struct page *page);
> >  extern void __frontswap_invalidate_page(unsigned, pgoff_t);
> > diff --git a/mm/frontswap.c b/mm/frontswap.c
> > index 2890e67..523a19b 100644
> > --- a/mm/frontswap.c
> > +++ b/mm/frontswap.c
> > @@ -80,6 +80,19 @@ static inline void inc_frontswap_succ_stores(void) { }
> >  static inline void inc_frontswap_failed_stores(void) { }
> >  static inline void inc_frontswap_invalidates(void) { }
> >  #endif
> > +
> > +/*
> > + * When no backend is registered all calls to init are registered and
> > + * remembered but fail to create tmem_pools. When a backend registers with
> > + * frontswap the previous calls to init are executed to create tmem_pools
> > + * and set the respective poolids.
> > + * While no backend is registered all "puts", "gets" and "flushes" are
> > + * ignored or fail.
> > + */
> > +#define MAX_INITIALIZABLE_SD 32
> 
> MAX_INITIALIZABLE_SD should just be MAX_SWAPFILES
> 
> > +static int sds[MAX_INITIALIZABLE_SD];
> 
> Rather than store and array of enabled types indexed by type, why not
> an array of booleans indexed by type.  Or a bitfield if you really
> want to save space.
> 
> > +static int backend_registered;
> 
> (backend_registered) is equivalent to checking (frontswap_ops != NULL)
> right?
> 
> > +
> >  /*
> >   * Register operations for frontswap, returning previous thus allowing
> >   * detection of multiple backends and possible nesting.
> > @@ -87,9 +100,16 @@ static inline void inc_frontswap_invalidates(void) { }
> >  struct frontswap_ops frontswap_register_ops(struct frontswap_ops *ops)
> >  {
> >  	struct frontswap_ops old = frontswap_ops;
> > +	int i;
> > 
> >  	frontswap_ops = *ops;
> >  	frontswap_enabled = true;
> > +
> > +	backend_registered = 1;
> > +	for (i = 0; i < MAX_INITIALIZABLE_SD; i++) {
> > +		if (sds[i] != -1)
> > +			(*frontswap_ops.init)(sds[i]);
> > +	}
> >  	return old;
> >  }
> >  EXPORT_SYMBOL(frontswap_register_ops);
> > @@ -122,7 +142,10 @@ void __frontswap_init(unsigned type)
> >  	BUG_ON(sis == NULL);
> >  	if (sis->frontswap_map == NULL)
> >  		return;
> > -	frontswap_ops.init(type);
> > +	if (backend_registered) {
> > +		(*frontswap_ops.init)(type);
> > +		sds[type] = type;
> 
> This is weird, storing the type in an array indexed by type.  Hence my
> suggestion above about an array of booleans or a bitfield.
> 
> > +	}
> >  }
> >  EXPORT_SYMBOL(__frontswap_init);
> > 
> > @@ -147,10 +170,20 @@ int __frontswap_store(struct page *page)
> >  	struct swap_info_struct *sis = swap_info[type];
> >  	pgoff_t offset = swp_offset(entry);
> > 
> > +	if (!backend_registered) {
> > +		inc_frontswap_failed_stores();
> > +		return ret;
> > +	}
> > +
> >  	BUG_ON(!PageLocked(page));
> >  	BUG_ON(sis == NULL);
> >  	if (frontswap_test(sis, offset))
> >  		dup = 1;
> > +	if (type < MAX_INITIALIZABLE_SD && sds[type] == -1) {
> > +		/* lazy init call to handle post-boot insmod backends*/
> > +		(*frontswap_ops.init)(type);
> > +		sds[type] = type;
> > +	}
> >  	ret = frontswap_ops.store(type, offset, page);
> >  	if (ret == 0) {
> >  		frontswap_set(sis, offset);
> > @@ -186,6 +219,9 @@ int __frontswap_load(struct page *page)
> >  	struct swap_info_struct *sis = swap_info[type];
> >  	pgoff_t offset = swp_offset(entry);
> > 
> > +	if (!backend_registered)
> > +		return ret;
> > +
> >  	BUG_ON(!PageLocked(page));
> >  	BUG_ON(sis == NULL);
> >  	if (frontswap_test(sis, offset))
> > @@ -209,6 +245,9 @@ void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
> >  {
> >  	struct swap_info_struct *sis = swap_info[type];
> > 
> > +	if (!backend_registered)
> > +		return;
> > +
> >  	BUG_ON(sis == NULL);
> >  	if (frontswap_test(sis, offset)) {
> >  		frontswap_ops.invalidate_page(type, offset);
> > @@ -225,13 +264,23 @@ EXPORT_SYMBOL(__frontswap_invalidate_page);
> >  void __frontswap_invalidate_area(unsigned type)
> >  {
> >  	struct swap_info_struct *sis = swap_info[type];
> > -
> > -	BUG_ON(sis == NULL);
> > -	if (sis->frontswap_map == NULL)
> > -		return;
> > -	frontswap_ops.invalidate_area(type);
> > -	atomic_set(&sis->frontswap_pages, 0);
> > -	memset(sis->frontswap_map, 0, sis->max / sizeof(long));
> > +	int i;
> > +
> > +	if (backend_registered) {
> > +		BUG_ON(sis == NULL);
> > +		if (sis->frontswap_map == NULL)
> > +			return;
> > +		(*frontswap_ops.invalidate_area)(type);
> > +		atomic_set(&sis->frontswap_pages, 0);
> > +		memset(sis->frontswap_map, 0, sis->max / sizeof(long));
> > +	} else {
> > +		for (i = 0; i < MAX_INITIALIZABLE_SD; i++) {
> > +			if (sds[i] == type) {
> 
> Additional weirdness with sds.  It seems this whole for loop could
> just be reduced to:
> 
> sds[type] = -1;


How does this look? (I hadn't actually tested it, but did compile test
it)

>From f545530e9ef2b0623ab9e78d490595e3b7eaa3fa Mon Sep 17 00:00:00 2001
From: Dan Magenheimer <dan.magenheimer@oracle.com>
Date: Wed, 31 Oct 2012 08:07:51 -0700
Subject: [PATCH 2/2] mm: frontswap: lazy initialization to allow tmem
 backends to build/run as modules

With the goal of allowing tmem backends (zcache, ramster, Xen tmem) to be
built/loaded as modules rather than built-in and enabled by a boot parameter,
this patch provides "lazy initialization", allowing backends to register to
frontswap even after swapon was run. Before a backend registers all calls
to init are recorded and the creation of tmem_pools delayed until a backend
registers or until a frontswap put is attempted.

Signed-off-by: Stefan Hengelein <ilendir@googlemail.com>
Signed-off-by: Florian Schmaus <fschmaus@gmail.com>
Signed-off-by: Andor Daam <andor.daam@googlemail.com>
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
[v1: Fixes per Seth Jennings suggestions]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
 include/linux/frontswap.h |  1 +
 mm/frontswap.c            | 59 +++++++++++++++++++++++++++++++++++++++++------
 2 files changed, 53 insertions(+), 7 deletions(-)

diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h
index 3044254..ef6ada6 100644
--- a/include/linux/frontswap.h
+++ b/include/linux/frontswap.h
@@ -23,6 +23,7 @@ extern void frontswap_writethrough(bool);
 extern void frontswap_tmem_exclusive_gets(bool);
 
 extern void __frontswap_init(unsigned type);
+#define FRONTSWAP_HAS_LAZY_INIT
 extern int __frontswap_store(struct page *page);
 extern int __frontswap_load(struct page *page);
 extern void __frontswap_invalidate_page(unsigned, pgoff_t);
diff --git a/mm/frontswap.c b/mm/frontswap.c
index 2890e67..4e04549 100644
--- a/mm/frontswap.c
+++ b/mm/frontswap.c
@@ -80,6 +80,18 @@ static inline void inc_frontswap_succ_stores(void) { }
 static inline void inc_frontswap_failed_stores(void) { }
 static inline void inc_frontswap_invalidates(void) { }
 #endif
+
+/*
+ * When no backend is registered all calls to init are registered and
+ * remembered but fail to create tmem_pools. When a backend registers with
+ * frontswap the previous calls to init are executed to create tmem_pools
+ * and set the respective poolids.
+ * While no backend is registered all "puts", "gets" and "flushes" are
+ * ignored or fail.
+ */
+static DECLARE_BITMAP(sds, MAX_SWAPFILES);
+static bool backend_registered __read_mostly;
+
 /*
  * Register operations for frontswap, returning previous thus allowing
  * detection of multiple backends and possible nesting.
@@ -87,9 +99,16 @@ static inline void inc_frontswap_invalidates(void) { }
 struct frontswap_ops frontswap_register_ops(struct frontswap_ops *ops)
 {
 	struct frontswap_ops old = frontswap_ops;
+	int i;
 
 	frontswap_ops = *ops;
 	frontswap_enabled = true;
+
+	backend_registered = true;
+	for (i = 0; i < MAX_SWAPFILES; i++) {
+		if (test_bit(i, sds))
+			(*frontswap_ops.init)(sds[i]);
+	}
 	return old;
 }
 EXPORT_SYMBOL(frontswap_register_ops);
@@ -122,7 +141,10 @@ void __frontswap_init(unsigned type)
 	BUG_ON(sis == NULL);
 	if (sis->frontswap_map == NULL)
 		return;
-	frontswap_ops.init(type);
+	if (backend_registered) {
+		(*frontswap_ops.init)(type);
+		set_bit(type, sds);
+	}
 }
 EXPORT_SYMBOL(__frontswap_init);
 
@@ -147,10 +169,20 @@ int __frontswap_store(struct page *page)
 	struct swap_info_struct *sis = swap_info[type];
 	pgoff_t offset = swp_offset(entry);
 
+	if (!backend_registered) {
+		inc_frontswap_failed_stores();
+		return ret;
+	}
+
 	BUG_ON(!PageLocked(page));
 	BUG_ON(sis == NULL);
 	if (frontswap_test(sis, offset))
 		dup = 1;
+	if (type < MAX_SWAPFILES && !test_bit(type, sds)) {
+		/* lazy init call to handle post-boot insmod backends*/
+		(*frontswap_ops.init)(type);
+		set_bit(type, sds);
+	}
 	ret = frontswap_ops.store(type, offset, page);
 	if (ret == 0) {
 		frontswap_set(sis, offset);
@@ -186,6 +218,9 @@ int __frontswap_load(struct page *page)
 	struct swap_info_struct *sis = swap_info[type];
 	pgoff_t offset = swp_offset(entry);
 
+	if (!backend_registered)
+		return ret;
+
 	BUG_ON(!PageLocked(page));
 	BUG_ON(sis == NULL);
 	if (frontswap_test(sis, offset))
@@ -209,6 +244,9 @@ void __frontswap_invalidate_page(unsigned type, pgoff_t offset)
 {
 	struct swap_info_struct *sis = swap_info[type];
 
+	if (!backend_registered)
+		return;
+
 	BUG_ON(sis == NULL);
 	if (frontswap_test(sis, offset)) {
 		frontswap_ops.invalidate_page(type, offset);
@@ -226,12 +264,16 @@ void __frontswap_invalidate_area(unsigned type)
 {
 	struct swap_info_struct *sis = swap_info[type];
 
-	BUG_ON(sis == NULL);
-	if (sis->frontswap_map == NULL)
-		return;
-	frontswap_ops.invalidate_area(type);
-	atomic_set(&sis->frontswap_pages, 0);
-	memset(sis->frontswap_map, 0, sis->max / sizeof(long));
+	if (backend_registered) {
+		BUG_ON(sis == NULL);
+		if (sis->frontswap_map == NULL)
+			return;
+		(*frontswap_ops.invalidate_area)(type);
+		atomic_set(&sis->frontswap_pages, 0);
+		memset(sis->frontswap_map, 0, sis->max / sizeof(long));
+	} else {
+		bitmap_zero(sds, MAX_SWAPFILES);
+	}
 }
 EXPORT_SYMBOL(__frontswap_invalidate_area);
 
@@ -364,6 +406,9 @@ static int __init init_frontswap(void)
 	debugfs_create_u64("invalidates", S_IRUGO,
 				root, &frontswap_invalidates);
 #endif
+	bitmap_zero(sds, MAX_SWAPFILES);
+
+	frontswap_enabled = 1;
 	return 0;
 }
 
-- 
1.7.11.7


  parent reply	other threads:[~2012-11-02 18:28 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-31 15:07 [PATCH 0/5] enable all tmem backends to be built and loaded as modules Dan Magenheimer
2012-10-31 15:07 ` Dan Magenheimer
2012-10-31 15:07 ` [PATCH 1/5] mm: cleancache: lazy initialization to allow tmem backends to build/run " Dan Magenheimer
2012-10-31 15:07   ` Dan Magenheimer
2012-11-02 18:29   ` Konrad Rzeszutek Wilk
2012-11-02 18:29     ` Konrad Rzeszutek Wilk
2012-10-31 15:07 ` [PATCH 2/5] mm: frontswap: " Dan Magenheimer
2012-10-31 15:07   ` Dan Magenheimer
2012-10-31 17:05   ` Seth Jennings
2012-10-31 17:05     ` Seth Jennings
2012-10-31 21:42     ` Cesar Eduardo Barros
2012-10-31 21:42       ` Cesar Eduardo Barros
2012-11-01 15:30     ` Dan Magenheimer
2012-11-01 15:30       ` Dan Magenheimer
2012-11-02 18:24       ` Konrad Rzeszutek Wilk
2012-11-02 18:24         ` Konrad Rzeszutek Wilk
2012-11-02 18:27     ` Konrad Rzeszutek Wilk [this message]
2012-11-02 18:27       ` Konrad Rzeszutek Wilk
2012-11-03  1:21       ` Bob Liu
2012-11-03  1:21         ` Bob Liu
2012-11-14 16:25         ` Konrad Rzeszutek Wilk
2012-11-14 16:25           ` Konrad Rzeszutek Wilk
2012-10-31 15:07 ` [PATCH 3/5] staging: zcache2+ramster: enable zcache2 to be built/loaded as a module Dan Magenheimer
2012-10-31 15:07   ` Dan Magenheimer
2012-11-02 18:39   ` Konrad Rzeszutek Wilk
2012-11-02 18:39     ` Konrad Rzeszutek Wilk
2012-10-31 15:07 ` [PATCH 4/5] staging: zcache2+ramster: enable ramster " Dan Magenheimer
2012-10-31 15:07   ` Dan Magenheimer
2012-10-31 15:07 ` [PATCH 5/5] xen: tmem: enable Xen tmem shim " Dan Magenheimer
2012-10-31 15:07   ` Dan Magenheimer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121102182749.GB30100@konrad-lan.dumpdata.com \
    --to=konrad.wilk@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=andor.daam@googlemail.com \
    --cc=dan.magenheimer@oracle.com \
    --cc=devel@linuxdriverproject.org \
    --cc=fschmaus@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=ilendir@googlemail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    --cc=minchan@kernel.org \
    --cc=ngupta@vflare.org \
    --cc=sjenning@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.